Cannot be saved in DNG format in 14 elements

Similar Questions

• Cannot be saved in JPEG format and do not understand why

  I'm working today on many files, and for a reason, even if these are JPG files, when I save, the dialog box appears and wants to save it as a PSD. Anyone has an idea why it is doing this? It is wasting a TON of time because I have to change to JPG even if the file is already. I tried the option open as a JPG on any of them and it gives me the error message-"unable to complete your request because the file format module cannot parse the file.

  I'm in CS6 because there were too many problems with Photoshop CC.

  If you use the crop tool and "Delete the cropped Pixels" is unchecked in the Options bar at the top, then it will save as a PSD. You should check this option if you want to save it in jpeg format.

  Gene

• Objectives that cannot be saved in JPEG format in CS3

  I have been provided with some TIFFs that when I try to save in Photoshop CS3, in the drop-down list, JPEG is not an option.

  Someone at - it information?

  The only way to save them in JPEG format is to use the command 'Save for web and devices' 100 quality.

  Are your images in 8 bits?

• When I try to open an attachment I "Download cannot be saved, because an unknown error occurred."

  Title says it all. If I try "to open" an attachment, the download dialog appears, and the progress bar begins to fill, then it should be full I get the message:

  "The download cannot be saved because an unknown error occurred
  

  Please Try Again. »

  I can always save the files, but then I have to delete them (and it's just a hassle). Any help would be appreciated!

  Do not have an anti-virus. However, I understood what the problem was!

  It seems that he was not really affecting all attachments, simply *.pdf files (I did not know it since I usually get pdf attachments only).

  The problem is that my default pdf reader has been set on a plug-in that was not working. I changed it and all is well.

• Error in Windows Embedded studio this rchtx32.ocx cannot be saved.

  original title: Windows Embedded studio
  I try to install Windows embedded studio 2009 on Windows 2008 R2 (32 and 64 bit), and I get an error that rchtx32.ocx cannot be saved. I have cheked the directory that the file is in, run as administrator, including no correction of the problem. Has anyone else had this problem before?

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the MSDN forums. Please post your question in the MSDN forums.

  You can follow the link to your question:
  http://social.msdn.Microsoft.com/forums/en-us/category/EmbeddedWindows

  It will be useful.

• Win7 log in problems: "the referenced account is currently locked and cannot be saved in.

  I've seen a few posts related to this error, but nothing of quite like what I feel... My service company COMPUTER is perplexed and they have tried a bunch of stuff at the end server without result, so want to recreate the image on my computer, I don't want to just cause it's a pain.

  I have 2 computers in my workplace. A desktop and a laptop both running Win7 that connect on the server in domain of companies. I use the same username and password for both, of course.
  The problem is with the laptop. Occasionally when I try to log in, I get a notification "the referenced account is currently locked and cannot be saved in" and I can not connect. However, if I unplug the network cable and try it, it works. If I plug the power cable back in and lock the computer, restart the whatever, I can connect properly. However, after a few hours or days, it does the same thing.
  So I'm not completely locked out of the system. It's really annoying to have to disconnect the network like that.
  It has not always done this... It allows to work very well, but it seems to have just started for no apparent reason. The main difference between laptops and desktop, is that the laptop has Symantec PGP Whole Disk Encryption, while the office is not.
  Any thoughts on what may happen and what can I do about it?

  Hello

  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Please do not hesitate to contact us if you have other questions related to Windows.

• The referenced account is currently locked and cannot be saved in

  Hello

  About three days ago, I am entered the wrong password into my computer and received the error message, "the referenced account is currently locked and cannot be saved to." I let the computer turned on for a long time see if this resets eventually, but I get the same error message. There are no other accounts on the computer and I do not currently have a password reset disk or the Windows 7 installation CD. I tried to access the system settings to turn off the need for a password to log on to the computer and change the date and time system, so the time lock should be reset, but it did not work.
  Any help would be appreciated, especially since if I had reset and reinstall, I would lose a lot of files and programs that I have purchased, which would be expensive to replace. Another friend of mine had a similar situation, but the blocking period was 30 minutes, so I'm not sure what the problem is here.
  Thanks for your help!

