Cannot connect Logictech Wireless Gamepad F710
I can't connect my laptop Logictech Wireless Gamepad F710. When I plug the USB of my laptop, Windows cannot recognize device and view who cannot install driver.
I use Windows 7 SP 1.
Please help me
Hello
(1) what is the number of brand and model of your laptop?
I suggest you to follow the steps below and check if it helps:
Method 1: Try to run the hardware troubleshooter and check what the problem is and fix it accordingly.
Follow the link below a convenience store opened.
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Method 2:
I suggest to return the item and try to run the troubleshooter and check if it helps.
Tips for solving common driver problems:
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
Method 3:
So I advise you to install the drivers Wireless Gamepad F710 below form and check if it helps.
http://www.Logitech.com/en-us/441/7361?softwareid=6298&OSID=14§ion=downloads
Hope this information is useful.
Tags: Windows
Similar Questions
-
original title: portable wireless problems
Hi guys, my laptop cannot connect to wireless internet. I tried to use ConfigFree Diagnostic tests already installed on my computer, reset the router, and even taking on the router for 30 seconds and put it to. On my laptop wireless switch is turned on, too. Is the only way I can connect to the internet via an ethernet cable and I started to disconnect from the wireless internet just yesterday. I know that my router is not the problem because I have a laptop connected to her brother. Also, I tried the FN + F8 key on my Toshiba laptop. Thank you in advance.
Hello
Is this also your thread with a different name?
====================================================================
To do a hard reset on the router and the modem, you must feed their STOP, wait 3 minutes,
then then turn on the modem on - when it comes back - router - when it is set to zero
computers.
----------------------------------------------Anyway the same answer applies: update WiFi driver that something has probably
He touched. Make sure that the wireless device is turned on, if there is a switch on the computer.
Many Toshiba have a WiFi switch on the front or side.Update the driver WiFi, use the wired (NIC) to download the driver or do it on another
system and your transfer on removable media such as CD, DVD or a USB key.Control Panel - device - network - WiFi note the brand manager and full
model information - double click - writing tab Drivers version - then power management tab uncheck "allow the computer to turn off this device...". »Then on the tab driver, click Update driver (this can do nothing as MS is far behind
drivers of certification) - then right click on the device - UNINSTALL - REBOOT - this will
update the driver stack.Go to system Maker and search for the WiFi Driver updated - download - SAVE - go to
where you put it - make a right click on it - RUN AS ADMIN - REBOOTThen go to the site of the manufacturer of the device and get even more recent (Realtek, Intel, or one that makes
the device) and try the install again.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html====================================================================
Check with Toshiba support, their drivers online (update or reinstall) and their forums.
Toshiba - Forums
http://laptopforums.Toshiba.com/Toshiba - Contacts
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contactToshiba - drivers - access your model
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=downloadToshiba - Support
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jspI hope this helps.
-
Satelite C50 - B cannot connect to wireless local area network
My brand new straight out of the box Satelite C50 - B cannot connect to my wireless network, when you are running Windows 8.1.
When you run the wizard for the first time user, it was unable to connect to my network to register. And I have been unable to connect after starting the OS, even if my thread was visible and the signal strength would be strong. I entered the security network key, but the message came back "unable to connect to this network.
However, when I started on a USB key to run Linux Mint 17.1, it took less than 5 seconds to connect to my wireless network. If the Toshiba hardware work properly, as also my wireless LAN.
If I plug in a network cable, same Windows connects to my network and Internet.
However, given that the C50 - B satellite comes with Windows 8.1 both of wireless capabilities, I was hoping someone here might be able to help me get a wireless connection in Windows.
It's really strange. I have S50 - B and WLAN works properly. I used my laptop connected to several different networks and everything was OK.
You can try to test with different wireless LANs?
Have you checked all the WLAN settings?
Try restarting your router.I mean if your laptop can detect WLAN, this means that the hardware is enabled and working properly. There must be a problem with the WLAN settings.
Also check the advanced power settings, and then set it to maximum power WLAN.
-
Satellite A505 - sees, but cannot connect to, Wireless Router Win7
I have a laptop Toshiba A505-S6980 running the 64 bit version of Windows 7.
It worked fine a few months previously, to connect wireless to my O2 2 wireless router (the notebook has a REALTEK RTL8191SE wireless card).
