Cannot change the/etc/oratab file or a problem of Autostart on linux!

Similar Questions

• Cannot change the Vista hosts file

  I started Notepad as administrator and open my hosts file, made my changes, but when I try to save it I get this message: cannot create the c:\windows\system32\drivers\etc\hosts file verify that the path and the name are correct

  How to save this file? Thanks for any help!

  Hello

  The host files are linked to the internet explore and this is why it must be very careful when you change them. And this is the reason why they were safe as to change. We have a FixIT tool to assign default host files. It's here.
  http://support.Microsoft.com/kb/972034 also, here is the article that explains how to change the host files and the Lmhosts file in Windows Vista and Windows 7. You cannot change the Hosts file or the Lmhosts file in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/923947

   

  I hope this information helps you!

• Cannot change the long mp3 file

  Hello

  I use Audition 3.0.1.  As part of our research in collaboration with the Centers for Disease Control, we record telephone interviews that last usually about an hour.  We record using Stepvoice Recorder set in mono at 64 Kbps, 22050 khz frequency of registration.  One of our investigators somehow managed to let Recorder run for more than 14 hours, by creating a file of 2.95 GB in size.  I can read this file using the Stepvoice Recorder or Windows Media Player.  I can open the file in Adobe Audition, but it opens as a block full of random noise.  My goal is to be able to truncate everything except the first hour of the audio in this file.  I tried opening mp3Pro and Raw PCM with the same result. Whatever it is, the hearing pushes me with the dialog box "interpreting Sample Format under" and I select the sampling frequency = 22050, channels = Mono and resolution = 16 bits.  Then I'm greeted by the dialog box "PCM RAW files (without header)" with "16 bit PCM Intel... "selected.  I just click Ok here because I don't know what to say.  Then I get a big green block of the noise.

  Does anyone know the secrets to get the Audition to open this file and I'd like to truncate?  Are there other (preferably free) products that would allow me to do this?  Any help appreciated... Thank you!

  Bruce

  Hearing opens all files in .wav files. What are uncompressed to the original .mp3. The maximum size of a .wav file is 2 GB (a little more than 3 hours of CD-quality audio). It so there's no way that hearing can open your file, even if you can make him understand the file format correctly. You must truncate before presenting it to the hearing. Something like MP3Cutter should be able to do it for you.

• Cannot change the hosts file in Windows Vista Home Premium

  Posted on behalf of a client:

  Cannot change the hosts file in Windows Vista Home Premium. Read-only value.

  Help, please.

  Hello

  I suggest you to try the steps below and check if it helps.

  Method 1: Try to take possession of the host file and check to see if the same problem happens.

  To apply permissions to a file or a folder:

  a. right click on the file or folder and then click Properties.

  b. click the Security tab and then click Edit.

  c. do one of the following:

  ·         To set permissions for a user who is not listed under group or user names, click Add, type the name of the user or group, click OK, select permissions and then click OK.

  ·         To change or remove permissions for a user or an existing group, click the name of the user or group, select the permissions and then click OK.

  For more information, see the article mentioned below:

  What to know before applying permissions to a file or a folder:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  Prevent changes to a file or folder (read-only):

  http://Windows.Microsoft.com/en-us/Windows-Vista/prevent-changes-to-a-file-or-folder-read-only

  Hope this information is useful.

• Cannot change the name of the file in the file properties.

  Original title: Cannot change the file properties

  Some downloaded files have a value in the box "title" under the details (after clicking Properties)
  I can't remove this 'title' and it appears so when I share the file on my network.
  The file is located on a portable hard drive, but I tried to move some files from problem to my office to see if I could solve these problems there, but nothing has worked.

  I already have
  -taking possession of the object
  -allows full control for all users
  -tried to use the "attrib - r + s' function
  -among other...

  I just want to know if there is a way to change the details of the file. On another windows help page it says something along the lines of "some attributes cannot be changed" I hope this isn't the case.

