Cannot connect to the ix2 Lenovo after the 4.1.202.33573 firmware update
Hello, I've updated firmware for 4.1.202.33573 (the previous was 4.1.106.31982) and after that, I can not connect my Lenovo ix2 using different web browsers. After you type the user name and password and clicking "login" nothing happens for 1 + hour but appears only "processing...". "message on background greyed. After more than an hour of "processing...". "it appears the error message:" impossible (get/read) asked for information "(excuse me risk of errors in the translation of Polish messages in English). After updating firmware also the power and reset buttons stopped working. By pressing or holding the button market / stop has no effect as pressing reset with a PIN. To restart the unit I had to disconnect the power supply and connect again, but also had no effect on connection problems and buttons. Evolution of the browser has no effect. Despite these problems of storage is available - I can connect a network drive, copy files from and to the storage. Is it possible to go back to the previous version of firmware that worked properly for a long time wihout via web interface? -Cordially - Maciek
Read this post to see if it helps:https://forums.lenovo.com/t5/Lenovo-Network-Storage/Lenovo-iOmega-ix2-Login-and-Printer-problems-aft...
Tags: Lenovo Products
Similar Questions
-
Firmware 4.1.202.33573 firmware update will not download to IX2 - 10
I kept my IX2-10 update on a regular basis. I downloaded the updated 3 times different, check the MD5 checksum for a full download. But, when I go to download the file to the IX2-10, he says "transformation" returning to the screen "Version 4.1.202.33573 is available" without change. The current version of the firmware is 4.1.114.33421. Any ideas would be greatly appreciated.
Hello IrishEgan,
You can try using another browser to interact with the management pages and apply the update.
If this fails, you can submit a support ticket using the link below, and we can run diagnostics for you:
https://Lenovo-na-en.custhelp.com/app/ask/ -
Help! Safari cannot connect to the server
I really need help! I tried to forget the network and turning it back on, I have disabled the firewall and remove all extensions of safari. I seems that nothing works.
I get the message 'Safari cannot connect to the server' on almost every site except this and facebook. I can't enter same Urbanoutfitters.com or ASOS. I just got the message "Safari could not connect to Server" I'm not a computer genius so hopefully someone here can help me...
You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.
Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.
Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.
Step 1
VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.
Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.
Step 2
When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:
/Library/LaunchDaemons
In the Finder, select
Go ▹ go to the folder...
from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.
A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.
There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.
Step 3
In the LaunchDaemons folder, there may be one or more files with the name of this form:
com Apple.something.plist
When something is a random string, without the letters, different in each case.
Note that the name consists of four words separated by dots. Typical examples are:
com Apple.builins.plist
com Apple.cereng.plist
com Apple.nysgar.plist
There may be one or more items with a name of the form:
com.something.plist
Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.
These names consist of three words separated by dots. Typical examples are:
com.semifasciaUpd.plist
com.ubuiling.plist
Sometimes there are items (usually not more than one) with the name of this form:
com.something .net - preferences.plist
This name consists of four words (the third hyphen) separated by periods. Typical example:
com.jangly .net - preferences.plist
Drag all items in the basket. You may be prompted for administrator login password.
Restart the computer and empty the trash.
Examples of legitimate files located in the same folder:
com.apple.FinalCutServer.fcsvr_ldsd.plist
com Apple.Installer.osmessagetracing.plist
com Apple.Qmaster.qmasterd.plist
com Apple.aelwriter.plist
com Apple.SERVERD.plist
com Tether.plist
The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.
Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.
If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.
If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.
Step 4
Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select
▹ Safari preferences... ▹ General
and click on
Set on the current Page
If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.
The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.
Step 5
The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.
Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.
Step 6
This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.
-
So I have not been able to use my printer wireless lately, so I decided to check if it was connected to my wireless network. It is; I checked, re-connected and checked several times. So I decided to reactivate my web services. I have them turned off, and now whenever I press the button on the printer ePrint, it says connection for a really long time and then displays the message in the sense of "the printer cannot connect to the server. Check the internet connection and proxy settings.
I have re-connected the printer to my wireless network, I checked that if I use a proxy server (I'm not), I used the HP print and Scan Doctor - just, it won't just matter what I do.
All I can think about is the fact that I have recently purchsed a new router, but says that its connected which is what really stem me.
This printer makes me crazy - please help
Hi @mastersword64,
Welcome to the HP community!
