Cannot connect using wireless after Windows7 clean load. Computer recognizes the router but have tried several ways to connect but not joyl

Similar Questions

• Laptop HP G70 connection to the router but not the internet

  I have a laptop HP G70 running windows 7, I got a new router installed. My computer to the router, but not to the internet links. I tried the software updates for my drivers running, doing all used to end router for example change etc channel/parameters/IP wifi. I tried to turn off the wireless, reset the router and re enabling it does not work.

  It will connect to the internet ethernet of nis.

  My laptop connects fine with other networks if it is not wireless.

  All other devices are connected to the router.

  Please help this is extremely frustrating.

  You are the very welcome.

  I compressed the file and downloaded on my Skydrive account, which I shared the link below.

  Download, unzip and run the file called sp54972.

  https://onedrive.live.com/redir?RESID=832F4957D2E51B93! 263 & authkey =! AEOhdjA3QVhETy0 & ithint = % 2czip

• HP 4500 g510n-z-printer connected to the router but not responding do not

  Hello

  I got this printer (HP4500 G510n-z) for 3 years. This worked without any problem until I changed my router and installed a nas on the LAN Server.

  Now the printer is connected via WIFI to router and is perfectly installed on computers connected to the router. But it does not work. I used HP Print-Scan doctor and he finds the device, but it was not connected. I tried to connect to the printer IP of all computers, but I have not received any response (using ping, it doesn't have 75% of the package). On the router configuration page, the printer is connected to the usual IP and on connected computers the TCP - IP is configured correctly.

  I have tried everything and I managed only to reboot the router. But it did not last, each computer remains connected only until you restart the PC nex.

  Sorry if I'm not too clear, please don't exitate ask for more details. Thanks for your help!

  Replacement of your wireless router try now.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• Wusb300n connects to the router, but not to the Internet

  Recently I have formatted my hard drive and reinstalled Windows XP Home Edition. Initially, wireless has functioned well. Now he works briefly then stops. The router works fine (another I have it right now). The strange thing is that the utility monitor wireless network which is installed with the drivers for the USB wireless network card says that I'm connected to the network, shows the correct information, and shows even the networks belonging to the neighbors. Everything looks OK. But there is no connection to the Internet and I can't share files with my other computer. What is going on?!

  Another detail: it works for a while at first, allowing me to connect to the other computer on the network and browse the Web, but then it stops without any indication that something is wrong.

  Help!

  Here is how I solved this problem. I found using the Troubleshoot utility of connection IE 8.0 security protocol used by my wireless router was different from the one I had chosen when I set up the connection (WPA or WEP or somesuch) wireless network. By matching them up, I avoided having then off the connection behavior.

  In addition, it cannot help I installed the wireless card until I installed the drivers of general network for the computer. By removing the two and their resettlement in the proper order (second wireless card) I think I contributed something to address the issue.

• connected to the router but not on internet

  Hi guys... First sorry for my English. Since Sunday that I'm not being able to go on the internet, and I don't know what happened, dor I have nothing.

  I get the correct configuration IP form the router, I've seen with other portable router to register my PC connected, but nothing impossible to navigate. I tried also with static IP address.

  I try a lot of time, disistalled and reinstalled NIC Driver restard PC, router, reset the TCP/IP stack. I am not able to also connect to the router configuration page. If I try to go to 192.168.1.1 a reception "site online, but is not responding...". »

  If I Ping 192.168.1.1 I have recevive request timeout, if I try it with another PC works and go quickly online reaaly. But i have installed in my PC with Virtual BOX, a virtual machine with windows XP and I go online, I can connect to 192.168.1.1.

  I've also tried sfc/scannow, but nothing...

  What happened?... and what I can do?...

  GIO tanks

  You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and it seems to be the cause of this problem for most, if not all, users.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

  I got McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee you don't follow their procedure of fix would have upgraded my PC at risk by not updated and, like other McAfee ads have since explained, the application did not refer to its database of threats correctly [and this could explain part of the variability of the symptoms of failure but all involved loss of internet connection]. Actually, I removed McAfee then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].

  - - - - - - - - - - - - -

  If you do not have McAfee then Windows update than kb2705219 can also be a cause as the uninstall that appeared to solve the problem for some users [but I'm not particularly convinced by this]. To uninstall an update - control panel, programs & features, [left side of the window] see installed updates. Wait until the system has finished the research for the list of updates. Select update required, then right click and Uninstall.

• The ATT Uverse technician had to install a new router it reconfigured my laptops and desktop, now they work. I have a wireless HP printer, it will print from the desktop, but not the laptop, the message indicates the printer offline. Help!

  I need to know how to re acrivare my prinrer wireless, itr says he is offline

  If the printer is accessible and works and that your computer can reach it via the network, then most likely the printer has been set to ' offline '.

  This can happen when you try to print to the printer when it is not reachable and it accumulates mainly of your printing until it is put online, or it can be done manually by changing the mode.

  To change the mode back to "online" you will need to open your printers folder and right click on your printer and select "use printer online".  You can also check your printer settings and make sure that the printer you want to use is the default printer (the default printer can also be defined by double-clicking the printer icon and choose "Set as default printer").

