Cannot connect to the BI Publisher after Installation

Similar Questions

• WRT160NL cannot connect to the web interface after firmware update

  I've updated the firmware to unofficial http://mirwifi.org/download/fw/WRT160NL/wrt160nl-0.1.3-pre5.bin and since then I can not connect to the router through the web interface. What can I do? Is it possible to update the firmware to the official without web interface? Thanks in advance for any help.

  The router's default IP address is 192.168.1.1. Try to ping the IP address of the router and check if you get answers from the router.

  Open the Internet browser and in the address bar type http://192.168.1.1. See if you can open the router configuration page.

  If this does not work then you can try to update the official firmware on the router using the TFTP.exe file.

  Disable the firewall on your computer. Connect the computer to the router with the Ethernet cable.

  (1) download the official firmware file from the site Web of Linksys router. Save it to your computer.

  (2) download the tftp site Web of Linksys. Follow this link to search for the file tftp. You'll find downloads for router BEFW11S4. Select the version 3.2 hardware and download the installation wizard. Save it to your computer.

  (3) run the installation wizard. In the server box, type the IP address of your router. In the password box, type the password of the router. Default password for the router is admin. Find the file of the official firmware you have already downloaded and click on upgrade.

  See if it works.

  After upgrading the Firmware on the router, it is recommended that you must reset the router and reconfigure.

  Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 10 seconds. Power cycle the router and reconfigure.

• Cannot connect to Windows Server Core after installation with VMWorkstation

  Yes, I chose not to add the ISO image later and now, I ran the installation a dozen times in all directions.

  Whenever the installation finishes I'm not given the option to enter a password instead, I am presented with an 'Other' account with a password set on it already which is unknown to me.

  Does anyone have this problem before?

  the5thace wrote: whenever the finishing of the installation I am not given the option to enter a password instead, I am presented with an 'Other' account with a password set on it already which is unknown to me.

  Well, when you make a Windows Server 2008 Standard (Server Core Installation) it seems to be quite normal to the «Different user» login  What I did after clicking on 'Another user' I typed in Administrator and no password and then clicked on the round right arrow button on the screen, the next screen has warned "the password must be changed before logging on the first time." and then click OK.  In the next screen, I entered the password and confirm the new password as was then able to connect.

• Cannot connect to the ix2 Lenovo after the 4.1.202.33573 firmware update

  Hello, I've updated firmware for 4.1.202.33573 (the previous was 4.1.106.31982) and after that, I can not connect my Lenovo ix2 using different web browsers. After you type the user name and password and clicking "login" nothing happens for 1 + hour but appears only "processing...". "message on background greyed. After more than an hour of "processing...". "it appears the error message:" impossible (get/read) asked for information "(excuse me risk of errors in the translation of Polish messages in English). After updating firmware also the power and reset buttons stopped working. By pressing or holding the button market / stop has no effect as pressing reset with a PIN. To restart the unit I had to disconnect the power supply and connect again, but also had no effect on connection problems and buttons. Evolution of the browser has no effect. Despite these problems of storage is available - I can connect a network drive, copy files from and to the storage. Is it possible to go back to the previous version of firmware that worked properly for a long time wihout via web interface? -Cordially - Maciek

  Read this post to see if it helps:https://forums.lenovo.com/t5/Lenovo-Network-Storage/Lenovo-iOmega-ix2-Login-and-Printer-problems-aft...

• problems installing vRO 6.0.1 mac osx client.  Unable to connect to the welcome message after installation.

  I can't get the client to install on my mac and I'm running out of ideas as to what is happening.  The 5.5.2 client seems to work very well and if I broadcast the 6.0.1 client that also seems to work.  I can not get the local installation to run.  I always get the message "Unable to connect to host" when I try to run it.  If I go back to the 5.5.2 client it works fine and I can connect to my 5.5.2 instances.

  OSX version 10.10.2

  Version of Java 7 news 75 (at least that's the installer last ran, jdk installed 1.6.0 shows in /System/Library/Java/JavaVirtualMachines)

  I also see this error in the Setup log:

  Install uninstall: vRealize Orchestrator (install all components uninstall)

  Status: ERROR

  Additional notes: ERROR - uninstaller installation Error: java.util.zip.ZipException: error in opening zip file

  Because if this seems not uninstall it app works and I had to manually cancel the installation (which I might be leaving residues).  I manually remove the file .vmware to my directory and also remove ~/Library/Preferences/.com.zerog.registry.xml then by removing the orchestrator in the front applications folder directory to re-launch the client install.

