cannot change the loan only parameter in the file properties.

I tried to edit a photo that I have previously loaded to my laptop but it gave me an error message saying "this photo have not been modified. This file can be a read-only or that you are not allowed to save photos to the location."  I finally understand where that height was and it is actually extracted a single reading file but when I go to uncheck and apply and save and exit, he goes right to read-only.  This has never happened before, I edited the images of this album in recent weeks. Help

You must grant you full rights and perhaps even to take possession of the file and, possibly, its parent company or folders to remove the read-only attribute.  Here are some tips that can help you:

To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have:http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista:http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/. To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article:http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

To solve this problem with folders, folders takeownership or the reader (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  Here is more information on the ownership of a file or a folder:http://www.vistax64.com/tutorials/67717-take-ownership-file.html. To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article:http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

I hope this helps.

Good luck!

Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Tags: Windows

Similar Questions

  • Cannot change the file AdobeCaptivate.ini

    I just installed the latest version of Captivate on my new Zenbook and when I tired to record a demo, I got this message: "Capture is denied because the high-density display has been detected. "Please Set DpiAwareness = 1 in AdobeCaptivate.ini and restart the application.

    So I found the file, open it in Notepad and edited. But when I tried to save, I received this message: having said yes, I did not want to replace the file, the error message says that access is denied.

    What should I do next?

    Thank you!!

    Try to copy the file, and paste it on the desktop. Open it and change it, save it, and then drag it to the folder Adobe Captivate 9 x 64. It will ask you information Admin ID change the file, enter your creds and this job should .

    Jord-

  • You cannot change the file names more

    Why can I not change the name of my files and folders more?  One minute, he was working and the next one, only it just stopped.  He tells me that I have to get permission and then when I click on 'continue' to get permission it goes to another dialog box that says it didn't work and I give myself the opportunity to 'try' again and that does not work either.

    Hello

    Try a system restore before that happened.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    \

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Cannot change the file details

    I can't change the details of file on a few songs and a few videos.
    I can change the name of the file, but nothing in the details section of properties.

    I checked the security and made sure I have total control and that I own the property, which did not help.

    Thanks for your help

    Change in library view, instead of going to file properties, click a track and press F2 to change the data.

    If it was useful, you can vote by clicking on the green triangle. If it solves the problem, click on propose as answer. Thank you!

  • Adblock Plus working on main identitiy, stopped on the other profile, when I try to download it on another identity, "firefox cannot change the file'message.help please"

    don't know why, but the block of adplus works do not on the other account. When I tried to download it again, he says firefox can not complete... can not modify the file, help please, the amount of the pop ups and ads and the size of them is annoying to say the least. Thank you

    It is possible that there is a problem with the files that store the registry extensions.

    Delete the files (extensions.sqlite, extensions.ini, extensions.cache) extensions.* and compatibility.ini in the profile folder of Firefox to reset the extensions registry.

    New files will be created if necessary.

    See "extension corrupted files:

    If you see disabled extensions, is not compatible, in "tools > Modules > Extensions ' and then click the Tools button, on the left side of the search bar (or click on the"Find updates"button in older versions of Firefox) to check if there is an available update compatibility.

    If that didn't help then also try to delete the file addons.sqlite.

  • You cannot change the file association for .exe owner program

    Just bought new Win 7 Dell desktop running Home premium OS from an old XP computer file transfer.  I am a developer of s/w using a proprietary application that compiles the files of .xpa.  Using 'open with' when I try to associate the file .xpa at our request, it does not.  Instead:

    1. the request does not appear in the list of programs to associate even if it has an .exe file extension

    2. when I click on the .xpa file that I want to associate with the application, it is to be associated with a Windows Media file

    Don't know what to do.

    Thanks for any help.

    Hello

    The question you have posted is better suited for the MSDN forums. For help, please contact their help support team.

    http://social.msdn.Microsoft.com/forums/en-us/categories

    It will be useful.

  • Cannot change the files - & quot; project not found & quot; 404 error

    I followed all the instructions to create an editable region and save the site - everything works beautifully. However, when I click on the view/edit in the admin cpanel or command-E button when you view the page in a normal browser window it seems to process and then comes up with a 404 not found error.

    The page I'm trialing with it as:

    http://www.tuimotel.co.nz/template_test.html

    This is the error I get:

    'Not found '.

