Cannot burn CDs with Nero

Similar Questions

• Cannot burn CDs with hp memories disc creator error "drive no.

  Original title: lots of help!

  hope there, can someone help me with this one. I have creator of disc memories hp that allows me to create slideshows. Everything works fine until I have access to the secect setting and it says drive no.  Which means that I can't burn a cd. Can someone tell me how to find a cd burner that will wrk with my memories disc creator. MY home system is Vists Home premium version 6.0

  Hi LARRYHEUETT,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Uninstall and reinstall the application.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Method 2: Follow the steps in the article.

  Solving problems with HP memories disc creator software

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  For reference:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00041459&LC=en&DLC=&cc=us&product=78076

• Satellite L30-113 - cannot burn CDs or DVDs

  I have a Satellite L30-113. Recently my driver failed for my dvd player, until I was able to install a few things and burn CDs and DVDs. Now, I can't record CDs or DVDs.

  Nero and CDBurnerXP for CD/DVD ROM say 'cannot continue burning process as you did not choose the device for recording. CD/DVD ROM propities shows that it does not support recording CDs and DVDs.

  I uninstalled the driver and restarted my computer and it reinstalled the same as that which does not once again. I am a driver update search and xp tells me that the driver is up-to-date. I checked the Toshiba updates with none of these updates for CD/DVD ROM.
  I have no idea on how to fix this unit "corrupted".

  Hi mate,

  I had a similar problem on my Toshiba laptop. So here, I searched a little bin forum and I founded to delete upper and lower filters in the registry. I followed the instructions in this Microsoft article:
  http://support.Microsoft.com/kb/314060

  After that, I again was able to burn DVDs.

  In addition, updated driver from CD/DVD isn't necessary because this driver is part of the operating system.

• Can't burn CDs with Windows Media Player

  Hello

  I have problems with CD burning on my computer satellite phone. Had the laptop for a few months and have had no problems. However only found an extra software with the DVD drivers CD so downloaded it - big mistake!

  I had to restore in settings a few weeks that I could not delete the programs. That s all is well now, but since I was unable to burn CDs in Windows Media Player. I click on "burn" and nothing happens, and the right side says CD has nothing on the subject (it s a blank CD).
  All tried and checked my settings, etc, can't think of what it could be.

  Does anyone have any suggestions? I would be grateful for any help.
  Thank you

  Hello

  I guess that's because other applications have disabled the function of registration of Windows operating system.
  Go into the my computer and right click on the CD/DVD drive. Here, please select the properties.
  Click the recording tab and enable the option enable the writing of CD on this drive

• Satellite A210-16F cannot burn CDs or DVDs...

  Hi, I bought a Satellite A210-16f. I did the downgrade to XP Professional... Everything works fine, but I burn cds, dvdcs, audiocds can´t...
  I don't know if its problem of HW or SW problem... In Vista home I didn't try to burn a CD, because I reinstalled it XP.

  I use Nero 8, but after 3% of burn it show me error and Burning process failed
  Nero 7 shows me the same.

  I tried Toshiba disc creator and this SW shows me this:

  The ocured of following error to save data
  Stops the current process
  Error occurred during the registration phase...

  etc...

  Can U help me?

  Thanx

  Well, either it's a question madia or CD/DVD drive problem.
  Check another CD and DVD from different manufacturers.
  If the same thing happens to what different types of media, then it s a STRANGE HW issue.

• Cannot burn CDs or watch DVDs

  Am not able to burn CDs. The media player to rip music, but am not able to burn CDs.  Also unable to watch DVDs

  Hello rcaddy40,

  1. don't you make changes to the computer before it stopped working?

  2. don't you get an error when you try to play DVDs on your computer?

  I suggest that you run by following the below Fix - it. This will automatically diagnose and repair problems with your CD or DVD drive when trying to read or burn media:
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  If this does not work, I suggest that you follow the steps in the link below:

  http://support.Microsoft.com/kb/314060

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Problem: Burning CDs with Windows Media Player

  I'm having a problem with burning to a blank CD using Windows Media Player.  The songs that won't burn have a red "X" next to them and details of the mistake of saying "this file cannot be burned to a CD, because it is not on your computer."  I looked at the location of the file, and it is located on a web address.  I would really appreciate any advice you have to offer on how to solve this problem.  Thank you.

  The files must be downloaded to your hard drive.  Windows Media Player cannot burn files on the internet.  Are these songs to a music streaming service?  If so, they must be purchased before burning.

• cannot burn CD with WinXP-host VMware_Player_3.0 CentOS5-comments

  I gave up trying this with VMWP 2.5 and have moved to VMWP 3.0, even if my VM is provided for 2.5. I still cannot burn to a CD. I can connect to my D: or E: drives under the guest OS, which each is a burner that works well in native WinXP, but when I write that I have only the choice of an image, not the physical drive.

  I can not also create two CD players. When I add a disk in the VM:settings? Hardware tab it seems OK, but I get a drive will appear in the display of the computer.

  Help, please.

  jefferiksen wrote:

  I guess blocking the CentOS machine and restart effect was to run the processes you mentioned in a previous reply (haldaemon?)

  The Virtual Machine must always be stopped, not suspended, and preferably the product VMware closed when the changes to the Virtual Machine Configuration file and it is enough to say just have the .vmx file I provided you and swapped out while the Virtual Machine has been stopped, not suspended, while the problem would have been solved then!  BTW in the circumstances, only suspend you the Virtual Machine, then to stop/restart the kudzu and or haldaemon would no nothing because the Virtual Machine is still working with a copy cached the original .vmx file unmodified one and ultimately all this turns out be a mistake of the end-user!

• Satellite A200 cannot burn CDs

  I have an A200 - 1 GB and I can not burn CDs and DVDs only. I tried different programs, but it was the same thing.
  What can be the problem? I want to update my driver, but I don't know which driver is from the download page. So, please help.
  Thank you.

  Have you used the CD s mentioned in the user manual?
  As far as I know Toshiba recommends to use the CD manufacturers listed in the user manual

  However, the problem of material is possible in this case that replace the CD/DVD drive

  Good luck

• cannot burn CDs when I drag my music to burn list, wich Player do I use

  I write and play my own music and can not burn my playlist when I drag from the air to burn the list, can I use e-reader? I've tried both

  Hello

  1. what burning software do you use?

  2. do you get an error message?

  If you do not use Windows media player, and then follow the steps in this link to burn CD and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player

  If you are not able to burn CDs of any burning software, then try to run this fixit and see if it helps:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  It will be useful.

• Impossible to burn CDs with Windows Media Player

  Media Player

  I can burn CDs, it will say that I have the cd durty or I donth have my burner workin but I can burn in media center always shows that I have the full cd when is a new thank you

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Center

  Burn a CD or DVD in Windows Media Center

  You can burn different types of CDs and DVDs in Windows Media Center. This allows you to decide what type of DVD or CD you want to create, based on the way and you want to use to read the content after it is burned to a disc.

  And read the links there, too.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot burn CDs on Satellite Pro L10

  I have a Satellite Pro L10 and impossible to copy data files to DVD/CD player. I go through the process by using the Editorial Assistant and it appears to download the files, but finishes with a screen that says "cannot complete the CD Writing Wizard" and ejects the CD. The CD is empty, but the displayed size went from 720 mB to 647 mB of free space and total size.

  This was not always the case, because it worked when I first got the L10. The L10 has Windows XP

  Any ideas please?

  Hello

  Are you trying to burn the files using clean combustion of Windows?

  Hmmm I put t like this feature of Microsoft. I use a 3rd party software to burn data and files on CD or DVD.
  It s Nero burning ROM.
  This tool is really nice and I have not noticed problems using this software.
  You should also test this tool and I'm sure that you will be very satisfied.

