Cannot connect printer B210a for Mac 10.7

Similar Questions

• Cisco Connect v1.4 for Mac - cannot add the USB printer

  I just installed Cisco Connect v1.4 (11266.0) and have updated my software 1.0.03 E4200.

  I want to add a printer USB connected to the router, but when I open the Cisco Connect, then select the "add new devices... "button, the only option for a printer is"Wireless Printer", not"Printer"followed by USB or wireless user guide. There is now way to add a USB printer. Any suggestions?

  Hello.

  It is an old Bill, still not fixed!

  http://homecommunity.Cisco.com/T5/Cisco-connect/no-option-for-USB-printer-on-Cisco-connect-1-4-11266...

  Greetz

• Cannot connect printer to mac - status is idle

  I'm fit to be tied for no reason at all, my HP Officejet 6500 printer is connected, but it won't print anything because it says that there is no connection. utility, says the status is idle - cannot figure this out for what whatever - what happens in the world I'm missing?

  Hi @lindyd ,

  I see that you are getting a message "that there is no link. I can help you.

  Check the connections, if you are using a USB cable.

  Try a different USB cable, if you have one available.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click the Apple icon, and then click System Preferences.

  Click on printers and scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the + sign to add the driver, you may need to click the drop down menu to select the name of the printer, and then click the Add button.

  Test the printer again.

  What operating system do you use? Mac OS X: how to find which Mac OS X Version is on my computer?

  How is the printer connected? (USB, Ethernet, WiFi)

  If you need help, let me know.

  Good day!
  Thank you.

• Printer driver for mac 10.5.8

  Many blogs suggest not to install the HP software but just install the printer drivers. What printer driver for hp officejet 6500n for mac 10.5.8 need me and how he do it please?

  Hello

  These tips are for users of 10.6 and 10.7.

  Being under 10.5, you can download and then install driver HP.

  Here is the link, if I had the model correctly: HP Officejet 6500 Wireless all-in - One Printer - E709n

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-67776-1 & CC = US & DLC = in & LC = on & os = 219 & Product = 3795406 & sw_lang =

• Cannot connect blue ENV3 for Compaq Vista laptop

  In recent weeks, my phone, when plugged into my laptop Compaq with Winows Vista, is recognized as an unknown device. Before a few weeks ago, my cell phone from Verizon enV3 blue connected very well and I have acquired more than 400 songs on the sd card on my phone without many problems at all.  I know this isn't my phone that has the problem because I replaced it a few days ago with a new phone from Verizon enV3 blue cell phone to try to resolve the problem, and it still wouldn't work.  It is also not the cable that I use, which also allows to connect my phone to my adapter to recharge, connect my phone to my laptop because the local Verizon store, the person who helped me was used two of the same type of cell phone chargers and the same message came on my phone , who did on my charger, so I'm pretty sure that's not the cable.

  That leaves my laptop as being the owner of the problem. He is never asked a driver to connect my phone to my laptop until the problem occurred a few weeks ago.  I thought I downloaded two drivers for it to work, but neither helped. So is there something that I'm supposed to do to connect the driver for my phone or what? I desperately want to get more music on my phone! Ask if you need more details and thank you in advance for responding!

  * original title - my phone, when plugged into my laptop, is recognized as an unknown device, so it does not synchronize with windows media player. *

  Hi Jorcar316,

  Please see the link next to the Web from LG site:

  http://us.lge.com/support/download/search/1000000314_EN_SO_.jhtml

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Cannot connect to Games For Windows Live

  I used to connect, but now I can't connect to Games for Windows Live in Resident Evil 5. Here are the steps I've tried and have failed.

  1. Sync would have time with internet time.
  2. Assigned a static IP in my router and forwarded the ports UDP 88 and TCP/UDP 3074 to this IP address.
  3. Give my NIC priority in the data card advanced.
  4. Downloaded the latest version of gfwlivesetup.exe.
  5. Deleted my internet cache.
  6. Has allowed the application of GFWLClient.exe in my Windows 7 firewall.
  7. I have all the criticism and non-critical Windows updates installed.

  I can connect on the market very well out of the game. Here is the information on my network settings from in the game.

  • Network adapter: network Local 2 connection (my Local Area Connection 1 is disabled)
  • Internet IP address: Not logged
  • Local IP address: 192.168.1.60:0
  • The system link address: 192.168.1.60:3074
  • Account PC: PC.000001A56CA8
  • UPnP: Not signed in
  • PC ID: 0XA7906366EECD27EE
  • NAT type: open

  Any help would be appreciated.

  Hello

  Please contact the Microsoft Community.

  I wish that refer you to this article for assistance more-

  http://forums.Xbox.com/GFW/games_discussion/default.aspx

  We know if you need help.