  Any help at all would be great, if no additional information is needed let me know.
  Thank you

  This information is set when the file is created.  Windows has no native ability to change.  You need a third party program.  For example, see link below.  Note that I have no idea if it's any good or works in Windows 7.  Gives you the link just to get an example of what to look for.

  abcAVI Tag Editor
  http://abcAVI.kibi.ru/

• cannot change the font color of office files in windows 7

  cannot change the font color of office files in windows 7
  always white and I want black (because of the background of the desktop which is necessary for my work)
  I have not finf sollution in internet
  Please help me

  Hello

  Follow these steps to change the color of the font of the desktop folder.

  a. right-click on a vacuum of space on the desktop and click on personalize.

  b. click on the link to the color of the window at the bottom of the window.

  c. click the link Advanced appearance settings .

  d. Select the element in the Office.

  e. If you want to change the font, then under police pick the one you want.

  (f) to change the font color, corresponding to the location of police, you have options to change the color of the size and characteristics of the police.

  g. you can make the changes you want.

  h. click on apply and OK.

  i. now, check to see if that makes a difference.

  I hope this helps.

• Cannot change the file details

  I can't change the details of file on a few songs and a few videos.
  I can change the name of the file, but nothing in the details section of properties.

  I checked the security and made sure I have total control and that I own the property, which did not help.

  Thanks for your help

  Change in library view, instead of going to file properties, click a track and press F2 to change the data.

  If it was useful, you can vote by clicking on the green triangle. If it solves the problem, click on propose as answer. Thank you!

• Error "Windows cannot access the specified device, file, or path. You can not have appropriate permission to access the item.

  Hello

  I have already read many answer to this problem here, but unfortunately none of this applies to me. I have a Windows XP and for some time I've always started some message when starting my laptop on rundll32.exe on my desk. I checked and I have this file in my system folder. Since this morning, I became suddenly unable to use any application like Skype, messenger other messengers etc. I can't even run my AVG scan for viruses and not can't open most of the programs in the control panel including Security tab / does anyone have an idea how can I get rid of this virus, or at least turn back my applications, I can use?

  Hi Platamon1980,
   
  -Remember to make changes to your computer after that this problem started to happen?
   
  First, try the steps listed in the following article to fix rundll error message:
   
  This problem occurs because of a missing or corrupted Rundll32.exe file.
   
  Cannot find the Rundll32.exe file when you open Control Panel
   
  Check if this solves other problems also.
   
  Keep me updated on the status of the issue.

• Cannot change the power state of VM: internal error

  Hello

  I freshly installed OS elementary which is based on Ubuntu.

  VMWare Workstation installation worked fine, but after creating my new virtual machine with a Win 10, the same message comes to me:

  Cannot change the power state of VM: internal error

  I looked a little in the log file, found this dump was set to zero, they changed in etc/security /, but that's all I've managed to find.

  Here is my log file

  Thanks a lot for your help

  PS: I'm leaving a beginner in the Linux world, so explanation would be welcome

  Hello

  Welcome to the VMware community forums.

  I don't think that the problem is related to a beginner linux user, it's a problem triggered by a specific hardware configuration.

  If you look at your log file again, there is an error just before the vmware process attempts to core dump. The dump is a reaction to the problem.

  vmx| E105: PANIC: VERIFY bora/vmcore/vmx/main/timeTracker_user.c:238 bugNr=148722
  

  If you then put the bug number into google, you get:

  http://KB.VMware.com/kb/1227

  Which indicates in return you can set a configuration file to specify the actual frequency of your processor.

  Your processor is an Intel (r) Core i5-3570 CPU @ 3.40 GHz

  The linux variant of the config.ini file they speak on windows hosts is/etc/vmware/config

  --

  Wil

• The former "cannot change the power state of virtual machine: the process has exited with an error: end of the error message" thing again (Fedora 8/Server 1.08)

  OK, this problem beautifully undescriptive I've seen caused by what seems to be dozens of things happening for me.

  I made the mistake of horrible update my FC8 kernel to the latest one (2.6.26.8 - 57.fc8).  Mind you, that's all that's changed.  It was with a 1.06 server with happiness and perfectly good computers running virtual in use before the upgrade.

