Cannot conect to the internet with vista "dependency service or group could start."

Similar Questions

• Unable to connect to networks wireless on laptop Windows 7 Enterprise. Cannot start the autoconfiguration WLAN service. "Error 1068: the dependency service or group could start."

  original title: cannot start service autoconfiguration WLAN and EAP services

  I am not able to connect to my wireless network. When tried to connect, it shows just "unable to connect."

  I have the Intel WiFiLink 5100 adapter with the latest driver for Windows 7 Enterprise 32-bit installed. The laptop is not a wireless connection manager and I am trying to connect using the Windows wireless connection manager.

  I checked in the Services and found that service autoconfiguration WLAN and Extensible Authentication Protocol services are not running.

  When I tried to start the WLAN auto configuration service, I get the following error...
       Windows could not start the service WLAN autoconfiguration on Local computer.
       Error 1068: The dependency service or group could start.

  When I tried to start the service of Extensible Authentication Protocol, I get this error...
       Windows could not start the service on Local computer Extensible Authentication Protocol.
       Error 1053: The service did not demand launch or timely control.

  I found that all dependent services for the EAP are running. And all dependent services for autoconfiguration WLAN service are running except the EAP service.

  I searched the internet for the solution madly before posting here. Any help is greatly appreciated!

  Take a look at this > http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/f9b835f2-c2da-43b9-883f-2b2a157c3921

  This link has the solution that worked for me.

• No firewall or Internet, Windows Firewall errors: "0x8007042c" and "error 1068: the dependency service or group could start.

  Problem started when the McAfee Firewall shuts off and I could not turn it back on.  Also I can't activate Windows error 0x8007042c firewall.  Also no Internet access due to firewall restrictions.  Tried to manually turn the Windows Firewall service (as an administrator), but now get error 1068: the dependency service or group could start.  Strangely, the McAfee Firewall seems to be OK again?

  McAfee and click OK in the same sentence? Hmmm... Take a look at this site for some good information and instructions for the removal of malicious software.

  http://www.selectrealsecurity.com/malware-removal-Guide/

  I hope this helps.

• "Windows failed to start the service on Local computer print spooler. Error 1068: the dependency service or group could start. »

  I fiddle with my startup programs and now I have this error message: "Windows could not start service on Local computer print spooler.  Error 1068: the dependency service or group could start. "There is no printer listed everywhere and nothing works.

  Hi Jkoryzna,

  Thank you for choosing the Microsoft Answers forum.

  To solve the problem, fix the dependency for the spooler service information.

  Click Start, run and type the following text:

  CMD /K SC CONFIG SPOOLER DEPEND = RPCSS

  Alternatively, to achieve this by using the Registry Editor:

  Click Start, run and type Regedit.exe

  Navigate to the following branch

  HKEY_LOCAL_MACHINE-SYSTEM-CurrentControlSet-Services-spooler

  In the right pane, double-click the DependOnService value

  Delete existing data and then type RPCSS

  Close Regedit.exe.

  
  REGISTRY WARNING

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Navigate through the steps mentioned in the article below.
  Solve printing problems by resetting the print spooler.

  http://support.Microsoft.com/kb/2000007

  Let us know if this helps

  Concerning
  Anthony.

• Windows could not start the print on local computer service. Error 1068: The dependency service or group could start.

  I can't add a printer.  I constantly receive the associated printer spooler error messages and specifically "Windows failed to start printing on local computer service. Error 1068: the dependency service or group could start. "I tried to restart, tried"FixIt"MicroSoft application... all to nothing does not.  Help?

  Thank you!

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  They will help you with your printer issue in Vista Hardware and drivers Forum above.

  See you soon

  Mick Murphy - Microsoft partner

• Windows spooler printer 8 error 1068: the dependency service or group could start.

  Just upgraded to Win 8 ENT x 64 Win 7 ENT x 64.

  I thought, maybe I need to restart the service. Go in Services, look to the top of print spooler and select restart.
  But I get an error:

  "Windows failed to start the Service on local computer print spooler.
  Error 1068: The dependency service or group could start.

  "Okay, so I go into properties and see what are the dependencies.
  Attached image:
  

  RPC is running, however, no FAX.
  Go to Fax and just getting started. I get the error 1068
  Focus on dependencies here.
  Attached image:
  

  IM lost at the moment.
  Any help would be greatly appreciated.

  I ran sfc/scannow and found no problem.

  Please notify.

  I found this somewhere else and this fixed my problem

  I had the same problem and I have created a batch file that I have run as Administrator:

  CMD /K SC CONFIG SPOOLER DEPEND = RPCSS

• Firewall Windows gives me "error 1068: the dependency service or group could start" I am on Vista 64 bit.

  I use Vista 64 bit and my windows firewall does not illuminate. I tried to make a running manual but I get

  Error 1068: the dependency service or group could not start
  Things I've done:
  • ("Sfc/scannow") System File Checker - he says he found a problem in the Windows Firewall, but couldn't fix it.
  • MicrosoftFixit.WindowsFirewall.Run.exe Microsoft.com... problem persists
  I've done two things on the command line for (you) help to solve this problem:
  Queryex mpssvc C:\Users\Dan>SC

  Service_Name: mpssvc

  TYPE: 20 WIN32_SHARE_PROCESS

  STATE: 1 STOPPED

  WIN32_EXIT_CODE: 1068 (0X42C)

  SERVICE_EXIT_CODE: 0 (0X0)

  CHECKPOINT: 0X0

  WAIT_HINT: 0X0

  PID                : 0

  FLAGS:

  C:\Users\Dan>sc qc mpssvc

  [SC] QueryServiceConfig SUCCESS

  Service_Name: mpssvc

  TYPE: 20 WIN32_SHARE_PROCESS

  STARTUP TYPE: 2 AUTO_START

  ERROR_CONTROL: 1 NORMAL

  BINARY_PATH_NAME: C:\Windows\system32\svchost.exe k LocalServiceNoNe

  network

  LOAD_ORDER_GROUP: NetworkProvider

  TAG                : 0

  Display_name: Windows Firewall

  DEPENDENCIES: mpsdrv

  : bfe

  SERVICE_START_NAME: NT Authority\LocalService
  Help me, please?

  Hello

  I suggest that you follow the steps in troubleshooting provided in the link below to fix the problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/cannot-start-Windows-Firewall-Vista/d1d764c7-8978-48da-B1F1-bb3e394a9a2a

• cannot update the drivers, cannot conect to the internet with them

  I have a dell laptop that I had to rebuild, it has Windows XP and the installation went great.

  my problems is that I need drivers for ethernet, network, multimedia controller and a PCI Modem.

  I can not find them on the internet with my other PC, all I can find is a scanning software that will find them for me, but the PC I need them can not conect.

  Please someone help me!

  You go to Dell and enter the service tag of the laptop?

  http://support.Dell.com/support/downloads/index.aspx?c=us&CS=19&l=en&s=DHS

• Print Spooler error 1068: the dependency service or group could start. __

  I tried - unsuccessfully - restart the print spooler on a box of XP with SP3.  I read the previous posts for this error and this box refuses to restart the service.

  Is there an easy way to fix this without reverting to a system reset?  Can I run a repair?  If so, it will fix the problem?  I tried to run a restore of the system to a previous date and who could not do anything for me either.

  When you attempt to start the Print Spooler Service, error 1068 means "the dependency service does not exist. the dependency service or group was able to start. »

  Depending on your environment and your type of printer installed, your Print Spooler Service will have other dependent services that must run before the Print Spooler Service starts.  If the dependent services do not work, you will see an error 1068 or a similar message on the dependent services when you try to start the Print Spooler Service.

  Some Lexmark printers add their own XP services and start the Print Spooler Service, lists them as dependencies and that is why these Lexmark Services must run before the print service spooler will begin.  It may be listed as the LexBce Server.

  You now or have you ever have all installed Lexmark printers?  If Yes, do you still use Lexmark printers?

  Depending on your printing environment, if you use another type of printer, you can have other Service listed tab in the Print Spooler Service dependencies.

  Use the Applet of Services XP to check the dependencies of print spooler and options.

  Click Start, run and enter in the box:

  services.msc

  Click OK to open the Services Applet.

  Locate the Print Spooler Service, right-click, choose Properties, and then look at the Dependencies tab.  Services listed there must run before the Print Spooler Service starts.  If they don't, you'll get an error 1068 or a similar message on the dependent services when you try to start the Print Spooler Service.

  You should always see the service remote procedure call (RPC) and maybe a few others depending on the type of printer that you have installed (Lexmark printers can add some dependency Services to your configuration of XP).  All dependent services must run before the Print Spooler Service starts.

  Dependent Services may vary according to the type of printer that you have installed.

  The RPC service is also required for many other things to work properly and is usually still running and the autostart value.

  If the RPC Service does not work and does not start automatically, you can have other problems, but start with the easy stuff first.

  Of the Services Applet, find the service remote procedure call (RPC) and if it does not, right-click and start it and set it to automatic.

  Then find and all the other print spooler dependency services listed in the Print Spooler Service Dependencies tab.  They will be lance automatically the next time you reboot your system (if that is your desire), set the startup type for these Services to automatic.

  When everything works as you want, restart and check your Services again to be sure that they start correctly and solve any addition
  questions.

  If the remote procedure call (RPC) service is not listed as a dependency for your Print Spooler Service, you must inform XP that the print spooler service depends on the RPC service.

  Click Start, run, and in the box type (including important space after the "equal" sign):

  dependent on the spooler of sc config = RPCSS

  Click OK to assign the RPC service for the print spooler service, and then make sure that the RPC Service is running and start your Print Spooler Service.

  If you still can not understand it, react with the items that you see the tab of the Print Spooler Service dependencies.

  Don't forget to restart and check that everything works correctly after each adjustment.

  Please note that using the above command will effectively remove all the current (and perhaps old) Print Spooler dependency assigned for the Print Spooler Service and assign it only dependent on the RPC Service.  It would be 'normal '.

  The dependence of CPP Service would be typical of most facilities, or after you have uninstalled all the time some printers (Lexmark), but your printer may have a few other dependencies.  If it still does not respond, we'll fix it!

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Error 1068: The dependency service or group could start.

  When you try to start a few automatic services (who of course has not started automatically) I get this error. Check the list of dependencies for each service they all list the HTTP Service. I have run this command: beginning of config sc = HTTP request and get a message that it succeeded, and restart the computer. No change. I run and do not restart the computer - no change. I ran sfc/scannow just in case he might find something but nothing. I even reinstalled the upgrade of Windows 8 thinking it could replace all of the corrupt files. No change. I wonder if it can also be the source of some other problems I'm having. With a certain Windows update for example.

  Any help would be greatly appreciated.

  After you determine that the 'http' service was one of the dependencies for the print spooler start, and after finding that there is no such service listed, I came across this answer, which will allow you to CHANGE the dependencies. Basically, I deleted 'http service'. Click on the link below and scroll down to "method 3".

  http://www.techsupportall.com/solved-print-spooler-error-1068-the-dependency-service-or-group-failed-to-start/

  Obviously this response of mine is almost three years after the original question posted, but maybe it will help someone else in the future.

• «Cannot start service on local computer windows firewall.» Error 1068: the dependency service or group could start. »

  Hi, I tried many things resolve. I update my Vista last Kit. I also sort things like using CCleaner RegClean Pro...

  I also tried sfc/scannow
  and here's SOME of my journal:
  http://pastebin.com/wKBJGDpV
  and you can download the entire .txt file here: http://www.box.net/shared/gco69vkso2kh2y7jaxas
  I also tried this:
  C:\Windows\System32 >netsh winsock reset

  Unable to load the programme of assistance following DLL: WSHELPER. DLL.

  Unable to load the programme of assistance following DLL: IFMON. DLL.

  The following command was not found: winsock reset.

