Cannot enter BIOS - Satellite-P50t-A-119

Similar Questions

• Satellite P50T-A-119 - screen does not work and recovery never ends

  Hello

  I have a Satellite P50t-A-119
  The built-in screen no longer works:

  The Toshiba leading innovation splash screen * never * appears on the * built-in screen *.

  On a * connected external VGA-display * I see the following type of screens (if the machine was forced to stop, it can detect before if connected externally powered, another screen image any at all):
  -BIOS (after F2)
  -Boot (after F12)
  -all screens simple to begin repairs (with a blue background).

  I already tried all possible types of recovery (the recovery on the HARD drive partition, with 3 sets of recovery DVD), repair, refresh, never successful auto repair.

  When I start a recovery from DVD (with the external screen), it wonder in order all DVD, copy the files, etc., request to restart the computer. Then after the Toshiba, Leading innovation splash screen appeared and shot a little, I * don't have an external display black-lightning *.
  When I start a recovery from the HARD disk, the Toshiba leading innovation appears and for a long time increases %-complete. After a while (every 45 minutes approximately at 60%), I have the same situation: only an external black lightning.

  This situation is already after I sent the machine (with the same symptoms) to Toshiba service center. They have reinstalled the recovery image (which I think was still okay) and charged me the equivalent of EUR 100, saying: there is no guarantee. When I got the machine I could actually begin as out of the box, after the updates first 83 (initiated by the preconfigured McAfee) and 2 reboots of the laptop is already more (hangs up, without the screen, etc.).

  So my questions:
  -make anyone had similar problems? And a solution ;-)
  -Doesn't he know about the procedures used by the service center to reinstall the recovery image (I'd like to be sure that it s warranty/defective material before I send it again)?
  -A way to check the material?

  Any help is greatly appreciated.
  LeMeutz

  Hello

  Sorry to hear that you have all these problems with your laptop.
  At first, I must say that I've never had such a problem and can not say with certainty what can be wrong there.

  In my opinion, the main problem is the screen. It's OK that you try to use the external screen and try to solve this problem, but I think that recovery image installation is not solution for this. You wrote that your machine has been already verified by Toshiba service but I n t understand what was the problem with the display. Is everything is OK with the screen now or not?

  Back to the recovery image:
  This is a user forum, and I think that no one here will be able to explain the policy of service exact Toshiba but, in my opinion, if you have long guaranteed valid, service provider is required to help you without taking any money except in special situations such as the removal of the BIOS password. So I don't understand why they took 100 euros for the recovery image installation.

  I think you should contact the new service and explain the situation. Do some photos as proof of what exactly happens and tell them you want to have good rework the device. You paid for the new product, you have the guarantee and book must work. If there is problem, service should make the diagnosis, what is the problem and fix it.

  Later when get back, creating you recovery media first. It can be DVD or USB. After having done this disabling automatic Windows update and when you will be informed about updates check the list and install important updates only. Do not install updates such display or WLAN driver.

  Sorry, but I can't say much.

• Cannot enter BIOS or boot from CD - Satellite 5100

  Hello

  one of my friends has ruined his Toshiba Satellite 5100.
  He has erased all the partition on the disk hard while the laptop always using the default setting.
  so, I could not boot from the cd or enter the BIOS.
  Is there any solution for this?

  Thank you

  Hello

  You can use different ways to boot from the CD drive.
  You can press the C key immediately after restarting the laptop.
  In this case, the laptop should boot from the CD. (Don t forget to insert the CD)

  Another way is to change the boot order in the BIOS. To enter the BIOS, please use the ESC key.

• How to enter BIOS Satellite Pro A120

  I have Toshiba Satellite Pro A 120

  And I can not open the installer

  How can I open the Bios Setup

  What is the keyboard shortcut

  By using the ESC key at the beginning you can enter the BIOS settings. Please after turning on the laptop press the ESC button and hold down for a few seconds. Just follow the menu on the screen.

• ThinkPad E330 cannot enter BIOS/UEFI more

  Hey guys, I got a very annoying problem with my E330.

  He came without OS, so I put 8 Win on the preinstalled HARD drive. Then, I went out for one SSD and put Win 7 on it.
  (all UEFI mode)

  Since then I can not enter in the BIOS/UEFI more press either Enter or F1.
  Pressing enter gives me still a beep, but then Windows continues to load normally instead of view several options, like he used to do.

  And yes I am aware that I need a cold start to Win 8 to enter the UEFI

  The only way to access UEFI at this time is through charms-bar restarting 8 Win in UEFI thing.

  I tried to reflash the BIOS that does not of course because this is the same version, tried to remove the CMOS battery, that gave me an opportunity to enter the UEFI with F1 when he complained the date/hour of time.

  Switching to Legacy only brings me to an infinite PXE - something loop of the error, but I still cannot get into the BIOS.

  I tried pressing all combinations of keys Fn + F and without the Fn. Nothing works.

  I don't want to return the laptop, but it is a deal breaker for me if I can't Win 7 running on this subject with UEFI accessible.

  OK, the problem was solved with the help of the someotherguy of the user from the forum. It has detailed instructions.

  Looks like that install Win 7 mode UEFI corrupts the BIOS.

• Cannot enter BIOS on Win 7 HPE with American Megatrends BIOS

  Although others have asked how to access the BIOS Setup interface, the answers have not solve my problem. so I write another similar question.

  According to the subject line, I can't access the BIOS Setup interface during startup.  My system runs Windows 7 HPE.  The equipment includes an elite group of ECS motherboard that came with BIOS of American Megatrend chip version 4.6.5 and is dated 05/03/2012.  I have never flashed or otherwise updating of the BIOS chip, but I could bring up the graphical user interface and change the options.  I did quite recently in fact.

  When I power fail system and/or entering the cycle of rebooting from the button start, the system stops and then begins to start and displays the start of American Megatrends screen.  Press DEL repeatedly has no impact on the continuation of start-up.  He proceeds as if the keyboard were not active and the system did not, therefore, the interruption of the keyboard...  Because the splash screen also mentions F2 and F7, I tried these interruptions as well, nothing helps.  The boot process has continued.

  I searched the web until my fingers are simple bumps and can't find anything really useful.  I read and reread mother ECS card manual without finding anything.  I found a FAQ on the web page of American Megatrends, which addressed problems to access the BIOS with Win 8, which suggests that the change of power options would be effective. However, these referenced power options do not exist in my win 7 system HPE.  Yes, Power Options are available from the Control Panel, but the individual options are not the same to win 8.

  FWIW, I pulled all the hard disks internal power cables to see if I could access the BIOS interface.  I was able to do so; However, without BONES, the keyboard is not active so no keyboard interrupts can be issued.

  I would be grateful for any advice on how to influence of post-processing to slow down and make sure that any issue the keyboard interrupt is seen and followed.

  Hello

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  By the description, I understand that the problem with you are not able to enter the BIOS American Megatrends BIOS setup.

  I can understand the inconvenience that you have experienced and will try my best to help you.

  In order to get more information about this, I suggest to visit the link below and check if that helps.

  http://***.com/products/BIOS-UEFI-firmware/

  Also, I suggest you to update the BIOS and check if that helps. Please visit the link below and check if that helps.

  BIOS: Frequently asked questions

  http://Windows.Microsoft.com/en-in/Windows/BIOS-FAQ#1TC=Windows-7

  Important: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• Cannot enter BIOS mode

  1. type of computer - ENVY HP dv7-7250nr

  2 opporating 8 64-bit windows system

  Recently, I received this computer. It is amazing that the only thing that could use a change is the keyboard. I got this as a gaming PC, but the function keys can be accesed when you press FN. In most computer games, the keys f # are your shortcuts. When I go to press me I windows has changed and the control panal appears.

  So I was looking around, and they say you can switch mode BIOS and disable shortcut keys. Only problem is that I can't enter the BIOS mode.

  I would be really grateful for the help on this, I don't want to go out and a whole-nother-key keyboard.

  Thank you in advance.

