Satelite C50 - B cannot connect to wireless local area network

Similar Questions

• Satellite L300-10 q - imposible to connect to wireless local area network

  Bought a Satellite L-300-10 q and imposible to connect to the wireless LAN.

  A message appears when you try to install the WIFI network:

  "This WLAN device is disabled. Please activate the device. »

  What can I do? Tried everything.

  The message is clear to me;
  It is said that the Wlan adapter is not enabled.

  Activate the WLan WLan switch on the switch position. The LED must be on.
  Press FN + F8 key until the WiFi network will be chosen.

  This should help to enable the WLan feature

• Satellite Pro L40 PSL43E: Unable to connect to wireless local area network

  Hello to everyone who reads,

  I've had this laptop for about 12 months and a few days ago while trying to connect to the internet, she advised that I was not connected to my router.

  I have another laptop, it connects well with wireless and it connects fine using the ethernet cable but wireless!
  Especially, when I switch the radio power on/off using the small switch on the front the same symbol rises (the cell phone, red circle with a red slash through it, then the sign of the internet!)

  I tried the update of the driver for the Atheros AR5007EG Wireless Network wireless adapt and not much happened!

  I'm not in portable computers in a big way so any advise given better would become simple?
  I saw some stuff about the removal of the cards and other things? but I don't know where to start!

  Is it a common thing with these laptops?
  Need help please, I desperately need my laptop wireless.

  Thanks a lot to all in advance

  Paul

  Hello Paul

  Make sure that the wireless network adapter is correctly enabled.
  After putting using WLAN switch using FN + F8 key combination and make sure the wireless network adapter is enabled.

• I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center.

  Connection to the local network - properties dialog box

  Hi, I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center. But I can't access the Internet. My OS is Windows 7

  Hello Rajaneer,

  Is the computer that you are using a personal computer or a work computer?
  You will need to re - install your network card drivers like something was damaged and it prevents you to access the property:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• My laptop cannot connect to wireless internet. Ethernet works fine. Wireless is enabled on the laptop.

  original title: portable wireless problems

  Hi guys, my laptop cannot connect to wireless internet. I tried to use ConfigFree Diagnostic tests already installed on my computer, reset the router, and even taking on the router for 30 seconds and put it to. On my laptop wireless switch is turned on, too. Is the only way I can connect to the internet via an ethernet cable and I started to disconnect from the wireless internet just yesterday. I know that my router is not the problem because I have a laptop connected to her brother. Also, I tried the FN + F8 key on my Toshiba laptop. Thank you in advance.

  Hello

  Is this also your thread with a different name?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/wireless-Internet-on-laptop-not-working/aedbda38-a56e-E011-8dfc-68b599b31bf5

  ====================================================================

  To do a hard reset on the router and the modem, you must feed their STOP, wait 3 minutes,
  then then turn on the modem on - when it comes back - router - when it is set to zero
  computers.
  ----------------------------------------------

  Anyway the same answer applies: update WiFi driver that something has probably
  He touched. Make sure that the wireless device is turned on, if there is a switch on the computer.
  Many Toshiba have a WiFi switch on the front or side.

  Update the driver WiFi, use the wired (NIC) to download the driver or do it on another
  system and your transfer on removable media such as CD, DVD or a USB key.

  Control Panel - device - network - WiFi note the brand manager and full
  model information - double click - writing tab Drivers version - then power management tab uncheck "allow the computer to turn off this device...". »

  Then on the tab driver, click Update driver (this can do nothing as MS is far behind
  drivers of certification) - then right click on the device - UNINSTALL - REBOOT - this will
  update the driver stack.

  Go to system Maker and search for the WiFi Driver updated - download - SAVE - go to
  where you put it - make a right click on it - RUN AS ADMIN - REBOOT

  Then go to the site of the manufacturer of the device and get even more recent (Realtek, Intel, or one that makes
  the device) and try the install again.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ====================================================================

  Check with Toshiba support, their drivers online (update or reinstall) and their forums.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  I hope this helps.

• Cannot connect to the local file and print when the domain controller is not available because the network connection

  Hi all
  Having problems for local users, connection to a file and print server in one of my satellite offices.
  When my t1 connection is disrupted (problem of local carrier) my users when the connection is down to connect to the file room and print and always have access to their files and the local printer.
  The domain controller is off site in my main office.
  Environment:
  All local desktop clients are windows machines 7.
  Printing and local file is a windows 2003 server.
  DC is window 2008
  Note that we recently changed all 2003 to all domain controllers the PDC 2008, suspect that it may cause the problem, but just cannot know where it track.
  Any help or thoughts would be appreciated.
  Thank you

  Hello trj'hwma,

  Thank you for the question!

