Cannot be deactivated drivelock

Similar Questions

• Cannot be deactivated iCloud music library

  As the title says, I want to disable iCloud library iTunes music on my PC, but cannot do so.  I have absolutely no interest in using iCloud library and I'm sick of it telling me that my session has expired and asking me to connect whenever I run iTunes.

  After a decent chunk of time trying to understand what point, I found a lot of posts in line to turn it off I just have to go in the General preferences and uncheck the option that is just below "See Apple Music."  The problem is that I don't have this option.  Its literally not there.

  I guess that what has happened is that all of these messages refer to older versions of iTunes and everything what reason, this option has been removed in the subsequent updates.  If this is the case, please tell me that there is another way to disable iCloud music library.

  So I just kept going in the rabbit hole of apple support pages and eventually find the solution.

  https://discussions.Apple.com/message/29278770#29278770

  I forgot to mention, but I've never used iCloud music library or Apple's music, so I could not understand why he said my "session expired" when I never started a session at first.  And maybe that's why the option turn off never showed up in my preferences.

  The fact that the solution was simply to signout, restart iTunes and then reconnect you makes me think it must be a bug.  And because of the ridiculous difficulty, I had to find a solution its a particularly frustrating bug.

  I hope that this issue helps someone else who takes care of this *.

• Cannot be deactivated xcontrol

  Hello

  I created an XControl and I would like to disable this value changed event cannot be triggered. But if I disable it with a disable property, I can still generate event (see example).

  How can I disable XControl that it will no longer be admissible?

  Thank you

  Andrej

  Disabled button a normal would prevent a changed value event occurs (although a Value property node (signaling) would still fire) because the disabled state prevents the user from changing the value of the façade.  It is not just disable the events of the mouse over the control.

• Cannot be deactivated domain guessing version 37.0.2 to go to about.config

  Online suggestions have not helped, including going in Preferences > browser, because the browser is not in my version. What I need it to must stop geolocation requiring an entry "about.config" in the URL, but adds field bar ALWAYS guess www. for her, so I get error 'server not found '. Mac OS x 10.6.8. Thanks for your help.

  It is not about.config by a point, but Subject: config with a colon.
  topic: is a protocol such as http: and is used to access the built-in special pages
  You can open on: pages through the address bar.

  • http://KB.mozillazine.org/about:config

  I guess you are looking for this pref:

  • Geo.Enabled = false

  Note that Firefox will always ask for permission before using the geolocation.

  If geolocation is not used Web sites can do a reverse DNS glance upward from your IP address and is generally not very accurate.

  • http://www.Mozilla.com/Firefox/geolocation/

• Cannot be deactivated Simplepass for browser sessions

  Just recently purchased a HP Envy with Win7 and I try to disable the application Simplepass of arise so that in my browser sessions. I want to use Simplepass for Windows logins, but do not want to appear every time the browser sessions when I'm on a page that supports supported a login/password. I use RoboForm everywhere and I do not have the desire or need to use Simplepass for this function

  I disabled all of the checkboxes in the configuration of the Simplepass (unchecked the "sign in to my sites ', 'automatically remember all my sites 'Start to the top of my LaunchSite' but Simplepass always appears whenever I go to a site that allows to connect.)

  Installed in my system is SimplePass version 8.00.57 and I use Internet Explorer 11.0.9600.16521.

  Without uninstalling Simplepass altoghter, how can I disable Simplepass from popping up in my browser sessions?

  I found a solution.

  Log in with an administrator-level account.   In file Explorer, navigate to C:\Program Hewlett-Packard\SimplePass

  Find the "OPBHOBrokerDsktop" file and rename it to "xOPBHOBrokerDsktop".

  Restart your computer.

  On my laptop, I can now connect using my footprint digital, but once connected when I go to a website requires me to enter a user name and password, Simplepass dialog box above does NOT appear, and the newspaper in a normally produces.

  I hope this helps.

• Cannot be deactivated 'workspace Start. "

  See screenshot. To disable the workspace of start is greyed out. Why would it perhaps?

  

  Hi jdezego,

  Do you have a trial version of Photoshop CC2015?

  As this option is grayed out in trial version.

  If you're not testing, you are connected to the creative application of cloud?

  Kind regards

  Claes

• Cannot be deactivated the previous installations of generator 2 coldfusion

  I can't activate an installation of ColdFusion Builder 2 because it says that I have two adjacent facilities of CF Builder on two other computers.

  The other two computers of hard drives have been erased before CF Builder can be disabled.

  Thus, he still thinks they are currently used.

  What can I do?

  Ted C

  You must contact the Support from Adobe thru tank and ask that your activation reset.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• Disable "on the keyboard of the screen" _

  Cannot be deactivated "on the keyboard of the screen. already removed tick in the ease of access

  I'm sorry to learn the system restore does not work - I think that could be repaired for you if it's a software problem.  It looks like a hardware problem, but we will exclude software problems before you spend money get the diagnosis and, if necessary, repaired equipment (unless your system is still under warranty with Dell, in which case I would start a disturbance immediately - they may be able to help on the phone and if not they will guide you through the process of getting a technician to check the system).

  Maybe something happened to the drivers for your keyboard.  Go to the Dell Support site and enter your product key.  Who should provide information on your specific laptop.  Then look for the keyboard drivers for your system and your version of Vista and download and install.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html (or there may be a single downloaded executable file that run you just--I know not how this driver will be downloaded).  Once done, reboot and see if your keyboard works again.

  If this does not work, try a startup repair to boot from your Installation of Windows Vista genuine disc (or one you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.  When you reboot, the keyboard now works.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this is not the case, try a clean boot to see if another program interfering with the keyboard.  Here is the procedure: http://support.microsoft.com/kb/929135.  If the keyboard works of boot, then it's just a matter of finding the culprit, the origin of the problem.  Follow the procedures described in the article.  Once that is done, don't forget to return the system to normal operation.

  If the clean boot does not work, try to boot in safe mode (repeatedly clicking on F8 during the boot process until the menu appears) and see if you can use the keyboard there.  This can be very useful information to the narrowing of the cause and solve the problem (if it is not a hardware problem).

  If this does not help, we will check some of your system files and hard disk for corruption.

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  Try to put all the corrupt files here so that we can see if they can be repaired with good copies of the installation disc (unless there are too many).

  While in the command prompt, type chkdsk /f /r and enter and let it run.  She might want to plan itself to start at the next startup.  Okay, then restart so that the program can run. It will scan and attempt to resolve any corruption or bad sectors on your hard drive and remove especially as a potential cause.  Restart when done and see if the keyboard works now.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• NoScript installed accidentally, cannot get rid of it and JavaScript has been deactivated, even though it says that it is enabled - help!

  I accidentally installed NoScript when you try to remove the ads/pop-ups. Now it is at the origin of the problems on sites that I use regularly and I can't get rid of it. It does not appear on the Tools/Add-ons so I can disable and JavaScript has been deactivated, even though it shows as "Enabled".

  Help would be appreciated.

  It has never worked exactly as ghostery has never worked all that I get is not the extensions plugins

• Cannot change the password even after the deactivation of audit

  DB version: 11.2
  Operating system: Solaris 10
  
  We have a password verification function through which a password can be reused after 50 different password changes.
  But I want to disable this check and re - use a password.
  
  Profile of user SCOTT is DEFAULT. I put the password DEFAULT profile check the null function

  select profile from dba_users where username = 'SCOTT';
  
  PROFILE
  ------------------------------
  DEFAULT
  
  SQL> ALTER PROFILE DEFAULT LIMIT PASSWORD_VERIFY_FUNCTION NULL;
  
  Profile altered.
  
  SQL> select * from dba_profiles where resource_name='PASSWORD_VERIFY_FUNCTION';
  
  PROFILE                        RESOURCE_NAME                    RESOURCE LIMIT
  ------------------------------ -------------------------------- -------- ----------
  DEFAULT                        PASSWORD_VERIFY_FUNCTION         PASSWORD NULL
  
  
  SQL> password SCOTT
  Changing password for SCOTT
  New password: 
  Retype new password: 
  ERROR:
  ORA-28007: the password cannot be reused

  I tried at least as well, but still get the error ORA-28007

  alter user scott identified by xxxx ;

  No idea why this is happening?

  PASSWORD_LIFE_TIME search the DEFAULT profile - Oracle affect 180 days during the installation in 11 g. If the password has expired, you need to 'unexpire' account first and then change password.

• Deactivation and give to allow listeners ' TypeError: Error #1009: cannot access a property... ". »

  I'm pretty green with coding Flash, but I'm trying to disable the buttons for my MCs button when they are on the page they link to.

  I have all my listeners in functions such as:

  
  function enableButton1()
  {
  Btn1_hit.addEventListener (MouseEvent.MOUSE_OVER, Button1Over);
  Btn1_hit.addEventListener (MouseEvent.MOUSE_OUT, Button1Out);
  Btn1_hit.addEventListener (MouseEvent.MOUSE_DOWN, Button1Click);
  Btn1_hit.addEventListener (MouseEvent.MOUSE_UP, Button1Up);
  }
  function enableButton2()

  ... etc...

  I've also set up my removeEventListeners the same way:

  function disableButton1()
  {
  Btn1_hit. RemoveEventListener (MouseEvent.MOUSE_OVER, Button1Over);
  Btn1_hit. RemoveEventListener (MouseEvent.MOUSE_OUT, Button1Out);
  Btn1_hit. RemoveEventListener (MouseEvent.MOUSE_DOWN, Button1Click);
  Btn1_hit. RemoveEventListener (MouseEvent.MOUSE_UP, Button1Up);
  }
  function disableButton2()

  ... etc...
  

  Now, I tried three ways to transform their market.

  Using an EventListener:

  addEventListener (Event.ENTER_FRAME, buttonsSwitcher);

  
  

  function buttonsSwitcher(e:Event):void
  {
  If (this.currentFrameLabel is "Home")
  {
  enableButton1();
  enableButton2();
  enableButton3();
  enableButton4();
  }
  Else if (this.currentFrameLabel == 'Portfolio')
  {
  disableButton1(); <-turns off portfolio button when the Frame portfolio.
  enableButton2();
  enableButton3();
  enableButton4();
  trace (this.currentFrameLabel);
  }

  Or I could do it on MouseUp, which is what I prefer:

  
  function Button1Up(e:MouseEvent):void
  {
  ButtonsCont.Btn1.gotoAndStop ("1Out");
  ButtonsCont.Btn1.addEventListener (Event.ENTER_FRAME, StopClick1);
  }

  
  

  function StopClick1(e:Event):void
  {
  If (ButtonsCont.Square1.currentFrame == ButtonsCont.Square1.totalFrames - 1) //Waits for MC at the end before you continue.
  {
  disableButton1(); <-turns off the Portfolio button click the portfolio button.
  enableButton2();
  enableButton3();
  enableButton4();
  this.gotoAndPlay ("startPortfolio");
  }
  }

  Or I could simply add calls to function for the frameworks.

  On the frame marked the Portfolio:

  disableButton1(); <-turns off button portfolio when the portfolio framework.
  enableButton2();
  enableButton3();

  enableButton4();

  Everything still works fine until I have move from one page to another.  In other words, when he tries to reactivate Button1, I get an error no matter what method I try:

  TypeError: Error #1009: cannot access a property or method of a null object reference.
  at main_Scene1_fla::MainTimeline/disableButton1()
  at main_Scene1_fla::MainTimeline/StopClick1()

  Everything in my fla file is internal.  Nothing is loaded externally.  It is therefore not an error with load() functions.  What I am doing wrong?

  Apparently just there for you but do not flash.

  If drag an object in a keyframe and give it a name of instance and then drag that object even (or other) library to another keyframe and it give the same instance name, they are not considered the same instance by flash.

  There are other, more subtle ways to cause this problem.

  But if you delete all your keyframes, in layer of the object after the first that contains your object, you will have no problem.  then, if you add keyframes to the object layer, you will have no problems.  almost any other way you add this object to other keyframes causes this problem.

• T440s: battery if the deactivation cannot start

  Hi all

  I just got my T440s a couple of weeks. Stupidly, I ordered with only 4 GB of RAM, thinking I couple update myself if necessary (and it would be much cheaper this way).

  Well it seems that 4 GB is certainly not sufficient for my needs, so I ordered another stick of 4 GB. I installed, plugged the machine and he lit. And was greeted with the tone of a memory error. Probably the module is not seated properly, but I suppose it could be defective.

  In any case, you will notice that I said that I plugged it before lighting. This means that the internal battery has been reactivated. I can confirm that because she's going to start (and give me the error) without being connected and without the external battery connected. So my problem is, how do I disable the battery internal again to remove or reinstall the problem DIMM, given that I can't to the transactional UEFI/BIOS to disable.

  Help, please.

  I know, but just remove the added key as-is and see if the machine starts. If this is the case, enter the BIOS, turn off the battery voltage internal and try to put in place the new stick. If it starts successfully after that, then you can reactivate the battery.

• I get an error handler page DNS of Yahoo and cannot even access the Add-ons page to turn it off because it redirects me to the Yahoo DNS page immediately

  I've seen some suggested solutions to the problem of this solutions for error DNS Yahoo page extremely annoying, but they involve accessing the firefox add-ons page and the deactivation of different modules. The problem is that even when I try to go to the Add-ons page I immediately redirected to the DNS of Yahoo solutions page again.

  I erased my browser history and cache, hoping it would help, but nothing. Extremely annoying that I never installed anything - it just started after a Firefox update.

  Any help much appreciated.

  Open the Help menu and choose restart Firefox with disabled modules. Remove all of the offending extensions. For more information, see the "Uninstall from Firefox Safe Mode" section of the following article.

  • Cannot delete a plug-in (extension or theme)

• Error "cannot open file."

  I have problems with Pages 5.6.1 on my MBP. Everytime I try and open a project, or save a new one, I get a "cannot open file" error. "

  The files all work very well using iCloud web access and on another Mac and iPad but not on this one machine. Oddly, when I close the Pages and try to copy a file from disk to iCloud Pages on my Mac, I get the error message that says that the file is "updated".
  I've not yet deactivated and reactivated Pages in the player iCloud in system preferences settings - I wonder if someone could suggest an alternative.

  Right-click on the file itself before you open it.

  Click info

  Check around to see you have rights on the document or check if it is locked

• Cannot set the time zone of Moscow winter + 3 hours.

  Cannot set the time zone of Moscow winter + 3 hours.
  Set the time zone Minsk 3 after the GPS clock moves forward 1 hour, timezone is set back from Moscow + 4.
  It is an error of your software when you are ready to address this issue.

  Automatic deactivation date & time(Settings>Date&Time...)