Cannot close Windows IE 8 start window

Similar Questions

• Cannot close windows while on the internet

  original title: help

  I can't close all windows when I'm online, I need to update a driver?

  Hello
  • What windows you're not able to close?
  • Are you able to close the windows if you're not online?
  • If it works much earlier?
  • What changes has been made recently to the computer?

  I recommend you perform the clean boot.
   
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

   

• I need to replace a motherboard with a new another brand, what files or drivers that I need to delete not close up with problems starting in windows 7 pro oem

  I need to replace a motherboard with a new another brand, what files or drivers that I need to delete not close up with problems starting in windows 7 pro oem current motherboard works but is old and has problems with heat. Not worried about having to re-record software am just worried starting problems

  Friday, October 19, 2012 19:03:30 + 0000, * address email is removed from the privacy * wrote:

  I need to replace a motherboard with a new another brand, what files or drivers that I need to delete not close up with problems starting in windows 7 pro oem current motherboard works but is old and has problems with heat. Not worried about having to re-record software am just worried starting problems

  Two points:

  1. it is unlikely that your current installation would work if
  you have changed motherboards. You need to reinstall itself.

  2 but you cannot use your current copy of Windows if you change
  motherboards, not even if reinstall you it cleanly. The largest
  disadvantage of an OEM version, is that its license it binds permanently
  the first computer, it is installed on and Microsoft believes that
  If you change the motherboards, another computer. It can never
  legally be moved to another computer, sold or transferred (except with)
  the original computer). If the computer dies or is stolen, your
  license dies with him.

  Ken Blake, Microsoft MVP

• Cisco Security Agent cannot close port 135/tcp on Windows hosts

  Hello

  I met with the problem that Cisco Security Agent cannot close port 135/TCP on PC windows (XP or Win7).

  I configured the network access control module to prevent all client/server connections to port tcp/135 of the rule.

  I checked my police using nmap, so this port (TCP/135) 20 minutes shows as filtered and I see connect event monitor on the CSA MC, over the next 20 minutes he see as open and no newspaper doesn't show. (not exact time, then it maybe 30 minutes or 5, this varies)

  Can someone explain how TCP/135 works and it is possible to close it using the CSA?

  Thanks in advance

  There is another question for the same problem on the forums (see: CSA 6.0.2.145 problem with windows firewall 7). I wrote: -.

  "I advanced and tested in the laboratory with winXP and CSA 602-149 (later). I've defined a rule with DENY tcp/135 and ran the nmap and reports of open (wireshark performances to the syn syn - ack). I changed it to a REFUSAL of PRIORITY and now closed nmap reports (wireshark shows restore the syn). Through the CLI, netstat - a watch the pc listening on tcp/135 & disabling the syn CSA Gets the syn - ack response. For me, this means a few flaws. 1: DENY should block tcp135 syn & 2: CSA does not send reset (it needs to be reset). Is it possible to open a TAC case and put my name (mwinnett) in it, and I'll open a defect. »

  Matthew

• ADE 3.0 crashes on Windows 7.  Transfer screen continues to operate. Cannot close ADE without restarting the computer.

  ADE 3.0 under Windows 7.  If I transfer a book at my e-reader, the screen freezes in the 'transfer' and seems to keep loading even if the book is already present in the drive.  Cannot close ADE without restarting the computer.

  Right click to the digital edition and run as admin.

• Cannot close Adobe Premiere cs 6.  I have to use the Task Manager.  I have 10 windows and uninstalled and reinstalled several times.

  Cannot close Adobe Premiere cs 6 I have to use the Task Manager.  I have 10 windows and uninstalled and reinstalled several times. Anyone know how to solve? 

  Hello world

  I "solved" the problem, or at least found a work around.  The program must be open as administrator.  Right click and open as administrator.

  If we don't do that all the time, set manually as open as administrator every time will strive do - follow the directions on the following link...

  Always run a program in administrator mode in Windows 10 - CNET

• Cannot install windows XP KB951847

  Cannot install windows XP KB951847.

  Fernando,

  KB951847 is an option, not the security update. Feel free to hide it.

  I. - stop the automatic updates service:

  Start > run > (type or copy/paste) services.msc > [OK]
  Double-click automatic updates > click stop
  (Stopping the service will take a moment)

  II. - remove the contents of the download file:

  Start > run > (type or copy/paste) %windir%\SoftwareDistribution > [OK]
  Open the download folder and delete its content
  Close the window.

