cannot change the brightness of the lcd screen

Similar Questions

• Cannot change the login screen to display all users.

  I'm unable to change the sign on screen to display all users.  It is said to remove the client service for netware (CSNW), when I go to remove only the open is available.  The service has not been started.

  Where did you go to remove the Client Services for Netware?

  Go to network connections (start > run > ncpa.cpl > OK)
  Right-click on the icon for your network adapter (most likely, Local area connection), and then select Properties
  On the general tab, you should see a list under "this connection uses the following items."
  Select the Client Services for Netware, click to remove the check mark, and then click Uninstall.
  OK your way out.
  Restart (it is not automatically)
  After Windows starts, go to control panel > user accounts > Change the way users log on and outside
  Select the options you want and click on apply changes.

  The list of questions should normally (personal computers) include only 4 following:

  Client for Microsoft networks
  QoS Packet Scheduler (optional)
  Sharing files and printers for Microsoft Networks (only if you want to share files or printers)
  Internet (TCP/IP) Protocol

  If you do not see Client Services for Netware on the general tab of the connection to the Local network or if you still have the problem after uninstalling it this connection, examine the properties of other components in the network connections.  For some of them (e.g. Dial-up), the list of questions is on the network rather than on the general tab tab.

  If you can't find the Client Services for Netware for ALL network connections (and therefore cannot remove), reinstall it, and then follow the instructions above to uninstall.

  To reinstall:

  1. go in the network adapter Properties/General tab you use and then click on install
  2. make sure that 'Client' is highlighted, and then click Add.
  3. highlight "Client Service for Netware", click OK
  4. leave your PC restart.

• You cannot change the background screen position

  Hello all, so here's my problem. I just bought a brand new HP Pavilion dv6-1264.
  and everything works smoothly except for a small problem.

  I can change my wallpaper very well, but windows is not letting me change how my image is positioned. Can I change a picture to the image, but it is always set to "fill" ("fit to screen" as they say). I can not tile it and I can't focus. I don't know about you, but sometimes a little boring after a while. Please help me find a way to solve this problem.

  I have restarted my computer several times. I deleted and re registered photos. and I changed my settings to its high of 1366 x 768 display at slightly below 1280 x 768. nothing works. If you have anything to suggest, it would be fantastic.

  Thank you. :)

  through a few other searches. I found the answer I wanted.
  through the hp website, they offered me this solution that worked for me.
  so for anyone who has the same problem, I'll post it here for reference.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01232238&LC=en&DLC=en&cc=CA&lang=en&rule=2552&product=3979408

  Thanks again to Mecalith for your help. :)

• How to change the LCD screen?

  I have a t61p with LCD 1900 * 1200 WUXGA

  but the police is too small for me, I can fix the windows police, but in some applications, the fonts are not adjustable. It is therefore very difficult.

  how much I pay if I ask lenovo to change a lcd display with a lower resolution for me?

  http://www-307.IBM.com/PC/support/site.WSS/MIGR-67980.html

• Change the LCD

  Hi again,

  I think I've had a few 'Thinkpadmania '... I bought a cheap A31p ($99), 80 Gb HD, 256Ram and 15 "LCD (at least that was the description on ebay) the laptop arrived yesterday with a 14" screen, and installed Win XP. No, the model is AUU 2653. According to Lenovo's an A31. The good thing is that it works. The ATI graphics card displays its parameters that she can go to a resolution of 1600 x 1200. Can I change the LCD screen with a 15 "UXGA of an A31p?

  George

  You need the whole cover, including the inverter and the LCD cable. Covers are not interchangeable on 14 "and 15" A3x units, and locks are in different places as well... so you will need the framework of keyboard too...

  Not worth it in my opinion and I love A3x machines...

• How can I change the home screen on Windows 7 Professional?

  The splash screen displays animation of 4 different colored when you start windows. Y at - there a way for me to change the image of the screen? The image has no animation.

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you are facing problems with Windows.

  I would like to inform you that it is by default, you cannot change the splash screen image.

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Cannot change the gamma/brightness/contrast

  I got gf260gtx
  Cannot change the gamma/brightness/contrast in Control Panel NVIDIA in the desktop computer games became almost white but nothing happens in games managed mode full screen (windowed mode is ok). In 190.15 new TINT option and that there is market! at a time in the office and games.

  ALSO windows STANDART color calibration OPTION - works in the same way! (really, you can only change gamma, bridhtnes and contrast - have NO sliders to change...)
  
  Hello
  I'm back with my problem...
  Really nothing works for me so I dicided to go back to xp.
  Now there is new version of win 7 7600 and I tried - still no change...
  I tried all the drivers + eysy = no result.

  "I think that person just to use this option so no one have the same problem))
  -everyone I asked - just say ' I didn't I'm able to change the brightness it y.

  I tried:
  181.71_geforce_win7_32bit_international_beta
  182.06_geforce_winvista_32bit_international_whql
  182.08_geforce_winvista_32bit_international_whql
  182.46_geforce_winvista_32bit_international_whql
  182.50_geforce_winvista_32bit_english_whql
  185.85_desktop_win7_32bit_international_whql
  186.08_desktop_win7_winvista_32bit_english_beta
  186.18_desktop_win7_winvista_32bit_english_whql
  190.38_desktop_win7_winvista_32bit_english_beta

  I noticed - if a game (almost all the real big games) have its own brightness settings it just ignore nvidia control panel/color calibration in this issue, but if it's a little game without this option, it works fine...

  Hello, raf73

  We appreciate that you help test Windows 7!

  You will have to go on Support of Windows 7 forums on the following link to help solve your problem: http://social.technet.microsoft.com/Forums/en-US/category/w7itpro

  You may also contact NVidia support.

  Thank you.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite A300 Question on replacing the LCD screen

  I had a minor accident with my A300, which ultimately ended in me the screen cracking.
  (Yes, I know, what a fool. Believe me, it was a complete accident.)

  In any case, the after-sales service is closed until January 5, but I was wondering if anyone might know how a replacement screen would be me back?

  Will it cost me more than $80 just to have the 'thing' rated and side on, and I need to know about how I look, as I recently had my end of maternity payments, so we are a middle-income.

  Time to talk Abou...

  Change the LCD is a little tricky. You have to remove a lot of and remove the screws much.

  This is a forum user to Yes, so I think nobody with experience here's how. I think the best is you go in an ASP.

• How can I fix lines horizontal randomly and glitter for the LCD screens for HP Pavilion dv5 Vista?

  How can I correct random lines horizontal and glitter for the LCD screens for windows vista HP Pavilion dv5? Only, it happens randomly and can get all a few minutes at a time every few hours. The entire screen white and black and horizontal lines will appear during the flickering on the half top of the screen only. Nothing else changes. My sound is immutable, and none of my screens change the size or location. However, they may appear up and down during the flashing. Can someone give me an idea of what is wrong? I looked on Google for possible corrections, but most of them seem to be for refresh rate and I don't have a notch for this and can't change it according to the steps they offer.

  Read my initial response on what it takes to please.

  "See if this helps you:

  These lines indicate corruption graphics driver or lack of graphic material.

  Go to the HP Web site > Search a drivers and download article > search your laptop model number > your operating system > drivers for it: either video / graphic / Chipset (according to the wording it) > download and install the drivers.

  http://WWW8.HP.com/us/en/support-drivers.html

  If that fixed it, it seems to me be a problem of graphic material.

  Because it's a laptop; If under warranty, contact HP.

  If is not under warranty, contact a repair shop, local. »

  See you soon.

• Will set up the HP Photosmart 7510 new iMac OSX 10.7.3; Cannot get the home screen appears.

  Instead of the home screen, I get an error message ' no connection: your printer is not connected to a network. " If please connect to a network and try again. "I downloaded the software and latest drivers; my iMac recognizes the new HP printer.  But I must still be able to get the home screen to display on the printer so that I can do the basic settings.  I did the simple troubleshooting suggestions (for example, for printer disconnected from the socket wall and then plugged in;) I restarted the iMac; I uninstalled the software and drivers and reinstalled)... but no change, cannot get the home screen appears.

  The printer turned on, unplug the power to the back of the printer (not the wall) for 30 seconds.

  If this does not work, it seems that your printer is maybe defective.  Here's how to contact HP technical support: www.hp.com/go/totalcare (click on printers & monitors, there is a phone number on the resulting page).

• Cannot change the power state of VM: cannot...   (VMWare Workstation 7 on Debian Lenny)

  Hi all, I am new to this community. I recently installed VMWare Workstation 7 on a Debian Lenny (kernel 2.6.26.2 - amd64). I had no problem with it, but when I tried to start a Virtual Machine Windows Vista, which I created it, does not start. Error says windows "cannot change the power state of VM: could not find a peer valid to connect to". "" Any idea, please?

  Josber.

  It seems that the virtual machine has been suspended when your host is using a different screen resolution

  either change back to the resolution that you used when you suspenmded the machine virtual or delete the VMS.

