300 satellite - cannot connect printer

Similar Questions

• Cannot connect printer B210a for Mac 10.7

  E-all-in-one printer cannot connect to iMac 10.7, error: turn off device if this does not solve the problem and the unit is broken and can not scan, copy, print.

  Installed the software and everything seems fine, so I try to print and could not communicate with the device, then scan and the same problem.

  The wndow in the printer displays the above message.

  Have uninstalled and reinstalled and still not connect, however the wireless can see the printer and my modem but cannot print, scan, copy

  any suggestion

  If you can not make a copy from the front of your printer, there is something wrong with the printer in-house.

  The printer turned on, unplug from the back of the printer for 30 seconds about and try again.

• Cannot connect printer to mac - status is idle

  I'm fit to be tied for no reason at all, my HP Officejet 6500 printer is connected, but it won't print anything because it says that there is no connection. utility, says the status is idle - cannot figure this out for what whatever - what happens in the world I'm missing?

  Hi @lindyd ,

  I see that you are getting a message "that there is no link. I can help you.

  Check the connections, if you are using a USB cable.

  Try a different USB cable, if you have one available.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click the Apple icon, and then click System Preferences.

  Click on printers and scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the + sign to add the driver, you may need to click the drop down menu to select the name of the printer, and then click the Add button.

  Test the printer again.

  What operating system do you use? Mac OS X: how to find which Mac OS X Version is on my computer?

  How is the printer connected? (USB, Ethernet, WiFi)

  If you need help, let me know.

  Good day!
  Thank you.

• Cannot connect printer hp on my macbook air even if the two are shown to be working normally.   software is updated.

  My hpprinter is on you, months and are using wireless since the purchase.   Suddenly however the link between the Mac and the printer is not there and everything I've done to try to establish the connection it does not.   Should I uninstall the printer and start over? Or someone who has experienced the problem there any other suggestions?

  Open system preferences > printers and Scanners and select the print tab.

  Right or control click on the printer on the left, then click on reset the printing system.

• P850 satellite - cannot connect Magelland Explorist GC GPRS

  Recently, I replaced my Satellite A200 on Vista with a P850 Satellite running Windows 7.

  I never had a problem connecting the GPS to the A200, but he does not accept the P850.

  The rspg reports 'connected to the PC.

  The P850 responds with "USB device not recognized" (one of the devices attached to this computer has malfunctioned and Windows does not recognize it.). The GPS is listed as "Unknown USB device" and the recommendation is to "try to re-connect. If Windows still does not replace the unit.

  Most of the time Windows does not recognize it always, but the A200 has no problem, grateful that she, so there is no fault with the GPS.

  Several times I got a message something like "this device can perform faster if you connect it to a port high speed." Since all ports are at the same speed that presents a different problem, but from time to time over the years, I got the same answer on the A200 which has only USB ports high speed.

  When I bought the P850 the Getting Started Guide has indicated that I could choose between 32 and 64-bit installation, but Harvey Norman to Mildura seems saved the choice by choosing 64-bit. This could be the reason for my problem and if yes is there an easy way to figure out who or what I have to redo the last work of four weeks?

  Unfortunately I can't go back to Harvey Norman to Mildura until October of next year, and I don't know how useful a WA according to Harvey Norman will be.

  Any help or advice would be greatly appreciated, as I am tiring of execution of two laptops for a job.

  Hello

  I don t think its Toshiba laptop related question
  Your A200 used Vista and the new P850 using Windows 7
  Maybe it is not compatible with the 64-bit... who knows...

  You should check if there are a few known issues with Win 7 and the Magelland Explorist GC GPRS
  For this I recommend to visit the support page of the Explorist GC GPRS Magelland manufacturer.

  PS: you can switch to the version 32 bit... do you must re-run HARD drive recovery (F8-> fix my computer-> HDD recovery)

  Maybe, he will work with 32 bits of the system

• Cannot connect printer to the internet for instant ink service

  Installed Flash cartridges for the first time to my printer Officejet Pro 8610. The printer prints very well, but it is not connected to the internet by message on the printer screen. I checked the connection to the wireless router and it is connected correctly. I can also print from my remote legacy, iPhone, iPad, etc. "When I try to connect to the internet the printer, I get the following message appears on the printer screen.

  "Update conflict

  Web services and the HP printing software are updated on the computer or the built-in webserver (EWS). Wait for the update to finish and then try again. »

  When I go on the 'connected' site, it shows the registered pronter but it shows that the printer is "offline". When I try to update, nothing happens.

  Thank you very much. Worked the first time.

  Steve Raimondi

  happytohelp01 wrote:

  Hi @sraimondi,

  Welcome to the Forums of HP's Support.  I see that you get an error message of connection on your printer Officejet 8610.

  Please define Manual of the printer an IP address manually and DNS servers.  I've included a link to another post which has the steps with screenshots on how to do it.

  Please let me know the results.

• Cannot connect printer

  original title: try to connect my lexmark x 125 to my laptop to no success need help

  try to connect to lexmark x 125 to my laptop to no help available

  http://support.Lexmark.com/index?page=recommendedDownloads&locale=en&ProductCode=LEXMARK_X125&segment=download&UserLocale=en_AU#1

  There are no. Vista drivers available for this purpose.

  Contact Lexmark and/or buy a new Vista Compatible printer.

  See you soon.

