Cannot find the bookmarks service organize since the upgrade to 4
Just upgraded to Firefox 4 and find there's any position of "Organize bookmarks" under "bookmarks".
"Organize bookmarks" has been renamed to "show all bookmarks" in the bookmarks menu.
Tags: Firefox
Similar Questions
-
What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000
Hello
1. Since when are you facing this problem?
2. What is the number of brand and model of the computer?
3. have you made changes on the computer recently?
BCM42RLY is a Broadcom network card driver. I suggest that you uninstall and reinstall the drivers and check if it helps.
Uninstall or reinstall a device: http://technet.microsoft.com/en-us/library/cc725782.aspxHope the information is useful.
-
Satellite A665 - 12K: BT does not work - cannot find the remote service
Hello!
Help solve the problem,
Computer laptop A665 - 12 k connected via bluetooth devices, bluetooth Manager finds the device, but do not connect it gives an error 'Cannot find the remote service' before you reinstall windiws solved similar problems 7. Did you reinstall driver broadcom, resettlement (ver.8, ver.9) bluetooth stack, clean the registry, windows 7 the relocation does not contribute to what either.. .Please help!
Hello
I recommend you to check the services that are running in the background.
The point is that if BT service is not running or is not enabled, the BT connection cannot be established.To check the service appointment on: Control Panel-> administration-> computer management tools
or you can directly open the Services' list by typing services.msc command in RUN or Start Menu search box.No, you will get a list of available services. Search for services called Bluetooth and activate this service by double-click a service and select the option you want.
Then try to reactivate the BT using the FN + F8 key combination
-
I tried all of the suggestions posted and have had no success in restarting my print spooler. Help, please.
Original title: I tried to restart the print spooler as directed, and he returned the error 2: the system cannot find the specified file. He does that and is it fixable?
@Winston Microsoft M committed Support Engineer 'expert '.
I can see your response that you did take the time to reproduce the problem and then try your own ideas to check if the problem persists.
Here is what I suggest to you, so you can learn how XP actually works:
Start in the XP Recovery Console or Safe Mode, so Windows File Protection does not run.
Rename your file c:\windows\system32\spoolsv.exe you can remember (such as spoolsv.bak). Now, the file is "absent".
Restart normally.
Then try to start the Print Spooler Service and you will see the error.
So why don't you follow your own advice and run SFC and troubleshooting automated (as you suggested) and check if the problem persists.
Please report your results.
When you see that it does help and that SFC does not replace the missing or damaged file (in the system32 folder) and that the automated troubleshooter does not help, will sing it a different song (we hope).
Don't forget to rename your spoolsv.bak to spoolsv.exe when you're done messing around autour.
-
I am trying to install SP3 on my XP Pro. I get a notice on my screen, stating: "Service Pack 3 Setup error - the system cannot find the file specified." Don't know what I'd do. Thank you. Peter glass
That's good news. I think you also need to analyze of rootkits being on the right side. So, now:
Search for rootkits with a program SPECIALLY designed to detect and remove the (aswMBR):Download this file to your desktop. Double-click the icon to run the program. When the opportunity to download and install the latest Avast definitions do.Run a scan. Results in red indicate that this was not a false positive! Do you need to remove the rootkit (including "FixMBR" if necessary).And finally, leave your PC on overnight and search for viruses, using this site:Once we are convinced that your PC is clean, here are my instructions (just in case where you still cannot run batch of Geek-Tech file, etc.):1. download the installation of SP3 and IE8 (beforehand) files. I prefer to keep these (and other useful files) on a USB key, but this is optional. Here are the links for the installation files:
http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)
(You can TOTALLY ignore the message "intended for it professionals"!)
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)
(You need to install IE8 AFTER SP3! Trust in me.)
IMPORTANT NOTE!
It is VERY important to ensure that Internet Explorer is at the level IE6 before installing SP3. In case you have IE7 or IE8, you must uninstall it / them, using the Control Panel Add / Remove programs. Let us know if you need assistance with this.
Once again:
Make sure that IE is IE6 level before installing SP3. You can go directly from IE6 to IE8 after SP3 has been installed.
