Bluetooth cannot connect to wireless (MW600) headhones/microphone

Similar Questions

• My laptop cannot connect to wireless internet. Ethernet works fine. Wireless is enabled on the laptop.

  original title: portable wireless problems

  Hi guys, my laptop cannot connect to wireless internet. I tried to use ConfigFree Diagnostic tests already installed on my computer, reset the router, and even taking on the router for 30 seconds and put it to. On my laptop wireless switch is turned on, too. Is the only way I can connect to the internet via an ethernet cable and I started to disconnect from the wireless internet just yesterday. I know that my router is not the problem because I have a laptop connected to her brother. Also, I tried the FN + F8 key on my Toshiba laptop. Thank you in advance.

  Hello

  Is this also your thread with a different name?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/wireless-Internet-on-laptop-not-working/aedbda38-a56e-E011-8dfc-68b599b31bf5

  ====================================================================

  To do a hard reset on the router and the modem, you must feed their STOP, wait 3 minutes,
  then then turn on the modem on - when it comes back - router - when it is set to zero
  computers.
  ----------------------------------------------

  Anyway the same answer applies: update WiFi driver that something has probably
  He touched. Make sure that the wireless device is turned on, if there is a switch on the computer.
  Many Toshiba have a WiFi switch on the front or side.

  Update the driver WiFi, use the wired (NIC) to download the driver or do it on another
  system and your transfer on removable media such as CD, DVD or a USB key.

  Control Panel - device - network - WiFi note the brand manager and full
  model information - double click - writing tab Drivers version - then power management tab uncheck "allow the computer to turn off this device...". »

  Then on the tab driver, click Update driver (this can do nothing as MS is far behind
  drivers of certification) - then right click on the device - UNINSTALL - REBOOT - this will
  update the driver stack.

  Go to system Maker and search for the WiFi Driver updated - download - SAVE - go to
  where you put it - make a right click on it - RUN AS ADMIN - REBOOT

  Then go to the site of the manufacturer of the device and get even more recent (Realtek, Intel, or one that makes
  the device) and try the install again.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ====================================================================

  Check with Toshiba support, their drivers online (update or reinstall) and their forums.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  I hope this helps.

• my Bluetooth cannot connect to my shoqbox

  connection come with a pop-up alert indicating that "Audio driver is not available, please make sure that the audio device works properly.

  Edit:

  Re: my Bluetooth cannot connect to my shoqbox
  Thanks for the reply. tried the methods you suggested but no luck. The pop alert is that when I try to connect my Philips Shoqbox Bluetooth speakers to my laptop. on its own my phone have no problem with the sound, it works very well. Just to tell you in my page of my Shoqbox Bluetooth device is associated.

  		Re: my Bluetooth cannot connect to my shoqbox SEE SLIDE SHOW DOWNLOAD THE SET This album has 3 photos and will be available on SkyDrive until 07/07/2013.

   

  Hello

  As the problem seems to occur only when you connect the Philips Shoqbox Bluetooth speaker to your laptop if you may need to install a driver for the same that is missing or a utility.

  Contact Philips support so that they could help you with this problem.

  http://www.USA.Philips.com/c/audio-system/black-8W-sb7200_37/PRD/en/;JSESSIONID=1D21084BD91239AF8C44EFC0204D96E9.app121-drp2?t=support

  It will be useful.

• Satelite C50 - B cannot connect to wireless local area network

  My brand new straight out of the box Satelite C50 - B cannot connect to my wireless network, when you are running Windows 8.1.

  When you run the wizard for the first time user, it was unable to connect to my network to register. And I have been unable to connect after starting the OS, even if my thread was visible and the signal strength would be strong. I entered the security network key, but the message came back "unable to connect to this network.

  However, when I started on a USB key to run Linux Mint 17.1, it took less than 5 seconds to connect to my wireless network. If the Toshiba hardware work properly, as also my wireless LAN.

  If I plug in a network cable, same Windows connects to my network and Internet.

  However, given that the C50 - B satellite comes with Windows 8.1 both of wireless capabilities, I was hoping someone here might be able to help me get a wireless connection in Windows.

  It's really strange. I have S50 - B and WLAN works properly. I used my laptop connected to several different networks and everything was OK.
  You can try to test with different wireless LANs?
  Have you checked all the WLAN settings?
  Try restarting your router.

  I mean if your laptop can detect WLAN, this means that the hardware is enabled and working properly. There must be a problem with the WLAN settings.

  Also check the advanced power settings, and then set it to maximum power WLAN.

• Satellite A505 - sees, but cannot connect to, Wireless Router Win7

  I have a laptop Toshiba A505-S6980 running the 64 bit version of Windows 7.

  It worked fine a few months previously, to connect wireless to my O2 2 wireless router (the notebook has a REALTEK RTL8191SE wireless card).

  I also have a desktop running XP computer that I use to connect to the same router. While on the desktop, I noticed several weeks ago that the router has been implemented with no WPA and WEP security, so I decided to change the router to WPA. The desktop PC was fine with this, but the laptop complained and wouldn't connect, failure of authentication and just stating "unable to connect to xxxxx". At the time I assumed it just couldn't handle the WPA authentication for some reason any and decided that I would probably turn to WEP to a later date to make it work again. At some point, I remove a ' O2 Connection Manager ", which had been installed when I bought a 3G dongle O2, where he has confused the issue, but it made no difference. In the meantime, I tried to connect the laptop using a wired connection and worked well.

  I now (a few weeks later) decided that I wanted to use the wireless laptop then redefine the router to WEP expect this to work, but it didn't. As with WPA, he did not get past authentication when I put the key to security in. So, I try to understand the problem...

  What happens;

  (1) the wireless laptop sees my router (and neighbors), but just cannot connect.

  (2) I can connect with a laptop computer on the same USB wireless adapter.

  (3) I can connect the laptop to the router using a wired connection, and there is no problem.

  (4) my desktop running XP computer can connect to the router as WEP or WPA Wireless if the router is ok.

  (5) this worked several weeks ago!

  What I've tried;

  (1) I have installed the latest REALTEK RTK8191SE driver.

  (2) I tried to disable the security on the router, no joy.

  (3) I deleted all the profiles of network on the laptop.

  (4) I have tried with Norton antivirus and firewall disabled (but have not uninstalled) but no help.

  (5) I tried to do a restore of the system to the closest possible point and no help.

  (5) I uninstalled the wireless network adapter and its driver in Device Manager... Windows 7 can see the of it after a reboot and re - installed (using the old default driver), but it does not work. Then, I re-installed the latest version from REALTEK to ensure that it is up-to-date.

  What's weird is that

  (1) it works ok using the wireless USB adapter

  (2) the integrated REALTEK wireless adapter works to a point such that it can SEE my router, connect simply do not

  (3) authentication failure almost instantly

  My suspicions are that an automatic update of Windows 7 or the O2 Connection Manager has somehow screwed it upward. I have uninstalled the O2 connection manager and tried to uninstall the automatic updates but there are many of them and I don't know how far back, I need to go. Also, because it authentication immediately, it seems that it is not giving him a chance to actually work.

  Does anyone have any ideas on how I can proceed or had a similar problem?

  This is a really silly situation. In any case, I recommend you to use the Toshiba WLAN drivers only.
  I put t know what Realtek module is inside but try please install driver WLAN http://aps2.toshiba-tro.de/wlan/?page=downloads

  All that you have done is logic and I think I will try the same thing.
  Have you tried to connect to WEP or WPA is disabled? I mean free WLAN without protection.
  Have you tried to connect your laptop to a friend's router?

  I really put t know what is the problem here but there are a few bad setting it.

• Cannot connect Logictech Wireless Gamepad F710

  I can't connect my laptop Logictech Wireless Gamepad F710. When I plug the USB of my laptop, Windows cannot recognize device and view who cannot install driver.

  I use Windows 7 SP 1.

  Please help me

  Hello

  (1) what is the number of brand and model of your laptop?

  I suggest you to follow the steps below and check if it helps:

  Method 1: Try to run the hardware troubleshooter and check what the problem is and fix it accordingly.

  Follow the link below a convenience store opened.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

   

  Method 2:

  I suggest to return the item and try to run the troubleshooter and check if it helps.

  Tips for solving common driver problems:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  Method 3:

  So I advise you to install the drivers Wireless Gamepad F710 below form and check if it helps.

  http://www.Logitech.com/en-us/441/7361?softwareid=6298&OSID=14§ion=downloads

  Hope this information is useful.

• L830 satellite - Bluetooth cannot connect after installing Win 7

  I reinstall (Windows 7 Home Premium) on my laptop PSK84V-02400UAR Toshiba Satellite L830, and install all the drivers, but after you install all the drivers, I can't connect any Bluetooth device to this tour...

  When I search using the Bluetooth window it shows in the search window and after a while ' * could not detect the remote device * ' *... Kindly help... awaitng your valuable response.

  Can you please post exactly details how you installed the software and drivers Bluetooth?
  I think that you have made some mistakes there

  Your laptop supports the Atheros WLan card. Right?
  I think that this Atheros WLan card compatible with BT as well. This means that you need to install a special driver that allows to share WLan and BT in a single module.

  This driver calls filter for Atheros Bluetooth driver package.
  Therefore, install the driver Atheros Wlan, Atheros Bluetooth driver filter and battery Toshiba BT package.

  Then BT must be installed correctly and you should be able to activate it in order to start the pairing process.

• Satellite T210-113 - Bluetooth cannot connect to Office communicator Mobile Windows

  Hello!

  For some reason that I can't connect my laptop Toshiba, which integrates the latest version of the Toshiba Bluetooth Stack and my Communicator with Windows Mobile 6.5

  The devices seem to get paired impeccable, but there is a mistake, they can't connect whenever I try to connect to another. Any suggestions on how to connect my devices?

  Moreover, the simple transfer of files between them works OK. It's when I'm trying to pair and connect devices I get this error

  Hello

  Here you can find a list of the different Bluetooth - how-to documents.
  http://APS2.toshiba-tro.de/Bluetooth/?page=HOWTO

  Is very interesting this HowTo:

  + How do I set up a connection from the PDA (Windows Mobile 6) to the Windows Mobile Device Center.
  http://APS2.toshiba-tro.de/KB0/HTD9602MY0000R01.htm

• Satellite M30-154 cannot connect to wireless internet (wifi)

  Hello

  I did a recovery of product on my m30 - 154 a couple of days, and now it doesn't connect to the internet wireless, we have in our House. He sees the SSID, but it just connect, I have already made an update of the BIOS and an Intel update and I don't know what to do now. Can someone help me?

  see you soon

  > he sees the SSID, but it is enough to connect

  The SSID is secure. Right?
  Can you connect to open Wlan?

• (Not ready) TosBtMng.exe during closing. Bluetooth cannot connect devices

  I noticed that my bluetooth stopped working recently. I can't connect or find near devices.
  I can not open bluetooth settings or any application bluetooth came with my laptop. I have a bluetooth module and everything built in.
  It was then that I noticed that whenever I tried to stop my laptop, one 'not answer' or 'not ready' message kept popping up to TosBtMng.exe.

  I tried to uninstall my previous bluetooth batteries and reinstalled the latest, but the same problem keeps occurring.
  TosBtMng.exe installation rail smoothly however, continues to be unresponsive.

  In Device Manager I see:

  + Bluetooth
  -Bluetooth RFBUS
  -Bluetooth RFCOMM
  -BluetoothRFHID
  -Bt-183 Bluetooth 2.0

  + Ports (COM & LPT)
  -BTPort (COM10 - COM14)
  -BTPort (COM20 - COM21)
  -BTPort (COM6)
  -BTPort (COM65)

  I understand that there should be something under system and USB devices, but I don't see anything else.

  I used ([http://support.microsoft.com/kb/315539/EN-US/ | http://support.microsoft.com/kb/315539/EN-US/]) this link to view non-connected devices and I see a whole bunch of phantom ports. I do not know how to connect these ports. I tried Bluetooth Com Local, but who does not work either.

  I read several posts on this forum about it, but I've not seen a solution. Maybe I missed something? If anyone knows of one, could you please direct me to this solution? Thank you!

  At first, I have to say that it will be interesting to know what Toshiba laptop you have and what operating system you are using. I assume you are using Windows XP Home edition. am I right about that?

  I use BT on my WXP preinstalled Satellite M70 nearly two years now and everything is working fine. If you can't get this to work using BT more recent battery maybe you need to reinstall your laptop using recovery media delivered.

• Cannot connect my wireless 3054

  I use a Windows 7 laptop, wireless to router DLink DI-524 and we tried tirelessly to connect my printer HP 3054 I just had, him. I ran the download of "connection doctor", warm reboot both the router, modem and printer, then restart the computer. It allows to print via a usb connection and when I printed the report to the printer, it said that everything is connected and "passed" the tests.

  Any help would certainly be appreciated.

  Hey there

  Thanks for getting back to me, I some ideas more.

  1. Perform a clean - boot (how to perform a clean boot) and restart the PC
  2. Make sure that your firewall is disabled (Disabling and Re-enabling your software firewall in Windows)
  3. Restore the default printer and run again through the wireless setup and take note of the IP address of printers
  4. On your computer, click on start and type CMD in the search box (right click and open as administrator), when the command prompt box appears, type 'ping then the printers, example 192.168.x.x IP address' and press enter
  5. Save a screenshot of ping and post results please get back to me

  Thank you

• Suddenly cannot connect to wireless internet

  All of a sudden, my laptop does not connect to the internet.  I did nothing different and same fact a system restore from a month ago, but nothing has changed.    Use the Atheros AR 5005 G wireless network adapter.  Recently moved to Cleveland, OH, Houston, TX, and given that the move will not connect.  I tried to configure using the Wireless Zero Configuration (WZC) in accordance with article 871122, but it still doesn't work.  Help, please!

  (1) make sure that u run "NET START WZCSVC" on the command-line as soon as u Ouvrezunesession WINDOWS XP (START, RUN, NET START WZCSVC (command line)).

  (2) START, CONNECT, WIRELESS INTERNET CONNECTION

  --> under the 'GÉNÉRAL' tab: (1) right click on the wireless Internet connection; (2) click on properties; (3) make sure that all THE ELEMENTS under the title "THIS CONNECTION USES THE FOLLOWING ITEMS" are COMPLETELY FUNCTIONAL, i.e. UNCHECK THE ONES THAT DO ARE NOT ACTIVE ~!  (I recently turned off AVG and that this item has been inadvertently clicked on ~!) ;

  --> on the 'ADVANCED' tab: run the NETWORK CONFIGURATION WIZARD to reset your network

  3) http://support.microsoft.com/kb/871122 --> RUN 'DIFFICULTY CE PROBLEM' (ms - fix 50469)

• Cannot connect Router wireless and wireless for windows printer

  I can connect to a wired router and print. But can't do wireless?

  I can connect to a wired router and print. But can't do wireless?

  Given what you have... Yes - no idea.

  If your Windows Vista-based computer has a network inside wireless device and it has the correct driver and software installed and that you have configured the router (if you know the settings) then sees the network wireless on the Windows Vista machine and can configure to match how you have configured the router - there is no reason that you should not be able to connect to the site because you are in-Beach/without any noise between yourself and the router other than equipment of poor quality or poor quality software.

• Cannot connect using wireless after Windows7 clean load. Computer recognizes the router but have tried several ways to connect but not joyl

  Intel noted some problems with the Intel(r) Active Management Technology-SOL, but also their Intel (R) Management Engine Interface. I checked with the help pages to download Lenovo and downloaded what I could but still an unable to establish a wireless connection. T400 Thinkpad Lenovo. Thank you guys

  Hello

  It seems that there is a known problem with Wi - Fi in T440 ThinkPads. Follow the steps in the article mentioned below and check if this solves the problem.

  Troubleshooting Wireless - ThinkPad problems
  http://www-307.IBM.com/PC/support/site.WSS/MIGR-50402.html

  If the problem persists, then contactLenovo's Support for assistance.

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers Feedback Forum and tell us what you think.

• Publisher cannot connect printer wireless Officejet 6500 has E710e and the laptop over the network

  I just changed my ISP and moved to British Telecom, who sent me a new router. The new service is in place and working well and I reconnected my Officejet 6500 a E710e CN557A to the wireless network. But I can't connect the printer to my laptop no matter what I try. I have uninstalled and reinstalled the printer on the laptop using the original CD and then updated to the latest drivers. I even reset the printer to default and then network related setting before attempting to connect the portable computer whose IP address of the printer without success. My laptop OS is Windows 7 32 bit and the printer is just over a year. He worked like a dream with the old wireless network.

  I have already downloaded on my laptop HP - HP Print and Scan Doctor diagnostic tools and troubleshooting network printer connection. Printing and scanning doctor can't see the printer and I followed the instructions of troubleshooting without success.

  Any help and advice would be much appreciated.

  If it is a BT Home Hub, they don't play well with HP wireless printers.

  You can try this - remove all instances of your printer in Control Panel > devices & Printers. Then:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing. Get his IP address for a network Test printed on the front of the printer.
  2. click on > start > Control Panel > devices & Printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.