Error 0X0000007B (inaccessible boot Device) to start.

Similar Questions

• Stop 0x0000007B (inaccessible boot device) on an existing VM Code, not after the conversion of vcenter

  Please forgive any misuse of terminology that I am fairly new to technology - VMware

  I have a VM I created fee-BONES is win2k sp4.  It worked for about a year with no problems.  During the last two weeks, I've created a few additional VM using vcenter to create the P2V. I noticed recently that my original VM that wasn't an import has been planted with the reading blue screen 0x0000007B (inaccessible boot device).  The virtual machine reached the blue screen with the error even after each reboot.

  For fun, I tried to change the bus type of bus to LSI Logic - a reboot always gives the same blue screen when starting upwards. (So I've switched back to logic of bus).  I spent the server ESXi 3.5 in maintenance mode and did a reboot.  No luck again.  Then I tried to start the virtual machine in safe mode - but unfortunately I still get the blue screen and error 0x0000007B.

  Any idea on what I should try next?  Thank you.

  Hi Paul,.

  Welcome to the forums.

  If your virtual machine has worked for a long time, it must be a problem inside the guest OS or a corrupted driver or registry. Be sure to set up the SCSI controller to its original value. You can also have a look at your storage device, in which case there is a bad block on your physical disk.

  If you need to recover data from the virtual machine, you can join his secondary disk to another Windows running as a virtual disk. Otherwise, you can try to reach the installation CD and attempt a repair.

  Good luck.

  Concerning

  Franck

• Quando instalei o windows 8 o erro 0x0000007b inaccessible boot device apareceu o than devo fazer? e essa Carpi ao lado :(

  When I installed windows 8 0x0000007b inaccessible error starting device appeared what should I do? and this guy here following :(

  Here is the Vista Forums.

  Kindly ask in the Windows 8 Forums.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8

  And this is an English language Forum.

  To find the language of your choice please click on the English icon at the bottom of the page and select your language from the Menu that appears.

  See you soon.

• Inaccessible boot device error. New motherboard.

  De : Meigs

  I'm changing my motherboard that supports the quad core processor. However, I get an inaccessible boot device error when I try to boot with the new motherboard. I tried to boot from the installation dvd and repair, but it cannot solve the problem.

  I don't want to perform a new installation. It was easy with WinXP pro. The cd should solve the problem. But, I can just know how to do this with Windows Vista.

  Is there a way to get the registry to look for new drivers? It may not be a big problem since the installation DVD to see the drive with any action on my part.

  From: Rick Rogers

  Hi Meigs,

  Sorry, but change the motherboard in most cases it will take a reinstall. The exception would be a card replacement or one that is very closely related. XP could affect a repair installation, it is not possible in Windows Vista due to changes in the way the operating system is built on the hard drive.

  Moreover, the error message at startup is likely, given that the new motherboard uses a driver different thant previous to load the hard disk.

  --

  Good luck

  Another response of the community of Windows Vista discussion groups

• Satellite on L9W - B Mini - Inaccessible Boot Device

  Hi all

  I installed win10 and decided to do a complete reset that I gave this computer to someone else to use.
  After the reset, it does not start properly and fails with an "inaccessible boot device message".

  I created a USB boot with a version of win8.1 to install, but no touchscreen or keyboard works, so I can't go ahead with the installation.

  someone had this problem? I want to refer to toshiba that I'm tired of this device

  Thank you

  Hi, I installed Windows 10 and reset mine causing this problem, it seems Windows 10 upgrade does not work properly.

  The drivers for the keyboard and touchscreen are not standard, so are not integrated to the version 8/10 bootable usb. You can get a normal usb hub usb microphone and plug in a usb keyboard/mouse to go or if you have created a recovery drive as Toshiba tell you in the instructions it will actually contain the right key drivers.

  To boot from the recovery disc press FN N (F12) as soon as the machine is running and the Toshiba logo shows, and he will give you the option of what to start from.

