cannot find the calendar which is essential!

Similar Questions

• When I try to rip a cd windows media player says it cannot find the file, which is ridiculous because I am trying to create a file not find a.

  When I try to extract a cd windows media player says it cannot find the file, which is ridiculous because I am trying to create a file not find a.  I do not have this cd in my library and in the menu options it won't let me change the location to extract the music, which is empty. There is error C00D1197. I also ran the store and reset the settings, but the problem is still there. My windows media player is updated as well. How can I fix this so I can copy a cd?

  Hello

  1. what Troubleshooter you speak?

  2 have had any changes made to the computer before the show?

  Please follow the steps in the link.

  Windows Media Player C00D1197 error

  http://Windows.Microsoft.com/en-us/Windows7/C00D1197

• Now that I've installed Windows 7, I can't find the calendar I had in Vista is possible that I can get back there has been much important information?

  Not able to find the calendar which was in Vista, now that I have installed Windows 7 is there a way to find it?

  See this previous discussion: http://social.answers.microsoft.com/Forums/en-US/w7desktop/thread/5d5c1a24-e226-4700-bdf2-018aafd4f056 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I use Windows 7 on a computer to which a printer is connected directly by a USB cable. I am able to print, but cannot find the printer when I run control/devices and printers Control Panel

  I use Windows 7 on a computer to which a printer is connected directly by a USB cable.  I am able to print, but cannot find the printer when I run control/devices and printers Control Panel. In fact, no devices appear at all.

  Can someone help me with this?

  Thank you.

  See http://www.winhelponline.com/blog/fix-devices-and-printers-completely-empty-windows-7/

  If this does not help, there is a very long thread here, which may include other suggestions--> http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/devices-and-printers-dialog-box-empty/353707a4-bcb0-4334-98bc-aab84747fecd?page=1

• Please help to cancel my subscription of single-app creative cloud for Acrobat Pro (at least) which has been subscribed by mistake and now I am penalized for her 3 months. Cannot find the plan tab Cancel in adobe India website

  Please help to cancel my subscription of single-app creative cloud for Acrobat Pro (at least) which has been subscribed by mistake and now I am penalized for her 3 months. Cannot find the tab cancel the plan to manage the website of adobe India tab. Help, please...

  Cancel your membership Adobe Creative Cloud

• cannot find the table name of the multiple tables which has more columns.

  Hello
  
  I'm trying to find the NAME of the TABLE from multiple tables which has more columns. I can't count the number of columns in the table, but cannot find the name of the table that has larger columns in other tables.
  
  SELECT TABLE_NAME, COUNT (*) FROM THE USER_TAB_COLUMNS WHERE TABLE_NAME LIKE '% LOC' GROUP TABLE_NAME
  
  
  Thank you.

  in SQL, you can try this:

  var v_name varchar2(40)
  
  begin
     with
        subq1 as ( select table_name, count(*) as column_count from user_tab_columns where table_name like 'FIBER%'
                       group by table_name
                       order by count(*) desc )
     select table_name
       into :v_name
      from subq1
     where rownum = 1;
  end;
  

  To get the result:

  select :v_name from dual
  

  The clause "with" brings together all the tables and ordered them all first, by the greatest number of columns
  The final query uses the rownum restriction so that it takes the first name from the table of results of the subquery.

  The restriction of rownum also exactly guarantees a result each time so that it will work with the variable binding.

  RP

• Cannot open the calendar

  I used the calendar in the works for several months; recently, when I try to open, I read, 'works cannot find the files needed to open the calendar.  The files may have been lost or changed.  Try to uninstall and reinstall the program' or words to that effect.  I uninstalled and reinstalled, with firewall disabled, but still the same message.  I also tried "System Restore" but this hasnever worked on my machine - HP Pavillion. I don't know which files may be missing, or why they disappeared, but all my appointments are in the calendar.  XP Media center, service Pack3 installed running.  Norton Utilities and Norton network security.  The problem of the timing could coincide with first "registry cleanup" with Norton - not sure.  Please help, I don't know when my grandchildren next birthday is or if I have a future doctor's appointments.

  If your computer has Norton Antivirus or Norton Internet Security, you must disable Norton product Tamper Protection before you run the system restore.

  If this does not help, I recommend you post your question in the forum PhotoDraw, FrontPage, and works .

  Boulder computer Maven
  Most Microsoft Valuable Professional

• "The system cannot find the specified file" error when you try to install a hotfix/cab package using the DISM tool Package Manager

  I'm testing the integrity of the addon ".cab" packages and patches by installing using the Package Manager (pkgmgr.exe), or alternatively, the Deployment Image Servicing and Management Tool (DISM.exe) for Windows 7.  To do this, I am aware that I have to call a tool through the command line.

  In the Package Manager, I use the syntax

  Command prompt > pkgmgr.exe /ip /m:C:\Test\test.cab

  Otherwise, I might add the path in quotes:

  "Command prompt > pkgmgr.exe /ip /m:"C:\Test\test.cab.

  The error returned in pkgmgr is:

  Operation failed with 0 x 80070002.  The system cannot find the specified file.