I also have a desktop running XP computer that I use to connect to the same router. While on the desktop, I noticed several weeks ago that the router has been implemented with no WPA and WEP security, so I decided to change the router to WPA. The desktop PC was fine with this, but the laptop complained and wouldn't connect, failure of authentication and just stating "unable to connect to xxxxx". At the time I assumed it just couldn't handle the WPA authentication for some reason any and decided that I would probably turn to WEP to a later date to make it work again. At some point, I remove a ' O2 Connection Manager ", which had been installed when I bought a 3G dongle O2, where he has confused the issue, but it made no difference. In the meantime, I tried to connect the laptop using a wired connection and worked well.
I now (a few weeks later) decided that I wanted to use the wireless laptop then redefine the router to WEP expect this to work, but it didn't. As with WPA, he did not get past authentication when I put the key to security in. So, I try to understand the problem...
What happens;
(1) the wireless laptop sees my router (and neighbors), but just cannot connect.
(2) I can connect with a laptop computer on the same USB wireless adapter.
(3) I can connect the laptop to the router using a wired connection, and there is no problem.
(4) my desktop running XP computer can connect to the router as WEP or WPA Wireless if the router is ok.
(5) this worked several weeks ago!
What I've tried;
(1) I have installed the latest REALTEK RTK8191SE driver.
(2) I tried to disable the security on the router, no joy.
(3) I deleted all the profiles of network on the laptop.
(4) I have tried with Norton antivirus and firewall disabled (but have not uninstalled) but no help.
(5) I tried to do a restore of the system to the closest possible point and no help.
(5) I uninstalled the wireless network adapter and its driver in Device Manager... Windows 7 can see the of it after a reboot and re - installed (using the old default driver), but it does not work. Then, I re-installed the latest version from REALTEK to ensure that it is up-to-date.
What's weird is that
(1) it works ok using the wireless USB adapter
(2) the integrated REALTEK wireless adapter works to a point such that it can SEE my router, connect simply do not
(3) authentication failure almost instantly
My suspicions are that an automatic update of Windows 7 or the O2 Connection Manager has somehow screwed it upward. I have uninstalled the O2 connection manager and tried to uninstall the automatic updates but there are many of them and I don't know how far back, I need to go. Also, because it authentication immediately, it seems that it is not giving him a chance to actually work.
Does anyone have any ideas on how I can proceed or had a similar problem?
This is a really silly situation. In any case, I recommend you to use the Toshiba WLAN drivers only.
I put t know what Realtek module is inside but try please install driver WLAN http://aps2.toshiba-tro.de/wlan/?page=downloadsAll that you have done is logic and I think I will try the same thing.
Have you tried to connect to WEP or WPA is disabled? I mean free WLAN without protection.
Have you tried to connect your laptop to a friend's router?I really put t know what is the problem here but there are a few bad setting it.
-
Satellite M30-154 cannot connect to wireless internet (wifi)
Hello
I did a recovery of product on my m30 - 154 a couple of days, and now it doesn't connect to the internet wireless, we have in our House. He sees the SSID, but it just connect, I have already made an update of the BIOS and an Intel update and I don't know what to do now. Can someone help me?
see you soon
> he sees the SSID, but it is enough to connect
The SSID is secure. Right?
Can you connect to open Wlan? -
Cannot connect my wireless 3054
I use a Windows 7 laptop, wireless to router DLink DI-524 and we tried tirelessly to connect my printer HP 3054 I just had, him. I ran the download of "connection doctor", warm reboot both the router, modem and printer, then restart the computer. It allows to print via a usb connection and when I printed the report to the printer, it said that everything is connected and "passed" the tests.
Any help would certainly be appreciated.
Hey there
Thanks for getting back to me, I some ideas more.
- Perform a clean - boot (how to perform a clean boot) and restart the PC
- Make sure that your firewall is disabled (Disabling and Re-enabling your software firewall in Windows)
- Restore the default printer and run again through the wireless setup and take note of the IP address of printers
- On your computer, click on start and type CMD in the search box (right click and open as administrator), when the command prompt box appears, type 'ping then the printers, example 192.168.x.x IP address' and press enter
- Save a screenshot of ping and post results please get back to me
Thank you
-
Suddenly cannot connect to wireless internet
All of a sudden, my laptop does not connect to the internet. I did nothing different and same fact a system restore from a month ago, but nothing has changed. Use the Atheros AR 5005 G wireless network adapter. Recently moved to Cleveland, OH, Houston, TX, and given that the move will not connect. I tried to configure using the Wireless Zero Configuration (WZC) in accordance with article 871122, but it still doesn't work. Help, please!
