Satellite A350 to problem 7 - ATI Catalyst Windows upgrade

Similar Questions

• Satellite A350 - strange problem with hitatchi HTS ATA 320 GB HARD DRIVE

  Recently bought a Toshiba Satellite A350 - still under warranty.

  My problem started with gel/delay of Windows whenever I transferred specific files.
  I found that a lot of my files are the same; It's then that I transfer or open these files - this can take 10 minutes to load crash, then displays a corruption error
  During this phase:
  The hard drive makes a slow repetitive scratching sound
  The laptop hangs for an average of 10 minutes before returning to a usable state - I found more than 15 files and suspect many more that are corrupt.
  I suspect a faulty hard drive, like the check disk crashes and my system hangs whenever I open / transfer of these files.

  I tried to reformat and install the new OS, but always check disk crashes and I lost a lot of important files, because they became unusable.

  Is there something I can do to remedy this
  or
  If the hard disk is defective, Toshiba will replace?

  BTW - I m in Australia.

  Hello

  Exciting announcement, but it will be interesting to know how exactly you do and what kind of data are responsible for this. I want to say I use laptop computers and can not say that some of the data makes my crazy HDD.

  If you really think that there is a problem with the disk HARD nearest Toshiba authorized service provider contact. They will check the functionality of the HARD drive, and if there is a serious hardware problem, you will get a new. Of course for free.

• Satellite L300D - accidentally uninstalled driver ATI Catalyst

  I have a Toshiba Satellite L300D laptop 13s with a model number of PSLC8E-02P013EN.

  I wanted to reduce my memory on my laptop and being the stupid person that I am I accidentally uninstalled the ATI Catalyst driver who was here.
  Therefore, everything on my screen became larger and less concentrated.

  It says it has a resolution of 1024 x 768, but I don't know if it was the same before hand. I tried to re - install the versions of the Catalyst driver again, but nothing seems to have changed since this laptop model has been abandoned, and I can't find any way to restore things to the crisp picture that they were once before.

  Usually after installing display driver, everything should be OK again. Your laptop computer was originally shipped with Vista. Are you still using the original version of Vista or Win7 maybe?

  In any case, display driver for your machine, you can find and download on http://www.toshiba.eu/innovation/download_drivers_bios.jsp

  Please, find the right driver and try to install it. Send comments.

• A problem with ATI Catalyst

  I just received the following message from Microsoft, due to an error.

  "ATI Catalyst has stopped working properly.

  A newer version of this software is available for download that resolves this problem. Advanced Micro Devices, Inc. recommends updating to take advantage of improvements to stability and security"

  Click here to download the update on the site of Advanced Micro Devices, Inc. When I followed the link to this site he asks me I don't understand questions about product family.  I had never heard of the ATI catalyst, so I don't know what product family to put it in, or if really necessary. Can anyone help?

  Chris

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  They will help you in the foregoing Vista Hardware and drivers Forum if you want to please you repost here.

  See you soon. Mick Murphy - Microsoft partner

• Satellite A350/07F - problem with scrolling of the docs

  Hello

  I have a question about the use of my Touch Pad of Toshiba Satellite A350/07F - laptop HNX.

  It turns out that after some time the search will stop automatically and then I have to restart my laptop so he could start again. It also stops to scroll down if I keep my cell blocked for an hour or two. No idea how to change the settigs so that this does not happen.

  Thank you guys.

  AFAIK for scrolling on touchpad it will be activated virtual bar on the right side of the touchpad.
  Try to check this in mice advanced settings where you can set all this. Disable this option and try to activate again.

  On my Satellite A300, it works fine.

• Satellite A350-22D - cannot activate the network (Windows 10) wireless adapter

  With Windows 10 Wi - Fi worked well. Suddenly three days it s active no more
  FN + F8 does not work.
  The switch in front of the computer or the other.
  At startup, the computer recognizes the card and then turns off the front LED.

  The card WiFi Intel 5100 AGN and pilots the latest work well.
  I uninstalled and reinstalled but no result.
  What can I do to get my Wi - Fi works again?

  PS: when I've been upgraded to Windows 8, it had the same problem...

  This old notebook was designed for Vista and support for Win7. No more than that.
  FN + F8 is controlled by special tool developed for the feature FN keys.