I hope you have a pleasant experience with us.
I want to help you with the connection error, you get on your e-all-in-one of HP ENVY 4500 printer when you try to enable web services.
Here are some steps, I suggest trying to get your web services up and running it again:
Network Power Reset:
We'll leave the router and unplug the power cable (NOTE: do not reset the router.), and then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.
Restore the default settings of the network and reconnect:
1. on the front panel of the printer, press your up wireless icon
2. Select settings.
3. Select restore default network settings.
4 turn on your printer.
5. once it is initialized to save, press the wireless icon again.
6. Select settings.
7. Select Wireless Assistant , and then follow the prompts to enter the details of your wireless network.
8. try to activate the web services again.
Configure a manual DNS for your printer:
1 obtain the IP address of your printer
a. This can be done by pressing the icon on the printer wireless.
2. Enter the printer's IP address in a browser on your computer.
3. Select the tab network at the top of the page.
4. on the left, select network.
5. Select network address (IP)
6. Select manual DNS server
a. manual Preferred DNS should read 8.8.8.8
b. alternate DNS server should read. 8.8.4.4
7. Select apply. You can get a warning simply select OK.
Please reply to let me know if these steps resolve your issue.
Good luck!
-
"Cannot connect to the network." When you enter the correct password for wireless network
Hello
I have the HP Photosmart C7200 all-in-One series.
This seems relatively insignificant compared to some of the problems posted here, but nevertheless it is a problem. I have a Verizon FiOS (Actiontec) router. I am trying to connect to it wireless; the network key is using WPA authentication. I followed all the instructions in the quick start guide.
My printer detects my network and application authentication key. I enter the correct key, the printer is trying to establish a connection, but after about 15 to 25 seconds, I get the error message, "cannot connect to the network. I know that my key is correct; I connect to my router very well through several laptops, PDA, etc. I have reset the settings network default manufacturer and tried without success.
I don't know what kind of trouble shooting I'm supposed to do here. The printer detects the router (albeit low signal strength) whenever I try to connect, I enter the password each time and I get the error each time.
Your help is greatly appreciated.
Edit: I printed the test report wireless network, here are the results:
Radio on PASS
The radio work PASS
Ethernet cable not plugged in PASS
Network name (SSID found) PASS
Security PASS
The printer settings compatible with the configuration of the wireless router PASS
No filtering IN CASE OF FAILURE
Connected Not work
The signal strength Very low
Other networks detected matching you the network name (SSID) NO.
I know this sounds strange, but try changing channel by channel 11 of the wireless router.
-
I used google chrome as my default browser, but one day it stopped working, while firefox and IE always worked / work fine now. When google chrome no longer works, all my programs stopped to connect to internet, like Skype, itunes, WMP, etc. The itunes gives error me is "make sure that your network connection is active and try again. When I download programs through to firefox or IE8, now my default, they download but used to install or connect to the internet (I tried to reinstall chrome after that deletion but it will not be completed). I was certain this isn't the router or the Internet itself, my wireless works very well to navigate through the Internet and other computers on the network do not have this problem. problem when I connect to other wifi networks. The help and support center will not be to the point after that I click on it. I use windows xp sp3 home edition 2002. I looked through the other threads to see if I can solve the problem, check the exceptions in the firewall, disabling firewalls and other security, running an antispyware/malware, someone suggested (super antispyware), lowered or disabled security settings, but all without success. I don't know what to do at this point but to restart the system. Please help, any suggestions? Thanks in advance.
Hi unlucky2013,
Follow the steps from the link below: Windows XP Internet programs cannot connect to the Internet through the connection broadband:http://support.microsoft.com/kb/307164
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I recently installed the version of Norton, after that I was unable to use the internet, I thought it was the Norton firewall settings. After having playing with her for 30 minutes, I gave up and uninstalled Norton. I have disabled the firewall, I have reset the default settings. Here is the message I get when I run a diagnostic. A crazy thing is that I can connect to internet when I connected to this same computer as a guess.
Please help me!
Windows cannot connect to the Internet using HTTP, HTTPS or FTP.
This is probably caused by the settings of firewall on this computer.Check the settings of firewall for the HTTP port (80), HTTPS port (443) and FTP port (21).
Hi rhonda9937,
1. what browser you are using to connect to the internet?
It is not recommended to keep Windows Firewall disabled on the computer.
This would happen if the ports are not open in the Windows Firewall.
I suggest that you open ports in Windows Firewall and check if it works.
How to manually open ports in Internet Connection Firewall in Windows XP
http://support.Microsoft.com/kb/308127
Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users
http://support.Microsoft.com/kb/875357
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Hello
I have a Windows XP pro (Lenovo) that I recently ran the recovery and returned to certain configurations of 1.5 years. Now I can't add a network printer and get always the message error «Windows cannot connect to the printer or the name of the printer...» ». I ping the printer and all on my network can add these printers, it's just that a machine that fails to add network printers.
I disabled the firewall, but were still unable to add the printer. Then I found some difficulties to register for a similar problem, but they were not useful... It really becomes a big headache, especially Windows restore does not work...
I strongly suspect that 1.5 years, someone has renamed the printer. Use Windows Explorer to navigate to the print server through My Network Places and see what it's callednow . Otherwise, you could ask your network/system administrator. You should know... Please vote if this has been helpful! Please, click on Brand or propose as answer if that answered your question!
-
I have reported this problem on my PC at home that connects to the internet. My laptop runs Vista Home Premium and I can't connect to the internet. I took my laptop on a trip, tried to connect to the wireless network that was free to the place we are. Could not connect, and after this initial test, the following is displayed after the start of "failed to connect to the Windows Service, Windows cannot connect to the system event notification service. This problem prevents limited users to logon to the system. As administratvie user, you can view the system event log to see why the service did not respond. "(have no idea how or what it means) when I go to the task bar you want to connect to a network, it is said:" the dependency service or group could not start"and if I go ahead and press"connect to a network"it says it can't find. I search for computers on the network (who I'm sitting next to) and then try to diagnose the problem and it cannot. I have limited knowledge of this type of problem. Anyone have this problem and how to fix it?
Hi ptkein,
Thanks for posting your question on the Forums of Windows Vista.
Option 1: You can download and install the latest network card drivers and see if that can solve the problem.
Option 2: Follow the link below to fix network connection problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
Option 3: Follow the link below to solve Internet connection problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems
Option 4: To verify if a third party application is a cause, follow this link (http://windows.microsoft.com/en-us/windows-vista/Advanced-startup-options-including-safe-mode) for this boot to the desktop using the safe mode with networking option and try to install the network. If the problem is resolved, you will need to perform a clean boot by following the steps in the following article to refine the exact source and isolate it: http://support.microsoft.com/kb/929135
Let me know if it worked.
Hope it will be useful.
Thank you and best regards,
Kadoch - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Help! Setup Wizard cannot connect to the router!
I tried several times to install this router wireless MO # BEFW11S4.
I get an error message that Setup Wizard cannot connect to the router!
I pressed the reset on the back button each time, it is turned off, check the cable connections between the modem cable to the router, then router to the computer.
After dropping out of the router and connect the PC to the top with the modem, the PC is then connected to the internet once more.
How to solve problems, or isolate the problem as a bad router?
Please send me a PM for any suggestions or help.
Thxx
(Note to mod: Email address removed.)
Thank you very much this has helped. You don't mention there was a button "generate" to create the password agorythm code to use as a password.
Thank you! Problem has been resolved.
-
Hi all
I'm having a problem with the mobility of the extension and CAD.
UCCX 8.0.2.10000 - 41
8.0.2.40000 - 1 CUCM
CAD 8.0 (2)
Phone: 7945G (configured according to other phones no 'contact center' of society, but not 'line' unaffected - want them purely for Contact Center users to connect to their posts)
When the user logs in the phone itself, there is no question at this point.
When the user goes to sign in CAD, they are presented with the following error:
"You cannot connect because the phone is IPV6. IPv6 compatible phones are not compatible with CAD. »
Workaround is to unlock (settings > * #) Network Configuration on the config of IPV6 phone and physical removal.
Settings > * # > 2 (Network Configuration) > 2 (Configuration IPv6) > button 'more' > 'Clear' button > it presents 'clear IPv6 network settings '.
The user can then successfully connect to the CSA.
The problem is that, after his shift, the user logs on to the phone, then when they log in again, the question is again presented and the 'workaround' to manually remove the IPv6 configuration out of the phone must be done all over again (and each time after that too). Arrrrg.
I also noticed that in CUCM > devices > Device Settings > Commond Device Configuration > find > my CDC > the IP address Mode IS set to "IPV4 and IPV6.
A test, I've changed that to "IPV4" only
User logged off phone, phone rebooted, logged in user, has attempted to connect to CAD, same problem. No change! Ahh some more!
Finally, I discovered an alternative (to avoid the issue and the previous workaround)... CUCM, I put devices > phone > find > select > sub-heading ("phone Configuration') 'Extension Information' >"Logout profile"profile of mobility of users and then we do NOT have the issue. Phone restarted, connected, do not connect you, tried all the different States - everything works fine now.
I also found that by setting up a 'line' on the device - the problem is also solved.
HOWEVER, I don't really want to specify a line configured to the individual if possible phones or mobility of the specific user profile.
Is it possible to avoid this? What Miss me to avoid specifying a line or a profile on your phone?
See you soon,.
Brett
Post edited by: Brett Hanson (in the message original, I've specified only the version 8.0.2 as version - to make this discussion more relevant, I just put in the details of the full versions we ran when the issue was present.) CAD, except that I don't remember what version it was then).
Hi Brett,
I saw something similar once I installed UCCX 8.x to a customer.
Workaround there had to be a SU installed on the UCCX.
If it helps,
Kind regards
Juan
-
Why other computers cannot connect to the internet with my ad - hoc connection?
Hi all! Here's my situation.
My friends router is dead and we are in the smack dab Middle no where with no transport and we want the internet.
We have only an Ethernet however.Here's my situation.
I want to create an ad - hoc network and share the internet connection using ICS. The problem is, when I secure my ad hoc network with WEP or WPA cannot connect to the network. The network is visible on the computers of my friends (mac and PC) and they put the password nothing is done.But here's the kicker, when I don't put no security on the network, everything works fine.
How do I create an ad hoc ICS with security network and have not really work?
Thank you guys!Hello
Thanks for posting. If I understand correctly, you experience the problem with the connection of computers using the Ad - hoc network. Correct me if I'm wrong!
Before I continue, I would like to collect some personal information on the issue.
1. what security software is installed on your computer?
2. share your protected password put on or off?
The sharing tab is not available if you have only a WLAN card.
Method 1:
Follow the link below and set the ad hoc network.
Set up a computer-to-computer (ad hoc) network
http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network
Set up a wireless network without router
Method 2:
After you follow the steps above to set up ICS on the host computer, make the following changes on other computers (but not on the host computer).
(a) open Internet Options by clicking the Start button, clicking Control Panel, clicking network and Internet, and then clicking on Internet Options.
(b) click on the connections tab, and then click never establish a connection.
(c) click on LAN settings.
(d) in the dialog box settings of the network Local (LAN), under automatic configuration, clear the check boxes automatically detect connection settings and use automatic configuration script .
(e) under Proxy Server, clear the use a proxy server for your LAN check box, and then click on OK.
If the password protection sharing is disabled, I suggest to turn on you or so try if this can help fix the problem.
Method 3:
Follow these steps and check if that helps.
(a) click Start, type Control Panel in the search box, press ENTER.
(b) click on network and sharing Center, click change advanced sharing settings in the left pane.
(c) click on him to expand the network profile (type) that you want to turn sharing on or off for protected by Word.
(d) select (dot), turn on password protected sharing.
Visit these links for more idea on the Internet connection sharing between computers connected on an Ad - hoc network:
Set up a shared Internet connection using ICS (Internet Connection Sharing)
Change the settings for ICS (Internet Connection Sharing) Internet
More information on:
Using ICS (Internet Connection Sharing)
http://Windows.Microsoft.com/en-us/Windows7/using-ICS-Internet-connection-sharing
Reply back with the results. I'd be happy to help you further.
-
Original title: printer HP LaserJet 4050 of PCL6 compatible with Windows 7?
I have a desktop windows xp pro (SP3 5.1.2600) and you have a printer HP LaserJet 4050 PCL6. The printer works fine connected to the desktop computer with a parallel port. I'm trying to share the printer on my home network so that Win 7 (6.1.7601 SP1) laptops can use its printing features. Please help.
First I tried to add it with \\hostname\printername that returned this error: windows cannot connect to the printer: operation failed with error 0x000004f1.I downloaded and installed the Win7 drivers on the HP site on my laptop Win7, that has not changed a thing: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=18318&prodTypeId=18972&prodSeriesId=25475&swLang=8&taskId=135&swEnvOID=4063Thanks in advance for any help / support!Hello
1. the two Windows XP, Windows 7 connected in a same workgroup?
2. can you access files shared XP of Windows 7 computer?
3. check if the printer is shared or not?
I suggest you follow these methods and check.
HP LaserJet 4050 PCL6 printer is not compatible with Windows 7. Printer drivers are available for Windows XP-based computers only.
It is not in the Windows 7 Compatibility Center.
I sugegst you contact HP support for Windows 7 drivers, after you instaall drivers to check with the question.
http://WWW8.HP.com/us/en/support-drivers.html
See also: networking computers running different versions of Windows
I hope this helps!
-
Whenever I try to download an app of any kind on the Windows (games, news or social applications) store I get an error message saying it is unable to download or try again later, this happened last week, & it worries me because I am not allowed to download applications. He said: "we cannot connect to the service you need right now. "Check your network connection or try this later. If anyone can solve this problem for me, it would be a great relief.
Original title: Windows Store-downloads
Try the troubleshooting steps below after completing the methods provided by Vinodh.V
Method 1: Make sure that the Date and the time is accurate
Open quick run (Windows key + R)
Type timedate.cpl , and then click OK
Click the Internet time tabClick change settings
Click update now , and then click OK once the time is Sync
Method 2: The problem may be caused by the Proxy settings
If you use a Proxy
Press the Windows key + X to open the Menu power user
Click prompt (admin)
Of that type the below command and press enternetsh winhttp import proxy source = ie
If this does not work, you can reset the proxy settings using below command
netsh winhttp reset proxy
3:Fix Windows Update method
Running Windows Update troubleshooting tool can solve some problems.
Open Control Panel
Click on find and fix problems under system and security in category view (or) click on Troubleshooting if you have large icons or small icons view
Select the fixed problems with Windows update.
Select Next and then click Finish when the process is complete
Method 4: Search for the latest Windows updates
Open quick run (Windows key + R)
Type wuapp , and then click OK
Click check updates
Download and install all pending updates.
Restart the computerMethod 4: perform the Scan SFC
Press the Windows key + X to open the Menu power user
Click prompt (admin)
Type in the command, and then press on enterSFC/scannow
Method 5: Upgrade to the Local account and switch it to the Microsoft account
To switch to local accounts
Press the Windows key + C to open the bar of charms
Click settings
Click change PC settings
Click USERS or accounts
Click on your account
Click Disconnect
Enter the current user password and click Next
Click sign out and finishing
Log on to the user accountTo switch to the Microsoft account
Press the Windows key + C to open the bar of charms
Click settings
Click change PC settings
Click USERS or accounts
Click to connect to a Microsoft account
Enter the current password
Enter the password of the Microsoft account and click Next
Click switch -
VSphere Web Client cannot connect to the server vCenter Single Sign On.
I'm running the virtual appliance of the trial 5.5.0.20400 build 2442330 on ESXi 5.5.0, 2068190
While I try to log on to the Web Client, I get this error. VSphere Web Client cannot connect to the server vCenter Single Sign On.
I put fallow the steps to disable SSO by changing the webclient.properties line add file and ad sso.enabled = false . Then on the vCenter Server Appliance, restart the vSphere client service by typing service vsphere-client restart .
I enclose the reference files.
All ideas will be useful
This answer was simple, all I had to do was remove the # in front of the statement in the file. and SSO has been disabled after the restart of the service.
Maybe you are looking for
-
OfficeJet Pro 8600 Premiun: deleting e-mail in scanning to e-mail option
My scan-to-email address book is full. I need to remove the address that I no longer use. I have not found the option to do so. Any help would be greatly appreciated. Thank you
-
How can I stop a program c ++ running on dosbox
How can I stop a program c ++ running on dosbox
-
VISTA DRIVER DOWNLOADS, BUT WILL NOT ACTUALLY INSTALL...
A few weeks ago, I was on my computer and it will randomly stop. When I tried to turn it back on, it just kept power off. Finally, he gave the option to start Windows normally or start Windows repair. I tried to boot normally, it did not work. My co
-
Space unknown in Documents and Settings
Hi, I do not know if this is normal or not. But it is the case: When I go in Documents and Settings, I put my cursor on my user folder, it shows that it is around 9.66 GB. But then, when I clicked in and highlight everything that it says I use up to
-
How to create the program?
HelloI gave a task to create the program and I have no idea how to create one.Can someone help me with this!Thank youPOOJA