  My first impression was that my syntax is incorrect, although I can't have room for error.  The path points to "test.cab" which is a renamed windows addon that contains the necessary file "svcpack" and the file "entries_XX.ini".  I used several different ".cab" file, that which some I know to be genuine, hopefully exclude the possibility of a corrupted or incompatible file.  I also tried this procedure on different computers and received the same error code, so I doubt that the tool pkgmgr istelf is corrupt.

  Finally, I tried an alternative Windows 7/8 DISM tool to try to achieve essentially the same task by using the following syntax in a command prompt:

  "Commnand prompt > DISM.exe / Online /PackagePath:"C:\Test\test.cab Add-Package ".

  This produces a similar error:

  An error occurred trying to open it - C:\Test\test.cab error: 0 x 80070002
  Error: 2
  The system cannot find the specified file.
  The DISM log file can be found at C:\Windows\Logs\DISM\dism.log

  I'm really not sure why I produce these errors.  Any idea is appreciated.

  Hello

  Thanks for posting your question on the Microsoft Forum.

  I suggest you to ask your question in the TechNet forums.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking&filter=AllTypes&sort=lastpostdesc

  TechNet is watched by other computing professionals who would be more likely to help you.

  I hope this helps.

  _________________

  Thank you best regards &,.

  Isha Soni

• Cannot find the computer IPod Nano

  Original title - I Pod Nano

  When you try to connect my new I Pod Nano to my computer which runs windows 8, it essentially says that it cannot find the I Pod.  Any ideas?  I installed I tunes, uninstalled and installed again.  No luck.

  Hi Judy,.

  I suggest you try the steps from the following link:

  iPod not recognized in my computer and in iTunes for Windows
  http://support.Apple.com/kb/ts1369

  Note: Make sure that you reset the computer to normal mode, once the troubleshooting is complete.

  iOS: device not recognized in iTunes for Windows
  http://support.Apple.com/kb/ts1538

  I hope this helps! Let us know if you have other problems with Windows in the future.

• Cannot find the function edit that was on my old computer and firefox. When you click the Firefox icon, you can collect the text that has been deleted.

  Cannot find the function edit that was on my old computer and firefox. When you click the Firefox icon you can extract the text that was deleted by accident.

  Hello, you can press the alt key to display the menu bar with the Edit menu temporarily. or you can press ctrl + z which is the shortcut for "undo"...

• Re: Windows 8.1 - Windows cannot find the new updates

  Hello

  I want to update some updates of Windows 8, but it says that Windows cannot find the new updates, problem code 80070003. IM desperate, I tried many sites and forums but nothing helps!

  Thanks for the replies

  Hello

  Can you please tell us which laptop model you have and what operating system are you using?
  If I understand you right, you have improved your Win8.1 machine and now you have problems to install the Windows updates.
  Is this correct?

• Satellite T110-11U - cannot find the router WLAN

  Hello

  I have a Toshiba Satellite T110-11U. Have had since February and loved it-fortunately it wireless used throughout the House. Then one day on a month, unless I was in the same room that the wireless router, Wireless does not work. I have 2 other laptops (and iPhone) which still connect wirelessly throughout the House and the garden without problem.
  As you can imagine, it was very strange. When I take in the garden, my other laptops are all networks wireless in the region, but my Toshiba can't find any.

  Suspecting it was a driver problem, I made sure that the wireless drivers are up-to-date. With no joy, I got the system as it was at the time of purchase (do a complete restoration by interupting, starting and leaving the hard drive to be deleted and reinstalled etc.). Still the same problem. I even changed the rooms in which the router is, and the same problem - the Toshiba cannot find the router unless the router is located a few meters from the laptop.

  Until I lose the will to live, can anyone suggest the cause of my problems, or is it time I admitted defeat and brought back to the Comet under warranty (where likely test next to a wireless router and tell me everything is fine!).

  Thank you very much

  Steve.

  Hey Buddy,

  Did you check if the wireless network card is recognized correctly in the Device Manager? There may be a yellow exclamation or unknown device. Try also updating the driver WLAN from Toshiba Web site:
  http://APS2.toshiba-tro.de/WLAN/

  See all other WLAN routers?
  The wireless network card can be activated using a combination of keys FN + F8 and in the BIOS. In the BIOS, you should also load default settings and test again.

• Photosmart C4780 installation fails at the "system cannot find the file specified."

  My problem began simply with your printer, a HP Photosmart C4780, who has always had a wireless connection and would not print.  Initially, the checked network connection fine control panel of the printer.  I ran a Microsoft printer troubleshooting, which found a block in line print and authorized.  The first test page print, but did print the "internal test page.  I did not understand what it meant, so I looked for help on the HP site.

