Cannot create a system repair disk after upgrade Windows 10

Similar Questions

• Satellite U500-10F - creating recovery disk after upgrade Windows 7

  I bought a Satellite U500-10th with Vista OS and I decided to upgrade to Windows 7, so I ordered at Toshiba upgrade disk and installed it.

  * My question is *: * it is possible to create with Windows 7 recovery discs? * in order to avoid the downside to install vista first then do the upgrade to windows 7

  Whenever I need to do a clean install and also to avoid the disadvantage that it is not too recommended to validate windows whenever you perform a clean installation, because the problems of authenticity can emerge with microsoft!

  Thank you

  Hi m.tarek,

  I doubt that this would be possible. First of all, you have ordered only an upgrade, which means that this version can be installed on a pre-installed version of Vista. It is not a full version that you can install without BONES.

  Besides recovering the files on the second partition (btw, that's a picture) contains the Vista operating system and not Windows 7. It does not update.

  Sorry mate, but this is why there will always be this update of s. Alternative, you can create your own image using Acronis True Image or other imaging software.

• ProBook 4540S: 4540S HP cannot access fingerprint reader to login after upgrade windows 10

  Updated for Windows7 professional relatively smoothly. During the upgrade to Windows 10 required an uninstall of the HP tools protect and all files related; I guess it was the program by using the fingerprint reader when I first bought the lap top

  The BIOS is configured to allow the biometric device. Device Manager displays the "Validity Sensor" and is the latest version of the driver 4.5.133.0. Made the change of the parameter of gpedit.msc and went to the Admin tab to allow the use of biometric devices and sign in using biometric devices. I even went to the settings of power and unchecked the biometric cutting attribute as an energy saving

  Under the windows settings 10 for accounts under sign on options, there is no attribute for the biometric recognition and/or face. I added a PIN in the hope that it would seem, but nothing. Windows "Hello" is none existing

  Any help or suggestions appreciated

  Well well after having spend hours with tech support windows, they were able to verify that the pilot of validity that HP hs will not work with windows

  Forums search has found a link to the Lenovo for an updated driver for the device for detection of validity... It is packaged as a Synaptics driver http://support.lenovo.com/us/en/downloads/ds103635

  BTW - Synaptics now has Validity Sensor

  Uninstall all HP drivers in Device Manager

  The FP reader will show eventually as a unklnown device

  Install the pack driver Lenovo Windows 10... computer startup be and the the devive will re - show with the updated driver

  What d you know, now Windows Hello appears in the folder accounts, and you can use your fingerprint reader

  Shame, that we must go to another source instead of HP update their list of drivers

• (Redirected) Old OS disk missing from the hard disk after upgrade windows 10 mSATA (Dell XPS 2710)

  Hoping someone can help me on this issue.

  I installed an mSATA card in my system and installed Windows 10 on the mSATA. I kept my old hdd intact inside, because I wanted to keep my data.

  System starts well and runs 10 windows, BUT the old HDD shows not anywhere on my computer.

  On the computer management screen, it is here and shows healthy. I can't assign a drive letter. Make a right click on the partition does not bring the menu, only the word help. Can't make the system recognizes the disk.

  Someone at - it suggestions? Attached screenshots.

  Thank you

  

  

  

  Hi moonbugs,.

  Please repost this in the software and the operating system, Windows 10 forum help.

  http://en.community.Dell.com/support-forums/software-OS/f/4997

• Reference Dell E520 slow hard disk after upgrade Windows 7

  I recently updated my vista 32 bit to win 7 32 bit e520.  It seems that the drive light is constantly and when you check the performance monitor, the disc rotates 100% for several minutes at a time.  This translates into apps open very slowly, copying the files is slow, etc...

  I'm sure this is related to the SATA controller and its drivers.  I downloaded and installed later for this chipset but also downloaded the vista drivers... nothing works, nor seems to help.  Any suggestions?

  The core of this question was just a bad hard drive I think.  I ran a few tests on the system evaluation and the drive was only writing to approx.  .30 MB/sec... Yes, that's right, less than a MB... I went and bought a new hardrive and everything is good.  I guess the performance against the win7 update was just a coincedence...

• Error code 0xc0aa0204 when creating a system repair disc

  I get an error when I tried to create the system repair disc. The error indicates that the media is upside down, (0XC0AA0204 error code). It is not upside down. How can I solve this problem?

  Hello

  With the publication of the description, I understand that you are getting an error code: 0XC0AA0204 while creating a system repair disk on your Windows 7 computer. I will certainly help you get this fixed number.

  Since the error itself says that there is a problem with the disc. While there might be a possibility of a few scratches on the disc, or it might not be readable by the optical drive.

  I suggest trying to use another drive or you can also try to use this same disc on any computer/computer to diagnose whether or not the problem is with the disc.

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Unable to create point of system restore, System Image & System Repair Disk

  Hello

  I'm on HP Pavilion dv6 notebook, Windows 7 Edition home premium, (Intel core i7, [email protected] Ghz) CPU, RAM (4.00 GB).

