Cannot download the magnet links using windows 8

Similar Questions

• Cannot download the security updates in windows xp

  Windows XP issue - I have several times notice that security updates are available, but after going through the movements SEVERAL times, always the message automatic updates that "some updates could not be installed".  All seem to be updated for security and there is a list of about 5 or 6 of them.  Frustrated...

  Hi RoseRosey,

  ·         Provide updates failed number of KB.

  ·         What is the error message you received the update failed?

  Follow the suggestions below for a possible solution:

  Step 1: To get the error message code or error of update failed, you can check the update history in sight. Follow the steps below:

  a. click Start, in the search box, type in Update

  b. click on windows Update

  c. click view update history

  d. If a double failure click the update has failed to get the error code and error message.

  Step 2: Install the stand-alone package containing the updates. You can download the stand-alone version of the link with the KB number below:

  http://www.Microsoft.com/downloads and check if the problem is resolved.

  Hope this information helps.

• Pavilion G6-2244sa: cannot download the network drivers for windows 7

  Bought my laptop at home about 3 years that came with windows 8. I've replaced the operating system with windows 7 that I hated the feel of windows 8. Everything was fine until this year, when my internal hard drive is gone. I replaced with a new drive hard and loading the new windows 7. Must connect to the internet so that I can get all the latest drivers for the laptop. I am able to connect via an ethernate cable but unable to connect via wifi. I tried to download the latest drivers for this model but can't download drivers for windows 8.

  How to find the right drivers for windows 7. My warranty ran out last year. As this portable windows 8 is there a chance that I could upgrade to windows 10. I'm not savvy computer as I often to ask my co-worker or my COMPUTER service assistance.

  Concerning

  Richard73

  You're welcome, Richard.

  Here is the driver for the wireless card you need...

  This package contains the installation package driver for wireless LAN Qualcomm Atheros AR9000 controller series in the laptop models running a supported operating system.

  File name: sp61411.exe

• Cannot download the language packs on Windows 7 Ultimate.

  I got a computer with Windows 7 Ultimate so I could download the language packs, but I can't seem to bring with it no more.  The directions say to go to Windows Update, I did and that would be a statement in there about it.  There was no instructions, so I downloaded every update available.  Still no statement.  What I am doing wrong?  Thank you.

  Thank you.  I had already done all that.  In fact, several times.  However, I repeated again and then rebooted the computer and repeated once again.  This time, Windows Update found more than updated.  After that, he continued to find updates whenever I want to install some and reboot until it finds another 49 updates more.  These updates included language packs.

  Thanks for me direction in the right direction.  I guess I'm just not patient enough.

• Cannot download the purchased EBook using the ADE

  Hello, I bought an EBook on the internet today, and this Ebook required ADE. So I downloaded ADE and allowed my computer too after creating my ID Adobe (which I also used to log in this forum.

  The problem is that even if my payment has been processed and the sellers website which brings me to a download page when I right click to DOWNLOAD it gives me the option to save the file on my computer. However, when I save the file it is not the Ebook that is saved. Instead, there is a file named 'URLLink' file Type is 'ADOBE CONTENT SERVER MESSAGE '. When I right click on this file, it gives me the opportunity to OPEN WITH ADE. When I select this option, I get the following error message:

  License get error
  Server communication problem: E_ADEPT_IO

  I have not changed my CLOCK time. Also, I disabled my Firewall.

  But still can't download. The seller tells me that they are unable to refund my money since the problem is with my computer!

  Any suggestions or ideas? Help, please. Thank you.

  If you able to download content from Adobe sample library, but not from the library that you bought, and then unfortunately your best bet will be to contact the Bookstore (I say unfortunately, because although I hope that wrong, I feel the beginning of a run around you).

• Reinstalled Windows XP HOME SP2 and cannot download the appropriate components to upgrade my software to SP3! Suggestions?

  Reinstalled Windows XP HOME SP2 and cannot download the appropriate components to upgrade my software to SP3! Suggestions? It seems that microsoft Web sites send me in circles. Patches do not work either.

  Hello
   
  1. What is the error code / message that displayed when you try to install updates for your Windows Xp Service pack 2 computer?
   
  2. What are the steps of troubleshooting that you already tried?
   
  Please follow the links below to solve the problem.
   
  Method 1
   
  Step 1
   
  Steps to take before you install Windows XP Service Pack 3
   
  http://support.Microsoft.com/kb/950717
   
  Step 2
   
  Cannot install Windows updates
   
  http://support.Microsoft.com/kb/555461
   
  see, http://support.microsoft.com/kb/906602
   
  Method 2
   
  If you still face problems, please start your computer in a clean boot to avoid conflicts with security and third-party software conflicts and try to install updates.
   
  How to configure Windows XP to start in a "clean boot" State
  
  http://support.Microsoft.com/kb/929135
   
  Note: Follow the steps to configure Windows to use a normal startup state of the article mentioned above to start the computer in normal startup when you have completed the necessary troubleshooting.
   
  I hope this helps.