2. disconnect Internet. Also unplug all unnecessary devices.
3. temporarily disable the automatic updates. To do this:
Start | Control Panel (switch to Classic view if not already selected). Automatic updates
4 set up a clean boot. The last thing you need is for a program that runs in the background to interfere with these updates! (It happens!) For more information:
http://support.Microsoft.com/kb/310353
(Note that this is the same as setting up a "Diagnostic boot.")
Reset.
5 install the SP3. Restart TWICE.
6 switch to IE8. Restart TWICE.
(What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).
7 unscrew the clean boot. (That is, return to the Normal startup).
8 make sure that firewall Windows is activated (it should already be):
Start | Control Panel | Security Center
9 visit Windows Update to download and install only the critical security updates. Restart each time you are prompted.
10 re - enable automatic updates.
-
My computer starts rather suddenly gel with many applications. Today it froze again once I finished a long email and was about to send. I lost him of course. My Event Viewer was the topic. Event 7000, Service Control manager Eventlog.
What can I do? I have Vista SP2 64-bit.
I'll add that the kernel_driver of Type 1 mcstrm following 1 State arrested Win32_exit_code 2 <0X2>Wait_hint Checkpoint 0 x 0 0 x 0
Please... any help to fix... my computer keeps freezing. and I will need to get a new laptop or an Ipad, if the problem persists.
Thank you
Candy C:\Users\David> net helpmsg 2
The system cannot find the specified file.
Is that error on this post code, IE something deleted, probably your antivirus or you.
For problems to explore, which has nothing to do with this post, try this (which covers almost any problem).
Explorer
Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).
To see if a fix is available
In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution.
You can also right-click and choose Details for more information. Post these details here. The name of the Module fault is important information.
If the problem affects Panel press the Windows key + R and type wercon (or type it at a command prompt).
Close the browser and start a command prompt
- Close Windows Explorer
- Start - All Programs - Accessories - right on command prompt and choose run as administrator.
- Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
- Press Ctrl + Alt + Delete then Task Manager.
- Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.
Then to restart the Explorer after trying all of the following
- Press Ctrl + Alt + Delete and choose Task Manager
- In the Task Manager, click the file menu and then click new task (run) and enter explorer
If you cannot start the Explorer at all
- Press Ctrl + Alt + Delete and choose Task Manager
- Under the processes tab, click Show processes from all users to elevate to administrator
- In the Task Manager, click the file menu and then click new task (run) and type cmd
- Other things you can try typing
Explorer
Explorer c:\
Explorer/e, c:\
wercon
control
Iexplore
Rstrui
If you cannot start a folder window you can use the Browse button in the new task dialog. Don't forget that you must right click and choose Open rather than double-clicking.
Reregister the shell registry entries
It is important that each order is accepted. If the command fails it means the file is damaged and must be repaired.
Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
regsvr32 /i shell32
regsvr32 /i urlmon.dll
regsvr32 RPCRT4.dll
regsvr32 PROPSYS.dll
regsvr32 MSCTF.dll
regsvr32 cscui.dll
regsvr32 rsaenh.dll
regsvr32 timedate.cpl
regsvr32 ATL DLL
regsvr32 OLEACC.dll
regsvr32 actxprxy.dll
regsvr32 USERENV.dll
regsvr32 msshsq.dll
regsvr32 NaturalLanguage6.dll
regsvr32 thumbcache.dll
regsvr32 WINTRUST.dll
regsvr32 MMDevAPI.DLL
regsvr32 audioses.dll
regsvr32 audioeng.dll
regsvr32 ExplorerFrame.dll
regsvr32 msi.dll
regsvr32 FirewallAPI.dll
regsvr32 netshell.dll
regsvr32 pnidui.dll
regsvr32 QUtil.dll
regsvr32 c:\windows\system32\wpdshserviceobj.dll
regsvr32 WINHTTP.dll
regsvr32 C:\windows\system32\qagent.dll
regsvr32 C:\windows\system32\portabledeviceapi.dll
regsvr32 wbemprox.dll
regsvr32 wbemsvc.dll
regsvr32 fastprox.dll
regsvr32 imapi2.dll
regsvr32 wshext.dll
regsvr32 gameux.dll
regsvr32 msxml6.dll
regsvr32 vbscript.dll
regsvr32 jscript.dll
regsvr32 wshext.dll
regsvr32 wshom.ocx
regsvr32 wshcon.dll
regsvr32 scrrun.dllDelete the folder and the settings of the Menu
This will remove the settings are saved for each file that you visit. Also the order of the start menu and pinned list settings.
Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
Reg delete "HKCU\Software\Classes\Local Settings\Software\Microsoft\Windows\Shell" /f
Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Streams" /f
Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StuckRects2" /f
Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StartPage" /f
Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\MenuOrder" /f
Delete the thumbnail and icon Caches
Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
attrib - r s h '% userprofile%\AppData\Local\*.db '.
attrib - r s h '% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db '.
del "% userprofile%\AppData\Local\*.db".
del "% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db".
Disable thumbnails and previews
Damaged documents and particularly corrupt pictures or videos, can cause Explorer crash all trying to generate a thumbnail or an overview. This miniature and previews active option off.
If you can start the Explorer, previews is Union on the command - folder and Search Options - framework of tasks use classic Windows foldersbar.
Thumbnails are organized on the command bar - folder and Search Options - view tab - and check under Advanced settings - always show icons, never thumbnails and uncheck Show icon file in the pictures.
If you cannot start the Explorer close Explorer as above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000001 f
Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000000 f
Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000000 f
Turn around after testing the Explorer.
Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000000 f
Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000001 f
Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000001 f
A boot is a way to explore
It can be caused by a shell extension.
Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).
The Explorer is built on addin programs called Extensions of Shell. The standard is provided by Microsoft, but programs add their own.
- Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
- Close Windows Explorer
- Start Autoruns by right-clicking and choose run as administrator
- Click on the menu Options - Filter Options and check hide Microsoft entries and disable include empty locations
- Go to the Explorer tab and uncheck everything to the left.
- Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
- Press Ctrl + Alt + Delete and choose Task Manager. Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.
- Click the file menu and then click new task (run) and enter explorer
If this can help, reactivate ½ at a time to identify those who. If this does not help, restart AutoRuns and go to the all tab and uncheck everything that it and restart. If this can help, reactivate ½ at a time to identify those who.
Run Microsoft Fixit
Microsoft has a range of automatic programs to solve common problems. To see problems explore
http://support.Microsoft.com/mats/windows_file_and_folder_diag/en-us
For the visit of the list the most comprehensive
http://support.Microsoft.com/FixIt/en-us
When you choose to download, choose the option to run on another computer. You can then save it to your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.
Recycle BinIf the problem is the trash bin remove the storage folders. It will be automatically re-created next time you delete a file or open the Recycle Bin. It will remove the trash and the files it contains for all users.Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).RD C:\$RECYCLE. BIN/s/qthen repeat for each drive to change the drive letter, for exampled:\$recycle Rd. BIN/s/qe:\$recycle Rd. BIN/s/qIf the Office does not startThis will create a new empty by user and common desktop computer. This will allow to test if a file on your desktop to start the Explorer.Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).MD "% userprofile%\DesktopTest".Add reg "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" / v/t desktop REG_EXPAND_SZ /d "% USERPROFILE%\DesktopTest" /fMD "% public%\desktopTest".Tracking Add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" v "Common Desktop" REG_EXPAND_SZ /d "% Public%\DesktopTest" t fTo restore default after having tested if begins to explore.Set ExpFix1 = % userSet ExpFix2 = % profilereg add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" / v/t desktop REG_EXPAND_SZ /d "% ". ' ExpFix1 ExpFix2%% \Desktop "/fSet ExpFix1 = % PubSet ExpFix2 = % licreg add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v "Common Desktop" /t REG_EXPAND_SZ /d "% ". ' ExpFix1 ExpFix2%% \Desktop "/fYou will need to disconnect then.New entry missing folderIf the above does not help.Download NewFolder.reg from https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA 121.Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the NewFolder.reg. -
Log name: SystemSource: Service Control ManagerDate: 17/07/2011-21:12:53Event ID: 7000Task category: noLevel: errorKeywords: ClassicUser: n/aComputer: ivan-PCDescription:The BCM42RLY service failed to start due to the following error:The system cannot find the specified file.The event XML:
7000 0 2 0 0 0 x 80000000000000 203523 System Ivan-PC BCM42RLY%%d Kooriginal title: can someone please help...Hello
1. you are using a Dell computer?