(1) make sure that u run "NET START WZCSVC" on the command-line as soon as u Ouvrezunesession WINDOWS XP (START, RUN, NET START WZCSVC (command line)).
(2) START, CONNECT, WIRELESS INTERNET CONNECTION
--> under the 'GÉNÉRAL' tab: (1) right click on the wireless Internet connection; (2) click on properties; (3) make sure that all THE ELEMENTS under the title "THIS CONNECTION USES THE FOLLOWING ITEMS" are COMPLETELY FUNCTIONAL, i.e. UNCHECK THE ONES THAT DO ARE NOT ACTIVE ~! (I recently turned off AVG and that this item has been inadvertently clicked on ~!) ;
--> on the 'ADVANCED' tab: run the NETWORK CONFIGURATION WIZARD to reset your network
3) http://support.microsoft.com/kb/871122 --> RUN 'DIFFICULTY CE PROBLEM' (ms - fix 50469)
-
Cannot connect Router wireless and wireless for windows printer
I can connect to a wired router and print. But can't do wireless?
I can connect to a wired router and print. But can't do wireless?
Given what you have... Yes - no idea.
If your Windows Vista-based computer has a network inside wireless device and it has the correct driver and software installed and that you have configured the router (if you know the settings) then sees the network wireless on the Windows Vista machine and can configure to match how you have configured the router - there is no reason that you should not be able to connect to the site because you are in-Beach/without any noise between yourself and the router other than equipment of poor quality or poor quality software.
-
Intel noted some problems with the Intel(r) Active Management Technology-SOL, but also their Intel (R) Management Engine Interface. I checked with the help pages to download Lenovo and downloaded what I could but still an unable to establish a wireless connection. T400 Thinkpad Lenovo. Thank you guys
Hello
It seems that there is a known problem with Wi - Fi in T440 ThinkPads. Follow the steps in the article mentioned below and check if this solves the problem.
Troubleshooting Wireless - ThinkPad problems
http://www-307.IBM.com/PC/support/site.WSS/MIGR-50402.htmlIf the problem persists, then contactLenovo's Support for assistance.
Kind regards
Afzal Taher - Microsoft technical support.
Visit our Microsoft answers Feedback Forum and tell us what you think. -
Publisher cannot connect printer wireless Officejet 6500 has E710e and the laptop over the network
I just changed my ISP and moved to British Telecom, who sent me a new router. The new service is in place and working well and I reconnected my Officejet 6500 a E710e CN557A to the wireless network. But I can't connect the printer to my laptop no matter what I try. I have uninstalled and reinstalled the printer on the laptop using the original CD and then updated to the latest drivers. I even reset the printer to default and then network related setting before attempting to connect the portable computer whose IP address of the printer without success. My laptop OS is Windows 7 32 bit and the printer is just over a year. He worked like a dream with the old wireless network.
I have already downloaded on my laptop HP - HP Print and Scan Doctor diagnostic tools and troubleshooting network printer connection. Printing and scanning doctor can't see the printer and I followed the instructions of troubleshooting without success.
Any help and advice would be much appreciated.
If it is a BT Home Hub, they don't play well with HP wireless printers.
You can try this - remove all instances of your printer in Control Panel > devices & Printers. Then:
1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing. Get his IP address for a network Test printed on the front of the printer.
2. click on > start > Control Panel > devices & Printers.
3. click on add a printer
4. Select local printer
5. Select create a new port and select Standard TCP/IP Port, and click Next.
6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
8. If prompted, use the driver that is currently installed.
9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
10. we may ask you to share the printer. Choose No.
11. the printing area of Test Page is displayed. Go ahead and print it out.
12. click on finish. -
Cannot connect new wireless J4680 to Airport Extreme 802.11n
1. I first tried hold as usual several times. The installation wizard is not 'see' my wireless. Tried to reset wireless from the camera, without result.
2 follow the steps as shown in the video 'YouTube' of HP. Was once able to proceed to the point to get at least a "Page of Network Configuration" report printed which indicates success in adjustment in "ad hoc" on its network "hpsetup" mode, but then can not pass the airport network in infrastructure mode, input on the webpage of embedded devices. (But now I know at least IP address theJ4680.)
3. usually not found "hpsetup" automatically listed as a network on the airport. Can sometimes become there by configuring manually via the J4680. But this method will not always work.
