Cannot delete network homegroup sharing

Similar Questions

• Cannot delete files from sharing

  I have a ReadyNas Duo performer 5.3.11 v2

  I have a folder that I use for saved documents. Now I am unable to delete all the files and folders in this directory. I spent in actions and reset the permissions. This has not fixed the problem. I have no user or security on the NAS.

  I noticed that there is a Beta from 2013. That would solve this problem? Or y at - it another way to fix this?

  Short answer: I had to go out for a few hours and now it works. I don't know why it broke, and now I don't know why it started working. I did reset on sharing permissions and restarted the NAS server. Maybe he had to make a pass to reset each queue (?).

  But you're just StephenB, good fishing. HTTP has been activated as a service, but not for sharing.

  He now happily deleting files 11 693. Thanks for your help.

• My computer is on a network, but Windows 7 (Pro x 64) shows that it is not. Cannot change network location to home. Cannot use the homegroup.

  I'm putting my network (with homegroup) home, but when I go into control panel > network and Internet > homegroup, it says:

  "This computer cannot connect to a homegroup." Then,

  "To create or join a homegroup, network location of your computer must be on home."

  Okay so. I go to network and sharing Center and click on "connect to a network" and I get a box in the lower right corner that says "no connection available.

  I find that strange, because when I click on 'My Computer', I see in the left pane all the computers in my house under 'Network'... so I'm in network... but I'm not?

  It is a problem because until I am able to add this computer, I am unable to share the data on this computer and it is my office alone AND the pc is connected to my router.

  I can not access my storage drive. I can't stream media.

  All opinions are appreciated. Thank you.

  Hello

  Check the Device Manager for the entry of valid card of the wire.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

  Turn off the computer and the router, reset the router and the computer.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  It still does not work, try this too.

  Firewall software.

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall Windows Firewall should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly, or uninstall it completely allowing the clean flow of traffic on the local network. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Reset the network stacks .

  Type Cmd in the search text box.

  Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type netsh winsock reset at the command prompt and press the Enter key.

  Do the same process to refresh the TCP/IP, just replace the command typed with.

  netsh int ip reset

  Restart the computer.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Cannot find network shared printer

  to change printers and now with vista laptop can't find shared printer (with xp) - no problem with gettng online

  You guarantee that the file and printer sharing is enabled in xp and vista? Have you try mapping IP is either the computer/laptop by which the printer is connected to? Have BTW you installed the printer drivers? Under network and sharing Center check it out and see if you are able to see the two pc or laptop? Also make sure there there is no third-party firewall if, either set it up or have it uninstall

• Cannot turn off or disable password protected sharing the network and sharing Center

  I'm trying to turn some pretty simple sharing of files between our windows PC (two portable minicomputers running under XP, a desk and a laptop running vista). File sharing functions between the XP computers. However, I am simply unable to influence the "password protected sharing setting" in the network and sharing Center. I check the option to turn it off and I get a click through UAC dialog window, the mouse cursor turns for a short time while as if windows is pretending to do something, but the password protected sharing setting is always on.

  I tried to disable Avira Antivir.

  I enabled the guest account and set its password to a string explicitly empty with net user guest «»

  Nothing helps.

  svampi,
  This knowledge base article can be useful for you.  Although the problem that it is designed for the difficulty is not the same as yours, the underlying cause is the same.  There is an article to 'fix', which means that you can click the 'fix' in the article so that it automatically fixed for you online or you can follow the instructions to edit the registry yourself if you feel capable of doing that.  So check that out and see if it helps with your problem:

  http://support.Microsoft.com/kb/947232

  Let us know if this can help, or if you still need help.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot change network type in Windows 8

  How can I change a network or private so that file sharing is allowed? I thought that you could click on it from pop to subwindow network on the right side of the screen, but only my physical network connection is listed.

