Cannot copy mp3 to flash hard disk files

Similar Questions

• Re: Satellite L850 - 0C9 - cannot use USB3.0 external HARD disk

  Hello!

  I am looking for help from you guys
  because I can't use my NEW SEAGATE USB 3.0 drive HARD EXTERNAL 2 to with my labtop (L850 - 0C9)

  My labtop has 2 blue USB ports and I guess it's USB 3.0 and I checked it manual.

  but when I tried to copy data to the hard disk and after 1 minute, then he continues to display the message "the destination you specified does not exist. It happens every time.

  but I found an interesting point of it works fine with usb 2.0 port so now I use with this port.

  It shows that the hard drive is not a problem, but my laptop is in my logic.

  so I've updated almost all drivers and firmware support page vaissaille intel usb 3.0 driver.

  but it is showing the same message as before.

  Anyone know how to solve?

  Have a great Easter party anyway!

  Ran - this disc external HARD of 3.5 inches with own power supply?

• Cannot add again invited in Fusion 7 hard disk file existing (VMDK)

  Hi all

  Since the upgrade to Fusion 7 (and MAC OS 10.10) I can't select an existing VMDK file to add to a newly created virtual machine: all the VMDK files (any directory they are in) are dimmed in the dialog box.

  No idea what is causing this behavior?

  Thank you

  Tim

  Assuming the DescriptorFile hard disk exists s ("Virtual Disk.vmdk" vs binary scopes for example "Virtual Disk - s001.vmdk") with disc type twoGbMaxExtentSparse that only the hard disk DescriptorFile not will be not grayed out when you try to add an existing drive so that the only other thing that comes to mind is permissions.  Normal authorization on the hard files by default is 0600 or - rw - from a Terminal.  BTW, I have no problem adding an existing drive to a computer virtual with VMware Fusion 7.

• How to transfer music from an external hard disk files the reader thumb

  I have my music on my external hard drive and I have a usb input on my car radio (up to 8 GB), but I tried to transfer playlists of hd for the thumb without result. I synchronized in wmp11 but also tried to add files to wmp, but the files on the hard disk are staying to the format of the album and do not appear as they do id they are on my hard disk. is there a post hd USB RIP tab with drag and drop each song in a record high desk then copy of thumb? all the files were on my old computer with windows xp and it was much easier to use it. WTF.

  Hello knottywolf,

  ·         Have you tried to copy the files from the external hard drive to the flash drive?

  ·         What are the type of files that can be played by your car stereo?

  ·         After a synchronization of devices, have you tried to copy the tracks instead copy the playlist?

  If you are not able to transfer the playlist directly from Media Player, you should try to copy the files to your external hard drive from Windows Explorer and paste them to the USB.

  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think

• Location of the bookmarks on an old hardrive that is not Windows, running but the old hard disk files are accessed through another hard drive.

  The old hard disk does not run Windows, so access to the usual file through Windows Explorer or Firefox has not worked for me. The old hard drive is now a slave drive and all files are intact and accessible via the new Windows 7 64-bit operating system.

  You have Windows configured to display the hidden files and folders? If not, do it as soon as the first. http://Windows.Microsoft.com/en-us/Windows/show-hidden-files#show-hidden-files=Windows-7

  Then, what version of Windows do you have on the old drive? Your profile folder must be on the way there:

  Windows XP and earlier versions:

  \Documents and Settings\username\Application Data\Mozilla\Firefox\Profiles
  

  Windows Vista and later:

  \Users\username\AppData\Roaming\Mozilla\Firefox\Profiles
  

  If you find multiple profile folders, see the recent order. You find a subfolder named bookmarkbackups. This article describes how to restore the .json files, you will find: restore bookmarks from a backup or move them to another computer.

  A little luck?

• Satellite A200-137 - cannot install windows after the hard disk crash

  last week my a200-137 crashed and now I have the new hitachi 500 GB hard drive on it, even before the accident.
  I have install with Toshiba recovery DVD windows Vista on it and after succesfull installed I have to start windows, it says prepare for first use windows then I have to wait a while and then I get the message that windows setup is not complete. But it is complete!

  After trying to install 3 times with recovert I tried to install windows xp.
  After a few minutes and transering files, I don't get the message no disc found! It is said that there is no hard drive on the laptop!
  But when I start the start menu or the settings menu, I can see the 500 GB Hitachi hard drive!

  So why windows can't find hard disk and why can't I start windowds visat after installing with the recovery dvd?

  > So why windows can't find hard disk and why can't I start windowds visat after installing with the recovery dvd?
  On this virtual path, it is not easy to say why you can not install recovery image. It would be interesting to know if the same thing will happen when you replace the HARD with the same or identical.
  This title was the original HARD drive?
  If possible, try to get original Microsoft installation disc and check if the HARD drive will be recognized by Vista or Win7 and of course if you will be able to install and boot OS preinstalled.

  Regarding the installation of Windows XP Home edition: it is well known that the WXP installation will start properly due to lack of SATA driver that must be loaded prior to installation of WXP begins.
  Check out this forum and you will find hundreds of threads with detailed explanation why this happen and what can you do about it.

• Run a virtual hard disk file in Virtual PC

  Hello

  I recently got a Windows 7 PC to replace a Windows XP machine. However, while I still have access to anything whatsoever on the old PC that I maybe need even once, I did a .vhd on the old hard drive file.

  I can't open this vhd file, because I can't find a way to create a new virtual PC with which use this virtual hard disk.

  Is anyway to do this?

  Thank you
  Richard

  Windows 7 can read files in VHD(Virtual Hard Disk) without VPC (Virtual PC).  You can make the VHD file be seen as a hard drive on the new PC. Here's how to do it.

  Attach the VHD file:
  1. right click on 'My Computer' and click on 'manage '.
  2. go in "Disk management" under "Storage" on the left side.
  3. click on the 'Action' menu on the top and click on "attach VHD.
  4 locate the hard drive file virtual you want to open, you can also make the drive read only just in case you accidentally change something.  Then click on 'OK '.
  5. you should see your virtual hard drive in "My Computer"
  Detach the VHD file:
  1. go in disk management as described in steps 1 and 2 as I explained earlier.
  2. on the bottom half of the window, find the hard drive virtual you want to detach.
  3 click on the "disk #" and click on "remove VHD.
  Good luck. God bless you. :)

• LR stored on external hard disk files have disappeared or became not related?

  Help: I opened LR to work on some files. The hard drive where the files are stored is attached. LR has always considered all the files it's supposed to. NOW, for some reason, it only sees the files LR upwards until 2014. It does not show me the files, properly installed and already worked on several times. If I go on my external hard drive, I can see all the files after both before 2014. The files are always there hard disk, but it is no longer bound to LR. How and why this happened and how to I fix? Thank you.

  Hi seandt,

  Have you checked in Control Panel from all photographs in the library module and subfolders?
  Are these images not appearing at all in the Lightroom library or they appear with the exclamation points?

  Work in the same catalog that you were earlier?

  Go to the file menu > open recent item > check if you are in the correct catalog.

  Kind regards

  Claes

• How to convert wma to mp3 on external hard drive file

  I have a new version of osxe1 mac 10.11.2 capitan how to convert wma files into mp3 files that are on my external hard drive so my mac can copy on my iTunes

  http://www.mediahuman.com/audio-converter/ - free.  Says it does WMA. I have not used it so try at your own risk...

  Switch (free basic version) - http://www.nch.com.au/switch/index.html - I don't know if this will make WMA

  All2Mp3 - http://download.cnet.com/All2MP3/3000-2140_4-190407.html - limited success with WMA

  Flip4mac - need version payware intermediary that allows you to convert.  Use with Quicktime player.  Flip4Mac - http://dynamic.telestream.net/downloads/download-flip4macwmv.asp?prodid=flip4mac wmv - the free version will allow QuickTime play, but not to convert Windows Media files.

  After installation, a new component of Flip4Mac will appear in system preferences.  Make sure that you set the boxes to make sure that it will play WMV files in Quicktime format.

  VLC - not really a converter but will do a bit on the menu export.  Can be slow to be converted and there will be a learning curve.

  Explore online converters when you download a file in a format and download in another.

  I do not know if your computer can run Audion 3 I think I used to use it to convert WMA.

• How to import MP3s on the hard disk of the computer with windows xp

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I have several CD ROMS that are MP3s of many music albums. I want to know how to import these on my hard drive of the computer so that I can then listen to music with windows media player or import into iTunes

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  If they are MP3 files containing data CDs, you can simply use Windows Explorer to copy the MP3 files from your music collection CD personal. After that, they automatically appear in the WMP library. Tim Baets
  http://www.BM-productions.TK

• Re: Satellite A210 - reinstall external HARD disk files

  I backed up by Satellite A210 files on a Western Digital Passport drive prior to running the Toshiba restore disk. When trying to re - install files I asks me to format the disk in drive d if I do this I lose the data, I have it plugged into a second laptop and it works fine.

  How can I transfer files to my laptop? The two laptops using Vista Home Premium

  Hello

  I'm a little confused about your ad, personally for me it s not clear m.

  If you must run creator of recovery disk Toshiba blank DVDs to create such an environment of recovery. Therefore, you can use an external HARD drive.

• Satellite A300-247 cannot find the folder of HARD disk recovery

  Hello
  I tried to reinstall my Vista home premium on my Satellite A300-247. I have buit - in the OS. I did it axactly according to manual (reboot - F8 - repair your computer-...) When I clicked on Toshiba HDD recovery system recovery tools wrote me this:

  "the recovery of the operating system is impossible
  File recovery HARD drive on the second disc of the first hard drive not found.
  There is no environment recovery valid HARD drive on this computer. "

  I would like to ask what do I do reistall my OS. I have no disk with OS and backup disc creation tool does not work.
  Y at - it an option to get my OS on DVD from Microsoft or Toshiba?
  If I use this tool to reinstall the OS, I will loss all the information on the D drive (Vista is on the C drive)

  Thanks for the reply

  Hello

  Seems that drive HARD recovery does not work.
  Perhaps something has changed on the recovery of HARD drive partition or recovery files has been deleted

  Usually it s always advisable to create a recovery disk in a first time. This should be done at the beginning and this recovery disk is always useful if something would go wrong with drive recovery HARD or with HARD drive

  Now, you can't get the phone because you don t have this drive and the HARD drive does not work

  What to do?
  Well, I think that you would need new control disc.
  You can do so here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Welcome them

• Cannot access the PX1396E external HARD disk

  Just bought this external hard drive 1 TB.
  I Plug and Windows (xp) it detects and installs the drivers, or something.

  When I click on it for the Explorer, it says please insert disk into drive X.
  I plugged on 3 computers in different and same problem.

  I tried looking for specific drivers, but it doesn't seem to be any, not even in the toshiba Web site.
  What's up, anyone know?

  Thank you.

  Hello!

  > but is not recognized PPP
  Can you please explain this? It is unclear to me.

  But if the disc external HARD only on a laptop computer does not contact the other laptop manufacturing. Maybe the chipset driver needs to be updated or it s mainboard issue.

  As floh_1 said, you can try another cable. It s worth a try! ;)

  Good bye

• Satellite A300-1MH - cannot start the eSATA external HARD disk drive

  When I connect eSATA disk HARD Satellite A300 is locked and the HARD drive is not detected. I tried to connect the HARD drive with both eSATA - SATA + USB power cable Cable when it is powered OFF with the same locked A300 result.
  Reloading utility chipset change anything.

  PS. on another computer same portable HARD drive works fine in both previous cases
  Thanks for the attention
  Fabio

  AFAIK, the chipset drivers are responsible for the usb, esata functions but you already reinstalled it. Have you tried to remove the chipset drivers in Device Manager and reinstall again? If still does not solve your problem, it may be the operating system itself. Using the preinstalled operating system or Windows disk?

• HP 15-g019wm: cannot activate windows after a hard disk failure.

  I'm trying to revive a less portable years for a friend after a hard drive... of toshiba drive failure was dead dead.

  A windows 8 sticker bottom so can only assume it is that it came with, but the demands of windows product key stored in the bios has been blocked and will not activate.

  Have you tried 8, 8pro and 8.1 without success.  is it possible that this machine came with the 'Bing' of windows version?

  Owner is not computer savy so can not believe he did anything to change the slic table in bios... same flashed with the latest version of the bios without change.

  After Googling the product key that is displayed 'xky4k-2nrwr-8f6p2-448rf-cryqh"using more than one product key tool, seems its written all over the internet.  What should be on this machine?

  Thanks for any help.

  It needs to be embedded into the BIOS firmware.

  If Windows 8 is more or less operational, try option 5 or 4 of this tutorial:

  http://www.eightforums.com/tutorials/27129-product-key-find-Windows-8-a.html