4. based on a different view (a person using Windows, Fios), tried to temp - disable my security at airports (a WPA2 Personal), but who have no positive effect.
5 J4680. Airport Extreme 802.11. Mac OS 10.5.6. No firewall that might interfere. My MacBook is the only device on my Airport network.
What else should I try? Thanks in advance for any other tips/techniques that y ' All can provide.
It works! It works! It works!
Basically, I had to wait for the weekend to go home, so when I did, decided to just approach it all completely 'clean ':
1. uninstalled the J4680 driver-->
2 do you have a factory reset on the Airport Express-->
3. configured reset Airport Express-->
4 reinstalled the J4680 driver, using one that I had downloaded earlier (instead of the Conference on Disarmament) to make sure that I got the version the most recent-->
5 turned on/turned off everything (to reset): MacBook, modem, router, printer-->
6. then simply followed the implementation of HP guests-->
It works! It works! It works!
Thanks for your help and to hang in there, Jim. (... A little anticlimatic.)
Mark
-
Bluetooth cannot connect to wireless (MW600) headhones/microphone
I have a Sony Ericsson Bluetooth headset MW600 I want to use with my ThinkPad Yoga.
However, Yoga can not find them. He can find other Bluetooth devices (although they appear as 'not connected') and the helmet can be found by other devices.
What can I do?
20c003smd
FYI: The problem is that I did not erase the previous pairings in the MW600 - it wasn't a question of Yoga but a user :-)
-
Scanner - cannot connect a wireless printer
In the past always printed my Epson XP-400 and currently can even print information from the software, but cannot print photos that I scanned. Receives the error message "Cannot print because printer supported by this software is not installed." And when I look at it does no printers appear in the print section in my garden not picture more. Recently had a new power supply installed could he have screwed something? I need to reload the software, and if so are there precautions. Thank you.
Hello lolarowe,
Welcome to the Forums of Canon and thanks for your inquiry! Canon doesn't make this printer model, so we would not be able to help with this issue. You can consult the site Web of Epson at http://www.epson.com for assistance.
Thank you and have a great day!
-
Cannot connect to Windows 8 wireless.
I just got a new computer with Windows 8 and cannot connect my wireless Officejet 6500 JP. If I attach to the computer with a USB port, it works but not wireless.
Hi Rharring,
Check if you can connect with the EWS printers, and if you see information the printer go ahead and run the Setup program to reinstall the printer. When you get to the connection type screen, select wireless or network, and then follow the instructions on the screen to complete the installation.
-
Unable to connect via wireless
Hello
I use a HP Pro book Windows7 professional. All systems were functioning well when the wireless connection has been disconnected.Later my laptop cannot connect via wireless even if system the wireless still work correctly on my ipad.Please tell us what I should try to fix this problem.You have run the wireless troubleshooting tool? - http://windows.microsoft.com/en-US/windows7/Using-the-Network-troubleshooter-in-Windows-7
Is your wireless network of the specified interface as active or disabled, if disabled then re-enable-control panel, network and sharing Center, change the settings of the map, right click on your device to turn on or off (you will be asked for admin at some point).
PS - extra thought, some laptops have a wireless switch network. It is not struck off there?
Maybe you are looking for
-
El Capitan guard begin installation after completing a
Hi all More than a month my kingston ssd drive is dead. I ' v ebought a new recently. For the last two days, I try to install El Capitan without a bit of luck. the procedure looks likw this: I plug my USB bootable, and at the start I click on the opt
-
Need FN and multimedia driver for Windows XP
Hello I love this laptop!I need driver for the FN and the MULTIMEDIA keys (brightness, red led and so on). Please help me.
-
Is it worth to replace a macbook pro with an old mac pro?
I have a 13 "macbook pro mid 2012, core i5 2.5 ghz and 4 GB of RAM I plan to replace an old mac pro with intel xeon 3 GHz dual core or quad (maybe from 2009 or 2010) and slowly upgrade by adding more RAM, sound card, and video, etc. (I won't change t
-
OfficeJet 7500: HP L7500 Scanner not recognized after last update Win 10
I have this same problem on all my PC from the most recent Win 10 update 3 March 2016. All the pc to connect to the printer via a wireless connection with the printer connected to the router using one if the router is NIC ports. Just to be clear, I
-
Keyboard wireless Comfort Desktop 5000 from Microsoft 104Key
anyone having problems with the keyboard and mouse jump does not work