Cannot find my network driver

Similar Questions

• Cannot find the network driver

  Hardward Ids:

  PCI\VEN_10EC & DEV_8136 & SUBSYS_2AB7103C & REV_05

  PCI\VEN_10EC & DEV_8136 & SUBSYS_2AB7103C

  PCI\VEN_10EC & DEV_8136 & CC_020000

  PCI\VEN_10EC & DEV_8136 & CC_0200

  HP slimline E5000

  s5716f

  Windows 7 ultimate 32 bit

  Installed several drivers failed

  Help, please

  Hello

  You have problems because of the drivers didn't like these drivers belong to Eathernet port

  You can connect your Internet if not fallow the steps

  1. go to Device Manager and uninstall and reinstall the driver for the network card

  2. after having what its still the same try doing system recovery fom F11

  3. always if it's the same problem the motherboard needs to be replaced because the port net eather is part of the motherboard

  Thank you & Regarsd
  Dinesh Kumar
  * Click on the thumb BRAVO upwards on the left say "thank you."

• My computer has virus of the FBI, I wiped it is clean but now it cannot connect to intermet because it can't find the network driver how can I find it?

  My computer has virus of the FBI, I wiped it is clean but now it cannot connect to intermet because it can't find the network driver how can I find it?

  Since you have formatted the PC and reinstalled Windows, your question will be handled better in the hardware forum space and drivers for Windows 7, so I'll move it there.

  Apparently, you need to install the driver of your PC network. If you used the CD to restore the PC manufacturer that should have been included, but it may be on a 2nd CD with drivers and programs.

  If not, the first thing to do is contact the PC manufacturer to see if they have a driver available for download. If the PC has a wireless network card and wired, perhaps one has been configured, but not the other and you try to use the not yet detected and installed.

  -steve

• Equium - cannot find all networks to connect

  Not very computer savvy so will try to explain the problem as best I can.

  I can connect to my internet connection via ethernet cable, but cannot connect wireless (although I have before).

  The wireless function is enabled and the orange light comes on. When I open connectivity doctor and go on the radar screen, my internet connection appears (along with a few others)
  When I hover over the connection icon at the bottom of the screen, it says that "wireless connections are available", but when I click it it establishes that "windows cannot find any network" then understand that there must be an easy way to solve this problem, it can not find all networks to log, mine or one of my neighbors!

  Hi paulymart,

  Which model of laptop, you have exactly and that you've updated the driver WLAN?

• When I perform a net view on, I get the error system error 51 next. Windows cannot find the network path.

  Net 51 with a view system error

  I have two boxes of Windows XP that I login as administrator account. I was able to synchronize files, map network drives and can do a tracert to reach one of them.

  However, when I perform a net view on, I get the following error

  51 system error has occurred.

  Windows cannot find the network path. Make sure the network path is correct and the destination computer is not busy or turned off the coast. If Windows still can't find the network path, contact your network administrator.

  How to make this command work?

  Hello

  ·         Your computer is on a domain network?

  Follow the steps in troubleshooting this article and check if that helps:

  You cannot access shared files and folders or browse computers in the workgroup with Windows XP

  http://support.Microsoft.com/kb/318030

  See also this article that resembles the same error.

  Error when you try to access shared resources on a computer that is running Windows 2000 or Windows Server 2003: "53 system error has occurred" or "51 system error has occurred."

  http://support.Microsoft.com/kb/259878

• Windows cannot find any networks, but Ubuntu can! (X 32 Vista Home Premium)

  I recently replaced a faulty laptop computer mother board with an identical model (only difference is a newer version of the BIOS). After restarting Windows (Vista Home Premium 32 bit) I can't find the networks wireless where I can see usually eight networks at least an unsecured connection, but now I get nothing.

  I replaced the wireless card Atheros with an Intel Pro 3945ABG driver and installed the latest version and that I still get the same error "Windows cannot find any networks", I can get access to the internet via an Ethernet cable but I am unable to connect wirelessly. If I try to manually configure the wireless connection, I get "unexpected error occurred".

  I started the system from a CD of Ubuntu to check that it was not a hardware problem. Wireless card perfectly, sees all the networks, connects and works very well.

  It seems that something inside Vista has failed since even change the wireless adapter for a different manufacturer and the results of the modeling in the same error, pointers?

  Kind regards

  Jason.

  SOLVED

  It turns out that Kaspersky Internet Security is at fault and he was very happy to work via ethernet it had mutilated all WLAN connections.