  After the new kernel and reboot, I had to rebuild vmmod.  I had to get a fix of any - any later that I used with my previous kernel (116 does not solve the problem of compiling) so I used all-any117d.  Update like a champion.

  Try to turn on a VM and Ihanta!, the above error.

  Nothing else was changed.

  I tried the upgrade to VMware Server 1.08.  Used all-new any117d - update OK.

  Error again.

  I have re-run the compilation, this time to say 'yes' to what the installation script to "adjust the permissions of all virtual machines in xxxlist" or whatnot.

  Error again.

  1. status of /etc/init.d/VMware

  Networking networking on/dev/vmnet0 is running

  Invited only on/dev/vmnet1 network is running

  Network invited only on/dev/vmnet8 is running

  NAT networking on/dev/vmnet8 is running

  Responsible vmmon module

  Loaded module Vmnet

  FWIW, I compile as long as root, but have always run VMware server from my UID nonroot.

  What now?

  I'm in the same boat.  Fedora 8 2.6.26.8 - 57.fc8 #1 SMP

  I have tried uninstalling/reinstalling v1.0.6 thru 1.0.8 with all 116 updates and 117d.   117D compiles with every version of server but when I try to turn on a virtual computer I get this error.

  Cannot change the power state of virtual machine: the process has exited with an error:

  vmxvmdb: name of the Index generated by the configuration file

  POST (no connection): Version mismatch with vmmon module: expected 138.0, obtained 168.0.

  You have a bad version of the module kernel "vmmon.

  Try reinstalling VMware Server.

  POST (no connection): failed to initialize the surveillance apparatus.

  Failed to initialize the virtual machine.

  End of the error message.

  I found several posts other people have this problem but

  they are months with no recent activity and nothing that solved the problem.  I found appeared

  to get a fix, one updated the all an update that corrects the problem for

  2.6.26 performing several nuclei, but the link for the update on TI-psycho appears to be dead.  Here is the link to the discussion

  http://Fedoraforum.org/Forum/showthread.php?t=199026&page=2

  Of course, I would like to know how to solve this problem as well.

  Thank you

• Cannot change the captions

  I have a form that was created by printing a worksheet excel to PDF, then we are changing in Livecycle ES - the form fields have been added.   However, we cannot change the captions for a group of radio buttons and options as insert text appear grayed out in the menu.   Is it just something weird about it because of how it was created?

  Sorry, I misunderstand the question.  When you import a PDF file (created from Word, Excel or any other application), you are presented with a dialog box that gives you two options... 'Create an interactive form with fixed pages' or 'create an interactive form with a fluid layout.  If you select the option 'fixed pages', a form is created where all the master key is represented as an image and cannot be changed, also, only form 'interactive' objects can be added to the form, such as fields, radio buttons, list boxes etc..  As you have noticed, the "non-interactive" objects like "static text", and "rectangles" are disabled.  In addition, the non-interactive properties such as captions (static text) are also disabled.  LC Designer is bahaving as expected, it is supposed to give the form designer a very accurate copy of the presentation of the original document.

  If you import a PDF file and select 'Create an interactive form with a fluid layout', the 'standard' of the original PDF is editable and properties of objects, and non-interactive form Explorer (legends, etc.) will be available.

  Concerning

  Steve

• Good for laptop - cannot change the ISP; keep returning to a previous provider

  Windows 7 laptop of my grandson, I'm migrating FIREFOX (excellent resource!) of my aging XP desktop. An existing Mozilla installation on the guarded device tries to connect to an ISP in Sydney (1000km) which kept out, I guess because the signal is too weak. Too far - on the Internet?

  Reinstalled my new ISP contact, reinstalled a fresh copy of Firefox, copied the old profile XP (just underneath the random string file name), but cannot change the fault. Firefox at startup tries to raise the old ISP (Sydney) and expires, and then allowing me to establish a manual connect with the ISP (my current) new.
  Perhaps a clue: in my Firefox troubleshooting info, change preferences, the browser start page is the address of 'old', with 'override mstone' ignore, what look like prints of registry entries, but I can't change all that - and maybe it's wise! An annoying secondary question: on arrival, the laptop listed no administrator user. So I am me came as an administrator, but I wonder if a past or current even Admin hidden could register (or other) entered resistant to change.

