Satellite A665 - 12K: BT does not work - cannot find the remote service

Similar Questions

• Satellite A665-S6086 - keyboard does not work after the outpouring of fluid

  I have a Toshiba Satellite A665-S6086 laptop. A couple of months, I spilled the zeroth power and he went on the keyboard. I'm sure that some went through it as well. The computer turns now and I can use an external mouse and external keyboard. Nothing on my keyboard does not work as well as the mouse. I can't go on the internet due to not being able to use the F8 key so.

  The only key/button that works is the power button. The dvd/cd drive works.
  Help, please.

  The external key board I use has no FN key. a f1 to f12, but when I hit the button on the external key board f8 nothing. Please help me get internet light somehow.

  Thank you

  And what kind of help do you expect now? What can we do?
  Why you n t fix it and be happy with the new keyboard?
  How long you want to use your laptop in such a State?

  Contact Toshiba service, let them swap keyboard and clean your laptop. OK it's a bit chilly but you'll well workbook again.

• Satellite L40 - 15G - WiFi does not work - cannot activate usign FN + F8

  Hello

  I have a toshiba satellite L40 - 15 G with windows 7 32 bit and my wireless is not working, the pilot is OK
  I do FN + F8 and I can't active wireless :(

  What should I do more?

  Hello

  The Fn + F8 isn't really essential to use the WiFi network. Generally, the WiFi network should be enabled by default.
  So even if the Fn + F8 does not work, the WiFi network must be enabled.
  You see the local network card in Device Manager? Is it correctly recognized?

  Where he is, follow these steps:
  Go to the control panel (switch to the large or small icon view)-> network & sharing Center-> left column manage wireless networks
  Add here new WLan and configure it by using the right SSID, encryption and password encryption.

• Satellite A665-11Z - webcam does not work

  Hello

  I have a PC laptop toshiba Satellite A665-11Z...
  For some reason any my webcam stop working...
  I already install the driver several times, but the driver is not able to find the cam...

  Can someone help me... don't know what to do

  Hello

  You can see the webcam in Device Manager?
  In Device Manager, the cam should be listed under imaging devices-> USB video device

  If it s are not, check if there are some unknown devices.
  Usually, this should be the cam.

  I put t know which driver/software that you have chosen but the Satellite A665-11Z belongs to the PSAW3E series and you must choose this to get the right webcam software!

• Satellite 5100: Driver CD does not work to recover the operating system

  My laptop Satellite 5100 did not work today. The whole system broke down, and I can not open any program. I want to recover my system but my CD driver does not work, I can not use the recovery CD to run the system.

  What should I do? Can I replace a new CD by myself? Is there another way to recover the system without the CD driver?

  Thank you very much and I look forward to hear from you.

  Hello Bingping :D (Lazy nickname)

  Well, first of all you are sure that the drive is dead or it of just not possible to boot from the recovery CD?
  Press the C key immediately after booting laptop (by pressing the power button) to boot from the CD drive.

  If it doesn t work so try to boot from the original Windows CD. Perhaps the Toshiba Recovery CD is damage. But if it is not possible to boot from a CD so I would say that the reader has a malfunction.

  Of course you can replace the car yourself. It of not very difficult, but you must be careful. Not every drive is compatible. The caught player support, you can order the Toshiba ASP in your country.

• How to remove the part of an object grouped several using a shape (Pathfinder does not work, cannot get the knockout groups to work)? Kind of like the opposite of a clipping mask.

  I want to remove the portion of these legs inside of this graph, because a white circle solid at the Center intensifies the effect of the spiral.

  Background, the spiral is a mixture of the people flying around in a circle. The circle is then copied and turned several times. I have not developed the appearance again.

  There must be an easy way to do it, but I can't use the Pathfinders, the opacity mask, knockout groups, and make simple layers does not work. I just want to axe the legs of these easy people!

  

  

  

  This is not correct

  

  I do several models and want to find a way to make it easy and fast!

  

  Thanks to you all!

  Emmanuel,

  If I (put) correctly, you should be able to get the opacity mask to work as follows:

  Select (only) the White path and the mixture and then in the transparency palette flyout on create with unchecked Clip opacity mask and mask invert checked.