• 3FO error found no boot device

  Original title: Renabling UEFI Mode error

  Last time I reformatted my PC and disable cause UEFI Mode if I turn it off so I can't format my pc!

  [OS before format: windows 8 pro]
  [OS after format windows 8 pro
  Now after formatting, I tried to solve the UEFi, which disables the traditional way
  and I get error 3FO no boot device found!
  my hard drive works fine!

  Hi Eddie,.

  I suppose that you have an HP computer.  Please see this topic for a possible cause of the failure.

  http://h30434.www3.HP.com/T5/notebook-hardware/my-PC-is-saying-boot-device-not-found-hard-disk-3FO/TD-p/778869

  See also: http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/quot-Hard-Disk-3F0-BootDevice-not-found-quot-Error-Message/td-p/2443931

  Note: Changing the BIOS settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS settings can be solved. Changes to settings are at your own risk.

  I suggest you contact HP support.
  http://WWW8.HP.com/in/en/support.html

  I hope this helps.

• Satellite C650-17Z - only PXE error message no boot device

  Hi people I was wondering if anyone of you kind people out there could help me. I have a Satellite C650-17Z model and when turn on is the message I get:

  + Intel UNDI, PXE - 2.0 (builkd 083) +.
  + Copyright (C) 1977-2000: Intel Corporation.

  + For Atheros PCIE Ethernet Controller v2.0.1.9(12/15/09) +.

  + Check the cable connection! +
  + PXE - MOF: exit Intel PXE ROM. +.
  + No boot device - insert boot disk and press any key.

  Can anyone any sense of the message above?

  Hey Buddy,

  This error message means that an incorrect boot order is set and the computer tries to start between LAN port to the internal HARD disk space. It should therefore go into BIOS setup and change the boot order. Put the HARD drive as the first boot device internal.

  Take a look at this article from Toshiba:
  [PXE error message appears during the clean boot procedure | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=8]

• Satellite L750 - no error at startup boot device

  When you try to start my Satellite L750/755, I get an error no. Bootable Device.

  Before I try any recovery, is it possible to remove the HARD drive and connect it to my other PC so that I can get all my pictures, music, etc. it. If so, do I need.

  I have it on my old desk, and bought a HARD drive with a USB caddy, if disk HARD just looked like an external drive.

  Thank you very much

  Tim

  Yes, you can remove the HARD drive and connect it to your other laptop / PC with USB HDD external enclosure. With the help of this forum you can connect your HARD drive as an external device that must be recognized and listed in the Windows Explorer, so you can have full access to all your stored data.

  Back up all your data and put the HARD drive in your laptop.

  Usually, if there is not a hardware problem you can start your laptop and press F12 to get into the boot menu. When the boot menu appears on the screen that you can put the recovery disk of information optical disk drive, choose the CD/DVD drive and press ENTER. After making this optical drive should start the disc and start to copy the data to the HARD drive.

  What you can do before you start using the recovery disc is to enter the BIOS and set it to default settings.

  Please try it and send feedback.

• How can I fix this error? Available boot device. YOUR 0: Installed; YOUR 1: Installed; YOUR 2: None; YOUR 3: no

  I can't use my desktop pc, because this message appeared when I started my pc since the closure.  Help, please!   I'm not very computer savey.

  The message should look like this:

  No available boot device:

  SATA 0: installed

  SATA 1: installed

  SATA 2: no

  SATA 3: no

  This means that there is a problem with your hard drive. If, in addition, the message is not be displayed correctly, there must be something else wrong with your computer. You will need to bring to a repairman.

• Error message is Boot Device not found, Hard - Disk (3F0)

  Hello!

  I have PC HP Pavilion dv6 with operativ system windows vista Entertaiment. I got an error as Boot Device not found. Please install an operating system on your hard drive. Disk-hard (3F0) Recovery does not work and received the error 100a

  Please help me

  Kamal

  It seems that the hard drive has failed and needs to be replaced. Laptop SATA hard detail can be used. Just be sure to get a quality at least equal the original in order to use recovery disks. It may be big, but not small ability more. For example if you have a 320GB hard drive you can use a 500 GB hard drive but not a hard drive of 250 GB.

• Inaccessible boot device

  restart automatically only in 1 second...

  It worked perfectly yesterday...

  connect my SATA to usb connector, the system disk is not accessible when windows installed...

  F: drive is the system drive and Entertainment Player is his second album (it works perfectly).

  

  But today I was faced with this problem...

  

  Answer Hi,

  Follow the steps to perform a system restore using the installation media:

  (a) once you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.

  (b), select the exact time and the type of keyboard.

  (c) click on repair your computer in the lower left corner.

  (d) select Troubleshooting in choose an option screen.

  (e) click Advanced options in the form of resolution of the problems.

  (f) select System Restore.

  Note: when you use the system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Please let us know about the status of this issue. We will be happy to help you come.

• U530 inaccessible boot device

  My laptop will move after the start-up of the screen always go to the frowny face screen. Help, please.

  I found the hard drive, it is followed by a series of numbers and letters.

• Inspiron One 2320 inaccessible AIO, Windows 10 boot device error,

  I have a Dell All In One 2320. When I tried to install windows 10 throughout the system has stopped working. It is now gives me an error of Inaccessible Boot device. what I can do. It worked fine on windows 7.

  Crackers Holy, how horrible a response. Reference Dell... is this seriously the best you can do?

  Devaux, go here, this is a thread on the support site for Microsoft with a lot of information on how to recover your system and get 10 Windows installed: http://bit.ly/1IkgMgU

  Good luck! I have an Inspiron One 2320 also and I do research on potential problems until I update it.

• I have a hp mini 311-1037nr who recently failed to start. data error is "boot device not found.

  My hp mini 311-1037nr does not start. Its running windows 7 and no changes have been made. Error message is "boot device not found. It will not run a hard drive test, gives "the hard disk does not exist '. Tried not to reset the default settings of the BIOS also no luck. any ideas?

  Drive appears you in the BIOS? If not, and if reinstalling it does not help that I assume safely that the hard disk is dead.

  You can also try to download/creation of the various Linux Live boot floppies [Unbuntu, PartedMagic, etc.] to confirm that your other components are not at fault. If you can start and run a live linux OS then your other components of the system may very well.

  You can also remove the drive of your machine and install it as a secondary drive in another computer or a disk to see if you can access it.

  You can also run a HDD diagnosis by accessing your site of hard drive manufacturers and download/creating a diagnostic boot disk.

• HP laptop: when I start my laptop it will be showing "no boot device."

  When I start my laptop it will be showing "no boot device."

  Hey @Swapvb

  First of all, I want to you welcome to the Forums of HP Support! On the forums, you will find solutions, suggestions and helping hands!

  I understand that you can't your laptop because you do not receive a message from boot device.

  The error message says "Boot Device not found"? If so, please use the Boot Device found not or Hard Drive not detected error document.

  Here, I have provided a list of measures to try with an additional documentation if you need. Please try to:

  • Perform a hard reset
  • Restore the default settings of the BIOS
  • Perform a test equipment
  • Reconnect the hard drive

  If none of the steps above troubleshooting solved the error condition, please make sure that you back up your personal data from your laptop, and then try again to perform a HP system recovery again.

  If the recovery of the system is not yet functioning, please use the document Troubleshooting an HP System Recovery .

  If this answer helped, please use the button accept as a Solution . If you want to give me a five high virtual, please click the Thumbs Up icon below.

  If you need assistance, I would be more than happy to continue to help you. Please re-post with the results of troubleshooting as well as your model number (How can I find my model number or product number?).

  Thanks for joining the community of support HP!

  Have a great day!