• Just bought Photo Shop 13 elements of staples, I tried to get S/N, using the redemption code. have tried several times by ensuring that link correctly. exchanged with Staples for another product. still having the same problem. Staples said it may take

  can someone help

  Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

  - and https://forums.adobe.com/thread/1572504

  or

  Serial number and activation support chat (non - CC) can help

  http://helpx.Adobe.com/x-productkb/global/Service1.html

• Wireless cause: the network connection from the laptop to the router, but internet access comes and goes through procedures to 'fix '.

  The Dell laptop I bought is little used, not refurbished a downsizing Corporation.  I bought a refurbished by Cisco, Cisco Linksys router.  I can't stay on the internet for any period of time.  At the time that I open the browser, after the wireless connection, it goes your 'connected' to 'no internet access.  If I go through the diagnosis and fix it, it says I'm connected, but 'no Internet' returns quickly.  It shows a diagram of the connectivity of the laptop to the router but not to the internet router.  I had a second router refurb sent, and it does the same thing.

  This is all new to me (wireless and mobile), so my words my being turned off, but I wonder if it might be the wireless card, or network card (or is it just a different name for the router).  I mean, it's something in the laptop.  If I plug the DSL directly into the laptop, I have a perfect internet connection, so I did not thing is my provider.

  Any help/suggestions appreciated!

  My issue was with the ATT modem not set to fill mode.  modem was not accept what he said was the router.

• Samsung S6 connects to the router but no internet

  When I switched to xfinity I bought a C6300. I had problems with the first not allowing my NAS to connect so I exchanged against another. My phone would connect to the router and work fine for awhile then lose Internet connectivity. The only way to get it back is to reboot the router. I tried several different units, and I am now on a C3700. The problem still exists and seems to be deteriorating. All of the suggestions.

  I solved my problem by replacing the Netgear with a Zoom. It was the only one that I could find who said it would work with Android. I hope that Netgear will get things straightened.

• Try to connect to the wireless computer after freshly installed Windows says I am connected to the router, but I have no internet access

  Original title: connection problem

  Hello! I recently did a clean installation of Windows 7 Professional 64 bit and I use a wireless USB adapter. Windows says I am connected to the router, but I have no internet access, and I have this yellow on trinagle. Work of all my other Windows 7 PCs, but this one. Could someone help me? Thank you!

  Hello

  Welcome to the community forums of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue. I see that you are unable to connect to the wireless network after you perform a new installation.

  I suggest you to consult the steps described in the article:

  Method 1:

  You can try the steps in the link and check.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  You can update the driver of windows 7 on the manufacturer's Web site.

  Method 2:

  
  You can remove and re-create the wireless network connection, follow these steps:

  a. Click Start, type ncpa.cpl , and then press on Enter.
  b. right click on your wireless network connection and then click Properties.
  c. click the wireless networks tab.
  d. under preferred networks, click your Wireless
  network and then click on remove. e. click on view Wireless networks.
  f. under management of the network, click refresh the network list.
  g. under Choose a wireless network, click the wireless network to which you want to connect, and then click Connect.
  
  Method 3:
   
  
  If the steps above don't you can uninstall and reinstall the NIC drivers and check with the question.

  a. click on Start menu, in the Search tab type devmgmt.msc and press ENTER.

  b. right click on network adapters and click Uninstall and restart the computer.

  c. after rebooting, install network cards and check with the question.

  
  Method 4:
  
  You can temporarily disable the antivirus and firewall on the computer and see if it helps:
  Enable or disable Windows Firewall
  
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  NOTE: Turn off Windows Firewall might make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
  You can see the following link to disable the Antivirus installed on your computer software.
   
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  Please follow these recommended steps and post if you still experience the problem. I'd be happy to help you further.

• I have a Wireless N card and the router, but only to connect to wireless-G speeds

  I just got a new HP DV7T with a N (with bluetooth) wireless card: Intel Centrino Advanced - N 6200 AGN

  I use a Netgear wireless router (WNDR3700) double radio.

  My wife's cell phone can connect to the router with a N Wireless card at a speed of 170 Mbps.

  My laptop can connect only to 54 Mbps. I checked that I am connected to radio N of my router (the radio of G/B/A has a separate connection).

  I found a useful post here:

  http://h30434.www3.HP.com/T5/wireless-Internet-and-home/wireless-does-not-seem-to-connect-at-802-11n...

  I followed the advice of responses and checked all the settings of the router (but the success of my wife to connect at speeds N essentially rules on the router) and checked the settings of the adapter to make sure it helped N.

  I wonder what it is that I'm missing. Any suggestions would be greatly appreciated.

  Thank you.

  I was able to determine the problem after extensive web searches.

  I was using the WPA-TKIP authentication which, in some cases, prevents the speed N Wireless.

  Once I changed WPA2-AES authentication radio N I got immediately 300Mps speeds and it varies between 240-300Mbps now.

  I hope this will help others with the same question!

• Satellite L455-S5045 laptop Realtek8187B wireless 802. 11b / g connects to a d-link router, but not internet access.

  PC laptop Toshiba Satellite L455-S5045, Realtek8187B wireless 802. 11b / g connects to a d-link router, but not internet access. go to google.com and States page cannot be displayed, I ran diagnostics and reports, everything is configured properly. the wireless signal that d-Link has is 802.11n with a WiFi Code and running XP, I have WIN 7. Do I need to driver 802.11n, if I do, why I can not download it

  Hello

  To help you better, please answer these questions.

  1. don't you say no Internet access in the notification bar?

  2. what diagnosis you have to run?

  3 did you do changes on the computer before the show?

  To solve your problem, try the provided items.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  You can check the link:

  Troubleshooting Wizard

  Reference (my computer can not connect to Internet)

  http://support.Toshiba.com/support/troubleshootSelfService?PRDTYPE=computers

  If you need help with the Windows operating system, just tell me and we will be happy to help you.

• Must the updates and hot fixs remain on the hard drive after having been loaded? Is the information provided in the operating system?

  Must the updates and hot fixs remain on the hard drive after having been loaded?  Is the information provided in the operating system? Or do the lonely stand.

  Original title: need for disk space

  Here are the official specifications of Toshiba for your PC...

  http://support.Toshiba.com/support/staticContentDetail?ContentId=638405&isFromTOCLink=false

  All interface PATA (IDE) connectors are a standard 40 pin.

  I know that there is no restriction on the mixture of ATA drives with different speed capabilities and no restrictions on what cable you use, whether 40 wire or 80 strand (but still 40 pins).

  Faster drives will only work at the speed of the slowest car on any cable and 80 strand cables are needed to make ATA66 or higher drives run at their native speed.

  In addition, no player can work faster than the motherboard chipset permits, in your case ATA66.

  My provider of trade has still some disks 3.5 '' PATA in stock, but these are becoming harder and harder to find. Indeed, it is possible that production has ceased and that suppliers are just exhausted stocks.

  I can certainly say that, when repairs this technology were more frequent, I never had problems with discs theoretically faster on the same cable as slower drives, nor by using faster on 40 cable strands discs. In fact, of many penny pinching manufacturers (some of them major) regularly used for the optical drive and hard drive on the same cable as the motherboard has two connectors, resulting in a decrease in performance on the disk hard (although most of the people would not have noticed the difference). Sometimes, the cable would be 40 strand (understandable if you are penny pinching) and sometimes the cable would be 80 strand (laughable if you are penny pinching because they are [were] more expensive).

  Pass your question about vacant below the sound card. Unless your text confused me, this space is for expansion cards no disk drives. Space that you reference is probably to the back of the PC. Hard drives are normally located toward the front of the dedicated PC "berries". Unfortunately, I could find no photo on the Toshiba site, and still less those internal.

  Tricky

• Windows 7 reactivation error "the product key you entered cannot be used to activate Windows on this computer."

  Original title: the reactivation of Windows 7.

  I had uninstalled my Windows 7, or more to the point, to the format that cause hard drive then I bought a copy of Windows 7 Professional 64-bit and tried to install it on my new hard drive 2 TB, but it is around. But now four to five months and this disc hard seems to have failed, the installation going crazy and ends by not completely. So now I use 8 64-bit Windows, on the hard drive that's used to have my old Windows 7 32-bit, and I try to install Windows 7 32 bit on my VMware Player as a virtual PC, but for some reason any bloody, the thing won't turn on. I got my license and my old Tower, the old tower and the old series of hardware Linux now without all the graphics cards, but it is going to be really just a supermodel, a server for a game and accommodation of the tracks that can be downloaded in the game, all she needs a new motherboard cheap as the motherboard, that he completely fried. But the issue I'm having is with virtual PC, however, I use the license that came when I bought it and is not wanting to turn on, it keeps Gush a BS error, my Windows XP is activated, but my Windows 7 does not. He always tells me that "the product key you entered cannot be used to activate Windows on this computer."

  How and why? I'm in my series that accompanies it, and that's exactly as it appears on the label. What I am doing wrong?

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  If your license of Windows 7 is an upgrade:

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  --------------

• Can connect to the wireless router, but not to the Internet

  Because I could not find this post, I published in my problem to

  Windows 7, connecting Local only, no Internet

  I think I described the problem a bit better here.

  I had a Gateway DX4300-17 with Windows 7 Home Premium for about six weeks. I connect to the Internet via a Netgear wireless router. My Internet connection dropped often, but I've always been able to reconnect to the Saturday. Since the start-up my computer Sunday, when I try to connect to the Internet, the system tells me that I am connected to the router, but there is no connection between the router and the Internet. I did a system restore to Friday, but it did not help. I searched the Knowledge Base and tried several things I found there. Running "sfc/scannow" indicates that all is well. I disabled the '6' Protocol (I don't remember the letters that were with this, but you probably know what I mean). This made no difference either. I thought I would ask for help here in the hopes of not having to restart the computer to the "hospital". That's a very different problem here barely a week. I need help, please.

  Hello Bill6009,

  Have you tried to boot your computer in SafeMode w/network to see if the problem persists?

  If so, try to perform a clean boot to see if you encounter the same problem.

  Please post back your results if we can help get your problem solved J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think