  As much I know Toshiba offers no update for this older model laptop.
  Let's see if any other A350 owner has found a solution for this.

  I have A300 with Win7 on it, but I don't want to test with Win10 due to all possible issues I have with her.

• Problem Driver ATI 9700 Windows Vista on a P10 792

  I tried Windows Vista beta 5308 in my Toshiba P10-792, and I was unable to get graphics accelartion with Windows Vista Driver for Ati 9700 graphics, which is is built in P10 - 792.
  It displays an error code 43.

  After some research, I found http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=268378&SiteID=1

  Some people suggested to get the last update of the bios for laptop. I've updated to the latest version of the bios, but the problem persists, someone has the same problem?
  Any help would be valuable.

  Thank you

  Hello

  Usually, you use the graphic drivers of Toshiba Toshiba laptops.
  I found the description of the error 34 on this site from Microsoft:
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 310123 #XSLTH3439121122120121120120

  34 error code: Windows cannot determine the settings for this device
  Solution:: the device requires manual configuration

  Well, the fact is that Windows Vista is not official on the market and there is a lot of necessary test. Moreover, Toshiba doesn't utter the graphics driver for Windows Vista at this time. In my opinion, wait for Toshiba graphic driver. I m sure that the original Toshiba graphics drivers will work in the future.

• Satellite A200-1FL: problem installing Bluetooth on Windows 7

  Hello world

  I have a Toshiba Satellite A200 1FL (PSAE6E) with Windows Vista and I just installed Windows 7 32 bit (no update or upgrade).

  The problem is that when I try to install the bluetooth stack, it installs all ok, but the driver.
  I took the version 7.10.12 for Windows 7 32 bit from http://aps2.toshiba-tro.de/bluetooth/?page=download.

  The driver installation window presents itself and the progress bar does not move.
  I waited for a long time and nothing, no response, so I have to cancel.

  However, the software has been installed and when I try to start Bluetooth config or any other tool, the same phenomenon occurs: the driver installation window shows upward and nothing.

  Also, I tried to follow the installation instructions of command since the drivers toshiba download page guess what drivers are each options.

  Can someone knows why this phenomenon occurs?
  Am I missing something or is there a known issue with the Bluetooth in Windows 7 driver?

  Thanks in advance,

  Jorge

  Hello

  On my A500 during installation Bluetooth driver, he invites me to activate the Wlan switch. I don't know if A200 is equipped with WiFi switch. If this is the case, turn it on and try to install. I have more no other suggestion.

• Satellite click 10 - problem installing drivers after Windows Installer 10 costs

  Model: LX0W-C-104

  So, I installed a new copy of Windows 10 on my 10 click that I came to regret.

  I could not install the sound drivers and wireless

  I have download the drivers from the Toshiba driver site, put on the laptop and running the installation. First the driver extracted, then a windows message appears, asking if I want to launch the program, I click on Yes, then nothing happens.

  CAN ANYONE HELP?

  Even if someone could use Double Driver (a program that allows the backup of the drivers) to back up the drivers and their email to me, I would be you owe a huge favor.

  I also tried to install Windows 8.1, but exactly the same thing happens

  Appreciate any help you can provide.

  Hi iteek,

  If you solve this problem, I have the same problem and can't fix the sound card driver.

  Thanks in advance

• Satellite Pro C850 - problems with WiFi after Windows update 8.1

  Hello

  I was wondering if someone could give some advice on a problem I have.

  Had an adjustable C850 Pro for a few months and worked well on Windows 8.
  I myself am then harassed and intimidated by Microsoft Update in order to install Windows 8.1 and in a moment of weakness, I succumbed (got sick of the nagging).

  Since that time, my wifi is very intermittent; either I'm on another computer write this and the laptop is essentially not connected to the internet.

  For some reason any (although I didn't try it before), I can not connect via ethernet either, so I think it's probably the driver problems. (I also tried to connect the public wifi but fails).

  I tried to install the driver WiFi Toshiba 8.1 but that has not solved the problem.
  Then I noticed that I'm supposed to install a bunch of drivers in the order.