  PS. I hope, I put this is the right forum, if not then I'll post in a new one.* *.

  Princess.

  As soon as you turn on the laptop tapping on f10 key only starting.

  You must be quick.

  REO

• Cannot enter BIOS using F1 or entry

  I'm at a complete loss here. Brand new T430. I changed the settings in the UEFI BIOS and installed Windows 7 x 64 with success. But I can't get into the BIOS. Entrance to F1, F12, nothing works.

  Help, please!

  Thank you very much!!

  Hi all

  I solved the problem. Just an update of the BIOS!

  Strange that the initial BIOS does not work!

  Thank you

• HP Pavilion g6-1313sh Notebook: dual Radeon graphics card - cannot enter bios mode fixed

  Hello!

  I recently bought this laptop apart from my friend and is struggling with this for a few weeks now.

  I was on the forum every day for a few hours without result.

  so, my laptop is HP Pavilion 1313sh g6 with Win7. I have the latest version of the bios, so I could put my gpu bios mode set instead of dynamic.

  Here's the problem... When my setting was dynamic, I got the "switchable graphics" option and I could put the preset by application. as many people pointed out, it really does not work, so I went back to fix.

  This option is now missing. so I tried in CCC, following this: http://support.hp.com/us-en/document/c03048374 in the fixed bit.

  It is, I have no change option... I only get the graphics card AMD Radeon Dual 'activate' or disable... but not the button to switch permanently to the highest performance card... checked in CCC, it recognize my 2 cards under hardware (1st HD6520G 2nd is Hd7400M).

  I start to tear up the rest of my hair. Please can someone tell me what I miss? as said, the most recent drivers from the site is all settled.

  Thank you!

  Hi @SmokeyJohnny ,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP Pavilion g6-1313sh Notebook and issues with graphics switchable. You can do a System Restore. System Restore will help if something is automatically updated and wasn't on the laptop.

  When running a system restore note remove all USB devices. Disconnect all non-essential devices because they can cause problems.

  If this does not resolve the problem would be to uninstall the graphics drivers listed in your device manager. Reboot the laptop and it must be reinstalled the proper drivers. Yours is the AMD Radeon HD 6520 + 7450 Mr. here are your drivers if you need.

  I hope this helps.

  Thank you.

• Cannot enter BIOS or Option of Boot to display on my desktop Acer Aspire M3450

  For the last few days I tried to access in the BIOS or The Boot Options screen by pressing the keys with " DEL " for BIOS and ' F12 ' to The Boot Options screen. Same pressing down both keys on my keyboard and switch to normal startup with Windows 10 logo screen and then type password. I'm sure you know that this office is not supported for parameters of the UEFI. I tried with Settings\Update and Security-Advanced Options- then have 6 names on the double column , but I'm not sure that one to take to solve the problem. Here are the 6 names below:

  System restore

  System Image recovery

  Startup Repair

  Command prompt

  Startup parameters

  Go back to the previous version

  Everything what I wan tis to solve two things by pressing the ekys for BIOS and the Boot Options screen. That's all that I need it. Or I need to reinstall the entire disk operating system Microsoft Windows 10 Home Premium 64?   Either way, my computer's desktop Acer Aspire M3450 game.

  Thank you

  John

  It's a good thing I do not get out the my desktop's CMOS battery. Someone I know told me I 'Try to change the keyboard' Guess - it works now. The USB keyboard that I just bought does not work so I went back to the wireless keyboard that I used all the time. So now my problem is solved.

  Can I ask a question - why doesn't the USB keyboard support to accept that I press the key after the reboot for BIOS or Boot Display Options? Hope that someone here in this forum will answer for that.

  Thank you

  John

• V3 - 771 cannot enter BIOS to rebuild from recovery DVDs

  Hi all

  My installation of Windows 8 has been corrupted and does not start. So I just want to get the laptop to boot from the recovery DVD or any DVD so I can rebuild.

  No matter how hard I press F2, nothing happens and I get "no boot device, press a key." It just takes me to a blank start menu! I tried with what I know to be bootable CD/DVD internally and have used external DVD drives.

