Unable to connect via wireless

Similar Questions

• Unable to connect via wireless with SSID broadcast disabled

  I want to configure my router for my SSID is not broadcast, because I think it's a logical step to take for increased security. I have not been able to do since I started using my new laptop Inspiron 5558. I tried this several times and every time I turn off the SSID broadcast, I am not able to connect to the Wi - Fi on this laptop. Other remote computers in my house and my smartphone connect without problem, but nothing I've tried helps my new computer Dell laptop to connect via Wi - Fi, except for allowing the SSID broadcast.

  I have a router Actiontec MI424WR reverend E. I have installed the new driver and the Intel PROset utility and unfortunately nothing has changed. I went to the settings to investigate some of the other solutions offers, and I came across something that seems to have solved my problem. What I found in SETTINGS/network & Internet/change adapter options/Wi-Fi/see the status of my properties of connection/Wireless / on the connection tab, it was an uncontrolled area with the words "connect even if the network is not broadcasting its name (SSID). I checked this box, and since then, I was able to connect to my network wireless with SSID broadcast disabled. I will now call this resolved and if no new problems arise. start a new post. Thanks for sticking with me on this.

  Ed J.

• Re: Satellite L300D - unable to connect via WiFi network

  Any help please? -I just L300D with Vista professional.
  Crossed troubleshooting but still unable to connect via the wireless network - no probs with other laptops.

  When going through "Toshiba assist" message arrives "this wireless network device is disabled.

  Please activate the device"- button wireless is activated with light yellow?

  any ideas?

  Are you sure that the laptop wireless switch is on?
  Look in the Device Manager. Maybe it's the wireless network card disabled. So activate it.

  Also try an update of the WLAN driver. You can find it on the Toshiba site:
  http://forums.computers.Toshiba-Europe.com

• Satellite L350 - unable to connect via a WLAN

  Hello
  New to this lark of thread

  You just bought a L350
  I have managed to connect to the Internet via a cable, but am unable to connect via wifi.
  WiFi is turned on. He finds my BT Home Hub but when I connect, it just says: it's impossible.

  Help, please

  Have you checked the Wifi device in Device Manager? The driver is properly installed?

  Try turning off your firewall, which could block the Wifi connection.

  Also try to press Fn + F9 to toggle wireless devices

• Unable to connect to wireless networking

  My Toshiba laptop has been pre-installed with Windows 7 Home premium 64 - bit OS and it worked quite well with the BB wireless. However, the wireless internet was on and turned off in recent weeks, while other mobile devices, such as iphone, ipad, or laptop, in my household had no such problem. The wireless signal was so strong, but the error message always says "unable to connect to wireless networking. It seemed that there was something wrong with the wireless adapter.

  I got a new adapter properly installed TP-Link wireless. Fortunately, it worked; but unfortunately, it worked for less than 24 hours. It was really frustrating that I, like student full time, depended so much on the wireless network card.

  Help, please! Harry

  Hello

  You can enlighten us with:

  -What model do you use (eg..) L300-123)
  -What version of BIOS is installed?
  -WLAN driver do you use?

  All these questions are answered in PC Diagnostics are under Toshiba app folder in the start menu.

  BR

  Tom

• I'm unable to connect to wireless modem, the message's problem is the network cable is unplugged got new cable still

  network cable unplugged wiundows xp

  I'm unable to connect to wireless modem, the message's problem is the network cable is unplugged got new cable still

  Hello Verashanley

  Since how long did begin?
  You have added a new software or hardware to the system?
  If the issue took place recently then you can try the system restore.
  How to perform system restore in Windows XP.
  If you have recently added anything to the system (hardware or software), then remove.
  If the system restore does not then check in Device Manager and verify that the network card is considered and no errors appear.
  To open Device Manager, click Start, and then click Control Panel. Click performance and Maintenanceand then click System. In the hardware tab, click Device Manager.
  Check the type of network card you have and that you try to update the drivers from the hardware manufactures Web site.
  Also, check the connection for the network adapter. Do you see any physical damage. When you plug the NIC saw all the lights on the network card lights up? If not, then you can deal with a hardware problem and need to contact the manufacture of the system and see about obtaining the card replaced.
  Let me know the results. Thank you.

• I can connect to my wireless router, but cannot get internet connectivity via Wireless. If I connect the cable to the port on the router, I get internet connectivity.

  Wireless router / Internet problems

  I am running Windows Vista Home Edition with Security Essentials.  I can connect to my wireless router, but cannot get internet connectivity via Wireless.  If I connect the cable to the port on the router, I get internet connectivity.  Is there a firewall setting that could cause this problem?

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Internet Explorer message: "unable to connect via the parameter to wide band".

  When I try to connect to Internet Explorer, I get a message saying unable to connect via the parameter to broadband. We have AT & T Wi - Fi that I seem to be the only one of 4 people in our House, that has a connection problem. We all have different types of computers, some run Windows 7 and others are Vista. Don't no if this material. I preformed a few tests without results of troubleshooting. Help, please

  [Original title: programs network networking Internet site Internet website URL website network]

  Hello

  ·         What is the exact error message you get when connecting to internet?

  ·         Which is the browser you use to access the internet?

  ·         You are able to use other internet applications such as messenger etc?

  I suggest you follow the steps below:

  Method 1:

  Follow the steps in the link below to connect to the internet in the link below:

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Method 2:

  Follow the steps outlined in the article below if you can not connect to internet:

  http://support.Microsoft.com/kb/956196

  Method 3:

  If the steps above do not follow the steps in the link below for network connection problems in windows:

  http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows

  I hope this helps.

• Unable to connect via the wireless router "problem with wireless adapter or access point" _

  Hello

  I recently replaced my old Toshiba laptop with a new model of Toshiba Satellite L500/033HNX, it installed Windows 7.

  The problem is that I can't connect to my wireless network. I am currently connected via Ethernet cable to my Linksys router.

  I had help from my internet service provider, the installation correctly the problem not because of the connection.

  I had a Linksys online support, the router is a wireless, model - WAG54G ADSL gateway, is not the problem of all the correct settings and other devices can connect via my wireless network. I ran Dr. connectivity several times and it is always impossible to connect, "problem with the wireless adapter or access point.

  OK, you're my next hope to solve the problem can you HELP Please!

  Hi, JoelbX
  I want to thank very you much for your support and effort do to help me solve this problem, but we receive have been, and I don't want to waste any more of your valuable time, so I am the son of closing and deleting of Tring in Microsoft Answers.
  All the best
  Tring

• Unable to connect via radio - impossible to obtain network address

  All,

  I had to restore this laptop due to virus problems (my daughter system..).  I have put back it and it works except that I am unable to connect to the wireless network.  It says 'Acquiring Network Address' and goes then to the "Limited or no connectivity."

  Here are the details:

  System:

  Inspiron 1300 - XP Pro SP2

  Dell Wireless 1370 WLAN Mini-PCI Card

  Parameters:

  o use Windows to configure the verified wireless network

  o in Dell Wireless Utility, unchecked "let this tool manage your network."

  o WZC: start & automatic

  o TCP/IP: Obtain IP automatically and obtain DNS automatically

  I took action:

  o reloaded all drivers available for my service tag, including the pilot for

  the network card

  o went through all the Dell relevant troubleshooting steps

  o I have a different laptop that connects to the wireless network and I

  compared the parameters between the systems of work and non-working - they

  seem to be the same (another pc and card)

  o the 'bad' system can connect to the network via ethernet cable

  The status bar displays the network icon (pc screen) with yellow trinangle and!

  and 5 green bars for the network card has an excellent signal with unknown status.

  I'm not clear on the question of whether Windows or the utility of the card should be network management; I tried both to no avail.  I'm basically out of options to try and hoping someone can help me.

  Please let me know if there are any additional necessary information.

  Thank you in advance for your help!

  
  

• Unable to connect through wireless F4580: "unable to retrieve the IP.

  Hello

  I live in France, where the F4580 and trying to connect wireless.  The printer works fine when connected via USB, but I can't make it work wireless, HP installation wizard gives me:

  IP address: impossible to retrieve the IP

  Subnet mask: Impossible to retrieve the IP

  Default gateway: failed to retrieve the IP

  Preferred DNS server: unable to retrieve the IP

  Auxiliary DNS server: unable to retrieve the IP

  I use a MacBook Pro with Snow Leopard on an ISP Internet Orange Livebox. I saw some issues autour, but none exactly what I have with the same configuration.