  It's discouraging to know that have problems you with the local file and print. As I understand well you cannot connect to the local file and print when the domain controller is not available because the network connection.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  Windows 7 IT Pro category

  Answer to us if you have problems with the local files and print or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• No links to the local area network connection. But how to use the Internet again, please help establish a LAN connection.

  Original title: no local network connection

  No links to the local area network connection. But how to use the Internet again, please help establish a LAN connection.

  Hi H.mustafaakyurek,

  ·         What operating system is installed on your computer?

  You can view the following items on the creation of a network connection:

  Setting up a network home

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

   

  Start here to set up a home network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/start-here-to-set-up-a-home-network-in-Windows-7

   

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Also see the following articles on the connection of an Internet connection:

  What do I need to connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/what-do-I-need-to-connect-to-the-Internet

   

  Allows to connect to the Internet mobile broadband

  http://Windows.Microsoft.com/en-us/Windows7/use-mobile-broadband-to-connect-to-the-Internet

  Hope this information helps.

• What happens if I uncheck all the properties of LAN (Local Area Network)?

  What happens if I uncheck all the properties of LAN (Local Area Network)? My machine OS is Windows XP Home Edition / 2002 Version / SP3 and I have a wireless connection. My connection to the LAN is disabled, currently, I don't have the desire to create a network, and I will in the future.

  Hi Bobby Collas,.

  There is no problem, when you turn off all the options in the properties of the local area network (LAN).

  You will not be able to connect to the Internet or use the connection to the Local network.

• How to allow access to a local area network behind the cisco vpn client

  Hi, my question is about how to allow access to a local area network behind the cisco vpn client

  With the help of:

  • Cisco 5500 Series Adaptive Security Appliance (ASA) that is running version 8.2 software
  • Cisco VPN Client version 5.0 software

  Cisco VPN client allows to inject a local routes in the routing table Cisco ASA?

  Thank you.

  Hi Vladimir,.

  Unfortunately this is not a supported feature if you connect through the VPN Client. With VPN Client, that the VPN Client can access the VPN Client LAN host/local machine, not host from the local network to business as customer VPN is not designed for access from the local company network, but to the local corporate network.

  If you want to access from your local business to your LAN network, you need to configure LAN-to-LAN tunnel.

• Satellite A505 - sees, but cannot connect to, Wireless Router Win7

  I have a laptop Toshiba A505-S6980 running the 64 bit version of Windows 7.

  It worked fine a few months previously, to connect wireless to my O2 2 wireless router (the notebook has a REALTEK RTL8191SE wireless card).

  I also have a desktop running XP computer that I use to connect to the same router. While on the desktop, I noticed several weeks ago that the router has been implemented with no WPA and WEP security, so I decided to change the router to WPA. The desktop PC was fine with this, but the laptop complained and wouldn't connect, failure of authentication and just stating "unable to connect to xxxxx". At the time I assumed it just couldn't handle the WPA authentication for some reason any and decided that I would probably turn to WEP to a later date to make it work again. At some point, I remove a ' O2 Connection Manager ", which had been installed when I bought a 3G dongle O2, where he has confused the issue, but it made no difference. In the meantime, I tried to connect the laptop using a wired connection and worked well.

  I now (a few weeks later) decided that I wanted to use the wireless laptop then redefine the router to WEP expect this to work, but it didn't. As with WPA, he did not get past authentication when I put the key to security in. So, I try to understand the problem...

  What happens;

  (1) the wireless laptop sees my router (and neighbors), but just cannot connect.

  (2) I can connect with a laptop computer on the same USB wireless adapter.

  (3) I can connect the laptop to the router using a wired connection, and there is no problem.

  (4) my desktop running XP computer can connect to the router as WEP or WPA Wireless if the router is ok.

  (5) this worked several weeks ago!

  What I've tried;

  (1) I have installed the latest REALTEK RTK8191SE driver.

  (2) I tried to disable the security on the router, no joy.

  (3) I deleted all the profiles of network on the laptop.

  (4) I have tried with Norton antivirus and firewall disabled (but have not uninstalled) but no help.