  Your running your PC mode at high risk:

  -No disc reset
  -Only one single admin account
  -No backup file
  -No installation media for your applications (and maybe no list of product keys)
  -No CD repair
  Each of these steps takes only a little effort to implement. Without all in place, you are likely to get hurt someday. You can probably fix your current problem as follows:
  -Ask a friend to burn a CD to repair for you.
  -Start the computer with this CD.
  -Use a system restore to set Windows in a week.
  -Revise the list above.

• Gdiplus.dll error, point of entry DllRegisterServer was not found. This file cannot be saved

  Hello
  I have a HP laptop Compaq Presario R3000 running XP sp2.
  While trying to install software for my new HP laserjet printer 451color, I couldn't finish because my computer seems to have a problem with the file gdiplus.dll.  After a regsvr32 in the "Run" dialog box, I get the following message: "gdiplus.dll was loaded, but the DllRegisterServer entry point was not found.  This file cannot be saved. " This problem MAY occur in the past, while the installation of other software or printer, I don't remember, but I CAN get frustrated with it and simply ignored and passed without being able to use everything I tried to add. (I get so tired things does not in the way they are supposed to!)

  I've updated to SP3, which did not help.  I am considering a system recovery. I don't want to lose all my programs, drivers, etc.. I did a search and read as a:
  «Startup Repair replace only damaged or missing Windows startup files.» In a Windows XP repair install, Windows all files are replaced no matter whether or not they wish to. Note: If you use a disk to restore your computer manufacturer instead of an installation disc of original Windows download, a Startup Repair or repair install as stated in the above linked guides would not be possible. »
  I don't want to click on the wrong thing and screw this place! Can anyone tell me if these a repair overwrite of the windows file system is an option with the operating system microsoft windows xp home sp1 disk?
  Is there a better way to solve this problem?
  Any help is appreciated.
  Thanks, Jeff

  jeffbrom,

  While this article is not about the issue that you are experiencing it however has a patch to replace a bad file gdiplus.dll. Give the patch a whirlwind (it should replace and properly record) and I would like to know the results:

  http://support.HP.com/us-en/document/c00615478

  Good luck!

• Photoshop will not save the two layers of my doc. Both are visible, cannot merge, cannot flatten, cannot be saved in jpeg or tif

  Photoshop will not save the two layers of my doc. Both are visible, cannot merge, cannot flatten, cannot be saved in jpeg or tif. What I am doing wrong? How should I do? How to save my document?

  Hi micheleh,

  Try resetting the PS preferences

  • To restore preferences quickly by using a keyboard shortcut: press and hold Alt + Ctrl + Shift (Windows) or Option + command + shift (Mac OS) when you start Photoshop. You are prompted to delete the current settings. New preferences files are created the next time you start Photoshop.
  • What happens if you do not use the signature
  • Do you use third-party plug-ins in Psalm

  Concerning

  Rohit

• I just reinstalled Adobe Acrobat X 1 and I can't save files PDF that is sent to me. I just get "this document cannot be saved. There is a problem reading this document (21)"and then when I click OK I get 'not enough for the image' help!

  I just reinstalled Adobe Acrobat X 1 and I can't save files PDF that is sent to me. I just get "this document cannot be saved. There is a problem reading this document (21)"and then when I click OK I get 'not enough for the image' help!

  More information on this issue can be found here:

  https://forums.Adobe.com/thread/1672655

  A "quick" fix that worked for me was to uninstall Adobe... and download Adobe Reader 11.0 installation base.

  Then download each individual updates and run them sequentially.

  I installed back to the last update of security which is version 08 and were able to register under normal operations.

  You will need to disable the automatic updates to keep up with the 08 version, until Adobe fixes this problem in a future release.

  http://www.Adobe.com/support/downloads/product.jsp?product=10&platform=Windows

  Adobe Reader 11.0 - installer multilingual (MUI) AdbeRdr11000_mui_Std

  Adobe Reader 11.0.01 update - installer multilingual (MUI) AdbeRdrUpd11001_MUI.msp

  Adobe Reader 11.0.02 update - all languages AdbeRdrSecUpd11002.msp

  Adobe Reader 11.0.03 update - installer multilingual (MUI) AdbeRdrUpd11003_MUI.msp

  Adobe Reader 11.0.04 update - installer multilingual (MUI) AdbeRdrUpd11004_MUI.msp

  Adobe Reader 11.0.05 - all languages AdbeRdrSecUpd11005.msp security update

  Adobe Reader 11.0.06 update - installer multilingual (MUI) AdbeRdrUpd11006_MUI.msp

  Adobe Reader 11.0.07 update - installer multilingual (MUI) AdbeRdrUpd11007_MUI.msp

  Adobe Reader 11.0.08 - all languages AdbeRdrSecUpd11008.msp security update

• 14-bit NEF to DNG format convert

  Hi all

  given that I can't find definitive information on this... How Lighroom 4 deals with 14 bit NEF raw files (coming in this case a D7000) when he converted to the DNG format? All 14 bit color information kept or is it some sort of loss or the current conversion?