  Who must hide the inner part of the mixture corresponding to the white circle and let the front remains visible oin the background (circle and all that.)

  .

• Satellite A500-1GL - Microphone does not work after install the OS re-

  re-installed OS updated all bios drivers etc. Can't get anything to record. Skype not getting no sound. Do not record other programs.
  Have uninstalled and reinstalled all the audio drivers, including the driver of the webcam.
  Have you checked the forums, but cannot find any solution.
  Can anyone help?

  Satellite A500-1GL.
  Windows 7 64 bit

  You have reinstalled original Win7 64 bit family Premium that you got with your machine?

• X 230 bluetooth does not work - cannot use the cell phone as personal hotspot

  I try to use the bluetooth in my X 230 to connect my laptop with my cell phone. I want to be able to use my cell phone as a personal hotspot, where I am in an area where no WiFi secure. I would have thought that it would be a standard feature in a laptop that is presented as a business device, but apparently this is not the case.

  I installed the bluetooth driver and the updated system, as suggested by joelle...

  http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?&docid=HT073834

  and

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS012808

  ... but it's still not working for me. I am now able to connect my mobile phone to my X 230, but instead of allowing me to access the internet via bluetooth, a dialog box appears that allowed me to play songs that are on my cell phone using the laptop speakers.

  I am disappointed that bluetooth driver has not come pre-installed on the 230 x, and I'm disappointed that I'm not able to use my cell phone as a personal hotspot for my x 230.

  I solved the problem myself by following the instructions on this page.

  http://www.kevintaber.com/2012/05/25/iPhone-personal-hotspot-via-Bluetooth-tethering-to-Windows-7/

  In Windows 7, go to the control panel > hardware and sound > devices and printers
  Then right-click on the bluetooth device (in this case, an iPhone) and choose Properties
  Deselect all EXCEPT Personal Area Network Access Point

• Updates do not install, Sections of Vista does not and cannot start the Audio Service

  I try to install the updates on windows update but important as the service package 2 do not work, they start then stop and say failed code "WindowsUpdate_80070643"

  boxes keep popping up saying some files are damaged or not installed properly and that I should reinstall as a file call... system32\AVRT.dll. Windows Media is not no longer works.

  My Audio service is not running, I'm not sure that there is a problem in microsoft windows but the button to switch on the audio does not, and a box pops up saying it does not yet have another pop up says that everything works.

  any help? Please

  Hello
   
  a. updates have you tried to install?
  (b) button to switch on the audio of your computer are you using?
  c. what exactly happens when you try to run any audio/video file?

  You can try the steps outlined in the article below and check if this help.
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643

  For audio problem you are trying to run the troubleshooter which may help. It search common problems with your volume settings, your sound card or driver and your speakers or a headset.

  1. open the troubleshooting of Audio playback by clicking the Start button, then Control Panel.
  2. in the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on the audio playback problems. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  You can also try to update check you and sound card driver if it works. The article below will help you do.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Also, check if the following services are set to automatic.
  a. Windows Audio
  b. Windows Audio Endpoint Builder

  Here's how:
  1. click the Start button, type services.msc and press ENTER.
  2. go to any services mentioned above at the same time, right-click on it and select Properties
  3. click on the tab general, select automatic for startup type. Also click the Start button, if it is not started.
  4. click the Dependencies tab and make sure that all addictions services are set to automatic. Then click on the OK button.

  After return to that exact error messages we can help you better.

  Let us know if it works.

  Kind regards
  Umesh P - Microsoft Support

• windows XP F6 installation does not work - cannot install the drivers for the controller

  I want to install Windows XP, I press F6 toload the AHCI AMD drivers from a floppy disk, but the installation stops when loading. How F6 to stop and allow the loading of the drivers?

  You should be able to install the AHCI drivers and change the interface after Windows is installed.

  If you have not already installed Windows, leave the setting as native IDE and install it normally.

  If Windows is already installed or after you're done install, install appropriate drivers for your controller and then change the interface of AHCI.
  You may need the chipset drivers installed as well.

• Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

  Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

  Hello

  Check with Toshiba support, online documentation and drivers (update or reinstall), and
  ask in their forums.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ========================================

  How to activate Audio devices hidden in Vista and Windows 7
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer (you want to be sure
  the mic input is enabled)
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  -----------------------------------------------------------------------------------------------------------------

  Pilots may also need to be updated:

  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek high definition
  Audio (this is an example and you can have an other name/maker).

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
  and then install the latest version. Restart and check after each test, not
  rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
  installed shows upward on the tab of the driver.
  
  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check see the
  Disconnected devices and show disabled devices - check your micro - highlight
  then on lower right properties. Make sure that the appropriate injector is selected and check
  other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

• Satellite A10 S203: sound does not work - just enough

  Hello!

  To my satellite A10 S203 sound does not work, I updated my sound card and the bios but nodifferents. Nothing in the system that says that I have something wrong whith my sound is just enough. I tried speakers headphones and challenging systemsounds, mp3, Auidi direct works cd... nothing.

  Any tip?
  [email protected]

  First check the status of the sound card in Device Manager.
  If there is a yellow climbing brand then you should try to reinstall the driver. (first remove it and after reboot, install a new)

  Have you checked the volume setting and the site of laptop? Eventually he s a very simple idea, but believe me, I read many comments here in the forum and a lot of guys forget this option simply.

• Satellite L300 (PSLB8C-0H901X) does not work

  My laptop Toshiba Satellite L300 PSLB8C-0H901X, does not work, no power, no MESSAGE, nothing, lamp power and charge Get when pluged into anything else, any known issues? All the fixes, thank you in advance for your help.

  Of course, your laptop is completely dead. In such situation, there is no magic solution and I m afraid that you need professional help. If there is absolutely no reaction is maybe defective electronic power supply and the motherboard must be exchanged.

  As you know this is part more expensive so you need to check if this is the solution for you.
  Call, explain the situation and let it check your laptop.

• Satellite P500-1CK - WIFI does not work

  Hello

  I bought a Satellite P500-1CK with Windows 7 64 bit. Cause I don't need, I replaced it with Windows 7 32 bit and now my WIFI does not work.

  I tried many drivers, Toshiba drivers and Realtek drivers, old and new versions. Installed and uninstalled them again and again. But it does not work. In the Device Manager, there is no error and no question mark. The map will be displayed as a RTL 8191SE, it's true. I've identified the vendor & device ID also.
  The other FN keys works like a charm, but FN + F8 does not appear. The wireless switch is active and the led is orange.

  When I type "cmd" then "ipconfig/all" it will be only shown the PCI Atheros Gigabit Adapter with the IP address, but not the adapter WLAN of Realtek.

  Searched Google @ and spend hours and hours, but I am at my wits end... Please help me.

  funthomas22

  Hi funthomas22,

  And this doesn t work exactly?

  You see a WLAN in range?
  Have you looked for WLAN networks?
  Can you connect to WIFI networks?

  A point would be interesting: can you try the same thing with preinstalled Windows 7 64 bits instead of your own 32-bit installation?
  Therefore, use the recovery disk Toshiba to restore the version of the OS preinstalled. You will have a pre-tested Toshiba Windows 7 installation where everything should work properly.

  Check this box!

• Satellite Pro 6100 Wireless does not work after restoring from HARD drive

  After that restore disks for installing a new HD and use and to update XP sp2, the Wireless does not work and if the card is installed XP hangs then works in fits and starts. If the card not in place, not bad at all.

  Booting from a Linux CD, the card works perfectly! I assume that the driver is the problem. The wireless card is the original, an Agere MPC13A-20/R, with Toshiba p/n PA317U-1MPC.

  I have found some drivers Agere, but am not sure

  (1) if they are correct
  (2) how to install since the machine works in a way limited with the card in place.

  Any advice?

  Hello

  I checked the page of the pilot and the only available for Windows XP WLan driver is the driver of v.1.11.108 Agere.

  (1) just try to install this driver. If the driver is not correct or is not compatible, then windows will not install the driver and you will receive a notification. You just have to try

  (2) generally you may reinstall the driver from the Device Manager. Open network controller tree, and then you can reinstall the driver.

  But this is only possible if the windows started successfully

  PS: Have you checked the information of Microsoft Windows XP SP2 update on the page of the Toshiba driver.
  I discovered that you need to update several utilities if you have installed SP2 on this laptop.