  Maximum setting to do it, but the first package (associated with bluetooth) said I have to remove the current driver... I try by "turning off", then "Uninstall" but 8.1 seems to re - install automatically and I don't know how to disable this option (I can try to delete the driver file, I guess, but I'm sure 8.1 covered too and will probably launch a drone to try me out ", if I do). *

  Any kind soul there suggestions on a way forward? Pls.

  I see in the instructions of Toshiba Windows Update 8.1 should I have uninstalled the drivers before the update, but there is not much I can do about it now. :(

  Hello

  > I don't see in the instructions of Toshiba Windows Update 8.1 should I have uninstalled the drivers before the update, but there is not much I can do about it now
  All your problems with the Windows 8.1 update related to the fact that you have not upgraded the Windows 8.1 system as recommended by Toshiba.

  Details:
  http://www.Toshiba.EU/innovation/generic/windows8_1-message/

  Solution?
  Back to Windows 8 (reset the system back to factory settings)
  Then, install all updates and patches for Windows 8 and follow along with the upgrade of system as described on the Toshiba Windows 8.1 upgrade page

  On the page of the Toshiba UE driver, you will find all the instruments that must be installed in the correct order and Windows 8.1 driver!

• Satellite Pro L300 - problem for Installation of Windows XP SP2

  I bought a Toshiba Satellite Pro L300-164 without BONES. When I tired to a software install Windows XP Professional genuine, it gives a message "Setup did not find units of hard disk installed in your computer".

  Repeated trial gives the same message. BIOS showing the hard drive. Can someone help me to set up Windows XP?
  Thanks in advance
  Hari

  Hello

  Start-up of facilities you have to load the SATA driver. I think that your laptop has a Chipset Mobile Intel® GL960 Express with code CrestlineGM + ICH8-M name.

  When WXP facilities charge ICH8 SATA driver. You can find it under http://support1.toshiba-tro.de/tedd-files2/0/stormng-20070827133046.zip

  Please visit http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=35787&tstart=0
  There is an interesting discussion about the installation of Windows XP Sp2 home edition.

• Satellite A350-20s - advice and appropriate OS - Windows 7

  Hi all...

  I have ordered an A350-20s, (4gig RAM, T6400) and want to remove Vista to replace with Windows 7 but have some questions.

  1, should I go for 32-bit or 64-bit?
  2 if I go for 64-bit, that I need to update the BIOS?
  3, I had a quick glance at the download page, I was wondering if the drivers and BIOS for Vista will be allowed to use for Windows 7?

  Please contact your opinions.

  Thanks in advance.

  # I put t know for who would you use your laptop, but in my opinion, you must use 32-bit. Most offered are requested for 32 bit OS
  # as far as I know, you do not
  # many people here talked about well work under Win7 Vista drivers, but your laptop is / will be Win7 benefit so that it will be better to wait get und Win7 drivers

  Before you do anything, please start original preinstalled Vista create recovery DVDs using Toshiba Recovery creator pre-installed utility.

• Satellite A100-768 - problem of backlight after BIOS upgrade

  Hello

  I have a Toshiba Satellite A100-768 PSAA9 S10V600 bios update,
  I have no backlight on the screen apart and I have the original bios.

  Voila now I see the page but there are more backlighting, except at the beginning.

  http://www.YouTube.com/watch?v=XZJL-z3UFRU

  Help me please

  Hello

  As suggested above, contact the service center in your country. They will fix your laptop.

• Satellite A350-13 b - OpenGL and Radeon HD3650

  Hello

  My laptop is the Satellite A350-13 b with ATI Mobility Radeon HD3650.

  I found that I have OpenGL 1.1 (7/7) and partially 1.2 (1/8).

  I installed the latest drivers from ATI, modded with Mobility Modder site (also tried drivers from the Toshiba website - no results).

  I found that the modded drivers require OpenGL patch to make it work.

  Must be added:

  HKLM\Software\Microsoft\Windows NT\CurrentVersion\OpenGLDrivers\ati2dvag
  "Version" = "2" REG_DWORD %
  'DriverVersion' = '1' REG_DWORD %
  'Flags' = '1' REG_DWORD %
  "Dll"="atioglxx.dll" REG_SZ %

  But after he OpenGL Extensions Viewer see values (1.1 and 1.2).