    The requested URL template_test_draft.html was not found on this server.
    Additionally, a 404 not found error was encountered while trying to use an ErrorDocument directive to manage demand.

    Apache/1.3.41 server at www.tuimotel.co.nz Port 80 "

    The search of this forum, I thought that it would be the problem of HTTP HEAD request, but server admins said that is already activated and works (as is the ftp size command).

    Help!

    Thanks a lot for your help (and patience). Administration server has the necessary changes and everything works fine now.

    Thank you

  • Cannot change the name of the file in the file properties.

    Original title: Cannot change the file properties

    Some downloaded files have a value in the box "title" under the details (after clicking Properties)
    I can't remove this 'title' and it appears so when I share the file on my network.
    The file is located on a portable hard drive, but I tried to move some files from problem to my office to see if I could solve these problems there, but nothing has worked.

    I already have
    -taking possession of the object
    -allows full control for all users
    -tried to use the "attrib - r + s' function
    -among other...

    I just want to know if there is a way to change the details of the file. On another windows help page it says something along the lines of "some attributes cannot be changed" I hope this isn't the case.

    Any help at all would be great, if no additional information is needed let me know.
    Thank you

    This information is set when the file is created.  Windows has no native ability to change.  You need a third party program.  For example, see link below.  Note that I have no idea if it's any good or works in Windows 7.  Gives you the link just to get an example of what to look for.

    abcAVI Tag Editor
    http://abcAVI.kibi.ru/

  • How do I change details in the file properties...

    I recently installed Windows 7 and love it.  I just started to use the Windows Media Center, and it is pretty cool also.  I have 1 issue though.  I have movies stored on my hard drive in the form of .avi files and when I list them as my movie library, rather than the view of the file name, wmc shows the name of the file listed in the "Details" section of the file property.  If "Top Gun.avi" may be listed as "TOP012" in wmc.  Any ideas how to either change the file properties in the section detail or how to change the path names appear in wmc?

    Thanks for the help.

    Martin

    Hi Martin,

    You may need to use another program to edit the label or the detail with the media file.  Details of the current file covers all the information detail inside the tag.
    A program may be able to change the tag with more details.  Try to load the file using Windows Media Player and change it.

    Hope this helps, Kevin
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Cannot change the hosts file in Windows Vista Home Premium

    Posted on behalf of a client:

    Cannot change the hosts file in Windows Vista Home Premium. Read-only value.

    Help, please.

    Hello

    I suggest you to try the steps below and check if it helps.

    Method 1: Try to take possession of the host file and check to see if the same problem happens.

    To apply permissions to a file or a folder:

    a. right click on the file or folder and then click Properties.

    b. click the Security tab and then click Edit.

    c. do one of the following:

    ·         To set permissions for a user who is not listed under group or user names, click Add, type the name of the user or group, click OK, select permissions and then click OK.

    ·         To change or remove permissions for a user or an existing group, click the name of the user or group, select the permissions and then click OK.

    For more information, see the article mentioned below:

    What to know before applying permissions to a file or a folder:

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

    Prevent changes to a file or folder (read-only):

    http://Windows.Microsoft.com/en-us/Windows-Vista/prevent-changes-to-a-file-or-folder-read-only

    Hope this information is useful.

  • Microsoft Movie Maker - cannot change the length of each clip.

    Cannot change the length of each clip on Microsoft Movie Maker.

    I clicked on 'tools', then 'options' in Microsoft Movie Maker after importing my media and organize my clips as the way I would like it. When I then click on the "Advanced" tab, image duration shows only 5 seconds with the transition period only 1.25 seconds, which is the default setting and that is also what I want. However, when I play my project in Movie Maker, it accelerates through each clip. I also noticed that when I press the title of 'Clip' in my headings at the top left and then click on 'Properties', the duration of each clip shows that only 00:02 seconds. Which is why my speed clips too quickly.

    I would have thought that setting my time of duration in the Tools section would then set in the Clips section, but this is obniously does not. I don't understand why everyone would show differently and wonder if you can help me to slow down the speed that my movie is playing.

    Thank you

    Cannot change the length of each clip on Microsoft Movie Maker.

