Cannot customize windows server 2008 and CentOS 6 comments
Hello
I test on vCloud Director 1.5 and I have foud the problem about customize windows server 2008 and CentOS 6 comments. I can't add additional NIC in my VM and "Enable customizing the comments" checkbox is gray out. Y at - it someone than ever in the face of this problem, please help.
Thank you
Charles Edward
It is important to ensure that you are closing the vApp and not the virtual machine under the vApp. If you just stop the virtual machine, you will get the behavior you describe.
Tags: VMware
Similar Questions
-
I have an ASP application developed with Interdev 6.0; part of .NET and using the time to design Windows server 2000 controls.
I need to upgrade the application to run on Windows server 2008 and IIS 7.0 ASP. I find some compatibility problems.
The part that I'm stuck at the moment is the creation of objects in the runtime that gives an error.
: "800a01ad" VBScript runtime error
Component ActiveX cannot create objectCode:
Set OF = Server.CreateObject ("DERuntime.DERuntime")
Application("de") = OF. Load (Server.MapPath ("overall. (ASA"),"_private/DataEnvironment/DataEnvironment.asa")The MSDERUN. DLL is properly registered on the server with the correct permissions.
What are the possible solutions outside the upgrade of all of the ASP.net project. ?
Post in the Windows Server Forums:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/ -
Manually download the update for Windows Server 2008 and Windows Vista platform
Where can I manually download and install Update for Windows Server 2008 and Windows Vista platform?
I have a machine that requires this update for installation of PowerPivot for Excel 2010, but the Windows updates are usually hunted in the world by our headquarters and I can not run it manually.
Platform for Windows Server 2008 and Windows Vista updates are only available via Windows Update (or WSUS, in your case). Contact your IT Department. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Hello
I have an internal modem on my pc that is running windows server 2008, and I want to make a connection. Not a connection to an ISP, but to a mac. I want to transfer data via phone ports, have two computers without being connected to the outside world.
Thank you
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
I would like to know how to install Windows Server 2008 and Windows 7 Enterprise from a USB key, please.
I'm not trying to run either on the USB key, I just need to know how to install from a USB key. I tried Multiboot, grub for DOS and other, but they do not seem to work :/
I am going through a book that uses these two to form Microsoft MCITP: Server 2008 Administrator and if I could install these Via USB, this would save my records and a lot of hassle... basically just for convenience, as everything that I need will be on a stick * lol *.
Otherwise, I'll have to use discs instead :)
Take a look at this:
http://www.Haiders.NET/post/installing-Windows-Server-2008-from-a-USB-Flash-pen-drive.aspx
Like to make a bootable USB with WIndows 7, take a look to use the following:
Download Windows 7 USB/DVD tool
-
I have a virtual machine in Windows Server 2008 R2 Enterprise. I want to change the logon screen. Obviously Public of Stardock LogonStudio can be installed on Windows Server 2008, but it cannot change the login screen.
Hello
The question you have posted is related to the server and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.
http://www.Microsoft.com/windowsserver2008/en/us/forums-blogs.aspx -
Windows Server 2008 and CHM files
HR 7, HTML
Accompaniment of the victim has a customer you are trying to view .chm files in Windows Server 2008. They went ahead and tried the registry fix from the 'normal' to view chm on a network files, but that does not solve the issue.
My understanding is that chm files cannot be seen at all in Windows Server, but thought I would check - is it possible to view chm files in Windows Server 2008?
Thank you
-Jeff
Jeff,
I don't think that something has changed in Windows 2008 and .chm files are certainly visible in this version of Windows. However, it may be that the customer needs to tinker with the security settings in Internet Explorer to make the visible distance .chm files. See this article for more details:
http://weblog.helpware.NET/?p=50
To ensure that correct registry changes are made, the customer could try making them with free HHReg utility. It is available here:
http://www.EC-software.com/products_hhreg.html
Pete
-
Number of concurrent connections to remote desktop on Windows Server 2008 and 2012
Dear,
Can someone help me with what is the maximum number of concurrent connections on Windows Server 2008 (Standard & Enterprise) and Windows Server 2012 as well.
Kind regards
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
What is the difference between windows server 2008 and windows server 2012?
I'd be grateful if someone could give a comparative perspective of the two products.
Hello LSAKR,
Microsoft Communities is for consumer issues with Windows 8, Windows 7, Windows Vista and Windows XP. Your question about Windows Server would be better treated in the TechNet for Windows Server forums.
Click here to transfer your question in the general Windows Server 2008 forum.
Sincerely,
Marilyn
-
Pavilion p6110t CTO Desktop: drivers for Windows Server 2008 and HARD drive problems
Recently, I had the hard drive with my OS failure. After replacing the hard drive and reinstall windows server 2008, I seem to have encountered some problems with drivers. After insalling Windows, I had 3 items in my device manager that not have installed correctly. I could get the driver for the LAN port to work, but I did not get the driver to "Standard VGA Graphics Adapter" and "SM Bus controller". After a little research, I believe that the graphics card is a Radeon HD4350. With this information, I still have been unable to toinstlal the correct drivers or the other of these elements. I tried several drivers listed on the support page of the drivers on the HP website, but all fo return them the same error of not finding the right operating system. The link to the driver, I used initially on my previous installation seems is no longer valid.
Also, I can't access two additoinal hard disks (sata connected). They were used with the previous installation of windows without any problem. They appear in the Device Manager but do not show in my computer. A removable disk appears that I don't know what it is. Previously I used the software to mirror one of the disks on the other in order to avoid the loss of data if a disk fails. Is one of the above players with not be able to access the drives causing the problem or the software used before the problem?
Any help on these questions is greatly appreciated.
Ok.
I can't help you with the readers then. It is out of my area of knowledge. If they are healthy and active in the disk management utility, then that's all that I know these should be reported.
As for the graphics drivers...
Download and install this free utility for files.
After installing 7 - zip, right-click on the graphic driver file and select 7 - zip from the list of options.
Choose 7-zip to extract to: and leave it to unzip the file in a folder. I have it extracted the file name of the file.
Then just follow the rest of my instructions to install the driver.
Of course that you you first go to where 7 - zip extract the folder and continue from there.
-
Clustering Windows Server 2008 and the STORport driver
Hi all
I recently read on the documentation for "Setup for Microsoft Clustering and Microsoft Cluster Service". It says to use the LSI Logic STORport drivers with Windows Server 2008 clustering, instead of SCSIport drivers. I can't find the STORport drivers anywhere. I can't find this on the LSI Logic's Web site.
TIA
-Rick
See the site of LSI:
http://www.LSI.com/storage_home/products_home/host_bus_adapters/scsi_hbas/lsi20320r/index.html
André
-
How the mirror system and boot partition (RAID1) in Windows Server 2008 and SATA disks
looking to make a Windows Server 2008 to a desktop computer that meets all the requirements of Server 2008.
I have 2 hard drives SATA 2 to identical installed. No RAID controller.
Is this possible?
Hello
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads
-
evaluation period of windows server 2008 and sql server 2008 r2 on a few 10 users?
can I get an evaluation period for windows server 2008 standard or sql server 2008 r2 standard for on some 10 users for 1-2 months?
Hello
You can find the Server forums on TechNet support, please create a new post at the following link:
http://social.technet.Microsoft.com/forums/en/category/WindowsServer/
-
Windows Server 2008 and see VM
HI - y at - it something special to take account when you try to use Windows server 2008 standard R2 as guest OS custom as a virtual machine in a server connection pool? I installed the agent, but the connection to the server says "Waiting for agent. However, I can connect using a pool of Terminal Server services.
Thank you very much
I'm not good at these, i suggest to create another topic with relevant header would make it more visible for the rest at the entrance...
-
How to connect to my server windows server 2008 and make my computer a workstation?
I got a new windows 7 computer pro to replace my old windows xp computer. I used the Windows easy transfer tool to move files from my old computer to the new. The old computer is still connected at the moment. I named the computer of the same name and the same password. I did an upgrade from xp to windows 7 on another computer, and it seems to work very well using the same process. It connected automatically to the server. I really want to do when the computer is just a workstation on the network, and anyone can sign any name and password. How can I do?
It seems that your computer is currently connected to a domain. If it is used in a business environment, you do not have the privilege of setting upward as you wish using the mode of working group due to the policies implemented by the network administrator.
If you have the option of logging to a local account, it's how you do it:
Type: MACHINE NAME\Username
then enter your password.
How to find the name of your computer:
Click Start, right click on computer
Click on properties
Go to the section name parameters, by domain and workgroup of the computer
Maybe you are looking for
-
Preferences of Safari does not work
Hello I have read several replies to other posts on how to set a homepage in Safari. I have Safari 9.0.1. iOS El Capitan 10.11.1 Safari-Preferences translates no response at all. The Preferences dialog box does not come to the top. Nothing. An
-
Satellite P200 - 17 c - I want to install Windows 7 64 bit
Hello I use Toshiba P200 - 17 c (PSPB6E) and were broadcast on the public beta of Windows 7 32 bit because it had been released a few months earlier, but I am surely informed Windows 7 64 bit is the way to go, so I would like to give it a try when th
-
HP 15-ac122tu: want a blu ray for my hp 15-ac122tu driver
I inserted a blu - ray disc in my laptop but it is not read it... I realized that I need to install a driver for blu ray on my hp 15-ac122tu plse help how to download and from where?
-
I don't have enough space to defragment my c or d ' training. What can I do
my c drive has next to no space left in memory and I can't defragment, because the amount of free space is less than 15%. He'll start deframent then say that he may not continue for any reason any. Ive tried to delete the unwanted/unnessissary prgram
-
I have these small yellow or gold (according to the colors of your screen) padlock superimposed on some of my icons on my desktop and visible when you use Windows Explorer and would would like to know how what they are, and how I can remove them.