Cannot find my wireless

Similar Questions

• Error message: "cannot find the wireless device" and not scan using 3 in 1 copy fax print HP 4500.

  Original title: Carpenter

  I can print but can't scan. Tried to uninstall then install the 3 in 1 copy fax printing hp 4500 but says cannot find the wireless device.

  Hi Ryan,

  You can check the link to HP support to run the HP Diagnostic Utility to check the issue of scanning:

  Find and fix common problems using tools of diagnosis HP printer=

  You can also check out the link to HP support and try to update the latest drivers/software for your printer:

  HP support

  You can also read the articles and check if it helps:

  Add or remove a scanner

  Scanning: Frequently asked questions

  The problems of scanning

• C4780 cannot find the wireless router

  I have a new iMac and old Toshiba that is running Windows XP and you use a Netgear wireless router.  When I got to the printer, it worked fine on the wireless network.  Bought a new router that I couldn't work with the Mac and the PC so I returned to my original router.  Now, the printer does not work as a wireless printer.  Summaries of diagnosis indicates that the printer cannot find the wireless router and fails under "Network Name (SSID) Found."  On the Network Setup page, my network is listed as a network discovered by the printer.  I guess there is a simple solution and hope to find the answers here.

  Thank you very much!

  Some printers C4780 left the factory with a default misconfiguration.  This could be the reason why you can not see the hpsetup network.  Here is an updated set of instructions for manually adding the C4780 to a Mac:

  Part 1 - Get the printer in Ad-Hoc Mode Wireless

  (1) turn on the printer.

  (2) display the printer has six keys; three on the left (top-left, middle left, below on the left) and three on the right (top-right, centre-right, bottom-right).  Press and release the following touch buttons in order:

  top left,

  bottom-left,

  top left,

  top left.

  (3) you should see the internal menu of printers.  Press the right button down to select 'Service Menu'.  Press OK (lower-left).

  4) press the lower button right until you see "Reset Menu".  Press OK (lower-left).

  5) press the lower button right until you see "half full".  Press OK (lower-left).

  (6) after a few seconds, the printer turns off.  Press the power button to turn on the printer.  It is now reset with the correct default network settings.

  (7) turn on the radio:

  Press the Scan button to get the wireless settings

  Select wireless Menu

  Select wireless settings

  Select Enable Wireless to turn on the radio.

  Part 2 - run the Wireless Setup Wizard

  The printer has now created an ad - hoc network called hpsetup.  To connect to this network on your Mac.

  Check the connection to the printer by opening the printer's internal web page.  You can do this by opening Safari, select bookmarks then ShowAll bookmarks.  On the left pane of Safari, select Hello and on the right, you should see your printer listed.  Double-click your printer and Safari should display the printer's internal web page.

  The printer Web page, select the network tab, and then select Wireless (802.11).  Now press Start the wizard to launch the wireless configuration wizard.

  When the wizard is finished, your computer unplug the printer's ad - hoc network as the printer reconfigures itself to connect to your network home.

  Reconnect your computer to your home network.  Verify that you can connect to the printer at the opening of its internal web page again once we were doing before.

  Finally, install the printer SW.  Since you have Snow Leopard, you don't need the CD that came with the printer.  Instead, open the Print & Fax under System Preferences applet and press the [+] button.  Highlight your printer and click Add.

• Satellite P300 - 20 H cannot find a wireless connection

  Hello

  Can someone help me? My Satellite P300 - 20H can not find the wireless router.
  He works very well before both at home and work, nothing has changed, but the laptop now cannot find a connection.

  Everything works fine when I connect the ethernet cable, but as soon as I unplug NOTHING.
  The router is in the same location as always, and no electric element in surplus is around.

  I guess it must be something to do with the laptop because it is the same at home because it's a job, WITHOUT JOY.

  Thank you

  Richy.

  Ohhm man.
  There are many discussions on the problems of WiFi and I hope you read some comments here that provide some tips.
  Did you?

  Firstly it should check if the WiFi is enabled correctly.
  Activate WLan switch (LED should be lit) and use the FN + F8 to activate the WLan.
  In addition, the WLan configuration should be checked! (SSID, encryption type, password encryption, etc.)