  This will force the VM to do a cold boot

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• Cannot change the password using the question of security in l/min.

  We have an identity server. We have a lost password management application. There is a webpass and a webgate configured for the application of the LPM. The mode of communication is simple. The forgotten password feature does not work for the application of the LPM.
  
  Steps to re-create the issue
  --------------------------------------
  -In the form of connection, the user clicks on "I forgot my password"link
  -User enter 'User ID' and then click on submit
  -It redirects the user to a page of challenge question, the answer to the question the user and click on submit
  -The next page confirms the user had correctly answered the secret question. And invite the user to enter the new password, retype the password, and then click Save
  -When, click Save shows "cannot change the password. The screen is refreshed. The new password is not saved.
  
  Identity & Webpass - 10.1.4.2 BP08 Server version
  
  Thank you.

  Hello

  For the LPM error "cannot change the password" check if you set a "minimum age" in the definition of the strategy of password.
  "If you set a minimum age of 2 days for example, the user will not be able to change his or her password before 2 days after the initial setting of the password and you will have 'identity/oblilx/logs/oblog.log' shows: ERROR 0 x 00000901 lost_pwd_mgmt.cpp:264 'cannot change password' loginName ^ xxxxx" in oblog.log

  --> In our POC password minimum age has been set, and we have forgotten that we have in him... This is why we hade this error on the LPM scenario...
  --> After setting the minimum age to 0, the scenario LPM works every time

  Best regards

• Cannot change the incoming mail server. no text highlight

  I am unable to send mail from my Mac.  No problem with iphone or iPad. Cannot change incoming mail server as text is not highlighted.  Cannot change the server for outgoing (SMTP) mail. Cannot change the list of SMTP servers. Says offline.

  Hi Granny Smith 1.

  Thank you for using communities Support from Apple. Sorry to hear that you are having problems with mail. It's a little bit clear exactly what you see when you say that you cannot change any server info, but if you continue to have problems sending or receiving mail, you will find the troubleshooting steps in the following article useful:
  

  If you cannot send or receive e-mail on your Mac - Apple Support

  Kind regards.

• Cannot change the Apple ID

  I'm changing my Apple ID, but when I try to change ID, it does not show the ability to 'change e-mail address '.  How can I get that option?

  You cannot change the name of the device.

  Sign of your ID, then click on my Apple ID and change the ID (you can not change if it's an address to iCloud)

• Good for laptop - cannot change the ISP; keep returning to a previous provider

  Windows 7 laptop of my grandson, I'm migrating FIREFOX (excellent resource!) of my aging XP desktop. An existing Mozilla installation on the guarded device tries to connect to an ISP in Sydney (1000km) which kept out, I guess because the signal is too weak. Too far - on the Internet?

  Reinstalled my new ISP contact, reinstalled a fresh copy of Firefox, copied the old profile XP (just underneath the random string file name), but cannot change the fault. Firefox at startup tries to raise the old ISP (Sydney) and expires, and then allowing me to establish a manual connect with the ISP (my current) new.
  Perhaps a clue: in my Firefox troubleshooting info, change preferences, the browser start page is the address of 'old', with 'override mstone' ignore, what look like prints of registry entries, but I can't change all that - and maybe it's wise! An annoying secondary question: on arrival, the laptop listed no administrator user. So I am me came as an administrator, but I wonder if a past or current even Admin hidden could register (or other) entered resistant to change.

  Late discovery: the laptop is apparently infected with browser pirate btsearch.name. Search Google throws a series of removal procedures, and I'm now working through them.
  What Miss me?

  Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • Anti-Rootkit utility - TDSSKiller
  • AdwCleaner (for more information, see this other AdwCleaner download page)
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  This solve your problems? Please report to us!

• Tecra 9000 - no display on the LCD screen when you turn on

  I recently got a Tecra 9000 for cheap on eBay. I am experienced with the construction and repair of computers, but not so with laptops.

  The problem with this laptop, it's that do not display on the LCD screen when you turn on. It was just black, no backlight, nothing. I took the laptop all share, found no obvious problem. I had to turn it on and the screen lights up a few times trying to figure out the problem. Would it be a bad connection? Or something else?

  After getting it to start work, I'll try to start to put it back together and it stopped working again. I haven't not been able to reduce it to know if it's a bad connection or a card problem.

  Someone at - it suggestions? This is a problem for others here?

  As you describe the issue, I think it is somehow a bad connection or a damaged cable, because it does not work once you have disassembled the screen.
  Maybe you need to check all the cables, leading motherboard to the LCD and take a close look, maybe for a few scratches or strong curvature.