2. What is the model number of your computer?
3. don't you make changes to your computer before the problem?BCM42RLY is a broadcom driver. I suggest that you uninstall and reinstall the drivers.
-
Yesterday, I downloaded and installed updated Creative to my its Soundblaster card from Windows Update. It lead me to a large download of Creative for its console related sound and SW, and things worked fine. When I restarted this morning, there was a horrible loud hum while Windows was loading, and I made a hard stop. When I rebooted, the buzz was gone, but the icon in the status bar indicates that the sound was off. The sound message indicates that the audio service is not running. I tried to restart the computer several times, but the results were the same. I tried to restart the audio service of the Task Manager, but got an error message 0 x 80070002, the system cannot find the file specified. Where should I go from here?
Hi Jfklinger,
This problem occurs because some legacy applications use files or components that were developed prior to Windows Vista. The names of these audio components may be different in Windows Vista. If the calling application uses the hard-coded file names, the new files and components could not be found.
To resolve this problem, use one of the following methods to change the audio settings for a device.
Method 1: use the order Volume of Windows
To use the Volume of Windows command to change the audio settings for a device, follow these steps:
1.right - click on the speaker icon in the notification area, and then click devices recording or reading.
2. double-click - click the device for which you want to set the parameters. For example, double-click on Microphone.
3. click on the levels tab.
4. move the cursor upwards or downwards to set the desired volume level, and then click OK.Method 2: use Control Panel
For control panel allows you to change the audio settings for a device, follow these steps:
1. click on Start, click Control Panel, click hardware and soundand then click sound.
2. click on the tab playback or recording .
3. double click the device for which you want to set the parameters. For example, double-click on Microphone.
4. click on the levels tab.
5. move the cursor upwards or downwards to set the desired volume level, and then click OK.You may receive an error message when you run an application that uses the recording feature or audio playback in Windows Vista
http://support.Microsoft.com/kb/930095Previous post: the result.
Bindu S - Microsoft Support
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]
-
This seems to have started with the last batch of updates of Windows 7 (including SP1).
I can't connect using dial-up. Get the message:
Cannot load the Remote Access Connection Manager service
Error 711: The operation could not complete because it could not start the remote access connection manager service
in time. Please try the operation again.When I try to start the Remote Access Connection Manager service manually, I get the message:
Windows could not start the service on Local computer remote access connection manager.
20 error: the system cannot find the specified device.My phone displays the modem works properly, and telephony and the Secure Socket Tunneling Protocol service started.
I don't know what else might have changed.
Hello Vince_867,
Thanks for your post. Take a look at this thread for a possible solution to your problem.
See you soon
-
Cannot find the WSDL service defined for the name of the service
Hello! I made that call on the other composite via MDS on a single instance. Everything works fine. I've deployed this composite 2 to another instance, updated MDS. And I got error in the composite test 1st 2nd call. You have an idea? Thank you.
EM error
" < bpelFault > < faultType > 0 < / faultType > < remoteFault xmlns =" http://schemas.Oracle.com/BPEL/extension "> < part name ="detail"> < could not find the service WSDL defined for the name of the retail service > {http://xmlns.oracle.com/EnterpriseServices/Core/ShipmentAdvice/V1}. CreateShipmentAdviceService. Please make sure that the port attribute to the binding defined in the composite file is correct by checking the service name and namespace in the element #wsdl.endpoint. Also, check that the WSDL file for binding namespace is imported and is currently accessible (check import at the top of the composite file nodes). Finally, to validate the parameters of HTTP proxy for the server. < / details > < / part > < a name = "summary" part > < summary > oracle.fabric.common.FabricInvocationException: could not find the service WSDL defined for the service name {http://xmlns.oracle.com/EnterpriseServices/Core/ShipmentAdvice/V1} CreateShipmentAdviceService. Please make sure that the port attribute to the binding defined in the composite file is correct by checking the service name and namespace in the element #wsdl.endpoint. Also, check that the WSDL file for binding namespace is imported and is currently accessible (check import at the top of the composite file nodes). Finally, to validate the parameters of HTTP proxy for the server. < Summary / > < / part > < part name = "code" > < null code > < / code > < / piece > < / remoteFault > < / bpelFault >
SOA-server - diagnostoc.log
Handle error message.