• BlackBerry Smartphones cannot connect to Facebook for Blackberry

  I hope someone can help me.  I can no longer connect to Facebook for Blackberry.  I get a notification that my combination of email ' password is incorrect, with a 'hint' that the passwords of Facebook are breaks (2401) I know my combination are correct, that I use to log on via the browser or a desktop computer.  A understatememtn is frustrated because I've had this problem for about a week now!

  I did the following:

  • uninstalled the FB app
  • delete the book of serv ice
  • made a pul battery
  • reinstalled the FB app

  No chance!

  Try to go to Facebook on your PC and set the password to something really simple (for now) with no numbers or cap letter.

  Then try again?

• Cannot connect two computers for games.

  I am trying to connect two computers for games (Age of Empires 3) purposes, but when is connected the two with a cable ethernet (using a filter at one end adapter) nothing happens, I can't see not his computer on my laptop and it can't see my computer on his. In the game, I see his match but he can't see mine, and when I try to connect to the sound he says impossible to reach. Tried to make it work for days now and I'm at the end of my rope PLEASE HELP!

  As a quick test to go Control Panel - firewall Windows and disabling the firewall to see if it works. If you have a 3rd party software AV Firewall control may be in this control panel software.

  As the two PC is connected back to back without access to a DHCP server, they should award an APIPA IP address that should work. To eliminate the problems addressing assign a static IP on both.

  Properties of the Control Panel - Network and sharing Center - change adapter settings - Rt click on Local Area connection-

  In TCP/IP V4 each assign a static IP 192.168.0.X where x is between 1 and 254 and the 2 PC's are different so for example10 and 20, 100 or 1. The value of 255.255.255.0 subnet mask, save the changes and test the connection.

  If disabling the firewall resolves you can add an exception to the firewall program to allow the age3.exe through the firewall. More information here, as you ar accommodation only play locally just look at the top.

• Cannot find printing software for hp6510 for yosemite bk mac pro.

  I'm unable to locate printing to my hp b211a software for my mac pro 6510 using yosemite bk.  Appreciate any help.  Thank you!

  Hi @Esspee

  I found the full feature software and driver for you to download and install on Yosemite;

  Exit the: 2014-10-22
  File name: HP-inkjet ink-SW-OSX - Mavericks_v12.34.39.dmg [1/1, 126.83 M]
  Version: 12.34
  Compatibility: Mac OS X 10.9 & Mac OS X 10.10

  If this resolve your request, please let me know by marking this message as "accept as a Solution. Thanks.If you need help, I'm here to help

  -In support of Movember

• Cannot connect printer to the internet for instant ink service

  Installed Flash cartridges for the first time to my printer Officejet Pro 8610. The printer prints very well, but it is not connected to the internet by message on the printer screen. I checked the connection to the wireless router and it is connected correctly. I can also print from my remote legacy, iPhone, iPad, etc. "When I try to connect to the internet the printer, I get the following message appears on the printer screen.

  "Update conflict

  Web services and the HP printing software are updated on the computer or the built-in webserver (EWS). Wait for the update to finish and then try again. »

  When I go on the 'connected' site, it shows the registered pronter but it shows that the printer is "offline". When I try to update, nothing happens.

  Thank you very much. Worked the first time.

  Steve Raimondi

  happytohelp01 wrote:

  Hi @sraimondi,

  Welcome to the Forums of HP's Support.  I see that you get an error message of connection on your printer Officejet 8610.

  Please define Manual of the printer an IP address manually and DNS servers.  I've included a link to another post which has the steps with screenshots on how to do it.

  Please let me know the results.

• Cannot connect in iMessage on Mac. ID and password.

  iMessage spontaneously told me to open a session, but don't connect. My ID and password are correct. I even reset my password to see if it would fix it. iCloud and other apps Apple ID/functions work fine. iMessage on my Mac does not work. iMessage on my phone is fine. Do not know what to do...

  

  Hello

  Each connecting to servers iMessages is specific device using the serial number of the device.

  In some cases have replaced mother/logic card may cause that the person performing the repair is supposed to "return of flame" the serial number for the new Board of Directors.

  About this Mac (high Apple Menu icon on the left) the serial number appears in preview in the Yosemite and El Capitan.

  While it is supposed to be a feature security a number of small but significant people find iMessages connection to various updates or updates it stops working.

  Test your Apple ID in iMessages in another Mac user account (System Preferences > user and groups). Create a 'test' account or select th option invited and connect to this account.

  If it works here then the problem is with your Mac user account.

  If it doesn't work it is more likely to be at the server end, but there are other things you can try.

  How to reset the NVRAM on your Mac - Apple Support

  Try a secure start

  Do these two things separately and test Messages between the two.

  If at this stage iMessages will still not connect, you will need to contact the Apple Support (even and Apple Care)

  Explain that you have a problem with Apple ID with the Mac connection to the iMessages Server (Apple ID issues are free to set).

  Chances are the level 1 players will not know what you are talking about because they use Scripts to handle phone calls.

  Ask to speak to someone more important, particularly if they appear insistent and you pay.

  Level 2s can vary with some knowledge about the issue and others work more blindly) (there was a post here where level 2 under a code number which has arisen in OS X 10.8.2 recently updated with the introduction by using the serial number).

  Apple are aware that this security feature fires for some but not why.

  Level 2 may ask you to try other things and also do data collection.

  Ask them to check the iMessages server and see if it does not block your Mac.

  Ask them to put this.

  At this point, they may involve engineers who seem to be the only ones who can reset the server.

  Reinstall, upgrade or even a simple update don't work - it's a question of end of the server.

  Judging by what others post back to talk about their experiences you can get told anything between 24 hours and 5 days to "Fix" (and in some cases a return phone calls to check).

  Most report it seems 'resolves' as it is rarely if ever a return phone call.

  This problem of not being able to connect (or in some cases to looking like you are connected but then all contacts turn red, then you cannot select them - or learn as much as by pressing send only to see "not delivered" for each iMessage) has happened since the Cougar in any form where the form.

  It is probably fair to say that there has been changes and now it seems to a form any operating system level change.

  We who post regularly have not found a quick process to face to get through Apple Support.

  

  20:26 Monday; August 1, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• 300 satellite - cannot connect printer

  We have 2 Toshiba laptops, the other more old works perfectly and printing wirelessly via the NetGear print server, just bought the satellite 300 and no matter how hard I try cannot get the laptop to print wireless - can go through all the installation procedures, says he recognizes the printer, but as soon as I press to print the test page , he returned to "error".

  I then have to remove printer, uninstall the plug in the USB cable, plug-and-play drivers involved and I am able to print via usb cable, but I really want to print wireless!
  Can anyone help?

  The two notebooks use the same operating system?
  I mean that so old works with Windows XP Home edition and new with maybe Vista you don't have good drivers Vista. Who knows what is the problem here?

  In my opinion, you should contact the manufacturer of the printer and ask what can be the problem. If the WiFi on Toshiba laptop working fine and you can connect it to your router for Toshiba is the end of the story.
  Please don't get me wrong, but all questions with external devices are clarified with the manufacturer of the product. They have enough experience with own products and I'm sure they can help you about this.
  Do you agree with me?

• set up a Brother HL2170W to print wireless for Mac book Air

  I have a Brother HL 2170W printer that is able to print wireless.  Having problems becoming it implemented.  Do not know what I do and there seems to be too many options.  Y at - it an easy way to put in place to work with my Mac book Air...

  It took me 6 years to finally make it work on Mac OS X Sierra and Win10 wireless! I used to connect to the router with the Ethernet cable.

  FORGET what brother can offer about the installation, they make unnecessary difficult.

  1. first of all use your connection Ethernet (printer with router) and mark the IP address of the printer: 192.XXX. XX. XX

  2. use any browser, type the IP address in the search bar and press return.

  3. you will be to set up printer Web page, allowing you to make changes: SSID, WAP2 password, etc.

  You will need administrator access to change settings: user: admin password: access (can also be found in 'Help')

  Better to download and install the BRM clear admin tool to find the new IP when a wireless connection for the changes to come.

  The Mac automatically finds the printer and driver.

  Good luck.

• Cannot connect wireless C4780 using mac/airport

  I searched through the previous posts but can't seem to solve this problem.

  I will try to give all the relevant information...

  I have a new MacBook Pro - Snow Leopard OS x 10.6.4.  I have a wireless connection to the internet with an airport that is about 5 years old & have had no problems with internet connections.  I use a WPA security to access my wireless network.

  After unpacking the printer, there is a note that says that the cd is not compatible with mac OS X 10.6 & don't not to install.  All the functionanlity is included with Snow Leopard.  If I plug it in with the usb cable, I can print.  I can't understand how to set up wireless well.

  When I look in Preferences system under printers, printer stands, but is disconnected.  If go into options... pilot, it's that nothing indicated for this printer.  Another post mentioned about 'add the wireless client', but this option is grayed out in my menu.

  I'm savvy software - but not so much with the end of material, so please give very specific instructions on what I need to do to try to get it up & running.

  Thank you.

  Well, the printing functionality is built into the OS, but not the possibility to set up the network portion of the printer.

  I don't know how old your airport is - is it a form of fungus or a square box?  If the later, you can use WPS and I can help you.  If the fungus, you will need to load the software.

  Download the software right here.

• Cannot connect printer hp on my macbook air even if the two are shown to be working normally.   software is updated.

  My hpprinter is on you, months and are using wireless since the purchase.   Suddenly however the link between the Mac and the printer is not there and everything I've done to try to establish the connection it does not.   Should I uninstall the printer and start over? Or someone who has experienced the problem there any other suggestions?

  Open system preferences > printers and Scanners and select the print tab.

  Right or control click on the printer on the left, then click on reset the printing system.