  Last but not least make sure your WLan driver is up-to-date.

• HP LaserJet Pro CM1415fnw color multifunction printer - cannot FIND the WIRELESS NETWORKS

  PRINTER: HP LaserJet Pro CM1415fnw color multifunction printer

  OS: Windows 7

  OWNER: More than 2 years without any problem

  LOCATION/SET-UP: To my personal residence. All-in-one router through the cable company.

  QUESTION: Suddenly, printer cannot find wireless networks. Nothing has changed recently in my service provider or equipment. I know that the router and the internet is not the problem because our 2 smart phones and three laptops still not connect. I triend manually configure the network using the SSID and key phrases, but still nothing.

  Help!

  I would like to perform a hard reset by removing the power of the whole machienethrough the power cord for 30 seconds. Depending on whether I have would reconnect the printer to the wireless network and set a static IP address.

  -Spencer

• LaserJet 200 color M251MW: driver software cannot find printer wireless HP Laserjet 200

  I have printer HP Laserjet above 200. It's worked great for me and another person in my office. However, I've changed computers, and no matter what I do, the driver cannot find the printer. The other person in my office can always print very well, and my old computer can print always very well. I have disabled the firewall, turn off network security essentials (it is not yet installed antivirus software), provided the IP address, network address, the name of the device, let the software to set up my connection Wireless for HP Direct print. I restarted the printer, restarted my computer, restarted the router wireless, connected the printer directly to my computer via the supplied USB cable. It does not find the printer. I can ping to the IP address of the printer and get a quick response. I can print to other printers on network in the building, I just can't connect using HP. !

  None of that helped him. What is strange, is that when I plug the USB in, it feels immediately there is a printer is connected. It starts to install the software, asking me to acknowledge T & C before you get a read error "unable to create the folder to extract webpack". I am an administrator on this computer and the network, and he gave permission to run. However when I use the driver from HP, it cannot find the printer, even with connected USB? The HP print and scan doctor finds the printer immediately, on the network, but then try to install the same software that does not find the printer.

  I have finally however solve the problem, the key was to not install all other HP services, other than those needed to print. Deselection of all the software options (components 6-8) allowed him to immediately find the printer maybe 2 seconds, select these elements and not found the printer. HP needs to offer a thin driver that actually works, rather than trying to sell ink, just something that allows you to print would be useful. It's frustrating to spend 6 to 8 hours trying to configure a printer when the problem appears to be with the driver.

  For others with this problem, run the HP print scan doctor, download the driver again through this software, deselect all option provided with the driver software and continue.

• W7 PC on the router LAN port cannot find connected wireless OJ Pro 8500 has more router suite upgrade

  My broadband provider has replaced my internet router with a new one with dual N band Wireless LAN GigE ports and. The 8500 a printer has been successfully connected WPA Wireless and works very well with a laptop Windows 7 Sony connected wireless and Apple devices.  However neither the desktop PC connected windows 7 Dell LAN or even Sony laptop when it is connected to a router LAN port can find the printer.  I tried to reinstall the printer software with the latest version on the site of HP OJ8500_A910_1315 and the installation fails as auditor of network environment cannot find the printer. I ran the diagnostics of HP network with two firewalls in the PC and router disabled without success. The LAN itself seems to work OK as the PC can meet, Exchange files and and can access the internet.  The router has been checked by the technical uupport of the broadband service provider.  The printer is visible as a network connected device in Windows Explorer so you expect the HP software to see. The only option to set the printers IP address and use it in the installion process or is there other settings that I can change to get the HP network environment checker works correctly?  Thoughts would be appreciated.

  Thank you very much.  Unfortunately the router (a BT HomeHub4) does not have such a context, in the hub Manager, which is accessible by the user but I have now found it has the ability to set the IP address of a wireless device if I did. I reinstalled successfully on the printer to all computers.

• HP B209a cannot find the wireless network

  I'm running into a problem with my B209a find a wireless network.  I'm not well versed in wireless/network please bare with me.   I have an iMac with OS X 10.8.2.  Recently, I upgraded my router to an Airport Extreme.  My Mac can see the printer correctly, however, the printer cannot now see the network.  Airport utility, I see all our appliances listed under wireless clients and an IP address without a name (printer?).  Doesn't look like not to add manually wireless clients is no longer an option.

  The wireless is configured with WPA/WPA2 Personal Security.  The radio is set to 802. 11A / n - 802.11b/g/n (automatic).  Anyone have any ideas on how to solve this problem?  Thank you.

  1. Printer, restore the configuration of the network printer.
  2. Turn on the radio to the printer.
  3. From your Mac, connect to the network printer called hpsetup.
  4. Open Safari and select Bookmarks-> Show all bookmarks.
  5. Select Hello on the left.  Your printer should appear in the main window of Safari.
  6. Double-click the printer.  The printer's internal web page should appear.
  7. The Green Network on the printer web page tab.
  8. Select Wireless (802.11) on the left
  9. Press start the wizard and follow the prompts to connect the printer to the network.

  This should get back you on your feet.

• On my iMac running training camp. I get a message saying that my PC cannot find the wireless hub and it is unable to connect to internet Explorer. Help!

  Connection Wi - Fi with internet explorer 8

  I'm under Boot Camp on my iMac with OS 10.6.8. I am connected to the hub of my son-in-law over a wireless connection.  I can access the internet using Safari on the side of the Mac of the partition successfully, but I can't access the internet by using a wireless setup on the side of the PC of the partition by using Internet Explorer 8.  I get a message saying my side PC created by Boot Camp can not find the wireless hub and is unable to connect to internet Explorer.  Help!

  Hello

  ·          What is the version of the operating system running on your computer?

  I suggest you to install the drivers for the network card on the manufacturer's Web site and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  See: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

• Moved from Office Windows 7 from one room to the other and now it cannot find the wireless network

  Hello world

  I have a HP Pavilion running Windows 7.

  He was hooked through the ethernet in a single room.

  I moved it to another room where there was no inflexible access, so I relied on the use of our wireless network.

  Now, the computer will not even find the wireless network.  When I have the help, it says "no available connection."

  In the center of the network, selecting wireless has a red X to the left of the green signal bars.

  At first, I wondered if maybe the computer was in a "dead point" in our House, but I've put a laptop beside him and he found the thin wireless network.

  Any help?

  Update: I tried system restore and tried to stop/resume knowledge network locations, but to no avail.

  Here is the info on my card wireless directly from HP site:

  Original driver for the solutions of Dualband network Atheros 802.11 Wireless Module a/b/g/n.

  I found what I think, it's their website, (http://www.atheros.cz/atheros-wireless-drivers.php), but surprise... they only model # s, my info does not.  Ugh.

• Cannot find a wireless network with my HP Pavilion

  I really need help. I had this problem a couple of times, and every time I had to restart my entire computer and reinstall everything before I could connect again. The computer has no connection with a cable problem, but he says he can't find a Wi - Fi connection. I would really avoid the reboot and restore the computer to a fifth time if I could. I don't know the details of the computer, I think it might be a Touch 14z...

  Hi ImpossiblyOswin,

  Here is a document from HP Networking Wireless and Internet troubleshooting support with a number of troubleshooting steps to try to including buildings in the troubleshooter in Windows. This information you provided was what I was looking for. When you mention reinstall in your first post, what are you reinstall?

  Thank you

• Satellite C850-1CH - cannot find the wireless drivers to install!

  I recently bought a Toshiba Satellite C850-1CH. The sistem OS is Windows 7. I was able to install all the drivers, except a few strangers that are on network connections and I don't know where to find them! I even tried to search for them via the Windows updates, but not luck.

  Can anyone help me find these drivers: (?) Here is a picture of what I mean: http://oi50.tinypic.com/345zj29.jpg (and Yes, I installed all the drivers needed for the network/LAN/wireless, but I can't find the drivers for those!)

  Here is the list of drivers that need to be installed and of course it Johan be installed in the order given:
  Windows 7
  Chipset SW installation utility
  Intel Management Engine Interface
  Display driver
  Intel Rapid Storage Technology driver
  Realtek Audio Driver
  ATI HDMI Audio Driver
  HD SRS Premium Sound Technology
  Synaptics Touch Pad Driver
  Realtek LAN Driver
  Realtek driver LAN wireless
  Intel Wireless Display
  Filter driver package Realtek Bluetooth
  Bluetooth Stack for Windows by Toshiba
  Bluetooth monitor
  Intel USB3.0 driver
  Realtek card reader
  TOSHIBA Value Added Package
  Sleep TOSHIBA utility
  TOSHIBA resolution + plug-in for Windows Media Player
  TOSHIBA Media Controller
  TOSHIBA Media Controller plugin
  TOSHIBA Network Device ID registry tool
  TOSHIBA Web Camera Application
  PatchFiles PCIIDEREG - 1.2
  PatchFiles

  Check it please this list and install missing stuff.

  WLAN drivers, you can find the portal of Toshiba WLAN - http://aps2.toshiba-tro.de/wlan/

  If you have any other questions you are welcome.

• Equium M50-164 - cannot find a wireless switch

  Im having trouble setting up my wireless network - I get a constant message telling me wireless is not lit - for the life of me I can't find out how to do this.

  I am looking for a switch to a button or something - ive tried searching through my XP operating system, look for a switch option but have had no luck.

  any help would be appreciated.

  Cheers.

  Have you looked in the user manual? You'll find where is the wireless switch.

  The wireless switch is on the front of your laptop on the left side. The rule must switch on it otherwise the WLAN functionality is disabled.

• Vista Ultimate cannot find available wireless networks

  Fresh install of Windows Vista Ultimate on my desktop with the Linksys Wireless card can't find any available wireless network. My laptop in the same room (also Vista) detects and connects without any problems. I tried to reset the router, manually force the connection and everything else I can think. Help!

  Hello

  Remove ALL power and reinsert the card, in fact remove and replace, do not just tight.

  Search updated with LinkSys drivers and they have excellent Support and Forums.

  LinkSys - Support - Online Chat drivers
  http://homesupport.Cisco.com/en-us/Wireless/Linksys

  LinkSys - Forums
  http://homecommunity.Cisco.com/community/?category.ID=Linksys

  I hope this helps.
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Cannot find my wireless router

  IM so confused, im of the problems with my wireless router, when I connected my nintendo wii, that it worked fine, so I decided to make a secure connection by giving a password and other then on the pc finds the router, I made a password for wireless connection and then my wii wouldn't connect , and when I returned to the pc change back I couldn't find the router anywhere all that I can see is my ethernet, theres nothing no wireless adapter. but on my laptop, I can see my wireless connection, but I can't connect to the internet on this subject. IM desperate I don't much about computers know pls if use small words haha, btw, after what happened, I installed windows 7 on the pc to see if it would fix itself, but no luck.

  Hello

  The type of encryption and password must be exactly the same and fully compatible with all wireless devices that use the wireless router.

  So first connect to the router using lead wire and disable security.

  Then read this and restore security.

  Of the weaker for wireless security, more strong capacity is.
  No security
  Switch Off SSID (even has No Security. SSID can be sniffed easily even if it is turned off)
  MAC Filtering___ (Band Aid if nothing else is available, MAC number can be easily Spoofed).
  WEP64___ (Easy, "Break" by knowledgeable people).
  WEP128___ (a little more difficult to activate, but "Piraté" too).
  -------------------
  The solutions above are not considered safe.
  Safe starts here at WPA.
  -------------------
  WPA-PSK__(Very Hard to Break).
  WPA-AES__(Not functionally Breakable)
  WPA2___ (not functionally breakable).

  Note 1: WPA - AES the current interpretation level entry of WPA2.

  Note 2: If you use WinXP SP3 bellows and not updated, you need to download the fix from Microsoft WPA2. http://support.Microsoft.com/kb/893357

  Documentation of your devices (router wireless and computer wireless card) must indicate the type of security that is available with your wireless hardware.

  All devices MUST be set to the same level of security using the same password.

  Therefore, security must be set according to what is the best possible one of the wireless devices.

  I.e. even if most of your system may be able to be configured to the maximum with WPA2, but a device is able to be configured for maximum of the WEP Protocol, to the whole system must be configured to WEP.

  If you need more security and a device (such as a wireless card that can only do WEP) is now better security for the entire network, replace with a better device.

  Definition of wireless security - http://www.ezlan.net/Wireless_Security.html

  Jack MVP-networking. EZLAN.NET