  Filtering of Mac addresses: a possibility, but other laptops are able to connect to this wireless with key security without problem. similar here: http://h30434.www3.hp.com/t5/Printer-networking-and-wireless/Wireless-set-up-HP-F4580-vs-Orange-Live... but also seems to be PC

  Orange Livebox problem: question mentioned here: http://livebox.tomhallam.co.uk/tutorials/how-to-install-a-printer-to-your-livebox-liveprinter.html but that seems to be for a PC

  Question in Snow Leopard: is not compatible software for SL? I see this: http://h30434.www3.hp.com/t5/Printer-networking-and-wireless/C4780-Snow-Leopard-Airport/m-p/174198/h... but that's a different printer model

  Issues related to the:

  How to find the IP address of my printer?

  How to find the MAC address of my printer?

  How can I print my network Config page?

  Of the ideas there?  Any help is very appreciated.

  Many routers-wireless Orange Livebox require that press you a button to add a new device to the network.  The button is probably located at the back of the router.

  I think we should start over.  Try the installation process of the printer F4580 using the driver from www.hp.com located here.  Once it scans and detects the printer, press the Connect button on the back of the Livebox wireless router.

• Unable to connect via nfs, ftp only

  My network has two devices NAs - a NetGear ReadyNAS 102 (2x1To) and an OXFORD (NAs French device, 1x500GB). I'm trying to set up a weekly backup of critical files to the ReadyNAS to the GLOBAL system.

  On the OXFORD ring road, I activated CIFS, NFS and FTP. Using FTP, I am able to connect to the NAS without problems. However, I couldn't finish a single backup via FTP. The last attempt continued for 3 days and then failed. When I try to connect to the same part of the OXFORD box by using nfs, I get the error "unable to connect to the host.

  Are there steps I can perform to solve this problem?

  Thank you

  bsmerbeck wrote:

  I think that we could be closer to our cause of errors. I tried this command and received this error message:

  "showmount: failed to get address for.

  Maybe try this variant:

  showmount e 127.0.0.1

• Unable to connect via wifi Web after that windows update 8.1

  Laptop HP Pavilion 15 pc 15 n032sa-update to windows 8.1 but now unable to connect to Internet with wifi I have to use the yellow cable.

  Hello

  Please try

  (a) go into Device Manager and uninstall the network card (NIC) wireless.

  (b) restart the machine.

  (c) wait 10 mins.

  Or click on the following link and click Search now

  Kind regards.

• HP wireless printer (3545) showing only printer and scanner, connected via Wireless

  When I connect via USB, I see Print/Scan option in the settings system-> Printers & Scanners

  But when I connect through wireless, I only Print

  What is the problem?

  Even in the HP utilities, I don't see this option "Scan to Computer" when it is connected to the wireless printer

  Hi TahseenJamal,

  Thanks for the video, which has been most useful.

  I suspect that the router can be not broadcast the Hello Protocol as it did in the past. To resolve this problem, please follow the instructions below.

  1. Out of the router, unplug the power cable
  2. Out of the printer, unplug the power cable
  3. Stop the Mac
  4. Give up everything for 1 minute and then reconnect the router
  5. Once sighted routers are on, reconnect the printer to the
  6. When the wireless printer is solid, turn on the Mac
  7. Now try to add the printer that you had previously, you should now see the Hello or Hello printer multifunction beside him.

  If this does not resolve the problem, it could be the printer. Follow the steps below.

  On the front panel of the printer, the arrow down to settings, then press OK. Down arrow for wireless and press OK. In the wireless menu, go to IPV6 and turn it off. Once IPV6 is disabled, try to add the printer in the preferences system again.

  Please let me know if either of these solutions solve the problem and if one of them, please also let me know, thanks.

• HFG30 unable to connect via the Android app

  Nexus 7, HFG30 - all online and printed documentation confusing. Is not clearly the distinction between applications and the use of the web browser. Nowhere is the name of this app is mentioned. Had to go back with support to find the name.

  The name of the application's access to the camera more than, unfortunately, the Pixels.

  HFG30 not in the taken list supported here. Support says that it is supported. After all, no connection. Can connect via a browser however. Anyone else?

  Hi robbif!

  Thanks for posting.

  The application CameraAccess and CameraAccess Plus is not for all our camcorders.  Some newer models, like the G30 HF, are controlled using a web browser based remote connection, instead of using the application.  For more information about this, visit our help wireless page or view the distance travel brochure HERE.

  If it is a time sensitive matter, additional support options are available to contact us.