  But back to the error message that appeared during the burning process;
  After a lengthy investigation on Microsoft pages, I found very useful knowledge base article Microsoft and information;
  http://support.Microsoft.com/kb/324129

  The error messageError: cannot complete the wizard of CD writing ofmay occur if the IMAPI CD Burner service is shut down. To resolve this problem, make sure that the service is running and that it has not been arrested. By default, the service is set to manual. Start the IMAPI CD Burner service and then test it by writing on a CD - R or a CD - RW. If the service is running, you may need to set the service to automatic if it does not start in manual mode.

  To set the service to automatic, follow these steps:
  1. click on start, run, type services.msc /s in the Open box, and then click OK.
  2. double-click on IMAPI CD - Burning COM Service.
  3. under the service status, click Start.
  4. try to write data to a CD.

  Good luck

• Satellite M70-173 - cannot burn CDs or DVDs

  Hello

  I have an old but expensive laptop (Satellite M70-173). The CD/DVD drive is a carpet * a UJ - 841 s and can currently only read DVDs and CDs
  I have Nero installed 8.3.7.1, but it does not allow me to burn any DVD or CD
  I have all the updates that are installed for Nero, have also removed the "upper and lower limits" in the registry.

  It is not a mark of DVD or CD that I have not yet tried, but they all are coasters.

  I have the following options:

  1. try to set the drive - either with the technical assistance of the forum or replace the disk, so I decided that it is a hardware error

  2 buy a new laptop - but also like some advise on how to "clone" of the current notebook that I have so many other programs installed that I bought over the years and do not want to lose.

  I made copies pdf of burning errors I can post if necessary.

  Any help is welcome

  Kind regards
  Juan

  Hello!

  > I made copies pdf errors burning I can post if necessary.
  Yes, I think it's a good idea. ;)
  Otherwise it of a bit difficult to help you.

  But what CDs and DVDs you tried to burn? I have good experiences with Verbatim and TDK. Check it!
  And you should burn on a lower speed for CD e. g. 16 x.

  Good bye

• Burning CDs with Windows Media Player in Windows 7. "Error: connect a burner and restart the player.

  Original title: CD burning with Windows Media Player in Windows 7

  When I try to burn an audio CD with Windows Media Player, I get the message "connect a burner and restart the player.

  I am able to burn audio CDs using ITunes, so I don't think that my CD/DVD burner is defective.

  Thanks for your help.  The "fix it" has not worked, but I checked the settings of my Nero 8, Nero Toolkit, Nero Burn Rights program, and he was the one who said "everyone has burn rights" or "nobody burn rights.  When I changed the option to "everyone", everything started to work properly.

• Satellite A40-231: cannot burn CDs or DVDs

  Hello

  I can play CDs without problem, but I can't write them and DVD. I tried with Windows XP default recorder (by Roxio as he said), Nero and Infra Recorder but still had the same problem. Combustion process begins and finishes without errors with all of this software, but when I check the contents of the CD later, I see that nothing is written there, the CD is just considered as empty, or sometimes seen with 0 MB of available space, 0 MB total space.

  I tried with the CD - r, CD - RW and the DVD but I got the same problem. I have 2 389 MB free in my disk space hard as he is seen by Nero for the ability of the temporary folder that it uses.

  My DVD-R /-RW is recognized by Windows XP without problem and also, I installed the latest firmware from the site Web of Toshiba.

  Here are my specifications:

  Toshiba Satellite A40-231
  Toshiba DVD - ROM SD-R6112 DVD-R /-RW DRIVE Firmware Version: 1333 (latest news on the site Web of Toshiba Driver)
  System dual boot: Windows XP SP2 and Linux Debian Sarge

  Hello

  In the manual of Toshiba, you compatible o is a list and supported the CDs and DVDs.
  You must use these mediums as they are tested and should work correctly.

  Another tip:
  Go to start > run > and start recording with a command regedit

  Delete values
  upperFilter and UpperFilter of this key:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  I've done on my laptop and noticed some improvements