  Mick Murphy - Microsoft partner

• Publisher cannot connect printer wireless Officejet 6500 has E710e and the laptop over the network

  I just changed my ISP and moved to British Telecom, who sent me a new router. The new service is in place and working well and I reconnected my Officejet 6500 a E710e CN557A to the wireless network. But I can't connect the printer to my laptop no matter what I try. I have uninstalled and reinstalled the printer on the laptop using the original CD and then updated to the latest drivers. I even reset the printer to default and then network related setting before attempting to connect the portable computer whose IP address of the printer without success. My laptop OS is Windows 7 32 bit and the printer is just over a year. He worked like a dream with the old wireless network.

  I have already downloaded on my laptop HP - HP Print and Scan Doctor diagnostic tools and troubleshooting network printer connection. Printing and scanning doctor can't see the printer and I followed the instructions of troubleshooting without success.

  Any help and advice would be much appreciated.

  If it is a BT Home Hub, they don't play well with HP wireless printers.

  You can try this - remove all instances of your printer in Control Panel > devices & Printers. Then:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing. Get his IP address for a network Test printed on the front of the printer.
  2. click on > start > Control Panel > devices & Printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• Cannot connect printer to my tablet surface Windows RT

  I recently bought an Epson XP-410 and has difficulties to download the software of the printer from the given site. Whenever I download it it gives me the message "this app can run on your PC." I don't know why it does not allow me to download the software and do not have a USB key to be able to connect to my printer.

  your tablet can only install the software on the app store for windows. the software you are trying to download is not compatible.

  all drivers for printers will either come from windows update when you connect or you can manually select from a list of pre-installed class drivers (which you already on any version of windows) by manually adding a windows printer.

• Satellite - cannot connect to the Internet

  I just bought a new 750 Satalite, it was working fine, then yesterday the internet wireless connection abandoned and now used to connect again. I have other laptops and they are connected to wifi.

  Someone at - it ideas?

  Hi Vanessa,

  You can't find your new laptop the router or not?
  The wireless network adapter is listed correctly in the Device Manager?

  Maybe something stupid, but did you check if the wireless network adapter is always enabled? You can press key combination FN + F8 to toggle the WIFI connection.

  Check this box!

• Laser Jet MFP M127fw Pro: Cannot connect printer Aio App

  I can print via wifi from the printer, but the remote Aio app will not pick up the printer. The installation of word does not appear in the name of the printer.

  Hello

  The HP Laserjet M127fw is not supported by the HP AIO Remote application, not for scanning, or for setting up the printer on your wireless network, any application supported by your printer, is listed below:

  http://support.HP.com/RS-en/document/c03722645

  What task you want to achieve by using the application? as there could be another option for your printer.

  Kind regards

  Shlomi

• Cannot connect to the local file and print when the domain controller is not available because the network connection

  Hi all
  Having problems for local users, connection to a file and print server in one of my satellite offices.
  When my t1 connection is disrupted (problem of local carrier) my users when the connection is down to connect to the file room and print and always have access to their files and the local printer.
  The domain controller is off site in my main office.
  Environment:
  All local desktop clients are windows machines 7.
  Printing and local file is a windows 2003 server.
  DC is window 2008
  Note that we recently changed all 2003 to all domain controllers the PDC 2008, suspect that it may cause the problem, but just cannot know where it track.
  Any help or thoughts would be appreciated.
  Thank you

  Hello trj'hwma,

  Thank you for the question!

  It's discouraging to know that have problems you with the local file and print. As I understand well you cannot connect to the local file and print when the domain controller is not available because the network connection.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  Windows 7 IT Pro category

  Answer to us if you have problems with the local files and print or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• Satellite Pro A200 cannot connect to the wireless network

  Hello

  I have a Satellite Pro A200 and Tuesday night I was able to connect to a wireless network. I received an update, rebooted and now it doesn t seem to work.

  I can see the wireless networks available via the Toshiba Radar but cannot connect to my usual wireless network.
  Also, the wireless network icon disappeared from my system tray and if I go to Control Panel/network connections, I can't even view available networks because there is no option to do so.

  Any ideas?
  the FN/F8 will work?
  Help! Please, I beg you!

  Have you tried using System Restore and restore the operating system on time earlier?
  Maybe this will remove the update installed, and you can again use the WLAN.

  Check it out.

• Satellite L30: Connection to a printer via USB Windows XP

  Hi all

  I'm trying to connect my printer (Brother MFC 9070) to my Satellite L30 and it does not work. Can I use the USB interface to connect the printer to the laptop under XP? I've read that USB can be used to connect the printer to Mac OS, but if not, how should I connect the printer as good old parallel interfaces do not exist on the new mobile no more? Who can help?

  Thank you!
  Dieter

  Hello

  Please check this similar topic about connecting printer parallel to the computer via the USB interface.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=17425

  In this topic, Jeffrey suggested that it s a good idea to test the USB-parallel adapter > before buying because not each adapter will not work.

• Cannot connect my Satellite L20 to AP

  Hello
  I have a satellite L20-214, just bought it and an edimax 7205 ap.
  Both supported the 80211b specifications.
  Access to the AP is completely open!
  But I can't get the laptop to connect.
  He sees the network in the list, but it just cannot connect to it.
  I tried all settings,
  The access point works perfect with smc cards and a few old books.
  I set all the possible settings in the config of Toshiba, disabled the encryption, change the channel to 1 because it is the channel of pref. of the ap and choose 80211b as prim.

  For now, I'll give some further tests before I have to return the laptop to the store because it's brand new.

  But I hope someone has an answer for me.

  [Edited by: admin on 28 May 06 06:28]

  Hello

  Also check if you can find the latest version of the driver for the WiFi card. Also check Intel download page under http://downloadfinder.intel.com/scripts-df-external/Product_Filter.aspx?ProductID=1637&lang=eng

  Good bye