  I want to just get into the setup to boot from the DVD drive. How difficult that can be. Very far and completely frustrating.

  Any advice or help welcome.

  Thank you very much for your time.

  Paul

  Hello again,

  This problem is corrected now strangely. I had tried to start on many drives of type Ultimate Boot with no luck. I jumped in a DVD of Windows 7 which has started loading, but didn't the first time.

  I rebooted and then the "F2" worked well. I changed the classic UEFI BIOS got up the menu key to boot at startup and started on the DVD of Windows 7. Load up now very well.

  This is nuts. Affect the initial installation of Windows 8 that crashed BIOS/UEFI? I'm old school and both should be completely independent. The operating system should have nothing to do with the computer startup mechanism.

  Thank you very much

  Paul

  Edit: Looks like Secure Boot is the guilty https://technet.microsoft.com/en-us/library/hh824987.aspx

• p6320f cannot enter BIOS

  Hello

  I have a serious problem I think...

  My p6320f freezes usually just on the HP logo... Sometimes, however, if she was going on the logo, it shows an error something like "unable to boot from the hard drive.

  He can't get into the BIOS! No matter how many times I press F10 (or any other F keys), it freezes.

  PS: Just installed a new Seagate 2 TB internal SATA hard drive after the failure of the original

  Any ideas?

  Thank you

  johnstevens wrote: Hey Hanspuppa if it's the fault of the card from my mother, it means I need a new computer?

  Or can I just know what part of the motherboard is defective? If so, how? Thanks for the help. JS

  Hello johnstevens, usually the only element on the motherboard that can be replaced by the user would be the CMOS battery.

  I replaced motherboard capacitiors failed a few years ago, when these faulty capacitors have been a real problem for the PC industry. This problem has since been resolved largely. Different types of motherboard capacitiors are now used.

  There are also some cards diagnosis motherboard which are used to diagnose motherboards, but they are mainly used by manufacturers of motherboards. When they find a defective item on the motherboard, they have the tools and expertise needed to replace the defective item and it recheck once the repairs have been made.

  If the CMOS battery does not solve the problem, a motherboard replacement seems to be the most viable solution, or buy a new computer. These replacement motherboards can both, cost half the price of a new Tower.

  You wouldn't need a new monitor unless your current monitor is an old, defective, or you want a larger screen size.

• Satellite P50T-A01C - how to enter the BIOS settings?

  Can someone tell me please how to enter the bios on the Satellite P50T-A01C
  I tried fn f2, f10, delete, not go...

  Does anyone know how to get?

  Thanks in advance.

  If you use Win8, you must proceed to a full stop, and then after the new departure enter the BIOS settings.
  Please check - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
  Try to please and post comments.

• Satellite L50-A-119 - BIOS stuck

  Hello world. I have a problem that I've never had before. I have the Satellite L50-A-119. When I said the update of the BIOS - it went to 100% and got stuck. I can't do anything, I don't know what to do now. This is an image on the screen on the witch he's stuck:

  http://postimg.org/image/e96w58zj3/

  Hello

  To me, it seems that something was wrong during the BIOS update process.
  Usually the laptop stops after the BIOS update process was finished.

  I'm afraid that you need professional help to fix this m.
  Problems of updating the BIOS, the Toshiba certified maintainer must be contacted to arrange the next steps.

• Tecra M5 cannot enter the BIOS to change the setting too boot from cd first

  Tecra M5 cannot enter the BIOS to change the setting too boot from cd first

  I bought on ebay and the seller sold me a dubious version of xp so I want to format and install my own at the start he said:

  The Intel Boot Agent GE v1.2.31 initialization
  KE - E05: the LAN adapter's configuration is corrupted or has not been initialized. Boot agent cannot continue

  Hello

  The message looks like you tried to boot and install Windows LAN

  If you want to change the boot order, I recommend pressing the F12 key, immediately after that the laptop was turned on!

  A new start menu should appear, then you can choose the reader of CD/DVD (ODD) and a boot device.

  Also by pressing the C button should allow you to boot from the CD inserted, bootable.

  Welcome them