• Cannot connect to windows live messenger, error is could not close program when you try to download the new version of windows live messenger

  When you try to connect to windows live messenger, I have error message a new version of messenger is available for download. When I select Yes, wat happens in it will not download new version of windows live messenger but it says could not close the programs. Please help me again

  Hello

  Method 1.
  Here's how you can solve this problem:

  a. download the latest version of Windows Live Messenger available onhttp://explore.live.com/windows-live-Messenger-XP

  b. update of Windows XP through Windows Update.

  c. go to "C:\Program Files\Windows Live" and remove the 'Messenger' folder (Note: replace 'C' with your root drive letter)

  d. go to "C:\programdata" (Note: replace 'C' with your root drive letter) and remove Windows Live install and WLInstaller, if you have a

  e. restart the PC.

  f. run the installation program that you downloaded.

  Method 2.
  If the problem persists I recommend you ask your question on the dedicated Windows Live forums.

  Here is the link to the Windows Live Messenger category.
  http://windowslivehelp.com/forums.aspx?ProductID=2

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I bought a 2nd hand "IBM T30" without Windows XP, at the back of the laptop product key always there, can I download the XP by using the same product key?

  I bought a 2nd hand "IBM T30" without Windows XP, at the back of the laptop product key always there, can I download the XP by using the same product key?

  Yes, you can, but you must make sure that you install a version of Windows XP OEM. either the product key on the label will not work

• model 550-223w: cannot download the recovery media after upgrade Windows 8.1 for Windows 10

  Buy computer with 8.1 Windows preinstalled on July 9, 2015.   Downloaded disc recovery media for Windows 8.1. Elected to download Windows 10 and even installed on July 30, 2015.  Attempted to download the recovery media for Windows 10 but refused because 1 only one download is allowed.  How can I get the computer to download Windows 10?

  For some reason any warranty start date is also may 5, 2015 instead of the date that I registered the computer with HP.  How can I change the start date?

  See the link below

  http://Windows.Microsoft.com/en-us/Windows-10/media-creation-tool-install

• How to disable the pop up "Windows Media Player cannot download the information on the media... "after the extraction of a CD without activation of network connectivity.

  When I copy a CD with Windows Media Player, I get the message pop up after the investigation period is over: "Windows Media Player cannot download the media for this CD information. The other titles, artist, and album will be identified as "Unknown" in your library. For best results, connect to the Internet or manually add media for CD information. »

  I know that the message appears when I turn on the setting to allow WMP to connect to the internet to get information about the media, but I don't want WMP does. What I want is a button I can push on the pop-up that says "don't show this message again" (similar to the warnings seen in internet explore). How can I disable this pop-up window without activating the internet connection option.

  In case you're wondering, the data from the internet are incompatible in the naming convention so when I rip an audio book, so I can listen to my mp3 player, I can't completely post-processing script because not all of the disks in a set have a coherent on the slopes or even name the disc etc. At least drives marked 'Unknown' is consistent and so easy to script for the reduction to a single MP3 file.

  Hello

  Do the following and see if they help.

  Registry warning
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  a. start Windows Media Player. Right click on the toolbar at the top, select 'Tools' and select 'Options '.

  b. Select the "Privacy" tab uncheck all options in the tab.

  c. Select the 'Network' tab uncheck all the options in this tab as well. Click on 'OK '.

  d. click "Start", select "Run" and then type "regedit" in the appropriate field. Press "Enter". Click on "File" and "export." Type a file name of registry backup that you can remember, which contains the current date. Navigate to the registry key "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MediaPlayer\PlayerUpgrade." Under 'Name', double-click "EnableAutoUpgrade." Under 'ValueData,' type 'no.' Go to "HKEY_LOCAL_MACHINE."

  e. click 'Edit', 'New' and 'key '. Type "WindowsMediaPlayer." Click on 'OK '. Select the new key, and then click on 'Edit', 'New' and 'DWORD value'. Type "DisableAutoUpdate" and press "enter." Select 'Edit' and then 'change '. Type '1' and click on 'OK '. Click on 'OK '. Click on "File" and "Exit" to close the registry editor.

  f. click "Start", "Control Panel" and "Security Center." Under ' Manage Security Settings for, "click on"Windows Firewall ". Click the 'Exceptions' scroll down until you see "Windows Media Player." Make sure that the box next to the entry is unchecked. Click on 'OK '.

  g. right click on the toolbar in Windows Media Player. Select 'File' and 'Work offline' to completely prevent Windows Media Player to access the Internet somehow. When you want to restore Internet access, right click on the toolbar, click on "File" and remove the check mark next to "Work offline."

  That should do it.

• Cannot download the 6.2 Palm Desktop and HotSync Manager (Windows)

  Cannot download the 6.2 Palm Desktop and HotSync Manager (Windows) for Tungsten E2.

  I get the error message: "unable to 1607 to installInstallShield Scripting runtime.

  Is there a solution?

  Thank you.