  More details:

  I have a physical Ethernet connection which is defined as a private network. Sharing files and any other communication on my LAN works fine. I also have a virtual connection through LogMeIn Hamachi which is defined as a public network. I can't find a way to change this. How to change network type in Windows 7 does not work in Windows 8.

  Once, I was able to change the type of Ethernet from the public to the private network by selecting that I wanted to turn on sharing. Although now I cannot access the menu to change that pop on the pane by clicking on the icon of simple network. I was also able to do it once with the Hamachi network, but only the physical card network seemed to save the change after a while. At a time the network Hamachi was not identified, but he has switched back to show as a public network. That's if everything goes though temporary and can be another problem together.

  I don't want to make an exception in my firewall, or make registry changes that specify all unidentified networks are established privately (two suggestions I found on the web so far).

  So it took me a while to find this also, I fixed it by searching for troubleshooting as suggested above. In troubleshooting search box (top right) type homegroup, and then select the resolution of the problems of the residential group, even if you're not using home group, part of the diagnosis allows you to change the type of network from public to private/home, I jumped the diagnostic network also step and allowed me to very easily change the type of network.

• Cannot delete history

  Have all tried and cannot delete my story I am on a network computer under my own username

  For problems with the file places.sqlite (bookmarks, historical) database, you can check in the Firefox profile folder.

  • Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/

  If the extension of Maintenance of places cannot repair the database places.sqlite file remove all places.sqlite files in the Firefox profile folder to rebuild the database places.sqlite latest JSON Firefox backup in the folder bookmarkbackups.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

• reconnect the stall network of shared network variables

  I have a cRIO unit communicates with a laptop using shared network Variables, one of them being a table of 21 index which is buffered.

  The system connects and communicates very well, but sometimes the wireless laptop card is to lose the signal from the WAP, attached to the cRIO.

  In this case the network never shared Variables "reconnect" and start to receive values still once the wireless link is restored.  Is this expected behavior?

  When I tried to use other WAP industry instead of the card laptop wireless, I get no abandonment.

  Hello Ryan,

  Please contact National Instruments!  I looked into the problem you are having and I wanted to ask you a few questions more.  First of all, you have a period of time which allows the reconnection?  I believe that the Shared Variables should find the connection after a short period, but it may not be a very quick process.  It may take a few minutes to the Variables shared to reconnect.

  The other thing that could happen is if you have error son being passed by shared Variables, it is possible that the error is not be deleted, and so he will always see the error and not a so never reconnect.  In this case, you will need to filter this error and then clear the error in order to use again shared variables.

  If you have more specific information about your program that can help us to determine the reason for this behavior.  As a screenshot of your code would be useful.  Please let me know if you have any other questions and I'll be happy to help you.  I hope this helps!

• Cannot delete files from the Recycle Bin

  Hello

  I'm unable to access my trash, everythime I click on the folder, it says windows Explorer has a problem, then said restarting windows.

  And the window just closes, it is there anyway to delete the files from the trash bin other than to go to the folder it self.

  See you soon

  Serrano

  Here is an article on how to repair a trash corrupted in Vista: http://www.vistax64.com/tutorials/131294-recycle-bin-corrupted-cannot-delete-file-folder.html.

  It restarts if you left or do a right-click on the icon or both?  Here are a few ways to empty it by using two methods:

  1. On the desktop, right-click on the Recycle Bin.
  2. Then click the Empty trash to empty its contents.
  3. You will be asked if you are sure that before it permanently deletes the files.
  4. If you're absolutely sure, then click Yes to clear the contents of the Recycle Bin.
  5. Alternatively, you can double-click the Recycle Bin to open and examine its contents.
  6. And then on the file menu, click empty the Recycle Bin.
  7. After confirmation, Windows Vista will be empty all files from the Recycle Bin.

  Go to control panel / customization / Desktop Icons and remove the trash, click OK and close.  Then go back and add the trash.  See if the new basket has the same problem.

  Here is a program that you download that adds a command to empty the trash to the command line if all that you need to do is type of the command in the box search now and it will happen. http://itsvista.com/2007/01/itsvista-tip-23-empty-vistas-recycle-bin-from-the-command-line/.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot delete a file 'empty '.

  I recently downloaded a file and thought I had deleted. However, I managed to create a 0 byte file that appears on my desktop, appears in the file dir / x of order invites and still cannot be moved, renamed, or deleted. Windows reports, "failed to find this article. It is no longer in... ».

  My problem is similar to the "cannot delete illustrates file listed in the file Explorer Vista - does not exist?" thread. I tried several of the steps used in this situation, as the use of a third party file removal tool (KillBox) and also get into the command prompt and try Rd (filename) to remove. I also tried to use e/s (filename), but he kept reporting that "the directory name is incorrect.

  This file is also not protected, and I am logged on as administrator. Any thoughts?

  Hello MrMichael,

  Thank you for using Microsoft Vista answers Forum!

  Try to start your PC in safe mode by following the steps below and see if you can delete that folder/file from there.

  How to start in safe MODE

  1. Restart your computer if it is running.
  2. Press the F8 key after your computer powers initially.
  3. Once you see the menu Advanced Startup Options , you can stop tapping.
  4. Up/down arrow keys to highlight your selection.
  5. Select Safe Mode with network and press enter.
  6. You should see loading drivers and then Please wait.
  7. You should then be on the Welcome screen.

  Connect to your computer using an account with administrator privileges.

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• Profile deleted network-, but my computer thinks it still exists and I can't connect to the network at all.

  I had problems connecting to my wireless home network.  It always gave me the error that the network stored on my computer (relevant for my home network) profile did not have the correct network settings.  I couldn't find a way to solve the problem, so I just deleted the profile, in the hope that in trying to reconnect, my computer would automatically detect the appropriate settings.

  Now when I try to connect, I always gives me the same error (that the relevant profile has bad network settings) even if the profile has been deleted.  My computer asks me if I want to open the network profile to check its settings.  If I hit Yes, I gives me another error (because there is in fact no longer the profile).

  I'm running Vista Basic and I have problems connecting to other networks (without thread or hard line).

  Any help is greatly appreciated, thank you-

  Hello

  First of all, make sure that if there's Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Also, make sure firewall No. preventing / blocks wireless components to join the network.

  Look at the wireless management screen, and then remove the entry from your wireless network.

  http://www.ezlan.NET/Vista/wireless_manager.jpg (Control Panel, network and sharing Center. Upper-left click Manage wireless networks.

  After the form of own connection, wireless tray bar icon.

  Given that your wireless network is more in the preferred list, it will prompt for the password. Put the password that is current, and if all goes well it will connect.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Windows Vista connected online but not shown on network and sharing Center or on the taskbar, leads to other problems

  I have a Dell Inspiron 1520 running on Windows Vista, my router modem is a Motorola SURFboard SBG901. A few months ago on this computer, I couldn't see that I was connected online either from right down icon in my taskbar (it shows just two monitors with an 'x', that when you highlight on he says "not connected, you are currently not connected to any network.")  I don't see it on my network and sharing Center which States: "not connected wireless connections are available." In terms of network it shows that my PC and then the line that has an x on him. If you click the x, or select diagnose and repair, he informs me that all is going well with my computer. If I go to connect to a wireless network, it shows that I'm connected to my network ready. I open one of my browsers and they all work very well, I can access any site without problem. I was not embarrassed with him at the time, but since then I moved into a new House and have a new service and everything, with this motorola modem cable. my new wireless network is a network unsecured, which of course, I want to fix it. I can connect to this network, but I can't access it through Windows properties to make sure. I read the manual of the modem, telling me to connect through an ethernet connection and access configuration manager using the ip address of my router on a browser, but which does not charge or the other. I have other devices (Ipod Touch and PS3) wireless I got other people come computers and they all detect the network but cannot connect to it. Thanks for any help.

  Hello
   
   
  I would like to ask you a few more things.
  1. how many network connections you have created?
  2. are there multiple NICs installed on the computer?
   
   
  Since this is a common problem and many users have solved this problem by using different methods.
   
  This can also occur if you frequently use several type of internet connections such as dial-up, Ethernet and LAN.
   
  As the article below also indicates that there could be multiple reasons for the same.
  The network adapter icon incorrectly displays a red "X" in the window management in Windows Vista network connections when the network adapter is connected
  http://support.Microsoft.com/kb/945925
   
   
  Method 1.
  I ask you to remove any network connection if you have created and then check.
   
   
  Method 2.
  For control please check in mode safe mode with Networking if the problem exists.
  Here's how:

  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to boot mode safe mode of Windows 7 with networking.
  e. when Windows starts, use check and Internet explore if the problem persists.

  For more information, see the articles below.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Troubleshooting in safe mode
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode
   
   
  I hope this helps.
   

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• try to print from my Win7 x 64 laptop over the network (homegroup or workgroup) to an enslaved Dell Photo AIO Printer 926

  I'm trying to print from my Win7 x 64 laptop over the network (homegroup or workgroup) to an enslaved Dell Photo AIO Printer 926.  When I look for the computer on the laptop, I find, it seems to be fine, but when I print a job, the print job is in the queue on the laptop and does not send the job to the desktop printer.  I had it once before but a relocation removed.  I'm not sure why I see the desktop of my laptop printer but cannot get it working again.

  Any advice?  Thank you

  You need the Windows7 x 64 drivers for the printer (and perhaps software and fimware) installed on your laptop to be able to print using the printer on another computer if he uses another operating system...  Maybe when you reinstalled you forgot to install these things.  Try this and see if you can then print.

  If this does not help, please post in the Forums Windows7; http://social.answers.Microsoft.com/forums/en-us/category/Windows7 where Windows7 experts will be happy to help you.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot delete a file in a folder that I can see his name in the list of directories

  Help

  I can't delete a file that I can see in a folder and a list of directories of files.

  The name of the file is "000" without visible extension.  Don't know if there is a hidden extension, but it isn't.

  I went into the same folder using the "Command prompt" window

  However, to enumerate the files in the command prompt window, the file name is not visible, but the forlder report indicates that there is a file whose size is 15 bytes.

  The file is not readable in a normal DOS window or text editor, which means that a file such as 'Crimson Editor' Editor opens the file, but there is no visible ASCII character.

  How can I delete this file?

  It is a virus, and if so, how can I delete?

  Best regards, Roy

  Try using one of the following free products to remove the file.  Assassin http://www.malwarebytes.org/fileassassin.php of files (with or without forcing the deletion: http://www.mydigitallife.info/2008/12/27/force-delete-cannot-delete-locked-or-in-used-files-or-folders-with-fileassassin/) or Unlocker to: http://www.softpedia.com/get/System/System-Miscellaneous/Unlocker.shtml.  These programs often work when normal functions remove Vista not work correctly.

  I hope this helps.

  Good luck!

  Lorien - a - MCSE/MCSA/network + / A +.

• error windows cannot configure network adhoc connection? win7home premium

  in network and sharing Center I select new connection > network configuration ad-hoc (computer to count) name network and fill all boxes and press enter then I get windows error could not set up 'network name' I adapter.plz wireless brodcome802.11g give me a solution a solution.thanks perfect

  Hello

  1. when exactly do you get this error message?

  2. have there been recent changes to the computer before the show?

  I suggest you to see link and check if it helps.

  Error message when you try to connect to an ad-hoc connection Windows 7 or Windows Vista: "Windows cannot connect to ": http://support.microsoft.com/kb/946481

  More information: Set up a computer-to-computer (ad hoc) network: http://windows.microsoft.com/en-US/windows7/Set-up-a-computer-to-computer-ad-hoc-network

  Hope this information is useful.