  Removal of Kaspersky and all of a sudden all the wireless networks have re-emerged.

  Kind regards
  Jason.

• Windows Vista cannot find any networks after reformat

  Windows Vista cannot find any networks after reformatting. Help!

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows cannot find any networks

  Hi all

  My dsl network connection is not discovered by vista suddenly I have tried all possible means, but to no avail any help would be greatly appreciated!

  the error message says "windows cannot find any network."

  its a DSL connected via a LAN connection

  I think I found the culprit, it turns out be a updated windows defender definition... ive stopped using my network connections now run fine LOL

• HP Color LaserJet Pro M177 MFP: HP Color LaserJet Pro MFP M177 cannot find information network

  I just got my new printer today. I followed the instructions to the letter. Now I try to connect to my network to the "Wireless Setup Wizard" that my router does not support WPS. I sat waiting for the printer view all networks in the range so I could choose mine and continue on. However, after 15 minutes of waiting, I decided to go shopping while he did his thing. I came back 1 hour later and it's still displaying "Retrieve information from wireless network" with the symbol of HP and a blue bar encircling it. It is not locked up as I can hit the Cancel button and it returnes to the network configuration menu. What I'm doing wrong here? My network uses a router NETGEAR WNDR4500 with security WPA2-PSK [AES] is enabled. It transmits the band b/g 2.4 Ghz and 5 Ghz n band. Please any help would be appreciated.

  Hi @Rieu,

  Welcome to the HP Forums!

  I see that your HP Color LaserJet MFP M177 Pro cannot find the network on Windows 7. I'm happy to help you with this problem of connection!

  Please, take a look through the steps in this guide, "Printer is off-line" Message appears on the computer and the HP printer does not print. Thus, this guide, the printer is not maintaining the wireless connection.

  Tips for troubleshooting wireless problems

   

• Acer Aspire AX1920-ER20P suddenly cannot find my network card

  All of a sudden my Acer Aspire AX1920-ER20P cannot find my network card (does not appear in Device Manager, it not there NO Network tab). It was working fine a few hours ago. How can I get windows will recognize the device and view it in Device Manager, I can update the drivers if necessary or reconfigure? I know not what network card is in it and how to find out.

  The options here, look at your photos.

  On the adapter, it will work.

• I had a bad copy of XP, caught a virus, bought a new genuine copy of XP, now the installation program tells me that it cannot find my hard drive. any suggestions?

  I had a bad copy of XP, caught a virus, bought a new genuine copy of XP, now the installation program tells me that it cannot find my hard drive. any suggestions?

  You try to install through the Explorer windows, not good... Try to install

  XP CD, reboot the pc. At this point, the value of the BIOS pc boot xp cd (cdrom), defined as 1

  boot device, set the hd as the second, boot to a cd. On the menu of the xp cd, select "Install xp", remove

  the partition, create one, let xp format & install auto. It is a clean installation, also, once she

  housing starts, do not touch any keys or mouce until xp asks for the product key #...

  You can read about it here. http://TechNet.Microsoft.com/en-us/library/bb457062.aspx

• Epson Event Manager cannot find the scanner driver. Epson said that the event handler is a windows thing, and so is the problem.

  I installed an Epson Stylus SX215. I can print, scan and copy if I use another way, but if I want to use the event handler it says that it cannot find the scanner driver may not use the event handler at all (cannot yet open the program).
  In addition, the scan option "attached to electronic mail" does nothing either. Don't know if this is because the event handler program or because he can not see e-mail programs I have.

  Hi bdelrio,

  Thanks for posting. Try running a System File Checker to find errors.

  Click Start.
  In the search box type cmd
  In the menu start right click on cmd.exe and select Run - As-Administrator.
  In the command prompt, type "sfc/scannow".
  Allow this to fill and run. Please let us know if this corrects and error, or if it reports errors, it cannot fix.

  Thank you! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• error message "windows cannot find any network."

  When I try to connect to my wireless network, I get an error that says "windows cannot find any network". Already called my internet provider and has been sent back to microsoft. I have a netbook at home and he search for connection to the internet, but my desktop running Windows Vista Home prem is this error message. I use microsoft MN500 as my router.

  Hello

  1 are there any changes or updates made on the computer?

  2. were you able to connect to the network before?

  Method 1:

  I suggest you to return the item and check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  I suggest you to reset the TCP/IP Protocol and check if it helps.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Method 3:

  See the link and check if it helps.