  Paul

  Paul, please file an SR on your side. Feel free to reference the bug I introduced (1409281) when I had the same problem. Customer filed SRs help push resolutions

  -Burke Azbill

• Cannot connect to the development environment after changing the password successfully.

  Hello

  I was the Admin for an APEX (5) tool (hosted by apex.oraclecorp.com).

  I forgot the password.
  So, when I clicked on the change in usual password and received the email. I was able to change the password and when checked in the re-login, it didn't quite work.

  Yet once I clicked on reset password so this time, when I pasted the link to my mail it showed the error below.

  "Session state protection violation: this can be caused by a manual change to a URL containing a checksum or using a link with a missing or incorrect checksum." If you don't know what caused this error, contact the administrator of the application for assistance.

  Contact your application administrator.

  
  

  Since then, I am not able to access the App.

  
  

  No work around for this?

  
  

  Help is very appreciated.

  
  

  Thank you.

  PKMRAO
  

  Hi PKMRAO,

  the password reset link you get in email is specific to the session of the APEX where your asked to reset. When you click on reset the password, leave this window open, is not it not nowhere elsewhere to sail. Wait until you get the mail and then open the link in the same browser.

  Kind regards

  Christian

• Help! Safari cannot connect to the server

  I really need help! I tried to forget the network and turning it back on, I have disabled the firewall and remove all extensions of safari. I seems that nothing works.

  I get the message 'Safari cannot connect to the server' on almost every site except this and facebook. I can't enter same Urbanoutfitters.com or ASOS. I just got the message "Safari could not connect to Server" I'm not a computer genius so hopefully someone here can help me...

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Step 1

  VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

  Step 2

  When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Step 3

  In the LaunchDaemons folder, there may be one or more files with the name of this form:

  com Apple.something.plist

  When something is a random string, without the letters, different in each case.

  Note that the name consists of four words separated by dots. Typical examples are:

  com Apple.builins.plist

  com Apple.cereng.plist

  com Apple.nysgar.plist

  There may be one or more items with a name of the form:

  com.something.plist

  Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

  These names consist of three words separated by dots. Typical examples are:

  com.semifasciaUpd.plist

  com.ubuiling.plist

  Sometimes there are items (usually not more than one) with the name of this form:

  com.something .net - preferences.plist

  This name consists of four words (the third hyphen) separated by periods. Typical example:

  com.jangly .net - preferences.plist

  Drag all items in the basket. You may be prompted for administrator login password.

  Restart the computer and empty the trash.

  Examples of legitimate files located in the same folder:

  com.apple.FinalCutServer.fcsvr_ldsd.plist

  com Apple.Installer.osmessagetracing.plist

  com Apple.Qmaster.qmasterd.plist

  com Apple.aelwriter.plist

  com Apple.SERVERD.plist

  com Tether.plist

  The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

  Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

  If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

  Step 4

  Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  Step 5

  The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

  Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

  Step 6

  This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

• HP Envy 4500: Printer says it has solid network connection, but cannot connect to the internet

  So I have not been able to use my printer wireless lately, so I decided to check if it was connected to my wireless network. It is; I checked, re-connected and checked several times. So I decided to reactivate my web services. I have them turned off, and now whenever I press the button on the printer ePrint, it says connection for a really long time and then displays the message in the sense of "the printer cannot connect to the server. Check the internet connection and proxy settings.

  I have re-connected the printer to my wireless network, I checked that if I use a proxy server (I'm not), I used the HP print and Scan Doctor - just, it won't just matter what I do.

  All I can think about is the fact that I have recently purchsed a new router, but says that its connected which is what really stem me.

  This printer makes me crazy - please help

  Hi @mastersword64,

  Welcome to the HP community!

  I hope you have a pleasant experience with us.

  I want to help you with the connection error, you get on your e-all-in-one of HP ENVY 4500 printer when you try to enable web services.