  III. - open Internet Explore (only!) to http://windowsupdate.microsoft.com & run a CUSTOM scan. Uncheck the box/deselect KB951847 and hide ("don't show me this update"). -right click it once HIDE

  Tip: If an update of root certificates is listed in updates software optional (in the menu on the left), install it to take full advantage of enhanced Internet Explorer security, but do NOT install any other optional software , nor updates optional hardware , just hide them, too.

  I V. - start the automatic updates service:

  Start > run > (type or copy/paste) services.msc > [OK]
  Double-click automatic updates > click Start
  (Starting the service will take a moment)

  `~`

  The current time and the date now in Baja California, Mexico

  09:19
  Saturday, August 24, 2013
  DST - 0700 UTC
   
  UTC/GMT is 16:19 Saturday, August 24, 2013
              
  Current weather conditions in San Felipe

  Sunny86 ° F / 30 ° C

• I am trying to install a new printer, but I get "due to an unidentified problem, Windows cannot display Windows Firewall settings? Can anyone help?

  I am trying to install a new printer, and to do that I know I have to disable firewall settings. I try, but I get "due to an unidentified problem, Windows cannot display Windows Firewall settings? Can anyone help?

  I tried to go into Windows and change the settings of the firewall, but I get the same message.

  I also tried to run an update of the Windows security updates, but same message.

  I use Windows XP Professional Service Pack 3

  Any help would be greatly appreciated?

  Thank you

  M

  HI Maria/Winston.Not, trying to be coy but. I've never had close the firewall to load anything. It will be, or at least should invite you to make a choice to leave the program to run or not? Nevertheless.If you have windows activation hurt you firewall can reactivate manually without going through the bugs that you can not. If you click Start and choose the runtime application. Type cmd, and then press ENTER. When the command prompt box appears type "netsh winsock reset" without the quotes. He'll say firewall reactivated and ask for a reboot. Restart the computer and it will be active again. Just trying to help.

  Hi Winston/Hewlit,

  Thank you both for your advice.
  While waiting for your answers, I pushed all sorts of buttons and downloaded all kinds of programs in the hope that I could break the firewall (Hewlit the printer I tried to install says to disable the firewall to install the printer, and then turn it back on?).
  After a reboot, the message 'corrupt windows\system32 etc' file came and asked me to put in the original disc of Windows XP, I did not.
  Cut a long story short, I have now booked for a technician to come out as I'm totally lost.
  Thanks again for your help,
  M

• cannot access windows update - windows freezes a startup (error 0x8007043C)

  original title: cannot access windows update - windows freezes a start-up

  Error number: 0x8007043C when I try to access windows update. I tried to restore my computer to an earlier date without result. Windows hangs after login. Not sure if this is a update problem or another problem.

  Error number: 0x8007043C when I try to access windows update. I tried to restore my computer to an earlier date without result. Windows hangs after login. Not sure if this is a update problem or another problem.

  Do some basic cleaning and updates that may resolve your problem (also - check your time and date - as well as your setting time zone...)

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you will use the aggressive version if given a choice):
  How to reset the Windows Update components?

  Reset.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• Cannot install Windows 7 on Envy 14-1211nr of HP recovery disc sent twice

  Cannot install Windows 7 on Envy 14-1211nr of HP recovery disc sent twice

  The Recovery Manager starts well. He correctly completed the following steps:
  1 format HDD

  2. copy the files from the CD to the drive. It copies all the 3 CD.

  Then he ask the driver (the 4th CD) CD. Once I have this CD, then after awhile I get messge below:

  Contact HP support

  In most cases, recover the hard disk will solve your problems.

  If your problem persists, you may have to contact HP support. Find details of support HO in the documentation of your PC.

  After that I see above meaage the only button I can click is "Finish". Once I click on finish, then in a minute, I get a message that "recovery completed successfully.

  The laptop restarts and displays the message on the screen "Bootmger" not found

  I called HP support and asked to run the hard drive and memory test and he succeeded.

  I can install windows on another CD I have with.

  But I can't install WIndows using the recovery CD, I received from HP. It's the 2nd CD series that I received these don't work or the other.

  I have two identical laptops. Tried installing on both and having the same problem on both.

  Can you please help with this.
  HP sends fake CDs?

  Kind regards

  Hello

  Here is another solution, you can try to see if you can get Windows 7 to install correctly.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• Cannot install Windows updates (has no status) on the computer desktop and laptop

  Desktop               (Purchase date: 13/07/2010)

  Model: Pavilion p6402f or 6402f

  Product: BK275AA #ABL

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 1 64-bit

  Product ID: {removed privacy}

  Portable               (Purchase date: 14/07/2011)

  Model: Pavilion g6 Notebook PC

  Product: QD317UA #ABC

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 164-bit

  Product ID: {removed privacy}

  Description of the problem: same problem on the computer desktop and laptop at the same time began: cannot install Windows updates (has no status)

  No hardware changes or software recently made to the system: I followed the usual procedure to install Windows updates.

  Method of connection: wireless

  Technical expertise: intermediate level

  Performed troubleshooting: because the error # 80071 A 90 type indicated by the system, I followed the instructions of Windows Help and Support, for example to run Microsoft Fix it which did not work; a more advanced method has also been used, who recommended to start Windows Update in Mode safe, then open Windows Update and install the updates and then restart normally. At this point, the problem was that any stage of Windows Update was available.

  Hello amib004,

  As much as I know, only Windows Update cannot be run in safe mode. That being said, I saw where install several updates may conflict with each other. Try to disable all updates installation and install the updates failed one at a time.

• Close window Subvi

  Hello!

  I built a Subvi to a VI Oscilloscope that performs the analysis of the signals.

  Users should be able to open and close the Subvi window, but I can't make it work like I want.

  He needs to do is:

  -Open the Subvi when an on-off control is clicked and start calculations

  -close window calculations and stop the Subvi

  -Repeat passages that every time that the user needs

  I built what:

  -Open the Subvi with the key and start the calculations correctly

  -When I close the window Subvi it opens again stopped whith calculations

  -After a new closure, if I open the Subvi with the key it doesn't calcuates not

  -After clicking the button it finally starts working again

  I have attached the Subvi and an example VI reproducing the loop containing the Subvi.

  You know a better (and more correct) way to make it work?

  Thank you!

  Mike

  I just noticed a race condition mean you have as well.  If you switch the button after the terminal has been read, but before that the local variable is written to, your rocking button could be ignored accidental due to the locale of your user name.

  What I would do with this Setup would be to launch the Subvi as a parallel process.  The VI can maintain its own State and what not.  You can then use the user events and/or queues to send data to the other process.

• due to an unidentified problem, windows cannot display windows firewall settings

  I am running win xp home edition SP3, cant acess windows firewall. I get the following error message: due to an unidentified problem, windows cannot display windows firewall settings

  Any ideas on how to solve this problem?

  "Due to a problem not identified, Windows cannot display Windows Firewall settings" error, try:
  Start > run regsvr32 hnetcfg.dll [Enter]
  MS - MVP - Elephant Boy computers - don't panic!

• Firewall problem: "due to an unidentified problem windows cannot display windows firewall settings.

  I can't turn on my or even access my firewall settings. When I try I get the following message, "Due to an unidentified problem windows cannot display windows firewall settings" help?

  Hello
  Follow these instructions to fix the Windows Firewall:
  Download and install repair Windows: 
  http://www.TechSpot.com/downloads/5314-tweaking-Windows-repair.html
  When the repair of Windows opens, click on the tab to start repairs, click Start. Unselect all the boxes except for the following:
  -Reset the registry permissions
  -Reset the permissions of files
  -WMI repair
  -Repair Windows Firewall
  Then click Start. Once it is finished, restart your computer. Let me know if this helps you.
  Brian

• fixing older XP that needs updating. Error Msg 0 x 80245003. cannot access windows update.

  fixing older XP that needs updating. Error Msg 0 x 80245003. cannot access windows update. Help!

  Microsoft fix it wants tool return me to windows update to download some updates IT must first which is no help...

  Hello

  1. Open command prompt.
  2. type net stop wuauserv, and then press ENTER.
  3. Type rmdir /s %windir%\softwaredistribution\wuredir and press enter
  4 type net start wuauserv, and then press ENTER.
  5. try to install the updates again.