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers

  http://support.Microsoft.com/kb/928233/en-us

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up the registry, (http://support.microsoft.com/kb/322756/) see link:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

• My B210a happens with radio but cannot find my networks.

  My B210a happens with radio but cannot find my networks. I tried a branch and the restoration to factory defalts. I tried my network SSID and pass word. STIL not luck.

  I can't find my invoice of purchase, but it is registered with HP. With my luck, I'll have to use USB. Thank you

• Mac OS 10.5 Hello cannot find the printer driver for P1606dn connected via a wired network.

  I tried to connect my HP Laserjet Pro P1606dn to my PowerMac G5 running Mac OS 10.5.8.  I have connected the priner to my LAN via the Ethernet cables and Switch 8 port NetGear.  I then properly installed printer driver from the CD provided on the Mac and went into system preferences / Print & Fax to add the printer to the list of the connected printers.  Click on the button «+»  The HP P106dn was listed in the table (kind = Hello).

  I chose this entry in the table, and the dialog box immediately went into action: the pullodwn "to Print using" listed the message 'Please select a printer or driver model' greyed and a spinning wheel called 'Search for new drivers' appeared underneath.  The dialog box search but never find the printer driver (I waited for 20 minutes without success).  I installed some other HP printers in this way on this machine with no problems, for example, HP Color Laserjet 2605dn.  Why this method does not work with this printer?

  I was able to connect to this printer with other (Intel) Macs in my house through this arrangement of LAN.  Is the printer driver for the Intel Macs only?

  I disconnected the printer from the local network and connected directly to my Mac with a USB cable.  The same process, and I was able to connect to this printer.  Successfully print a document page.  Although it gives me a work-around for Mac G5, I need to share this printer with other Macs in my household.

  I went on the HP download site and downloaded the latest driver for this printer, re-installed the printer driver on Mac and repeat the steps for the arrangement of LAN (above) complete the connection via the Print & Fax dialog box.  The result was the same: spinning wheel looking for a printer driver are not.

  I don't know what else to do, or why this facility will not work.  I would much appreciate it if someone could give an explanation for this or any suggestions as to what can be done?

  Ed

  I'm sorry to get back to you on this so late.  I was OOT Sunday all day.

  Ok. So, here is what happened.  As I mentioned at the end of my last post, I was in the process of resetting my printing system, repair disk permissions, then restarting.   Reset the printing system wiped out all my printers in the "Printers" pane in the "Print & Fax" system preferences dialog window  I moved forward and fix permissions of the drive on my system disk.  A number of authorities have been repaired, but nothing that I could decipher impression related ro.  Finally, I restarted my Mac and went directly to the dialog box print & Telec.

  As the printers pane was still empty, I'm gone before adding the simplest of my printers (LaserWriter 360 connected via AppleTalk) who has always been correctly added to the list printers in the past.  No chance!  WAITED a few minutes everything is was "Looking for new drivers.".  I tried the Color Laserjet 2605dn.  No luck.  Then the Laserjet P1606dn.  No luck.

  Thus, this way of solution did not work, and now I was without any driver associated with one of my connected printers.  I decided that I had no choice to rebuild the operating system.  I started my DVD of Installation OS 10.5.4 to rebuild my system (without reformatting my HARD drive).  Once which was finished, I've immediately went to the Print & Fax dialog box and tried to add in each of my printers.  In a few seconds the LaserWriter was added successfully, then the HP Color Laserjet 2605dn, and FINALLY, the Laserjet P1606dn.  Thus, it appeared that my upgrade to OS 10.5.8 was at the origin of the problem.

  I proceed with Sofware Update to restore the computer to OS 10.5.8 and again once, went to the dialog box Print & Fax to experiment with the addition of each of the printers again.  Stopping before the acceptance of each 'Add', I could find quickly and successfully the drivers for each of the connected printers.  So, it doesn't seem to be a problem with OS 10.5.8 find printer drivers.

  After reflection, I concluded that the problem must have appeared during the upgrade to OS 10.4.11 OS 10.5.4, but it remained hidden until I tried to add these new printers to the list of printers.

  I appreciate the reference to the last download Laserjet full feature software.   Since I was able to solve the problem without it, I mind not do the download.

  I want to thank you for patiently stay with me during the last two weeks, your advice and comments.  Just having someone to "talk" about it, it was reassuring and useful that I went along to apply each suggestion to the problem.  I tried to solve this problem several times on my own before that, the search of the forums, and I hesitated to participate actively – to reach out.  I'm feeling very different about it now.  Once again, thanks a lot.