  Here are some steps, I suggest trying to get your web services up and running it again:

  Network Power Reset:

  We'll leave the router and unplug the power cable (NOTE: do not reset the router.), and then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  Restore the default settings of the network and reconnect:

  1. on the front panel of the printer, press your up wireless icon

  2. Select settings.

  3. Select restore default network settings.

  4 turn on your printer.

  5. once it is initialized to save, press the wireless icon again.

  6. Select settings.

  7. Select Wireless Assistant , and then follow the prompts to enter the details of your wireless network.

  8. try to activate the web services again.

  Configure a manual DNS for your printer:

  1 obtain the IP address of your printer

  a. This can be done by pressing the icon on the printer wireless.

  2. Enter the printer's IP address in a browser on your computer.

  3. Select the tab network at the top of the page.

  4. on the left, select network.

  5. Select network address (IP)

  6. Select manual DNS server

  a. manual Preferred DNS should read 8.8.8.8

  b. alternate DNS server should read. 8.8.4.4

  7. Select apply. You can get a warning simply select OK.

  Please reply to let me know if these steps resolve your issue.

  Good luck!

  

• "Cannot connect to the network." When you enter the correct password for wireless network

  Hello

  I have the HP Photosmart C7200 all-in-One series.

  This seems relatively insignificant compared to some of the problems posted here, but nevertheless it is a problem.  I have a Verizon FiOS (Actiontec) router.  I am trying to connect to it wireless; the network key is using WPA authentication.  I followed all the instructions in the quick start guide.

  My printer detects my network and application authentication key.  I enter the correct key, the printer is trying to establish a connection, but after about 15 to 25 seconds, I get the error message, "cannot connect to the network.  I know that my key is correct; I connect to my router very well through several laptops, PDA, etc.  I have reset the settings network default manufacturer and tried without success.

  I don't know what kind of trouble shooting I'm supposed to do here.  The printer detects the router (albeit low signal strength) whenever I try to connect, I enter the password each time and I get the error each time.

  Your help is greatly appreciated.

  Edit: I printed the test report wireless network, here are the results:

  Radio on   PASS

  The radio work   PASS

  Ethernet cable not plugged in   PASS

  Network name (SSID found)   PASS

  Security   PASS

  The printer settings compatible with the configuration of the wireless router   PASS

  No filtering   IN CASE OF FAILURE

  Connected   Not work

  The signal strength   Very low

  Other networks detected matching you the network name (SSID)   NO.

  I know this sounds strange, but try changing channel by channel 11 of the wireless router.

• Programs cannot connect to the internet, while IE8 and firefox work very well on the internet.

  I used google chrome as my default browser, but one day it stopped working, while firefox and IE always worked / work fine now.  When google chrome no longer works, all my programs stopped to connect to internet, like Skype, itunes, WMP, etc.  The itunes gives error me is "make sure that your network connection is active and try again.  When I download programs through to firefox or IE8, now my default, they download but used to install or connect to the internet (I tried to reinstall chrome after that deletion but it will not be completed).  I was certain this isn't the router or the Internet itself, my wireless works very well to navigate through the Internet and other computers on the network do not have this problem. problem when I connect to other wifi networks.  The help and support center will not be to the point after that I click on it.  I use windows xp sp3 home edition 2002.  I looked through the other threads to see if I can solve the problem, check the exceptions in the firewall, disabling firewalls and other security, running an antispyware/malware, someone suggested (super antispyware), lowered or disabled security settings, but all without success.  I don't know what to do at this point but to restart the system.  Please help, any suggestions?  Thanks in advance.

  Hi unlucky2013,

  Follow the steps from the link below: Windows XP Internet programs cannot connect to the Internet through the connection broadband:http://support.microsoft.com/kb/307164

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows cannot connect to the Internet using HTTP, HTTPS or FTP. __This is probably caused by settings of firewall on this computer. __

  I recently installed the version of Norton, after that I was unable to use the internet, I thought it was the Norton firewall settings. After having playing with her for 30 minutes, I gave up and uninstalled Norton. I have disabled the firewall, I have reset the default settings. Here is the message I get when I run a diagnostic. A crazy thing is that I can connect to internet when I connected to this same computer as a guess.