error while trying to process the message 'com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessage '; the reported exception is: block cannot handle the exception.
failure of the block 'BpPrc0' to handle an exception of business for instance '350026'; reported exception is: faultName: {{http://schemas.oracle.com/bpel/extension} remoteFault}
messageType: {{http://schemas.oracle.com/bpel/extension} RuntimeFaultMessage}
parts: {}
detail = < detail > cannot find the WSDL service defined for the service name {http://xmlns.oracle.com/EnterpriseServices/Core/ShipmentAdvice/V1} CreateShipmentAdviceService. Please make sure that the port attribute to the binding defined in the composite file is correct by checking the service name and namespace in the element #wsdl.endpoint. Also, check that the WSDL file for binding namespace is imported and is currently accessible (check import at the top of the composite file nodes). Finally, to validate the parameters of HTTP proxy for the server. < / details >
, summary = < summary > oracle.fabric.common.FabricInvocationException: could not find the service WSDL defined for the service name {http://xmlns.oracle.com/EnterpriseServices/Core/ShipmentAdvice/V1} CreateShipmentAdviceService. Please make sure that the port attribute to the binding defined in the composite file is correct by checking the service name and namespace in the element #wsdl.endpoint. Also, check that the WSDL file for binding namespace is imported and is currently accessible (check import at the top of the composite file nodes). Finally, to validate the parameters of HTTP proxy for the server. < / Summary >
code = < code > < code > null}
This error exceptions thrown by the underlying routing system.
Contact Oracle Support Services. Provide the error message, the composite source and the trace of the exception in the log (logging level value debug mode) files.
This error was an exception that is thrown by the message handler.
Check the trace for the exception in the log (the connection value level debug mode).
ORABPEL-05002
Handle error message.
error while trying to process the message 'com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessage '; the reported exception is: block cannot handle the exception.
failure of the block 'BpPrc0' to handle an exception of business for instance '350026'; reported exception is: faultName: {{http://schemas.oracle.com/bpel/extension} remoteFault}
messageType: {{http://schemas.oracle.com/bpel/extension} RuntimeFaultMessage}
parts: {}
detail = < detail > cannot find the WSDL service defined for the service name {http://xmlns.oracle.com/EnterpriseServices/Core/ShipmentAdvice/V1} CreateShipmentAdviceService. Please make sure that the port attribute to the binding defined in the composite file is correct by checking the service name and namespace in the element #wsdl.endpoint. Also, check that the WSDL file for binding namespace is imported and is currently accessible (check import at the top of the composite file nodes). Finally, to validate the parameters of HTTP proxy for the server. < / details >
, summary = < summary > oracle.fabric.common.FabricInvocationException: could not find the service WSDL defined for the service name {http://xmlns.oracle.com/EnterpriseServices/Core/ShipmentAdvice/V1} CreateShipmentAdviceService. Please make sure that the port attribute to the binding defined in the composite file is correct by checking the service name and namespace in the element #wsdl.endpoint. Also, check that the WSDL file for binding namespace is imported and is currently accessible (check import at the top of the composite file nodes). Finally, to validate the parameters of HTTP proxy for the server. < / Summary >
code = < code > < code > null}
This error exceptions thrown by the underlying routing system.
Contact Oracle Support Services. Provide the error message, the composite source and the trace of the exception in the log (logging level value debug mode) files.
This error was an exception that is thrown by the message handler.
Check the trace for the exception in the log (the connection value level debug mode).