  (5) I tried to do a restore of the system to the closest possible point and no help.

  (5) I uninstalled the wireless network adapter and its driver in Device Manager... Windows 7 can see the of it after a reboot and re - installed (using the old default driver), but it does not work. Then, I re-installed the latest version from REALTEK to ensure that it is up-to-date.

  What's weird is that

  (1) it works ok using the wireless USB adapter

  (2) the integrated REALTEK wireless adapter works to a point such that it can SEE my router, connect simply do not

  (3) authentication failure almost instantly

  My suspicions are that an automatic update of Windows 7 or the O2 Connection Manager has somehow screwed it upward. I have uninstalled the O2 connection manager and tried to uninstall the automatic updates but there are many of them and I don't know how far back, I need to go. Also, because it authentication immediately, it seems that it is not giving him a chance to actually work.

  Does anyone have any ideas on how I can proceed or had a similar problem?

  This is a really silly situation. In any case, I recommend you to use the Toshiba WLAN drivers only.
  I put t know what Realtek module is inside but try please install driver WLAN http://aps2.toshiba-tro.de/wlan/?page=downloads

  All that you have done is logic and I think I will try the same thing.
  Have you tried to connect to WEP or WPA is disabled? I mean free WLAN without protection.
  Have you tried to connect your laptop to a friend's router?

  I really put t know what is the problem here but there are a few bad setting it.

• Post updated to SP3 and IE 8, some systems cannot connect to the local network

  A number of machines on my LAN that have recently been fixed to the last State (installed XP SP3, IE 8 and all dry and updated crit) seemed to lose all capacity for networking.

  Device Manager displays all problems, systems were released in market, on a a system restore was performed at a week back but the problem persists. They will not collect a DHCP, our work with a fixed IP address.

  They can only be connected with the local administrator account - domain accounts will not work

  The event log is giving nothing away - very curious!

  I'll try to include measures:

  1 netsh winsock reset (reboot)

  2 netsh int ip reset c:\resetlog.txt (reboot) http://support.microsoft.com/kb/299357/

  3 Uninstall SP3

  I would avoid if possible reconstruction so I welcme possible any other suggestions as to the cause or corrections

  Turned out to be a problem with the site switch - switch reboot solved the problem

• cannot connect to the local network using windows 7

  Recently bought a HP Pavilion laptop (AMD Athlon II P320 Dual - Core) ((G62 - 208CA)). Having a problem connecting to the local network. I have flashing lights on the lan (orange and white) connector.

  Using the ipconfig command, I get an IP address, subnet mask and gateway by default however messages below will appear:

  Tunnel adapter isatap. <578608BD-22EF-4A01-90ED-D709CB81D027>:

  State media: media disconnected

  The connection-specific DNS suffix. :

  Tunnel connection to the Local network adapter * 9:

  State media: media disconnected

  The connection-specific DNS suffix. :

  Tunnel adapter isatap. :

  State media: media disconnected

  The connection-specific DNS suffix. :

  TEREDO TUNNELING Pseudo-Interface tunnel adapter:

  State media: media disconnected

  The connection-specific DNS suffix. :

  Tunnel adapter isatap. our field: *

  State media: media disconnected

  The connection-specific DNS suffix. :

  I tried to turn off the firewall and connect without success

  My network card is a Realtek PCIe FE Family Controller and confirmed that the drivers are up to date

  Any help would be appreciated

  Thank you

  Well Yes! So it was an older version of the bonjour service... thank you Adobe.

  You can find the latest version here:

  http://support.Apple.com/kb/DL999

• Win7 computer cannot connect to other computers Win7 network "\\computername is not accessible. You might not have permission to use this network resource ".

  I have a Windows 7 (box A) system that cannot connect to files shared on another computer in Windows 7 (box B).

  • On the 'network card' and 'See the network computers and devices', I can see box B of area A.
  • I can ping Box B of area A.
  • I can connect on MEDIA sharing on box B of area A.
  • Area C (another system of Windows 7) I can connect to the B area and am presented with a box of authentication to connect to the shares (i.e., box B works as it should).

  But the box has double clicking on box B or using \\computername or \\IP_Address the dialog box run, I get the error:

  ----

  \\computername is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.

  The network is not present or not started.

  ----

  I know that the system is available, because the area C can access... But something's not on the box... It cannot connect to zone B or C. Box

  I have disabled the firewall on both systems without result.