  Late discovery: the laptop is apparently infected with browser pirate btsearch.name. Search Google throws a series of removal procedures, and I'm now working through them.
  What Miss me?

  Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • Anti-Rootkit utility - TDSSKiller
  • AdwCleaner (for more information, see this other AdwCleaner download page)
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  This solve your problems? Please report to us!

• Cannot change the Google search bar

  In Safari, I go to Google.com and do a google search. So far so good.

  Now, on the search results page, I try to edit the search in the Google search bar and nothing happens - the Google search bar is totally insensitive. To do another search, I use the address bar in Safari or reload google.com.

  I have deleted history, deleted all the data of the Web site, disconnected plugins and extensions, deleted the cache via the menu Developer. I used 3 CleanMyMac to clear and reset everything.  I can't solve the problem.

  Safari 9.0.2 (11601.3.9)

  OS X El Capitan 10.11.2

  Mac Mini (late 2014)

  A

  Please see below:

  Cannot change the Google search criteria in Safari

  B

  'CleanMyMac' is a scam and a frequent cause of instability and poor performance. Depending on which version you have, the developer's instructions may not completely uninstall. Please follow these instructions, then do as below.

  Please, back up all data before proceeding.

  Triple-click anywhere in the line below on this page to select this option:

  /Library/LaunchDaemons/com.macpaw.CleanMyMac2.Agent.plist

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ reveal in Finder (or just to reveal)

  the contextual menu.*, a file can open with a selected item. If so, move the selected item to the trash. You may be prompted for administrator login password.

  Repeat with this line:

  /Library/PrivilegedHelperTools/com.macpaw.CleanMyMac2.Agent

  Restart the computer and empty the trash.

  You may also delete one or more of these elements in the same way:

  ~/Library/LaunchAgents/com.macpaw.CleanMyMac.helperTool.plist

  ~/Library/LaunchAgents/com.macpaw.CleanMyMac.volumeWatcher.plist

  ~/Library/LaunchAgents/com.macpaw.CleanMyMac3.Scheduler.plist

  Never install "CleanMyMac" or something like that.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

• How to manually change the DNS zone files?

  I'm running OS X version 10.11.2 (El Capitan) and using App Server version 5.0.15 on a Mac Mini.

  I need to change the DNS Zone files manually because the DNS Server App Manager does not provide a U / I in order to add some elements (such as adding a delegation, etc.).  I use TextWrangler (5.0.2) as editor-in-Chief.

  I found an old post on how to do this here, but the information listed it seems obsolete.

  I was able to find the zone files to:

  / Library/server/name

  as:

  CBI .

  When I try to save or overwrite the db. files, or try to save all the files in that directory, I get an error indicating that:

  "Save the authenticated for this file failed (error application code: 20004).

  Since a window Terminal, if I go to that directory and type:

  Echo hello > temp.txt

  I get:

  Permission denied

  I am logged in using an administrator account.

  Before editing the db. files, I turned off the DNS in the App Server, then exit the server application server.

  What should I do to manually update the db. files?

  These files are protected from root.  You need to elevate your permissions to be able to change them.

  Probably you use a text editor like vi, nano or pico command line.  sudo vi/path/to/file for example.

  Back up the files first to protect against error.  In addition, be aware that Apple can run on some of your changes if you change the.app areas.

  Reid

  Apple Consultants Network

  Author of "El Capitan Server" - Foundation Services: available exclusively in Apple iBooks Store

  Author of "El Capitan Server - Collaboration & control": available exclusively in Apple iBooks Store

  Author of books of Yosemite server and server Mavericks

• You cannot change the format of the cursor

  Original title: mouse cursor

  Cannot change the format of the cursor; message says no file found - for example, C:\WINDOWS\Cursors\arrow\_rl.cur

  _rl.cur is not a slider that comes with XP. Nor is the folder named arrow. You must have installed a 3rd slider party system and I guess you are trying to change that.
  Try to reinstall it.