  2 days back, I installed kaspersky IPSec 2016.

  After installation of this I started to experience different startup issues as initially I wasn't able to open the application (word, excel) Microsoft, infact I wasn't able to work on any application, even could not shut my system.

  today when I started my system again to check again the question that I was surprised to see that I could access my Microsoft & other applications.

  As a preventive measure, now I want to do system restore, disk image point & system repair disk but unfortunately, I am not able to do this.

  Here are the problems I face to create above.

  1 system restore point - specified error as ' restore point could not be created for the following reason: a volume shadow copy service component has encountered an unexpected error. " Check the event log applications for more information (0 x 80042302)

  2. System Image disc - error indicated as "Windows cannot find device backup on this computer. A volume shadow copy service component has encountered an unexpected error. Check the event log applications for more information (0 x 80042302)

  3 system repair disc - of the errors illustrated as "system repair disc could not be created. The parameter is incorrect. (0 x 80070057).

  Pls advise.

  Thank you for the update from us.

  The message you get may be caused by a corrupted system file. We offer you to perform analysis DISM that can help resolve the corruption of Windows error.

  Let us know how it goes.

  Kind regards.

• HP Touchsmart 23-d055: do I need a new recovery disk after upgrade to Windows 10?

  I upgraded my 2 years, HP Touchsmart in Windows 8 for Windows 8.1 for Windows 10. It took me 6 hours to run all of these updates.

  Now, HP Support Assistant keeps reminding me to create an image of system recovery. But when I run the recovery media creation utility, it warns me that he goes back to the original operating system (Win8). Is it possible to create a recovery image system for my machine on Windows 10?

  I know that Windows 10 now has an automatic recovery partition. But I am concerned by the failure of the disk, which would make this unnecessary partition. Last year, when I've upgraded to win 8.1, I had an alteration of the disc that has occurred without known reason. I lost everything on the PC and to restore Win 8, and I've never touched the PC up to 10 Windows free update is out.

  I created a USB Win8 recovery disk when I got the machine. This is my only alternative? I suppose that if I ran the recovery media creation utility, it would recreate just the same.

  BTW, I know that HP has here a document, but it does on computers provided with Windows installed 10.

  • HP computers - create and use a Microsoft recovery USB drive (Windows 10)
  • http://support.HP.com/us-en/document/c04641788

  Thank you for your help and experience.

  Since no one has replied with an answer to my question, I've finally worked it on my own. I learned that you cannot make a new recovery disk system after the upgrade to Windows 10, if you had already created one when you got your machine under Windows 8.x

  Context: after upgrade to Windows 10, the HP Support Assistant kept prompting me to create a system recovery disk.  I did one when I got the machine 2 years with Win8.  I didn't replace my original recovery disk, so I went out and got a new 16GB USB flash drive. When I inserted this new drive and attempted to create a recovery disk, the PC told me I couldn't do one, because you are allowed to make a recovery disc by PC.

  So it was kind of stupid that after completing the upgrade of Windows 10, HP Support Assistant tells people to do. It should just check itself and see if a disc has already been done. All this anguish for nothing!

• Getting the error "the device reported unexpected or invalid data for a command. (oxC0AA02FF) when you try to create the system repair disc

  original title: error 0xC0AA02FF

  I try to use a "USB" "cruzer" to create a disc repair system, but when I click on this drive to create it I get the following error message:

  "The device reported unexpected or invalid data for a command.  (oxC0AA02FF)

  Hello

  What method did you follow to create the system repair disc?

  I suggest you to create the system with different USB repair disc and check if it helps.

  Means all try the methods and check them off below if it helps.

  Method 1:

  Try to put the computer in a clean boot state, and then check if it helps.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to perform check disk (chkdsk) on the computer and see if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Note: You may lose a small amount of data while performing the check disk.

  I also inform you that the data on the USB key will be lost. You should take a backup.

  You can also check with the reference article below:

  http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

• How many times do I need to do a system repair disk?

  I recently discovered the features to create a system repair disc and an image of the system.

  I think I should create a new image system after installing, for example, some Windows updates.  Yes?

  But how many times I have to create a repair update disc?

  You really need a cd of WinPE recovery or a second to school although flash player is always a good thing that I always do one of each.

  Do the basics with an image utility reliable free system on a completely separate hard disk,

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Macrium-reflect-by-Britec/349cfe40-3481-4F90-a20c-43c9815a2d3b

• Failed to create the system cd disk image backup

  Original title: difference between auomatic backups & do your own backups?

  Hi you all,.

  I'm a bit confused about backups, I just got my new mohterboard HPp6320y/win7/improved / 2.7Gz cpu, 64-bit, 8 G - ram. HP offers to immediately burn a recovery-re-boot disk, which I did. Then they strongly suggest to copy a restore disc fictitious system using an external hardrive or external storage such as cd - rw disks, I don't understand if I can burn a shadow of system using my existing internal drive or some other form of storage like USB drives provided that they have sufficient capacity.
  So far, so good, but when I first tried to burn a shadow/system using my existing built in internal disk drive, the only choice in the context menu after clicking "burn the backup of the system" was my internal hardrvie. He did not get a disk, so I dropped back until I could understand if I was doing something wrong and fix it
  I know that my automatic HP backup restore points are made on a regular basis with or without me having to ask, once partition it the space reserved for different backups with full capacity, my system removes the oldest to give room for the new, correct?
  I also know that the purpose of having a shadow system is if your hard drive goes wrong, you can restore your entire OS & the personal data to a new disk, so store in a partition of your works currently hardrive would make no sense if it goes wrong, correct?
  Then why, my system will not burn a shadow on a freshly unpacked well-known R/W disk? (I have 10 of them I bought still packed)
  Do I need to use a drive external remote disc?
  Also, I have a factory built-in removable Pocket media player provided out of my older HPa610n and it holds 160Gs, I have the appropriate connection and it appears therefore as a storage device when I turn on my new current HP. However, when I click Backup a shadow system, it shows that my cd player internal existing as an option where I'm supposed to store my shadow of system. Yet they claim that I can use a USB device, provided that it can contain enough storage, I am really confused and feel a migraine coming!
  
  
  Help!      Please... sincerely, boulonman

  Hi Alan,

  Welcome to the Microsoft community!

  You cannot create a system image backup using the disk drive.

  To help you better, we need more information.

  You use CDs or DVDs?

  If you need any help or if you encounter problems with Windows in the future, let us know and we would be happy to help you.

• Laptop HP Pavilion G6: after upgrade windows 10 - cannot detect wireless network

  Hello

  I upgraded my computer windows 10 laptop and it cannot detect a network.   The network adapters that appear in the Device Manager - controller Realtek PCI FE and Qualcomm-Atheros 802.11 AR9485 wifi adapter but I can't see any network.   I tried to install several drivers for Atheros without success.   I went back to windows 8.1 and network drivers works, I have upgraded to windows 10 back and I can't connect to wireless networks. I tried to update the drivers without success, uninstall and reinstall without success, I have alos tried the solution published on the microsoft unsuccessfully Web site: https://support.microsoft.com/en-us/kb/3084164

  I get an error message saying "the system was unable to find the key to register specified or the value '. '" I didn't install any software VPN or another, is there a solution to my problem?

  Hi there @tikaro23,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I understand that you have a problem with your Wi - Fi on the laptop HP Pavilion G6. You mentioned that you can't detect a wireless network.

  I did some research and found a great document for you called HP PC - troubleshooting wireless network and Internet.

  What happened with you have attempted to use the resolution of the problems mentioned in the link you so much?

  Have you tried to restore the BIOS?

  Have you tried to connect directly to the Modem/Router?

  Have you tried to boot mode safe?

  You can maneuver in Mode safe without problem?

  In my research, I also found a Support Forum on the page called Microsoft Community after upgrading Windows 8.1 for Windows 10, no wireless networks are available.

  There is a post of RajithR. Read his message in its entirety. (I also provided it below.)

  

  You said you tried to uninstall the driver. Are - what you got to do it in the order shown below?

  • Uninstall the driver of network card in Device Manager,
  • Reboot the laptop twice,
  • Reinstall the driver.

  Please use the HP Support Assistant, it will help with the software and drivers on your system at the time of purchase or this update of need.

  I know you said you tried to update the driver also. Have you tried to do it in the Device Manager in the order given below?

  • In the Device Manager
  • Click the network adapters to expand
  • Right-click on the network adapter family
  • Select software update of the driver
  • Choose search for automatically updating driver software.
  • Once the installation is complete, restart your laptop.

  Please follow the troubleshooting steps above and the re-post with the results, information from the above questions and HP Pavilion G6 Notebook PC model number.

  Thank you!

• Failed to create the system repair disc receiving error code 0 x 80070057

  Original title: System repair

  When I try to create a system repair disc it gives me a message "the parameter is incorrect (0 x 80070057) '. In the same area every time I try to make a back-up, I get a message telling me the back-up was done, but without some missing files?

  No help available?

  Ray

  Hello Ray,

  Thank you for your response.

  I appreciate your time and your efforts.

  Please refer to the suggestions of Sharkbyter replied on 18 May 2011 and check the issue.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/unable-to-create-a-system-repair-disc-0x80070057/66b208a9-CD48-447C-98C3-e59f3553c842

  Note: The use of third-party software and links, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software and links can be resolved. The use of links and third-party software is at your own risk.

  I hope this helps.

  Thank you

• How to create a password reset disk after password forgotten?

  * Original title: password reset disk

  How to create a password reset disk after password forgotten?

  Nope, used another computer to download password software that worked! Thank you're your answer even if it was wrong.

• "After effects WARNING: cannot create file library/preferences/Adobe/After Effects/13.2/dummy. ???

  The error message I recibed. Please help me

  After effects WARNING: cannot create file library/preferences/Adobe/After Effects/13.2/dummy

  fix the permissions problem that prevents starting applications Adobe | After the effects of interest area