  See you soon

  Michael

  NEF-14 bits files will convert the DNG files with 14-bit resolution. There may be minor differences, the DNG format has different fields to the NEF format, so there is necessarily a process of translation, but there will be no loss of resolution.

  Sandy

• I can not eject a dvd from my drive iPhoto super-cannot see the drive open up Adobe Photo Elements and organizer and then apps get hung up "not responding" and cannot do anything - I've fixed dozens of times w msg success drive.  Help

  I can not eject a dvd from my drive iPhoto super-cannot see the drive open up Adobe Photo Elements and organizer and then apps get hung up "not responding" and cannot do anything - I've fixed dozens of times w msg success drive.  Help, please.  Thank you!

  Hello golden2,.

  I understand that you have a DVD picture in your SuperDrive drive, but it is not mount on the desktop and will not eject.

  Please, try the procedure described in this article using the disc is ejected.

  Get help with the SuperDrive slot on your Mac - Apple Support loading

  Do not eject discs or discs eject slowly

  1. If the drive ejects discs slowly or appears to have difficulty, insert and eject a disc several times. Check the disc to see if it has a label or other material stuck to the disc which increases the thickness. Remove the label if possible.
  2. If the disc does not eject, try pressing the eject on the keyboard button. Some older keyboards may use the F12 key to eject the disc.
  3. If the disc does not eject, try dragging the icon of the disk to the trash.
  4. If the disc will still not eject, try to hold down the mouse or trackpad button after you restart the computer. The Superdrive should attempt to eject the disc.
  5. If the disc still does not eject, reset the System Management Controller (SMC) and repeat steps 1 to 4.
  6. If the disc still does not eject, Contact Apple or an provider of services authorized Apple, or make an appointment with a Store Apple Store for further assistance.

  Take care.

• Iconia 8 cannot transfer files to the formatted Sandisk MicroSD card fat?

  Iconia 8 cannot transfer pix or formatted data to 64 g. Sandisk MicroSD card fat files?    Any way difficult?

  I tried to reproduce what you experience on the device, but have been able to copy files on the SD card without any problems successfully. How do you try to move the files? I didn't go in Astro Manager of files, search for a file on my Tablet and tap and hold on the file and select copy. Then, I went to the SD card in Astro, the directory I wanted to copy to and you click on paste. You can try and see if it works? If this is not the case, my best advice would be to try another SD card.

• cannot re - install photoshop after formatting

  I recently formatted my mac and everything is saved on my time machine, but I couldn't restore back upward, especially, I tried to download creative cloud to download photoshop and lightroom that I paid for my subscription for a full year for two of these request now when I checked the plan that I just couldn't find anything and even orders and product story that nothing appeared. !

  Download/install the desktop application, connect and install applications subscription.

  https://helpx.Adobe.com/creative-cloud/help/download-install-app.html

  Creative cloud to desktop

  https://helpx.Adobe.com/creative-cloud/help/creative-cloud-desktop.html

  Sign out, sign in | Creative office cloud app

  http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html

  Install, update, or uninstall applications

  http://helpx.Adobe.com/creative-cloud/help/install-apps.html

  Contact support - for the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• DNG - format not supported or damaged

  Well, I was filming a video in stop motion with my a7s, I take pictures in RAW (.arw) files, then I transfer all files on my mac and all convert to DNG using the Adobe's DNG Converter, then save it in a specific folder and now I try to import the DNG sequence in first pro cc15.3 and he only says : "Unsupported format or file damaged."

  It was the first time meeting this problem, all was well in previous versions.

  To the best of my knowledge, Premiere Pro will only import video RAW files, not images.

  CinemaDNG will work.  DNG will not.