  Found this on the Palm.com support plate:

  http://KB.Palm.com/wps/portal/KB/common/article/20727_en.html

  WyreNut

• Cannot download the software due to a network problem

  Hi all I'm on MacBook Pro (retina, 15 inches, end of 2013).
  I try to install Windows 10 with the version downloaded from the Microsoft Web site.
  I finished uploaded and am trying to use Boot Camp to install Windows 10.
  However, I faced a question and it is that he "cannot download the software due to a network problem".
  I'm stuck here for an hour and I can't find a solution.
  I did all right until now by the following online tutorial but it prevents me to continue.
  Any help will be appreciated.
  Thank you.

  It is a very common problem. To fix this, first try to start your Mac in safe mode by following these steps-> safe mode try if your Mac does not commissioning - Apple Support

  Then, restart your Mac as usual and try to download the Windows support software again.

• I can view is no longer the video files to the format AVCHD using Windows Media Player on my desktop

  I can view is no longer the video files to the format AVCHD using Windows Media Player on my desktop.

  I could at some point... but now all I get is audio, no video.  The files open and work on

  my laptop that also uses Windows Media Player... but for some reason now... nadda.  Seemed

  This all started when I upgraded Windows more late service CAP and also installed Real Player.

  Help!

  Hello

  • What version of Windows are you using?

  1. it is possible that you are missing the codec to play the file or it is clashing with other codec files.

  2. the link provided below lists supported by Windows Media Player file format.
  It does not list the AVCHD or. MTS files supported file format directly:
  http://support.Microsoft.com/kb/316992

  3. yet we cannot be sure at this point that the issue is due to interference with some files.

  Method 1:
  Alternatively, you can perform a restore of the system to a previous point, when the issue was not present. The System Restore tool uses points of restore to return the system files and settings to an earlier point in time. You can use it to restore the operating system to a point in time where you have not experienced the problem.

  Note: When you use System restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To do this, there must be a restore point from the system in which the connection was successful.

  Please refer to the below of the help links on performing a system restore.
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Method 2:
  You can determine which codec was used with a specific file; read the file in the player, if possible. When the file is playing, right-click the file in the library, and then click Properties. On thefile tab, look at the Audio codec and Video codec sections.

  Then you can uninstall any installed codec and install that you need to do the job file.

  If you have several codec for the single file to work they can clash and cause problems.

  
  You can check the link for assistance on the issue - below

  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

• Cannot display the page XML cannot display the input XML using the stylesheet XSL, how to fix?

  How can I fix this error code:

  The XML page cannot be displayed

  Cannot view XML input using XSL style sheet. Fix the error and then click the Refresh button, or try again later.

  System error:-2146697211. Error during processing of resources "file:///C:/Documents and Settings/a/desktop/SMART.xslt.

  The operating system is Windows XP Home Edition.  I use browsers IE 8, Safari and Mozilla Firefox.

  I'd never see this error until I installed HDDScan (http://hddscan.com/), a diagnostic utility, to check my hard drive.   The test is a S.M.A.R.T. analysis and produces this error message when you use this software.
  A web site indicates that installing Microsoft. NET Framework can solve this problem.  I already have this class in Add Remove Programs: Microsoft .NET Framework 1.1, Microsoft .NET Framework 2.0 Service Pack 2, Microsoft. NET Framework 3.0 Service Pack 2, Microsoft .NET Framework 3.5 SP1, Microsoft. NET Framework 4 Client Profile.
  Is the problem, a missing software program or a corrupted file?  What is Microsoft. NET Framework?  I use selective with most of the disabled items in the services (except hide all Microsoft) and start more disabled under Startup.  Is there something that needs to be checked to activate a service or start to correct this error message?
  How to solve system 2146697211 errors: cannot display page XML cannot display the XML input using the XSL stylesheet?

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. Please post your question in the MSDN forum. You can follow the link for your question.

  http://social.msdn.Microsoft.com/forums/en-us/iewebdevelopment/threads

  Hope the helps of information.

• Impossible to copy files to the Sansa Fuze using Windows 7 (drag and drop, or Windows Media Player)

  Hello

  Yesterday, I bought the Sansa Fuze and I have problems copying files to the device using either Windows Media Player (Sync) or Drag and Drop (Explorer).

  The symptoms are:

  (1) the device is recognized and available in Windows 7 (Series USB MSC - sorry don't have it with me right now)

  (2) took me to upgrade to the latest firmware, which has worked flawlessly

  (3) when I try to drag and drop a file on the device (I use Windows 7, 64-bit), it starts, but doesn't seem to calculate the size of the files or waiting time to download correctly.  It is followed by a slow progressive, until the computer crashes, resulting in a constant 100% of the CPU.  The only solution is a hard reboot

  (4) when you use Windows WM, the device is recognized, okay and the synchronization starts, but it then stops without reason.  Once again, the processor springs and requires a reboot

  (5) using the results 3 and 4 in 1-5 files being copied across, but not more.

  (6) I tried several albums and one album at a time, but cannot determine if that makes a difference.

  Help, please!

  See you soon,.

  Richard

  It may be a bug in Windows 7. But one thing to try is to go to the Device Manager (assuming that Windows 7 still has), uninstall the "rocket" (under USB controllers), and then run add hardware to find and reinstall the driver.

  Use the MTP with Windows Media Player mode, MSC mode without.