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:238)
at com.collaxa.cube.engine.dispatch.BaseDispatchTask.process(BaseDispatchTask.java:89)
at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTask.java:65)
to java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:897)
to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:919)
to com.collaxa.cube.engine.dispatch.Dispatcher$ ContextCapturingThreadFactory$ 2.run(Dispatcher.java:933)
at java.lang.Thread.run(Thread.java:738)
]]
Hello
In the em console, against you call composite (I meant first composite), could you click on the "Show XML definition" (right next to the ' Show WSDL and endpoint URI) and see if correct endpoint URI is set up for the 2nd composite?
-
C4780 cannot find the wireless router
I have a new iMac and old Toshiba that is running Windows XP and you use a Netgear wireless router. When I got to the printer, it worked fine on the wireless network. Bought a new router that I couldn't work with the Mac and the PC so I returned to my original router. Now, the printer does not work as a wireless printer. Summaries of diagnosis indicates that the printer cannot find the wireless router and fails under "Network Name (SSID) Found." On the Network Setup page, my network is listed as a network discovered by the printer. I guess there is a simple solution and hope to find the answers here.
Thank you very much!
Some printers C4780 left the factory with a default misconfiguration. This could be the reason why you can not see the hpsetup network. Here is an updated set of instructions for manually adding the C4780 to a Mac:
Part 1 - Get the printer in Ad-Hoc Mode Wireless
(1) turn on the printer.
(2) display the printer has six keys; three on the left (top-left, middle left, below on the left) and three on the right (top-right, centre-right, bottom-right). Press and release the following touch buttons in order:
top left,
bottom-left,
top left,
top left.
(3) you should see the internal menu of printers. Press the right button down to select 'Service Menu'. Press OK (lower-left).
4) press the lower button right until you see "Reset Menu". Press OK (lower-left).
5) press the lower button right until you see "half full". Press OK (lower-left).
(6) after a few seconds, the printer turns off. Press the power button to turn on the printer. It is now reset with the correct default network settings.
(7) turn on the radio:
Press the Scan button to get the wireless settings
Select wireless Menu
Select wireless settings
Select Enable Wireless to turn on the radio.
Part 2 - run the Wireless Setup Wizard
The printer has now created an ad - hoc network called hpsetup. To connect to this network on your Mac.
Check the connection to the printer by opening the printer's internal web page. You can do this by opening Safari, select bookmarks then ShowAll bookmarks. On the left pane of Safari, select Hello and on the right, you should see your printer listed. Double-click your printer and Safari should display the printer's internal web page.
The printer Web page, select the network tab, and then select Wireless (802.11). Now press Start the wizard to launch the wireless configuration wizard.
When the wizard is finished, your computer unplug the printer's ad - hoc network as the printer reconfigures itself to connect to your network home.
Reconnect your computer to your home network. Verify that you can connect to the printer at the opening of its internal web page again once we were doing before.
Finally, install the printer SW. Since you have Snow Leopard, you don't need the CD that came with the printer. Instead, open the Print & Fax under System Preferences applet and press the [+] button. Highlight your printer and click Add.
-
P1102w - cannot find the printer
Hello
I'm unable to print using a wireless connection.
the printer is p1102w.
operating system is MAC OS 10.10 Yosemite
Whenever I try to print something I get "printer is not connected / cannot find the printer" message.
I tried the solutions on your support site, but nothing helped.
For sure, printer is connected to the same network as the computer. I see it on the print configuration page and I can connect to its IP address via a web browser (but I can't use web services).
All software and drivers are up to date. Update Apple is nothing new to me. Niether have your site.
I tried to move the printer closer and further away from router. No results.
No web proxy is related to my network.
To make this work, I have to remove the printer from my system, reinstall it using the USB cable, and then add it again via wi - fi.
But some time the problem reappears.
It's really frustrating. Help, please.
Hi @xopot ,
I see that you have problems printing via wireless network. I would like to help you today.
Since you can access the printer embedded Web server, the printer would have a valid IP address. Most likely, it has something to do with the software that the printer uses.
Fix permissions of the drive on the Mac:
Close all applications.
In the Apple menu, click OK, click Applications, and then click utilities.
Double-click disk utility.
Highlight your hard drive / partition on the left.
Click on check and then repair disk permissions.
Restart the computer...
Reset the printing system:
Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.
Click on the Apple icon and then click on System Preferences.
Click on Printers & Scanners.
Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.
Click OK to confirm the reset.
Type the name and the correct password.
Click OK to reset the printing system.
Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.
Configure a static IP address for the printer.
The printer is not found during Installation wireless.
Do not take into account the title. Select the Solution 4: assign your printer a static IP address.
If you need help, let me know.
Have a great day!
Thank you. -
After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer. Also I can't 'manage' my computer because I do not have "permissions". I tried a fix he 45071 and it did nothing.
Applications, (Norton and McAfee) (including free evaluation versions are notorious for not not upgrade (or uninstalling) itself.) If NIS has been installed for 3 years, you have NIS update at least once and maybe twice (e.g., NIS 2009 > NIS 2010 > NIS 2011).
[You may want to print these instructions for reference offline. If a step said to reboot, reboot.]
1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe
2. close all open applications (that is, anything with an icon on the taskbar).
3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) viaControl Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).
4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.
NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!
5. right click on the file that you saved in step #1 above, and then select run as administrator. DO TAP not your keyboard until the race ends, then restart.
6. do a clean install of NIS 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN
NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.
8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.
9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]
10. restart once again & test.
NB: Installation KB971029 disables AutoRun/autoplay on USB connected but not 'brilliant media' external drives (i.e., CDs & DVDs). See http://blogs.technet.com/b/msrc/archive/2011/02/08/deeper-insight-into-the-security-advisory-967940-update.aspx
~~~~~~~~~~~~~~~~~~~~~~~~
[1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
"Safari cannot find the server.
I have not had this happens in another version of Safari, but since the update more recent (9.1.1 on May 17, 2016), I get the following message several times a day: "Safari cannot find the server. Refreshing the page does not help. After I visit some other sites, I am able to connect to those that I had a problem with. Most of the information I could find going back five or more and seems not applicable. It is not necessarily the same sites that don't load. It is random and occurs throughout the day. It's annoying and sometimes embarrassing, but I'm dealing with it (I didn't wish)!
Does anyone else have this problem? Is this a bug in the latest version of Safari and there at - it an easy fix? Any advice will be greatly appreciated.
Thank you.
Hello
Could be a cookie problem...
In your Safari menu bar, click Safari > Preferences then select the Privacy tab, then click: delete all data Web site
Quit and then restart Safari to test.
-
Cannot find the app on my HP Officejet Pro 8500 a eFax
Cannot find the app on my HP Deskjet Pro 8500 a eFax. For the eFax Webside only the eFax more and Pro services are available.
The eFax free service not exisst more?
See you soon
Michael
Hi Michael,
The eFax service is not available for any model of printer.
The only models currently supports the eFax App are HP Photosmart C510, HP ENVY 110 and HP Photosmart 7510.
In addition, the eFax App was never offered for an all-in-one containing a physical analog fax card.
Maybe you are looking for
-
The latest in iTunes seems to work fine except when I go out, when it crashes. Is this a general problem that meet people? I use 10 64-bit windows Tony
-
Is it smart to play games like World of Warcraft on a macbook pro 13'
Hello I'm new to this forum, because I just bought a Macbook Pro 13' of 2015. I used to play games on a computer with windows laptop, but I bought a Macbook Pro for my work and study. I want to play games, but only if its not harmful for my Macbook.
-
Hello! Tell please how can I find and download visual basic 2010 or 2012 or 2015?Help, please. I'm stuck. I have not found the files to download!
-
HP laptop (Vista Home Premium) won't wake up mode 'sleep'
My HP Pavilion dv6910us laptop will follow the recommended power options and enter "sleep mode", as you want it or made-to-order... among the STARTUP options or by closing the lid. However, once he is in "sleep" mode it won't wake up. The LED on th
-
URGENT! screen freezes!
a couple of weeks, that my laptop one year old has been works perfectly when the screen suddenly out obscured / crashed, and no matter what I did, the screen doesn't come back on... I connected my laptop to an external moniter and it worked perfectly