  I reinstalled the network adapter and Client for Microsoft Networks is installed on the box.

  Yet somehow box's not connection to other computers on the network.

  Any thoughts on what I should check would be appreciated.  Thanks in advance for the help.

  OK... so I was able to track down and get it fixed...

  I found another symptom (that would be a good way to check and see if you experience the same problem).

  In the network and sharing Center, I clicked on "Change advanced sharing settings" in the left column. I found that the radio button under "File and printer sharing" was put on the OFF position.  I started and saved the changes, but when I returned in these settings, it is once again in the off position.

  It turned out that the workstation service is set to disabled (which also caused the computer browser service for not being able to boot). I activated the workstation service, started, and set it to automatic.  Then did the same for the computer browser service.

  Both of these services running, the "File and printer sharing" it will remain actually on IT, and I am able to connect to other devices on the network in the way I had to.

  I can't mark this message as the solution (perhaps because I posted it?) so if someone he will quote as their response to the post office, I'll be able to mark as answer.

• question of vSwitch transmission of local area networks VIRTUAL VMWare ESXi, Vsphere 5.0 5.0

  Having little experience VMware, I entrust the task to try to see why one of our VLAN does not work on one of our servers ESXi 5.0. I will try to be as descriptive as possible.

  The issue began just after works well for months, when it started for starting and running config had not been updated for several weeks on the router and switch.

  Our server has 4 0 1 2 3 physical NICS

  0 and 1 are associated together on VLAN1 and are also used for the management network

  Map NETWORK 2 is used for 111 VLAN (network connect our wireless users to so that they cannot interact with VLAN1)

  3 NIC is connected to the VLAN 66 (a network for video and deployment services)

  These 4 physical network adapters is connected to three different vswitches as follows (I'm not the one who created these so don't ask why they are as they are)

  a vmnic0 and vmnic1 vSwitch0

  vSwitch1 has vmnic3

  vSwitch2 has vmnic2

  All these ports are physically connected to a Dell PowerConnect 5548 switch

  vmnic0 to:

  interface gigabitethernet1/0/24

  Description "VM Server 1.

  switchport mode general

  switchport general allowed vlan add 111 tag

  VLAN allowed switchport General add 1 unidentified

  VLAN banned general switchport add 5,66,98

  vmnic1 to:

  interface gigabitethernet1/0/17

  Description "VM Server 2."

  switchport mode general

  switchport general allowed vlan add 111 tag

  VLAN allowed switchport General add 1 unidentified

  VLAN banned general switchport add 5,66,98

  vmnic2 to:

  interface gigabitethernet1/0/6

  Description «VM Server 3»

  switchport general allowed vlan add 111 tag

  VLAN allowed switchport General add 1 unidentified

  VLAN banned general switchport add 5,66,98

  switchport access vlan 111 (tried several different configurations on this port that Trunk including 1 unmarked and 111 the tag as VLAN 1 and 111 come through the router on the same port. Also just a base switchport mode access vlan 111)

  vmnic3 to:

  interface gigabitethernet1/0/43

  Description "VM Server 4.

  switchport access vlan 66

  If I plug a laptop computer into im int 1/0/6 I get an IP address from the DHCP server, and you can get online. When I go into the properties vSwitch2 and go to VMKernel and try to set it to automatically get an IP address, I get a 169.254*. * address. There is no connection if I statically set the address of one knowledge is available yet. I'll add more information later if needed, I have a meeting in which concerns another project. Anyone who can help, thanks in advance. If you need specific information, I will answer as soon as POSSIBLE.

  On the configuration under maps page network vmnic2 has no observed IP address ranges and I do not know how to change the nic to perhaps add the addresses

  I would try to eliminate the physical NETWORK adapter on the host being the issue. Silly question, but is there a link light? Drop a sniffer out there and see if there is no traffic passing if trying a different physical nic does not help.

• I don't see local area network. Win 7, IE 10. How can I do so?

  I do not see local networks with my win 7-64 bit, that is to say 10.  How can I do so?

  Hi David,

  Please answer a few questions to refine the question.

  1. When you say LAN. you earn to the available network connections?

  2. are you using wired or Wi - Fi?

  3. are you able to access the network with other browsers?

  Try to run the network troubleshooter and see if that fixes the problem:

  Check out this link to do the same thing:

  Network convenience stores

  http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters

  Provide more information so that we can help you.