  Please help me!

  Windows cannot connect to the Internet using HTTP, HTTPS or FTP.
  This is probably caused by the settings of firewall on this computer.

  Check the settings of firewall for the HTTP port (80), HTTPS port (443) and FTP port (21).

  Hi rhonda9937,

  1. what browser you are using to connect to the internet?

  It is not recommended to keep Windows Firewall disabled on the computer.

  This would happen if the ports are not open in the Windows Firewall.

  I suggest that you open ports in Windows Firewall and check if it works.

  How to manually open ports in Internet Connection Firewall in Windows XP

  http://support.Microsoft.com/kb/308127

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  http://support.Microsoft.com/kb/875357

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista problem: "failed to connect to the windows service, Windows cannot connect to the system event.

  I have reported this problem on my PC at home that connects to the internet. My laptop runs Vista Home Premium and I can't connect to the internet. I took my laptop on a trip, tried to connect to the wireless network that was free to the place we are. Could not connect, and after this initial test, the following is displayed after the start of "failed to connect to the Windows Service, Windows cannot connect to the system event notification service. This problem prevents limited users to logon to the system. As administratvie user, you can view the system event log to see why the service did not respond. "(have no idea how or what it means) when I go to the task bar you want to connect to a network, it is said:" the dependency service or group could not start"and if I go ahead and press"connect to a network"it says it can't find.  I search for computers on the network (who I'm sitting next to) and then try to diagnose the problem and it cannot. I have limited knowledge of this type of problem. Anyone have this problem and how to fix it?

  Hi ptkein,

  Thanks for posting your question on the Forums of Windows Vista.

  Option 1: You can download and install the latest network card drivers and see if that can solve the problem.

  Option 2: Follow the link below to fix network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Option 3: Follow the link below to solve Internet connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Option 4: To verify if a third party application is a cause, follow this link (http://windows.microsoft.com/en-us/windows-vista/Advanced-startup-options-including-safe-mode) for this boot to the desktop using the safe mode with networking option and try to install the network. If the problem is resolved, you will need to perform a clean boot by following the steps in the following article to refine the exact source and isolate it: http://support.microsoft.com/kb/929135

  Let me know if it worked.

  Hope it will be useful.

  Thank you and best regards,

  Kadoch - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Help! Setup Wizard cannot connect to the router!

  I tried several times to install this router wireless MO # BEFW11S4.

  I get an error message that Setup Wizard cannot connect to the router!

  I pressed the reset on the back button each time, it is turned off, check the cable connections between the modem cable to the router, then router to the computer.

  After dropping out of the router and connect the PC to the top with the modem, the PC is then connected to the internet once more.

  How to solve problems, or isolate the problem as a bad router?

  Please send me a PM for any suggestions or help.

  Thxx

  (Note to mod: Email address removed.)

  Thank you very much this has helped. You don't mention there was a button "generate" to create the password agorythm code to use as a password.

  Thank you! Problem has been resolved.

• Want 5532: Printer cannot connect to the wireless network

  My desire 5532 impossible to connect to the network wireless after upgrading the firmware on the router. When you use the wireless on the printer configuration wizard, it cannot find the router. When I manually enter the SSID router and the password, it remains impossible to connect. It wasn't a problem before. Any help would be appreciated.

  Thank you

  Scott

  After updating firmware on the router makes you hard reset the router to its factory settings. Then reconfigure the router back to your configuration, do not use any file backup right? If this isn't the case, please do it first to get your fixed router. Reset the printer to the network settings, and then try again.

• cannot connect to the HP laptop.

  cannot connect to the HP laptop. safe mode didn't work or system restore. have windows vista. This error:

  C:\WINDOWS\WinSxS
  \x86_microsoft. Windows.gdiplus_6595b64144ccf1df_1.0.6002.18005_none_9e50b396ca17ae07\gdiplus.dll if the other is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support

  Hi mikiduki,

  I suggest you do the startup repair that may help you resolve the issue.

  Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  Follow the instructions in the link below to perform the Startup Repair.

  Startup Repair: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  You can try to disconnect all external devices on the machine, and then start the computer.
  Sometimes, an external hardware can also cause the issue during the startup process.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP