Cannot connect to XP Mode VM

I accidentally named the XP Mode VM the same name as the host computer. I get the message "you are trying to connect to your computer. The requested operation is not allowed. "I tried to connect with just the local admin account and password. I tried to connect with the computername\local admin and the password. I tried to delete the connection information in the settings of PC virtual Windows. None of this has worked. Is there anything else I can try?

Hello

Thanks for posting the question on the Microsoft Community Forums.

According to the description, it looks like you are facing a problem while accessing the Windows XP mode.

The question you posted would be better suited in the TechNet Forums; We recommend that you post your question in the TechNet Forums to get help:

TechNet: http://social.technet.microsoft.com/Forums/en-US/w7itprovirt/threads

In case you have any questions about the Windows operating system, please post on the Microsoft Community Forums and we will be happy to help you.

Tags: Windows

Similar Questions

"PING [ARC2]: Heartbeat cannot connect to standby mode"

Dear Experts,
I have n/w connectivity between two servers. IP is the ping requests.
But primary alert log datbase shows PING [ARC2]: Heartbeat cannot connect to standby mode '
This standby alert log database already mounted.

SYS > select nom_dest, status, type, database_mode, recovery_mode, error, destination, synchronization_status from v$ archive_dest_status where type = 'PHYSICAL ';

STATUS TYPE ERROR DESTINATION SYNCHRONIZATION_STATUS RECOVERY_MODE DATABASE_MODE NOM_DEST

---------------------- ------- -------- ---------------- ------------- ------------------------------------------------ --------------- ----------------------

LOG_ARCHIVE_DEST_2 ERROR PHYSICS FORCE RESCUE IDLE ORA-16058: standby database instance is not mounted stby_crmsdb CHECK the CONFIGURATION

Heartbeat PING [ARC2]: Unable to connect to the day before "stby_crmsdb". The error is 16058.
Sam Oct 31 12:20:12 2015
Errors in the /u01/app/oracle/diag/rdbms/crms/crms/trace/crms_arc2_32417.trc file:
ORA-16058: standby database instance is not mounted
Heartbeat PING [ARC2]: Unable to connect to the day before "stby_crmsdb". The error is 16058.
Sam Oct 31 12:26:16 2015
Errors in the /u01/app/oracle/diag/rdbms/crms/crms/trace/crms_arc2_32417.trc file:
ORA-16058: standby database instance is not mounted
Heartbeat PING [ARC2]: Unable to connect to the day before "stby_crmsdb". The error is 16058.
Sam Oct 31 12:32:18 2015
Errors in the /u01/app/oracle/diag/rdbms/crms/crms/trace/crms_arc2_32417.trc file:
ORA-16058: standby database instance is not mounted
Heartbeat PING [ARC2]: Unable to connect to the day before "stby_crmsdb". The error is 16058.
Sam Oct 31 12:37:20 2015
Errors in the /u01/app/oracle/diag/rdbms/crms/crms/trace/crms_arc2_32417.trc file:
ORA-16058: standby database instance is not mounted
Heartbeat PING [ARC2]: Unable to connect to the day before "stby_crmsdb". The error is 16058.
Sam Oct 31 12:38:31 2015
> > On standby server I delivered after a command. Cloning process is running

$ rman target sys/passwd@CRMSDB auxiliary sys/passwd@STBY_CRMSDB

...

....

> > alert_log ensures msgs
Sam Oct 31 12:07:17 2015
Connections of RFS were rejected
change the basis of mountain rescue
Defined in the converted due to the incompatibility of db_unique_name control file
Change di2dbun of MRC to stbycrms
ARK: START OF THE ARCH PROCESS
Sam Oct 31 12:07:21 2015
Arc0 started with pid = 22, OS id = 7103
Arc0: Started archiving
ARCH: FROM PROCESS ARCH COMPLETE
ARC0: FROM PROCESS ARCH
Sam Oct 31 12:07:22 2015
Mount of redo thread 1, with mount id 1596596917
Physical Standby Database mounted.
Lost write protect mode the "typical" value
..
Sam Oct 31 12:07:22 2015
Arc1 started with pid = 23, OS id = 7105
Completed: alter database mount standby
Sam Oct 31 12:07:22 2015
ARC2 started with pid = 24, OS id = 7107
Arc1: Started archiving
ARC2: Started archiving
Arc1: become the "no FAL' ARCH
Sam Oct 31 12:07:22 2015
ARC3 started with pid = 25, OS id = 7109
ARC2: Become the heartbeat ARCH
ARC3: Started archiving
ARC0: FROM PROCESS ARCH COMPLETE
Sam Oct 31 12:07:24 2015
Using the default for the STANDBY_ARCHIVE_DEST as USE_DB_RECOVERY_FILE_DEST parameter value

> On primary and Stanby (output is even only)

SYS > select thread #, max(sequence#) from v$ archived_log group thread #;

THREAD # MAX(SEQUENCE#)

---------- --------------

1 14452

Your standby database health seems good and is in phase with the primary. Mistakes "hearbeat failed", you've seen, maybe during the RMAN duplication, Eve could have been returned a couple of times, who would have said these errors in the primary alert log file.

-Jonathan Rolland

How can I solve "heartbeat cannot connect to standby mode.

I have a dataguard with this form:
- Name of primary host = TEST IP = 10.4.1.31
- Name of host Standby = used2 IP = 10.4.1.32
---------------------------------------------------------------------------------------------------------------------------------------------
Tnsnames.ora en Primario
tnsnames.ora # Network Configuration file: /u01/app/GRID/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
STD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP) (HOST = 10.4.1.32)(PORT = 1521))
)
(CONNECT_DATA =
(SERVICE_NAME = std_DGB)
)
)
PRUEBA1 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP) (HOST = 10.4.1.31)(PORT = 1521))
)
(CONNECT_DATA =
(SERVICE_NAME = PRUEBA1_DGB)
)
)
---------------------------------------------------------------------------------------------------------------------------------------
Tnsnames pending:
STD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP) (HOST = 10.4.1.32)(PORT = 1521))
)
(CONNECT_DATA =
(SERVICE_NAME = std_DGB)
)
)
PRUEBA1 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP) (HOST = 10.4.1.31)(PORT = 1521))
)
(CONNECT_DATA =
(SERVICE_NAME = PRUEBA1_DGB)
)
)
------------------------------------------------------------------------------------------------------------------------------------
The earpiece on the primary:

Summary of services...
Service 'PRUEBA1_DGB' has 1 instance (s).
"PRUEBA1" instance, status UNKNOWN, has 1 operation for this service...
Service "std" has 1 instance (s).
Instance "std", State LOAN, has 1 operation for this service...
Service 'std_DGB' has 1 instance (s).
Instance "std", State LOAN, has 1 operation for this service...
The command completed successfully
--------------------------------------------------------------------------------------------------------------------------------------
The listener on hold:
Summary of services...
Service "PRUEBA1" has 1 instance (s).
"PRUEBA1" instance, State LOAN, has 1 operation for this service...
Service 'PRUEBA1_DGB' has 1 instance (s).
"PRUEBA1" instance, State LOAN, has 1 operation for this service...
Service 'std_DGB' has 1 instance (s).
Instance 'std', status UNKNOWN, has 1 operation for this service...
The command completed successfully
------------------------------------------------------------------------------------------------------------------------------------
I am able to connect via sqlplus on primary eve and Eve elementary school
-----------------------------------------------------------------------------------------------------------------------------------
I am able to do tnspings between servers
------------------------------------------------------------------------------------------------------------------------------------
DataGuard configuration:
DGMGRL > see Configuring
Configuration - TESTJ10
Protection mode: MaxPerformance
Databases:
prueba1 - primary database
STD - Physical standby database
Fast-Start Failover: DISABLED
The configuration status:
SUCCESS
-------------------------------------------------------------------------------------------------------------------------------------
DataGuard show this error:
DGMGRL > crossing the prueba1
Continue to pass, please wait...
New primary database "prueba1" opens...
The operation requires the start the instance "std" on database "std".
Start the instance 'std '...
Unable to connect to the database
ORA-12545: Connect failed because target host or object does not exist
Failed.
WARNING: You are more connected to ORACLE.
Complete the following steps to complete the digital switchover:
marketing and get the instance "std" of database "std".
-------------------------------------------------------------------------------------------------------------------------------------
Monitoring the log says:
Logging of 1034 errors received on the eve
Heartbeat PING [ARC2]: Unable to connect to the eve "std". The error is 1034.
---------------------------------------------------------------------------------------------------------------------------------------
How I can solve this error, I tried everything but the error persists.
I'd appreciate your help!

Hello;

Generally, it is a question of the name of the host, but given your configuration I would check the firewall first.

Best regards

mseberg

After Malware that my login is disabled cannot start in safe mode

Hi if anyone can help.

A friend tried to watch movies online, I'm not sure of the site they visited, but were asked to install MacKeeper and I believe that they did, as I noticed it was to download and installed the following day and I asked them why they did this and they said it was the only way to watch movies!

Anyway to cut a long story short my friend then called me to say they received a "pop" window to say that my computer has a virus and call a number of 1800... I told them to do nothing certainly not call the number and I would like to sort.

So basically since then that then I can not connect to my main account at the start, the section where you type your password won't let me type into it and there is a symbol of the brand of 'question' next to it. If I hold my mouse over the question mark I get a dialog box stating "Please enter your password to iCloud as... as well as the date. I can only login as a guest and I cannot connect in 'safe' mode by holding down the SHIFT key.

I deleted the MacKeeper Application (and also another OS player application that is newly installed the same day!) and empty the memory cache of my browsers and also now upgraded to 10.11.6

I also run disk utilities, but still I'm getting this problem trying to connect to my main user account!

I think that it is some kind of malware, does anyone have ideas how to solve at least the connection problem?

If I could stamp out to see if there is any malware stuff going on behind the scenes it would be too great!

All suggestions welcome.

Thanks, Ciaran

How did you uninstall the MacKeeper application? Please be as specific as possible, unless you have followed the steps, I suspect that your system has installed to uninstall. If this is the case then you will need to re-install and uninstall immediately by following the instructions of developers. Otherwise, the best thing to do is to do a wipe and installing OS X and then manually install your applications and restore your data from your Time Machine backup.

I'm sure you probably learned to not let this 'friend' enter the 100' of your computer.

Install PT8.53 with Linux problem: unable connect in Bootstrap Mode of Data Mover

People,
Hello. I install PeopleTools 8,53 Internet Architecture. Server database is the database Oracle 11 GR 1 material. Operating system is Oracle Linux 5.
I installed successfully JDK7, WebLogic Tuxedo 11 GR 1 material and PeopleTools 8,53 10.3.6, in Oracle Linux 5.
I've been setting up PeopleTools 8,53 Instance database. Because the Wizard installation problem, I created PeopleTools 8,53 Database Instance PT853 manually. I have run the following scripts:
(1) utlspace.sql
(2) dbowner.sql
(3) psadmin.sql
(4) psroles.sql
(5) connect.sql
Then, we perform Data Mover script in a Windows XP Client computer to fill the PeopleTools PT853 database machine Linux Sever instance. I installed Oracle Database 11 g 2 client for 32-bit Windows XP 64 - bit Windows virtual machine and run it successfully.
In Oracle Linux 5 Server Machine Net Manager:
Service name: PT853
Connection type: default database
"TCP/IP Protocol".
Host: 192.168.196.102
Port: 1521
Listener: LISTENER
Protocol: TCP/IP
Host: 192.168.196.102
Port: 1521
I test the Service PT853 with "SYSADM" username and password "SYSADM". The connection is successful.
In the Windows XP Client computer, the information in the Net Manager is the same as below:
NET Service Name: PT853
Protocol: TCP/IP
The host of the database Machine name: 192.168.196.102
Port: 1521
Name of the Basic Service: PT853
Connection type: default database
I test the connection using 'SYSADM' and it is successful as well. This means that Windows XP database Client can connect with the server database Oracle Linux 5 successfully. But in the computer Windows XP Client, Data Mover cannot connect in Bootstrap Mode using "SYSADM". Its details are below:
Configuration manager:
Type of database: Oracle
The database name: PT853
User ID: SYSADM
Connect ID: people
Connect password: people
Data Mover:
Type of database: Oracle
User ID: SYSADM
Password: SYSADM
When connect in Bootstrap Mode of Data Mover, I got the same error:
ORA - 12154:TNS: can not resolve the connect identifier specified. Invalid user ID and password for the access code.
Based on my understanding, in the Oracle database, the Data Mover Bootstrap mode connection requires a PSDBOWNER table with a 'Database name PT853 and UserID SYSADM' entry.
The problem is that the PSDBOWNER table doesn't have a line after that I run 5 scripts above. I am looking at runs 5 scripts one by one as below:
(1) running the utlspace.sql script creates spaces of table 2 (PSTEMP, PSDEFAULT). This script can not create 2 storage spaces. So, I created 2 tablespaces manually.
(2) running the psdbowner.sql script creates the PSDBOWNER table. This script creates the PSDBOWNER table successfully, but the last line by pressing "connect system/manager", had this error: user not valid Word name and pass. logon denied. I ignore this error and continue the following script.
(3) running the psroles.sql script created the roles PSUSER and PSADMIN. This script runs successfully without error.
(4) running the psadmin.sql script creates ownerID SYSADM and ownerID password SYSADM. When this script runs the last line 'connect system/manager', had this error: user not valid Word name and pass. logon denied. I ignore this error and continue the following script.
(5) running the connect.sql script creates connectID 'people' and connect password "people." This script runs successfully without error.
My questions are:
First of all, in the database Oracle Linux 5 server machine, when I created the instance of database PT853 using DBCA, on the management of the password for the user 'system', I unlocked it and change his password for 'system '. It causes the scripts 'psdbowner.sql' and 'psadmin.sql' got the error "username and password"? If so, how to fix?
Second, after you run 5 scripts above, why there is no line in the table for Data Mover Bootstrap PSDBOWNER to open a session? How to solve this problem?
Thirdly, can I just insert a line 'PT853 SYSADM' into the table PSDBOWNER for Data Mover Bootstrap to open a session?
Thanks in advance.

By default, the password of the population is peop1e.

Once more, you shouldn't do anything 'manually' on the database, scripts do everything for you. Unless something is wrong.

> When this script runs the last line 'connect system/manager', had this error: user not valid Word name and pass. logon denied. I ignore this error and continue the following script.

I really wonder why ignore the error. This meant everything that your system password is not responsible, but something else that you set when creating the database. Never happens to you to check the script before you run it and change it if necessary?

Nicolas.

Cannot connect the macbook pro in normal mode

Cannot connect the macbook pro in normal mode

Are you getting errors?

How do you connect? You use Safe Mode?

What year/model MacBook Pro you are using and what version os OS X are you running?

Cannot connect to Windows XP SP3 because of malicious software, continues to connect then suddenly off. What I can do. Will do the same in Safe Mode.

Cannot connect to Windows XP SP3 because of malicious software, continues to connect then suddenly off. What I can do. Will do the same in Safe Mode.

Hello

If you have another system then plug your HARD drive as a secondary to another system & copy below the files of this machine.

C:\WINDOWS\system32\userinit.exe
C:\WINDOWS\system32\winlogon.exe

Paste these files in the same location in the C drive of the problematic computer.
Search now for your question.

If it won't, then I suggest you to repair your operating system.

Thank you.

Cannot connect to windows - journal of superelevation in safe mode!

It keeps trying to do a system check at startup and will just keep cycling through this. If I don't tell them to run the check, I get in the log on screen and it won't let me type in my password but it does not appear to meet for. on a log in the attempt, that he told me that microsoft shared is damaged or illegible, and run the chkdsk utility - but I cannot connect you to do this. I tried to start in safe mode, but it gets so far under the form /windows/system32/DRIVERS/null.sys and then just seems to freeze. PLEASE HELP ME! Thank you

Hi Bobo Rose,

1. did you of recent changes on the computer?

2 when was the last time it was working fine?

3. you receive an error message during the system check?

I suggest that you run the CHKDSK utility by using the installation CD of Windows XP, which checks the specified drive and repairs or recovers the drive if the drive requires it. The command also marks bad sectors and recovers readable information.

You will need to access the recovery console to run Chkdsk.

You can use the following options:

CHKDSK /p Performs a comprehensive check of the drive and corrects any errors.
CHKDSK /r Locates bad sectors and recovers readable information.

Description of the Windows XP Recovery Console for advanced users

http://support.Microsoft.com/kb/314058

Safari cannot connect to server

Hello. I'm not very good in English please bear with me.

so in fact, there are a few questions here.

1. I use the 2015 macbook, os x version yosemite 10.10.3, safari version 8.0.5. somehow, I couldn't reach several Web sites with safari. I put google.com.my as my homepage, but everytime when I open safari, it says "safari cannot connect to the server.

2. I can not go to websites by typing simply 'youtube.com' as well, https:// will be added. Why?

3. the unwanted tabs sort will pop up randomly, leading me to websites with the url as: ssp.zryydi.com, clkfeed.com, stamplive.com, who would not charge as "safari can't connect to the server.

I looked up solutions online and did things like deleting the history data and the Web site, check for unwanted extensions (there no), change the DNS... none worked. then I downloaded Google Chrome and encountered the same problems, as well. I also tried to upgrade to OS X el capitan, but the App Store seemed unable to "connect to Server" as well. I couldn't update anything. all these problems ensue even when I connect the mac to hotspot instead of wifi.

Thanks to someone patient enough to help me with this

Installed adware may be the problem here.

How to remove adware?

You will have t this after the boot safe mode to prevent

Adware to interfere with the removal of adware.

1 shut down the computer.

Press the power button. As soon as you hear the startup tone,

Press and hold the SHIFT key .

The SHIFT key must be pressed as soon as possible after the start,

but not until the startup sound.

Release the SHIFT key when you see the Apple logo on the screen.

Start-up will take more time than usual.

Flickering screen is normal mode without failure.

Sign in to your account. Launch Safari.

Enter this address https://www.malwarebytes.org/antimalware/mac/

in the address bar of Safari.

Download, install, open, then run it by clicking the "Scan" button to remove the adware.

Once this is done, exit MalwareBytes.

2 safari > Preferences > Extensions

Disable all extensions.

3 safari > Preferences > Search > search engine:

Select your preferred search engine.

4 safari > Preferences > general > homepage:

Set your home page.

5 restart normally in the menu in the  menu bar.

Help! Safari cannot connect to the server

I really need help! I tried to forget the network and turning it back on, I have disabled the firewall and remove all extensions of safari. I seems that nothing works.

I get the message 'Safari cannot connect to the server' on almost every site except this and facebook. I can't enter same Urbanoutfitters.com or ASOS. I just got the message "Safari could not connect to Server" I'm not a computer genius so hopefully someone here can help me...

You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

Step 1

VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

Step 2

When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:
```
/Library/LaunchDaemons
```
In the Finder, select

Go ▹ go to the folder...

from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

Step 3

In the LaunchDaemons folder, there may be one or more files with the name of this form:

com Apple.something.plist

When something is a random string, without the letters, different in each case.

Note that the name consists of four words separated by dots. Typical examples are:

com Apple.builins.plist

com Apple.cereng.plist

com Apple.nysgar.plist

There may be one or more items with a name of the form:

com.something.plist

Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

These names consist of three words separated by dots. Typical examples are:

com.semifasciaUpd.plist

com.ubuiling.plist

Sometimes there are items (usually not more than one) with the name of this form:

com.something .net - preferences.plist

This name consists of four words (the third hyphen) separated by periods. Typical example:

com.jangly .net - preferences.plist

Drag all items in the basket. You may be prompted for administrator login password.

Restart the computer and empty the trash.

Examples of legitimate files located in the same folder:

com.apple.FinalCutServer.fcsvr_ldsd.plist

com Apple.Installer.osmessagetracing.plist

com Apple.Qmaster.qmasterd.plist

com Apple.aelwriter.plist

com Apple.SERVERD.plist

com Tether.plist

The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

Step 4

Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

▹ Safari preferences... ▹ General

and click on

Set on the current Page

If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

Step 5

The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

Step 6

This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

automatic update has made my Firefox Portable browser cannot connect to Web sites, how can I solve this problem?

When the update for my browser took place, on 05-05-14 @ verse 12: 15, it made the browser cannot connect to Web sites. It does not work in safe mode but not in normal mode. I'm on an hp pavilion dv7, running windows 7. I need to solve this problem as soon as POSSIBLE. Or I'll have to switch browsers, I don't want to do, as I have used Firefox for many years. Can I get help to remedy the situation?

Hello, normally these problems are caused by a security/firewall software which does not recognize and therefore blocks the new versions of firefox: solve connection problems to websites after Firefox update

My 8 victory... infected with the virus cannot start in safe mode...

recently, my computer of windows 8 has a virus... (miss click an ad pop up and it's on the computer)

I already got Malewarebytes Anti Maleware and installed AVG, but this virus that bypassed and infected my computer. I tried the standard F8 during startup to go into safe mode and run my anti virus scanners, but apparently it does not work in windows 8. Some say SHIFT F8, that does not work either. Also any other method of setting up safe menu starting boot or mode does not work as it should connect on the desktop to go threw the settings and activate it for the next boot upward. This does not work for me since the virus I have apprently made my fall display driver, after I get my user password to start the desktop computer, so I don't see anything but the pointer of the mouse, everything is black. Y at - it another way to start in safe mode or trigger a recovery system or restore without actually being on the desktop?

Why windows might change?

I already ordered a recovery disk as that seemed to be my only option. But the works of windows 8 way I will NEVER buy a computer with it again. Cannot start in safe mode and can't do the simplest task without being a great test. It's crazy. I thought that windows 8 was supposed to be simple and easy to use!

Please reset your PC. The procedure is given in the link below:

http://support.HP.com/us-en/document/c03546603

If this does not help, recovery of the system to the factory settings. Consult the following document:

http://support.HP.com/us-en/document/c03489643

Satellite C660-1CZ cannot connect to my wireless router

Hello comrades,.

I have a problem to connect to my wireless router.
We have 3 notebooks here at home, and all are able to connect.
But my Toshiba laptop cannot connect. I don't know why...
The latest drivers are installed for RTL8188CE.
I'm sure it's the latest driver from 2011.

My operating system is Windows7.
I bought yesterday and tried everthing to connect with my easybox 802.
I also changed some settings on the router.
Can someone help me pls?

On other laptops, the SSID of the router's Easybox-D77327, but my Toshiba shows just Easybox-D57327.
Its not the same SSID but the router is good.
In my view, the problem is that my laptop shows me a bad SSID of the router, but how to solve the problem...?

You have the same problem when using the AC power mode and battery as well?
Can you connect to the router if WLAN is not secure?

An error message occurs when you try to connect to your router?

Cannot connect to the Family Safety website

I'm sorry if I posted this in the wrong place, but Family Safety does not appear as a product of Windows Essentials...

MOD: It's because he was transferred on Windows forums. I have moved your question to you

Quesiton:

For some reason I can't connect to the Web page for the family (https://familysafety.microsoft.com/) security controls

I see the browser tries to do something, it passes between the two following URLS 3 - 4 times before giving up.

https://Familysafety.Microsoft.com/?WA=wsignin1.0

https://login.live.com/login.SRF?WA=wsignin1.0&rpsnv=12&CT=1408500875&RVER=6.4.6456.0&WP=SAPI&wreply=https:%2f%2Ffamilysafety.Microsoft.com%2f%3Fwa%3Dwsignin1.0&LC=3081&ID=286847

When he does not get the following error message;

"Connect: something was wrong and we cannot connect you right now." "Please try again later".

There is not much other info on the Web page other than an image of laptop with 'your account, our priority '.

I tried to log in security for the family for 24 hours now with the same result every time.

I tried to use the browsers Internet Explorer, Mozilla & Chrome, same result every time. I tried two different places, home and work.

My e-mail and password are correct; I can connect to mail.live.com using the same credentials which, whatever the reason, still works.

Only, I can't access security controls for the family on the Web site.

Anyone have any ideas?

Matthew

Well, I reacted to the error description of the psionic with a known antidote to the symptoms he describes. This is clearly not the solution in this case, I went hunting and found dozens of threads on exactly the same problem. The solution the most common seems to involve logging on http://profile.live.com with the FS username and password, then using the change at the top button on the left to enter your first and last name. If you are already connected to another account, you must do it in a new browser session, for example in mode InPrivate of Internet Explorer.

Cannot connect to internet after Windows updates

When I double click on broadband connection, it won't open after installing windows update

* original title - whenever I have install windows update install but after pc restart I cannot connect to internet__b'coz when I double band click on the connection, it will not open__due for this I have to restore all the updates__please help *.

Hello

1. what operating system do you use?

2 you get an error message while trying to access the internet?

3 what updates did you install?

1. you try to install an update in both clean start state (restart the computer after installing each update) and check the update is causing this issue and send the same return.

Put your boot system helps determine if third-party applications or startup items are causing the problem.

Try the steps instep 1 in the article to put your computer in clean boot mode.
http://support.Microsoft.com/kb/929135

For Windows XP:http://support.microsoft.com/kb/310353

Note: To restore your computer to a Normal startup mode, follow these steps:

a. click on start in the box start the search.

b. type msconfig and press ENTER.

If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.

c. under the general tab, click Normal Startup - load all device drivers and services and then click OK.

d. When you are prompted, click on restart.

Install Windows updates in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

2 please check the items below to solve the problems of internet connectivity.

Why can't I connect to the Internet?
Using the troubleshooter from network in Windows 7
Use Network Troubleshooter event logs to solve network problems

In Windows network connection issues

Thanks and greetings
Umesh P - Microsoft technical support.

Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

Cannot connect to XP Mode VM

Similar Questions

Maybe you are looking for