  I also tried to run and do the MicrosoftFixit.WindowsFirewall.Run.exe nothing works.
  Please and thank you.

  Hi, Jahkr,

  Log shows that you had corrupted files and components.  System File Checker could not repair files try to repair the files first.

  See this document for corrupted files

  http://support.Microsoft.com/kb/929833

  To resolve this problem, make sure that all dependent services have been started. To do this, follow these steps:

  • Click Start, run and type Services.msc
  • Double-click the network connections entry
  • Set its Startup type to manual
  • Click Start to start the service
  • Double-click Windows Management Instrumentation
  • Set its startup type to Automatic
  • Click Start to start the service.

  After you start the services of two dependants, try to start the Windows Firewall service.

  http://www.Winhelponline.com/articles/145/1/error-1068-error-message-when-you-try-to-start-the-Windows-Firewall-service.html

• The network is acive: the dependency service or group could start.

  I can't go on the internet. The States Center network and sharing "service dependency or group falied to start." I have not performed a scan of malwar no chance. SFC scan/now found no errors. I did system restore and no luck. I checked the service and the "network Locatio Awareness" will not start I get the following error "Windows has no start the network location awareness service" error 1075: the dependency service does not exist or has been marked for deletion. I checked said etil depends on the RPC and the Protocol TCP/IP drivers and the two are running.

  Hi Anthony_1982,

  1. you remember recent changes to the computer?

  2. using a wired or wireless?

  You can try to check if the problem occurs in safe mode with network.

  Check out the link:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  You can also try to use the Network Diagnostics in Windows Vista and check.
  http://Windows.Microsoft.com/en-us/Windows-Vista/the-doctor-is-in-using-Network-Diagnostics-in-Windows-Vista

  Hope this information is useful.

• "the dependency service or group could start.

  Trying to open some applications I get this message.  How can I fix?

  Hello

  1 do these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------------------------------------------------------

  2. set ALL services back to their default values :

  Start - type in the search box-> find Services at top - click right on - RUN AS ADMIN

  BlackViper - Default Services - VIsta Service Pack 2 - scroll down to the default services
  http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/

  BlackViper - Default Services - VIsta Service Pack 1 - scroll down to the default services
  http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/

  =====================================================================

  If necessary after ALL the above, you can try an in Place upgrade/repair Installation that allows
  you keep the programs and data, even if redundant backups are always a good idea.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps.

• "The dependency service or group could not start" error

  SERVICE OF DEPENDENCE OR GROUP FAILED TO START

  My computer is really in trouble, because he always tells me that "the dependency service or group could start. I use a vista and cannot connect to the internet more. What can I do?

  Hi DR PEPEREMPE

  
  Do you get the error message when you try to connect to the internet?

  You can perform a scan of the SFC (System File Checker). It lists all the issues and will also retrieve all files if necessary. Follow the steps below to p Ed a SFC Scan -.

  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
  b. type the following command and press ENTER:
  sfc/scannow
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• The dependency service or group could not start

  I have accidentally infected myself with a friends virus. I've deleted successfully, and virus damage was left. The biggest damage that they let me Internet, error, it says. "The dependency service or group could start" and I have internet on all my other computers, but it is said that to my laptop. Could someone help? (YES, I DELETED THE VIRUS)

  Hello

  ·         When exactly do you get this error message?

  ·         You get this error message when connect you to the internet?

  ·         What internet browser do you use? (Specify the browser: Internet Explorer, Firefox, etc.)

  Method 1:

  You can perform a scan of the SFC (System File Checker). It lists all the issues and will also retrieve all files if necessary.

  Follow the steps below to perform a Scan of the SFC.

  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow

  
  b. type the following command and press ENTER:

  sfc/scannow

  
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.

  
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.

  
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".

  
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link for more information on CFS below mentioned scan.

  http://support.Microsoft.com/kb/929833

  Method 2:

  I also suggest talk you the following Microsoft KB articles and check if it helps.

  Some services do not start in Windows Vista

  http://support.Microsoft.com/kb/943996

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems