Cannot depend on firewall Windows or updates.

Similar Questions

• Cannot depend on firewall or automatic updates

  The firewall is disabled, and automatic updates so keep trying to do what the pop ups saying but nothing is.

  Hello

  You can not turn on the Windows Firewall and automatic updates in Windows XP.

  1. What is the exact message of pop-up you get?

  2 have had any changes made to the computer before the show?

  Please follow the methods and check if it works very well.

  Method 1:

  Follow the steps in the link.

  You cannot enable or disable the Windows Firewall setting on a Windows XP Service Pack 2

  http://support.Microsoft.com/kb/914230/en-us

  Method 2:

  Follow the steps in the link.

  You can not turn on automatic updates on a Windows XP Service Pack 2 computer

  http://support.Microsoft.com/kb/916261/en-us

   

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Cannot change the boot options. cannot depend on a windows Defender

  Cannot change the boot options. error message says "Windows Defender is disabled". cannot depend on windows Defender.

  If you use Norton, McAfee, AVG, MSE etc., they will be either disable or conflict with the Defender.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/threads

  For questions of security program, kindly ask in the Security Forum.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot start the Firewall window 13 error code

  Hello world!

  I use Win 7 32 bit

  When I try to start the Windows Firewall, I got the message: ' Windows didn't start the Windows Firewall on the Local computer. " For more information, see the system event log. "If he is a non-Microsoft service, contact the service vendor and refer to the service error code 13 special.

  I don't know how to solve this prolem.

  I need your help!

  Thank you!

  Hi the Trieu,

  1. are you under any domain active?
  2. are you a third party security/firewall on your computer?
    
  If Yes, then you may not be able to start Windows Firewall, since you have a 3rd group of firewall installed.

  Even if you can re-enable the Windows Firewall, you should not run two firewalls at the same time.

  Step 1:

  I suggest to uninstall any third-party firewall installed on your computer and check if the problem is resolved.

  Reference:

  Uninstall or change a program in windows.
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Step 2:

  Try the following steps:

  a. right click on command prompt (start Menu\Programs\Accessories) and choose Run as administrator. Type (or copy and paste) the following command:

  WinMgmt /verifyrepository

  b. If the system returns 'referential WMI does not match', type this command:

  WinMgmt /salvagerepository

  The first time you run this command, it will fail. (It will be matter of commands to stop services causing his failure, saying: "a shutdown command was sent to a service that depend on other services running on"). It might take a few minutes for the services to stop. Rerun the last command. You may in fact need to run 3 times before finally runs and ends on its own.

  c. once the command is executed, you can determine if the problem is resolved.

  Step 3:

  You can also use Event Viewer to search for information on the problem.

  Reference:

  The display of the error messages in the event viewer
  http://support.Microsoft.com/kb/947321

  You can check for more information about this at the time where it appeared and post this information here to help us narrow down where the focus.

  See also:

  Enable or disable Windows Firewall
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Step 4:

  I suggest you check for these dependency services.

  You should have these services began in the services window.

  -Remote Procedure Call (RPC)
  -DCOM Server process Launcher
  -RPC end point mapper
  -Windows Management Instrumentation
  -Remote Procedure Call (RPC)
  -DCOM Server process Launcher
  -RPC end point mapper
         
   
        

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• 403 cannot access my professional window xp updates

  I can't get my updates, because when I run the update, it doesn't return 403 no access

  Hi jakcofall77,

  Read the following article about your error:

  http://support.Microsoft.com/kb/245142

  I hope this helps!

• Cannot depend on protection against analog copying to the output device so I need to install an updated version.

  original title: I had windows xp and I've upgraded to windows 7 and he said: he cannot depend on protection against analog copying to the output device so I need to install an updated version.

  can you help me please

  Hello

  Thanks for posting your query in the Microsoft Community.

  The problem you are experiencing is not clear. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

  Please answer these questions-

  (1) what is the exact error message?

  (2) when you get this error?

  (3) what exactly you are trying to do?

  (4) that you get an error code?

  (5) did you do changes on the computer before the show?

  I would like more information about the issue.

  Method-

  I would have you look at the article-

  Suggestions for a question on the help forums

  http://support.Microsoft.com/kb/555375

  Do get back to us and let us know. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

  Thank you.

• Windows Firewall resets after updates

  Hello

  We are a company who install a server client internally developed software. Our software requires certain Exceptions to the firewall Windows must be configured. But we would like the situation that sometimes, after the updates of Windows, our clients call us with the problems caused by the firewall, and sometimes we found the reset default exceptions. Is there anyway to prevent this as well on the environments that are the Working Group and based?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Cannot get windows or windows Defender Update

  I get the same error codes & I tried all the solutions suggested to update but none worked.  for the windows defender update I get error code 0 x 80240022 for microsoft update I get the 8024402C error code

  0x8024402C error code when you try to install updates on Microsoft Update or Windows Update Web sites
  http://support.Microsoft.com/kb/900936

  Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• The Windows Firewall, Defender and updates among other things aren't working properly, a message that sqlite.dll is missing

  I suspect a virus, but I already checked with, Avira, Avast, Malware Bytes, killer TDSS, Norton and Mc Caffe

  Original title: my computer firewall windows defender Center action and the site Web of the Microsoft and Apple do not work as well as Windows update and Windows keeps giving me a message missing sqlite.dll?

  Hi, a G account,.

  You have recently uninstalled software?

  Reinstall and see if the problem persists.  If this is not the case, look for a tool to uninstall on the manufacturer site to uninstall again if you do not use.

  http://www.SQLite.org/download.html

  Start in safe mode and run a full scan to ensure the malware has not invaded your system.

  Restart and start typing the F8 key

  Select Mode safe mode with networking

  Download the following and run a full scan

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=16

  Causes of sqlite.dll errors:
  1. a sqlite.dll is removed when a program has been uninstalled.
  2. when a program has been installed, a sqlite.dll was crushed and replaced with an older version or a version that is not compatible with other programs.
  3. an installation fails a program.
  4 equipment failure issues arise.
  5. your computer is infected with the virus that deleted an express sqlite.dll

  6. invalid or damaged sqlite.dll entries in the Windows registry.

• Error - because of unidentified problem, Windows cannot display the firewall settings

  Original title: Firewall Windows are not accessible to stop?

  Recently installed MSE.  Now, I can't launch Samsung Allshare to view files on the Samsung TV.  Firewall Windows is not accessible to stop temporarily so that Allshare can run.  All that is shown is "Because of problem not identified, Windows cannot display the firewall settings."  It seems that MSE has hidden and I can't determine how to communicate with them without going through the process of uninstalling and re-installing.

  Hello

  1 Windows operating system you are using?

  2. when exactly you get the error message?

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up the registry, see the link:

  Back up the registry

  http://support.Microsoft.com/kb/322756

  See the article and check if that helps:

  You cannot start the Windows Firewall service in Windows XP SP2

  http://support.Microsoft.com/kb/920074

  If the problem is not resolved, please provide more information to help you best.

• Firewall Windows disable the Internet Explorer loads Up after slow start after the installation of Windows updates

  Hello, (this the mystery of on and Off and back on Windows Firewall with slow loading of programs like Internet Explorer as this all is pass it on firewall, disable the firewall, the firewall, it occurs only during starts, after he fine / but very annoying on reboots whom he accuses of my computer down) / listed below is the cause of it , and when she first started, you have a solution?

  I recently installed the last 16 (High Profile) updates to security, for most security updates and updates from net framework as well as the removal of malware for windows XP tool.

  After installing these updates, now my Windows Firewall turns off during 'Boot Up' on all restarts. If I try to load Internet Explorer, it will also not load up to minutes serveral / while this happens... That's fine, then finally my firewall itself loads Up quickly turns to Internet Explorer and back on during this time around the same time.

  After these updates these things are happening on my computer now, it's as if there is a process running, but nothing run any virus, Trojan or worm etc just these updates caused this problem. I don't know if it updates is corrupt or not, but have tried different things as system file checker /scan etc with no luck.

  (1) computer boots to the top and seems to Load Up Fine ' until the ' or 'Look at this' but isn't, something is running in the background or process "wing unstalled" is obviously "unhooked", etc..

  2) try to load Internet Explorer last minutes and is very slow to load up, even if I 'don't load Internet Explorer' must still a long while that as in the firewall turn off for awhile some several «minutes» (way too long), before "auto turn on automatically return.

  (3) turns firewall Windows itself on "finally" as Internet Explorer finally loads upwards as well the two Internet Explorer is able to load 'definitely' and the firewall is on "finally" as many minutes later as listed above, at the same time.

  This could be the cause? Only, it has begun to 'After' I ran windows update and installed the 'most recently high security updates for windows XP' there were 16 listed mainly security updates and updates of net framework as well as the software removal tool windows malware.

  That's all that is changed on my system, I tried many things, nothing seems to fix this problem with my computer. I know for a fact that these updates are the cause, but am not sure that you caused it? Or how do to solve this problem, any sugguestions would be appreciated.

  Please answer questions following diagnosis by number in your very next answer (no need to quote this post):

  1. what application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  2 a Norton or McAfee application already installed on the computer?

  3. do you have a Norton or McAfee free trial come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  4. you are using IE6, IE7 or IE8?

  5. have you ALREADY had the opportunity to do a Repair Installation of Windows XP for some reason any?

  PS: PLEASE DO NOT START ANYTHING IN ADDITION TO NEW THREADS ABOUT IT!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• "An undentified problem, windows cannot display the firewall settings" during a turn on the firewall.

  Original title:

  Windows firewall error desabaled

  I have windows xp - help mechanic iolo - my firewall is deactivated automatically - when I click on activate up to a mistake pop [there was a firewall of windows activation error] and then I click on the top of the pop - windows firewall - Open button error [due to an undentified problem, windows cannot display the firewall settings].

  my firewall won't come to help me.

  Hello
  1. You did changes to the computer before the show?
  2. What service pack is installed on the computer?
  Method 1:
  You can run the fixit from following link and check the issue:
  Diagnose and automatically fix problems of Windows Firewall service
  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us
  Method 2:
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up the registry, see the link:

  Back up the registry

  http://support.Microsoft.com/kb/322756

  See the article and check if that helps:

  You cannot start the Windows Firewall service in Windows XP SP2

  http://support.Microsoft.com/kb/920074
  
  

  Let us know if it helps!

• Removed the Trojan.Dropper.PE4 and now windows cannot display the firewall settings.

  XP SP3.  MalwareBytes removed Trojan.Dropper.PE4 today.  Now, "due to an unidentified problem, windows cannot display the firewall settings".  I've also scanned with SuperAntiSyware and Spybot.  Also, when I open Windows Explorer, Control Panel, etc. the display settings have changed.  Help, please.

  Hello
  Try the sequence of steps 1 and 2 in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide
  It provides simple instructions on how to remove malware from a computer. If you have any questions, just ask. I hope this helps you.
  Brian

• Cannot install Windows XP update KB2718704; error # 0x800A138F

  Cannot install Windows XP update KB2718704; Get error # 0x800A138F. I would appreciate a mention of help on this issue. Thank you.

  (My Automatic Updates usually work, but this time not to go.) Updates are obtained through IE8 browser, but I prefer FireFox for daily use.)

  Thank you! Success!

  I used method 2, because I had already tried method 1 earlier, but the "fix it" went wrong. After reading the information from method 2, I opted to use my FireFox instead of IE8 browser, because I suspected that the process Internet Explorer that are included with the update was a large part of the cause of my problem. Among the options, I used Microsoft Download center to locate the update I needed and then through its validation and finally made the download and reboot. Voila!

  Can you please explain why the process more automated via IE did not work for me? Why I resorted to the labour process more that I used? Can I expect this of all the other "critical" updates that I get on my machine Windows XP Media Center Edition 2005? Maybe your answers would also be interesting to others.

• Why did after downloading Windows security updates that Windows Firewall starts immediately after opening?

  Why did after downloading Windows security updates that Windows Firewall starts immediately after the connection?   This is happening with my PC and netbook, I almost hesitate to download the safety of dates in the future

  Hello

  1. What is the security update article?
  2. are there any other security software installed on your computer?

  If you have any third-party security software installed on your computer, I suggest you to disable the security software and then check if it helps.

  Note : If you need to temporarily disable the security software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  See also:

  The firewall service Windows in Windows XP Service Pack 2, in the edition of Windows XP Professional x 64, Windows Server 2003 SP1 and x 64 of Windows Server 2003 versions may not start if the DCOM Process Launcher Service is disabled: http://support.microsoft.com/kb/892504

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users: http://support.microsoft.com/kb/875357