  I ran the HP print and Scan Doctorand he suggested I have reinstall the driver.  I have downloaded and saved the current HP (PS_AIO_06_C4700_USW_Full_Win_enu_140_175.exe) and then uninstalled the existing driver.  When I tried to install a new, a window pops up saying "the system cannot find the file specified," with only a single box for click that simply says "OK".  The installation went through 'examining installation options', after entering "check updates, download updates, install updates" and then it was all in "audit system", who jumped out of the window "file not found" upwards, and when I clicked 'OK', the installation window as well as the error message box simply disappeared.  Which I suppose is the path to the file is under the window, but it didn't fit so he showed not the end.  What I read was "C:\Users\... \Local\Temp\7zS588E\Setup\.\Setup\hpzpnp40...»

  I found a topic on the same printer model for the same problem in the forum, which offered this hotfix:

  You must first complete a level 3 of the software uninstallation. I've included the steps below to do this.
  
  1. press the Windows key and the letter R
  2. type %temp%, and then click OK
  3. open the 7z folder (a more recent if there are multiples)
  4 open the util folder
  5 open the folder of the ccc
  6. double-click on the Uninstall_L3
  
  Once you have completed the Uninstall_L3, delete all of the items listed in the temp folder. Note, you will not be able to remove all the elements, please ignore those that do not. Then please empty the trash and perform a clean boot. I've included the document «How to perform a boot in Windows» If your computer does not request it, restart your computer.
  
  Once your computer is back, you must reinstall the printer software. You can do this either by using the Setup CD, or by downloading the software.

  I did what was suggested, until he got to the point where it says it was the case recommend not removing any more items if I had intended on using the HP Officejet printer (Yes, I have a second HP printer connected to the network) anytime in the future.  Not really understand how it all works, I decided to stop what I was doing, so unfortunately it has not solved my problem.

  Do I need to uninstall both printers HP before I can reinstall a?  And if I do that, is there a reason that I wouldn't be able to reinstall the two printers?  Looks like I'm asking trouble.  Bottom line... I can not install the driver.

  I tried to install the full versions and the driver base and still get the same result.

  I have a HP Pavilion dv6 - 3100t for computer laptop, running Windows 7 Edition Premium, version 6.1.7601 family service pack 1 64-bit.  I have not installed new hardware or software.  This printer has always had a wireless connection.  The router I'm using is a Netgear 54Mbps WGR614 v6 (provided by my cable company) and the network includes not only my laptop and the Photosmart printer, but also desktop ASUS, HP printer, an Officejet 6300 series (used only for printing graphics and photos via a wired to the router) and a chip on Vizio TV.  I use Norton 360 first Edition and disabled the antivirus auto-protect when I downloaded and tried to install the driver.

  Help, please!  And thanks in advance for your time and your attention.

  Oh, Jamieson, it worked!  I can print again!  A massive amount of thanks and congratulations to you.

  I couldn't believe it when he actually passed the point where it normally would stop the installation, but then almost at the end, upward jumped «Fatal error during installation»  My excitement sank into a depression.  He said while the installation was not successful and he needed to collect information in order to diagnose the fault.  I looked at what has been collected, and it was more or less gobblety-* beep * for me.  There was a code of 19714722 error condition, if that means anything.

  Then he placed on my desk, the "Error of Installation HP - Windows 7.hta" file and instructed me to do away with the current window, restart, and then open the file and move forward with these guidelines.  I did and he basically had me to restart the computer once again, and then turn the printer off, unplug the printer, then unplug the router, wait 30 seconds and then plug the TAA - DAA and back in, I'm back in the business of printing.

  Thank you very much for your time and patience.

  All the best to you and yours!

• Build error cannot find the distribution under construction

  I had a similar problem like this thread.

  http://forums.NI.com/T5/LabVIEW/build-error-can-t-find-distribution-being-built/TD-p/1462842/page/2

  My old guard Installer and ask for copy of the installation is finish. Quite annoying because it takes so long to get there. Any advice would be appreciated. I've attached a screenshot of my error message.

  You created this problem by running a build already install on your development computer. If you are distributing drivers with your installer you should NEVER run the installation program on the machine on which you build.

  Here's what happens:

  All software shops NOR where it was installed since in the Windows registry. When you initially installed it note where you install (DVD, network drive, etc.).

  When you build an installer in TestStand will prompt for this location if it cannot find the original installation files (that is, if you take the DVD from the drive disconnected from the PC from the network, etc.)

  What happened on this PC is you have to build a Setup program, and then you run this installer on the PC, and because the pilots were already present it replaced the path stored in the registry with the path where your Installer (e.g.) was C:\Temp\long path)

  I'm guessing that you have now deleted this former Installer. That means that you have to re - run installers for ALL the software to, OR that you have installed on this machine so the registry is updated to point to the path of DVD or the network path.

• Cannot find the function in the dll library

  I'm trying to use the function I build in a C++ of Labview "Call library function" dll, but it cannot find the name of the function "Add" or "divide". Attached my .dll, file .cpp and screws, could you help me to find out where is the problem?

  The only function exported in your original of the CPP file is the

  add_num()
  

  function. Declare the object as static methods does not export them. It just creates methods of objects that do not have an implicit object as the first parameter pointer and so these functions cannot reference the data object members (but your class has none yet).

  Essentially if you intend to do all your static class methods, using a class is actually pretty meaningless. You would be better with simple standard C functions as your add_num() function is.