  How is it possible to check the highest available version OpenGl and operate?

  I have a file called atioglxx.dll in Windows\System32 and registry entries mentioned above, but OpenGL Extensions Viewer says:

  Renderer: GDI generic
  Vendor: Microsoft Corporation
  Memory: 512 MB
  Version: 1.1.0
  Shading language version: N/A

  Texture size max: 1024 x 1024
  Max texture coordinates: 0
  Max vertex texture image capacity: 0
  Units of image texture max: 0
  Max geometry texture units: 0
  Value of filtering anisotropic max: 0
  Maximum number of light sources: 8
  Maximum window size: 16384 x 16384
  Components of top uniform max: 0
  Fragment components uniform max: 0
  Uniform components of geometry max: 0
  Max of the floats: 0
  Samples of max: 0
  Max draw buffers: 0

  Extensions: 3

  GL_EXT_bgra
  GL_EXT_paletted_texture
  GL_WIN_swap_hint

  Main features
  v1.1 (100% - 7/7)
  v1.2 (12% - 1/8)
  v1.3 (0% - 0/9)
  v1.4 (0% - 0/15)
  v1.5 (0% - 0/3)
  v2.0 (0% - 0/10)
  v2.1 (0% - 0/3)
  v3.0 (0% - 0/23)
  v3.1 (0% - 0/8)
  v3.2 (0% - 0/9)
  v3.3 (0% - 0/9)
  v4.0 (0% - 0/13)
  v4.1 (0% - 0/8)

  For the OpenGL driver version check (current: later known 1.1.0: 1.1.0):
  Latest version of found display drivers
  According to the database, you use the latest display drivers for your video card.

  No ICD registry entry
  The OpenGL driver does not expose the SOFTWARE/Microsoft/Windows (NT) / CurrentVersion/OpenGLDrivers registry entry. Could not detect the version of the driver, the revision of the driver name and the name.

  No support of the compiled vertex array
  This can lead to loss of performance in certain applications.

  No support of the singlepass
  This can lead to loss of performance in certain applications.

  No support for the secondary color
  Some applications can make not made salient polygon correctly.

  No support for S3TC compression
  This can lead to loss of performance in certain applications.

  No support from flange edge texture
  This feature adds control for edge clamping texel filtering. Some programs may not properly making the textures (black line border).

  No support for vertex program
  This function allows programming of vertex (equivalent to DX8 Vertex Shader). Some current or future OpenGL programs may require this functionality.

  No support fragment program
  This feature allows programmatically pixels (equivalent to DX9 Pixel Shader). Some current or future OpenGL programs may require this functionality.

  No OpenGL Shading Language support
  This can break compatibility for applications using by pixel shading.

  No support Frame buffer objects
  This can break compatibility for applications that use the rendering to texture functions.

  Some found texture units
  This can slow down some applications using fragment programs or extended texture mapping.

  Check the extension:
  GL_EXT_color_subtable could not be found, but has the entry point glColorSubTableEXT

  Thanks in advance for the help.

  PS: I'm from Poland, so keep in mind ;)

  Hello

  Nice ad, but what's the problem now? You publish many technical information that they are not useful, but what is your problem?

• ATI Catalyst Control Center 8 problem Windows

  Hello, I upgraded my ph Pavilion g series at windows 8. But now when I start it, I get the error message that ATI Catalyst Control center needs to be reinstalled. I tried a bunch of times but he returns (reinstalled, tried updates of the ATI site, nothing helps, he said: my driver is correct)

  And second, when I start it just sometimes gives a gray screen (and then I press the power button for 5 seconds to close). I think it might be related to my problem of graphics card. I'm a patient person, but I'm a little scared because I have a feeling I won't take long for my laptop to fi serious accident I have to keep doing this.

  Someone at - there of collaborative for these 2 problems I have?

  Thank you!

  Delabarre

  Hello

  Welcome to the Microsoft forums.

  You have installed the latest driver after uninstalling the driver?

  I suggest also refer to the suggestion from me from following link and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-Winapps/Catalyst-Control-Center-failure/de8882d9-c5f7-4916-A94F-7e52582f351b

  I hope this helps.

  Please post back with the State of the question and we will be happy to help you further.