    I clicked on 'tools', then 'options' in Microsoft Movie Maker after importing my media and organize my clips as the way I would like it. When I then click on the "Advanced" tab, image duration shows only 5 seconds with the transition period only 1.25 seconds, which is the default setting and that is also what I want. However, when I play my project in Movie Maker, it accelerates through each clip. I also noticed that when I press the title of 'Clip' in my headings at the top left and then click on 'Properties', the duration of each clip shows that only 00:02 seconds. Which is why my speed clips too quickly.

    I would have thought that setting my time of duration in the Tools section would then set in the Clips section, but this is obniously does not. I don't understand why everyone would show differently and wonder if you can help me to slow down the speed that my movie is playing.

    Thank you

    ================================
    The change of setting to: Tools / Options /.
    Advanced... tab applies only to the added clips
    to the timeline * after * you change the setting.

    If you switch to view "Storyboard" and select
    all of the clips as a batch (select one and the type...
    CTRL + A)... you can add the 'Speed Up, Double.
    or "Slow down, half" effect of changing the
    duration. Simply select all clips / right click
    the effect on the menu... Choose...
    Add to storyboard table.

    'Speed Up, Double' cuts the duration of half.

    "Slow Down, half ' double life.

    These effects can be added up to six times.

    If you need finer adjustment...
    the info may be useful:

    You can change the duration for each clip
    manually. Move your pointer autour the
    edge of an element until you see a double red
    arrow. Now, drag the double red arrow...
    you will see if show a ToolTip displays the duration
    train to change.

    Or... just to redo the project after changing
    the long-term: Tools / Options / Advanced
    tab.
    Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • Cannot change the folder name of the user, i.e. the C:\Users\user name (folder name)

    I got a new computer w/Windows 7, but Set - up guy was working on 2 computers and put the wrong name in this machine slot 'username '.  All seeking answers to correct (my machine automatically books with my ADMIN correct name but doesn't let me change an incorrect name in the USER file), I came across this on VISTA.  It also applies to Windows 7?

    "What you see is the reference in the"C:\Users\user name"folder. While you can change the registered owner and the name of the user account, you cannot change the name of the folder 'C:\Users\user name'. The only way to do this is to create a new admin account and delete the one in a new. »

    If the solution IS identical to that of Vista, the instructions on the following link apply?
    http://www.Vistax64.com/tutorials/93026-user-account-delete.html

    Yes, the solution is identical to that of Vista, and apply the instructions at this link.

    Create a new account with the correct name and delete the old account.  If you wish, save the old account during erasing files and copy them into the new account.

  • Cannot change the gamma/brightness/contrast

    I got gf260gtx
    Cannot change the gamma/brightness/contrast in Control Panel NVIDIA in the desktop computer games became almost white but nothing happens in games managed mode full screen (windowed mode is ok). In 190.15 new TINT option and that there is market! at a time in the office and games.

    ALSO windows STANDART color calibration OPTION - works in the same way! (really, you can only change gamma, bridhtnes and contrast - have NO sliders to change...)

    Hello
    I'm back with my problem...
    Really nothing works for me so I dicided to go back to xp.
    Now there is new version of win 7 7600 and I tried - still no change...
    I tried all the drivers + eysy = no result.

    "I think that person just to use this option so no one have the same problem))
    -everyone I asked - just say ' I didn't I'm able to change the brightness it y.

    I tried:
    181.71_geforce_win7_32bit_international_beta
    182.06_geforce_winvista_32bit_international_whql
    182.08_geforce_winvista_32bit_international_whql
    182.46_geforce_winvista_32bit_international_whql
    182.50_geforce_winvista_32bit_english_whql
    185.85_desktop_win7_32bit_international_whql
    186.08_desktop_win7_winvista_32bit_english_beta
    186.18_desktop_win7_winvista_32bit_english_whql
    190.38_desktop_win7_winvista_32bit_english_beta

    I noticed - if a game (almost all the real big games) have its own brightness settings it just ignore nvidia control panel/color calibration in this issue, but if it's a little game without this option, it works fine...

    Hello, raf73

    We appreciate that you help test Windows 7!

    You will have to go on Support of Windows 7 forums on the following link to help solve your problem: http://social.technet.microsoft.com/Forums/en-US/category/w7itpro

    You may also contact NVidia support.

    Thank you.

    David
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • The former "cannot change the power state of virtual machine: the process has exited with an error: end of the error message" thing again (Fedora 8/Server 1.08)

    OK, this problem beautifully undescriptive I've seen caused by what seems to be dozens of things happening for me.

    I made the mistake of horrible update my FC8 kernel to the latest one (2.6.26.8 - 57.fc8).  Mind you, that's all that's changed.  It was with a 1.06 server with happiness and perfectly good computers running virtual in use before the upgrade.

    After the new kernel and reboot, I had to rebuild vmmod.  I had to get a fix of any - any later that I used with my previous kernel (116 does not solve the problem of compiling) so I used all-any117d.  Update like a champion.

    Try to turn on a VM and Ihanta!, the above error.

    Nothing else was changed.

    I tried the upgrade to VMware Server 1.08.  Used all-new any117d - update OK.

    Error again.

    I have re-run the compilation, this time to say 'yes' to what the installation script to "adjust the permissions of all virtual machines in xxxlist" or whatnot.

    Error again.

    1. status of /etc/init.d/VMware

    Networking networking on/dev/vmnet0 is running

    Invited only on/dev/vmnet1 network is running

    Network invited only on/dev/vmnet8 is running

    NAT networking on/dev/vmnet8 is running

    Responsible vmmon module

    Loaded module Vmnet

    FWIW, I compile as long as root, but have always run VMware server from my UID nonroot.

    What now?

    I'm in the same boat.  Fedora 8 2.6.26.8 - 57.fc8 #1 SMP

    I have tried uninstalling/reinstalling v1.0.6 thru 1.0.8 with all 116 updates and 117d.   117D compiles with every version of server but when I try to turn on a virtual computer I get this error.

    Cannot change the power state of virtual machine: the process has exited with an error:

    vmxvmdb: name of the Index generated by the configuration file

    POST (no connection): Version mismatch with vmmon module: expected 138.0, obtained 168.0.

    You have a bad version of the module kernel "vmmon.

    Try reinstalling VMware Server.

    POST (no connection): failed to initialize the surveillance apparatus.

    Failed to initialize the virtual machine.

    End of the error message.

    I found several posts other people have this problem but

    they are months with no recent activity and nothing that solved the problem.  I found appeared

    to get a fix, one updated the all an update that corrects the problem for

    2.6.26 performing several nuclei, but the link for the update on TI-psycho appears to be dead.  Here is the link to the discussion

    http://Fedoraforum.org/Forum/showthread.php?t=199026&page=2

    Of course, I would like to know how to solve this problem as well.

    Thank you

  • Cannot change the captions

    I have a form that was created by printing a worksheet excel to PDF, then we are changing in Livecycle ES - the form fields have been added.   However, we cannot change the captions for a group of radio buttons and options as insert text appear grayed out in the menu.   Is it just something weird about it because of how it was created?

    Sorry, I misunderstand the question.  When you import a PDF file (created from Word, Excel or any other application), you are presented with a dialog box that gives you two options... 'Create an interactive form with fixed pages' or 'create an interactive form with a fluid layout.  If you select the option 'fixed pages', a form is created where all the master key is represented as an image and cannot be changed, also, only form 'interactive' objects can be added to the form, such as fields, radio buttons, list boxes etc..  As you have noticed, the "non-interactive" objects like "static text", and "rectangles" are disabled.  In addition, the non-interactive properties such as captions (static text) are also disabled.  LC Designer is bahaving as expected, it is supposed to give the form designer a very accurate copy of the presentation of the original document.

    If you import a PDF file and select 'Create an interactive form with a fluid layout', the 'standard' of the original PDF is editable and properties of objects, and non-interactive form Explorer (legends, etc.) will be available.

    Concerning

    Steve

  • Cannot change the incoming mail server. no text highlight

    I am unable to send mail from my Mac.  No problem with iphone or iPad. Cannot change incoming mail server as text is not highlighted.  Cannot change the server for outgoing (SMTP) mail. Cannot change the list of SMTP servers. Says offline.

    Hi Granny Smith 1.

    Thank you for using communities Support from Apple. Sorry to hear that you are having problems with mail. It's a little bit clear exactly what you see when you say that you cannot change any server info, but if you continue to have problems sending or receiving mail, you will find the troubleshooting steps in the following article useful:

    If you cannot send or receive e-mail on your Mac - Apple Support

    Kind regards.

Maybe you are looking for