Cannot find the files in a folder, how to recover the

Similar Questions

• "The system cannot find specified file", or "refers to a location that is not available" in my folder music Public

  I have a problem with several files that I can't remove. I bought a new laptop Windows 7 a few months ago, and my music library is located in an old Mac I installed iTunes and copied everywhere, but for some reason, a couple of directories has become corrupted in the process. I was able to move a couple of them from 'C:\Users\Public\Music' to 'C:\Corrupted records' so I don't have to look at, but one of them is

  refusing to move. If I try to open it, I get the message "C:\Users\Public\Music\P.O.D. refers to a location that is unavailable. It could be on a hard drive on this computer or on a network. Make sure that the disc is inserted correctly, or that you are connected to the Internet or your network, and then try again. If it still cannot be located, the informaqtion could have been moved to another location. »

  If I try to get the properties, the type of file is a folder (.) that opens with Windows Shell common. Reading alone and Invisible are unchecked. It is not shared. The requested security information are either unavailable or cannot be displayed. There are no previous Versions. I tried optimizing for music and General items.

  I tried to remove it from a command line, and although he can be seen in the directory, I get an error if I try to delete or move it. I tried to delete it in Mode without failure. I tried to create another folder with the same name, and it creates a folder without end '. ", I'm able to remove, but the original is still there. I have tried uninstalling iTunes and iTunesHelper.exe cessation force.   I ran a chkdsk.  I looked in the registry. I tried to reboot in safe mode and try it. I tried to create a new account and delete from there. I tried to reset the permissions. I even deleted my entire library of music. If I try to change properties it tells me that the "system cannot find specified file."

  This issue is driving me crazy... I should be able to just go and start over, but I won't be able to copy this particular music folder. I could live without it, I suppose, but I wouldn't not to-I fear that this will happen in folders more if I can't find a solution. I could ignore it, but I am too a retention... I installed servers in a previous life, and when such things happen that we do something more deep is what concerns me in particular.

  Any suggestions? Please?

  Hi Zarebeth. I have the answer to your problem. The problem you are having is the same problem I had, it's a file name that ends with a '. '. (one point). That's THE problem, which has also caused all of your previous attempts remove this folder to fail. Windows does not allow you to create such a file, but Mac FACT (you mentioned that your music library lay on an old Mac)! Try for yourself, create a folder in Windows called "P.O.D." and Windows automatically re-writing this folder as "Painter" (note the last missing point). MAC doesn't have a problem with that, you can call your folder "P.O.D." witout any problem (but also allows you to call this 'Painter' folder (note the last missing point)). The only problem is when a folder created on a Mac device ends on a computer Windows, that happened when you copied the musicfolder of your Mac on your Windows 7 laptop. For example, I had the problem with music "C:\Users\Public\Music\M.I.A" and "C:\Users\Public\Music\T.I." after that I copied the files from my Ipod Touch (also a feature of Mac of course) for my new Windows 7 laptop to function.

  Now, I can only tell you how to remove this folder, I don't know how to recover all the data that have remained in this "indelible" folder (if any). What you can do of course, is to return to your old Mac, rewrite the "P.O.D." folder as "Painter" (note the last missing point) which will BE recognized by your computer laptop Windows 7.

  It's very simple, and you'll wonder how the sollution might actually be this simple :))

  GO to "command prompt" (start > all programs > Accessories > prompt) then in the command prompt (the small black screen with white letters), you type (in your case):

  RD/s '\\?\C:\Users\Public\Music\P.O.D.

  RD is as a function of deleting files (not for the files).

  You will then be asked if you are sure "(Y/N)" and then of course, you type 'Y' and press enter! " And like that... begone is the folder which you so frustrated! Happy days are back! : )

• During startup, I get an error message that the registry database cannot find a file and modify registry to delete the reference to the file in the registry. How can I do this?

  Original title: Registery Error Message

  During startup, I get an error message that the registry database cannot find a file and modify registry to delete the reference to the file in the registry.  How can I do this?

  Hello

  • What were the changes made before the problem occurred?

  I recommend you perform the clean boot.
   
  Configuration of your system in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Restore failed image because of the message error "system cannot find the specified file (0 x 80070002). Is my file of the backup OK folder structure?

  I had to reinstall clean Windows 7 64-bit because of the failure of the RAID 1. I have a picture of my original installation system, but I can't restore it; everything I try, I get the message "system cannot find the specified file (0 x 80070002).  I work through a number of possible solutions, without success so far.

  According to the kb/951002 (that is for Vista but I can't find an alternative for Win 7) I made sure that the SYSTEM account has read permission for the backup folders and subfolders.  However, the file structure of the specified in the above article backup folder is different from my image file structure.  Specifically, article specified a structure of 'N.zip' file for the backup files but mine are a mixture of XML documents and VHD - i.e. no "zip" files Also, my GlobalCatalog file does not what kind of file, for example, it wouldn't ".wbcat" required file type specified in the article.

  The differences above could explain the inability to restore the image and if so, any ideas on what to do about it?

  Kind regards

  Ian

  Thanks Mick, will redirect the request.

  Kind regards

  Ian

• LR 5.7 cannot find my files already edited because I accidentally deleted them. I have original and exported raw files edited JPEG images on an external hard drive. How do return on LR the possibility to repeat already published photos complete with the p

  LR 5.7 cannot find my files already edited because I accidentally deleted them. I have original and exported raw files edited JPEG images on an external hard drive. How to get back on LR the possibility to repeat already published photos complete with a history of editing? Thank you.

  Thank you Joe Maniac.  I deleted the original linked files on my internal hard drive which were dng files, but had copies of the raw files edited and edited the exported raw files (in JPEG format).  I don't have copies of dng files.  So what I ended up having to do was import the original raw files which then made a DNG copy on my internal hard drive.  The link has not changed, but now the files were back in the original track for missing photo alerts disappeared and I was able to see my change history.  The process has been painful, but without the dng, I had nothing to do a link to more if at least re-import them files has recreated the dng.  I don't know if there was an easier way, but it seemed that the problem did not the link deletion.  I use LR for a few years, but it was a rookie mistake, precipitated by my hard drive being so jammed up I ended up delete what I shouldn't.  I should have just moved the dng and the link to an external hard drive. Thanks again.

• Photosmart C4780 installation fails at the "system cannot find the file specified."

  My problem began simply with your printer, a HP Photosmart C4780, who has always had a wireless connection and would not print.  Initially, the checked network connection fine control panel of the printer.  I ran a Microsoft printer troubleshooting, which found a block in line print and authorized.  The first test page print, but did print the "internal test page.  I did not understand what it meant, so I looked for help on the HP site.

  I ran the HP print and Scan Doctorand he suggested I have reinstall the driver.  I have downloaded and saved the current HP (PS_AIO_06_C4700_USW_Full_Win_enu_140_175.exe) and then uninstalled the existing driver.  When I tried to install a new, a window pops up saying "the system cannot find the file specified," with only a single box for click that simply says "OK".  The installation went through 'examining installation options', after entering "check updates, download updates, install updates" and then it was all in "audit system", who jumped out of the window "file not found" upwards, and when I clicked 'OK', the installation window as well as the error message box simply disappeared.  Which I suppose is the path to the file is under the window, but it didn't fit so he showed not the end.  What I read was "C:\Users\... \Local\Temp\7zS588E\Setup\.\Setup\hpzpnp40...»

  I found a topic on the same printer model for the same problem in the forum, which offered this hotfix:

  You must first complete a level 3 of the software uninstallation. I've included the steps below to do this.
  
  1. press the Windows key and the letter R
  2. type %temp%, and then click OK
  3. open the 7z folder (a more recent if there are multiples)
  4 open the util folder
  5 open the folder of the ccc
  6. double-click on the Uninstall_L3
  
  Once you have completed the Uninstall_L3, delete all of the items listed in the temp folder. Note, you will not be able to remove all the elements, please ignore those that do not. Then please empty the trash and perform a clean boot. I've included the document «How to perform a boot in Windows» If your computer does not request it, restart your computer.
  
  Once your computer is back, you must reinstall the printer software. You can do this either by using the Setup CD, or by downloading the software.

  I did what was suggested, until he got to the point where it says it was the case recommend not removing any more items if I had intended on using the HP Officejet printer (Yes, I have a second HP printer connected to the network) anytime in the future.  Not really understand how it all works, I decided to stop what I was doing, so unfortunately it has not solved my problem.

  Do I need to uninstall both printers HP before I can reinstall a?  And if I do that, is there a reason that I wouldn't be able to reinstall the two printers?  Looks like I'm asking trouble.  Bottom line... I can not install the driver.

  I tried to install the full versions and the driver base and still get the same result.

  I have a HP Pavilion dv6 - 3100t for computer laptop, running Windows 7 Edition Premium, version 6.1.7601 family service pack 1 64-bit.  I have not installed new hardware or software.  This printer has always had a wireless connection.  The router I'm using is a Netgear 54Mbps WGR614 v6 (provided by my cable company) and the network includes not only my laptop and the Photosmart printer, but also desktop ASUS, HP printer, an Officejet 6300 series (used only for printing graphics and photos via a wired to the router) and a chip on Vizio TV.  I use Norton 360 first Edition and disabled the antivirus auto-protect when I downloaded and tried to install the driver.

  Help, please!  And thanks in advance for your time and your attention.

  Oh, Jamieson, it worked!  I can print again!  A massive amount of thanks and congratulations to you.

  I couldn't believe it when he actually passed the point where it normally would stop the installation, but then almost at the end, upward jumped «Fatal error during installation»  My excitement sank into a depression.  He said while the installation was not successful and he needed to collect information in order to diagnose the fault.  I looked at what has been collected, and it was more or less gobblety-* beep * for me.  There was a code of 19714722 error condition, if that means anything.

  Then he placed on my desk, the "Error of Installation HP - Windows 7.hta" file and instructed me to do away with the current window, restart, and then open the file and move forward with these guidelines.  I did and he basically had me to restart the computer once again, and then turn the printer off, unplug the printer, then unplug the router, wait 30 seconds and then plug the TAA - DAA and back in, I'm back in the business of printing.

  Thank you very much for your time and patience.

  All the best to you and yours!

• Error 2: The system cannot find the specified file. Even after restarting the Printer Spooler service

  I tried all of the suggestions posted and have had no success in restarting my print spooler. Help, please.

  Original title: I tried to restart the print spooler as directed, and he returned the error 2: the system cannot find the specified file. He does that and is it fixable?

  @Winston Microsoft M committed Support Engineer 'expert '.

  I can see your response that you did take the time to reproduce the problem and then try your own ideas to check if the problem persists.

  Here is what I suggest to you, so you can learn how XP actually works:

  Start in the XP Recovery Console or Safe Mode, so Windows File Protection does not run.

  Rename your file c:\windows\system32\spoolsv.exe you can remember (such as spoolsv.bak).  Now, the file is "absent".

  Restart normally.

  Then try to start the Print Spooler Service and you will see the error.

  So why don't you follow your own advice and run SFC and troubleshooting automated (as you suggested) and check if the problem persists.

  Please report your results.

  When you see that it does help and that SFC does not replace the missing or damaged file (in the system32 folder) and that the automated troubleshooter does not help, will sing it a different song (we hope).

  Don't forget to rename your spoolsv.bak to spoolsv.exe when you're done messing around autour.

• Not able to repair Windows XP computer error cannot find the file [e1e5132.sys].

  Original title: need help to use the repair feature when you use the disk of resettlement for XP Media Center 2005.

  I cannot using the repair on Windows XP Media Center 2005 feature.  I started the repair process and enter the installation phase, but the installation stops because it cannot find the file [e1e5132.sys] which is a Windows\System32 folder.  I managed to download a Pack which included the file (using another computer), but I can't properly cancellation of the installation in order to install the file in the appropriate location.  Whenever I try to restart the computer, it goes immediately to this part of the installation of the repair process.  Even when I try to restart without reinstall into the CD drive; When the reinstallation disk is removed and I try to restart, it requires me to insert the disc to continue to the reinstall.  Help - How can I back out of the reinstall, so that I can add the missing file first?

  Hi Stephdan,

  1. have you done any hardware changes or software on your computer before this problem?

  2. Why are you trying to fix the computer?

  It would be possible that the Windows XP installation disc is damaged.

  (a) you can try to do a Windows XP disk which should correspond to the same edition, as it is installed on your machine.

  (b) later, try to repair the installation and check if you are able to boot to the desktop normally.

  Perform a repair Installation

  
  Note: however, you should not have Service Pack 3 installed on the computer before you run repair installation.

  Hope the helps of information.
  Please post back and we do know.

• LifeCam does not open after instillation "LifeCam cannot find LifeCam files folder...". "Windows 7 64 bit

  "LifeCam cannot find LifeCam files folder or save a file in there.  For more information, see "Troubleshooting and product support" in aid of LifeCam. »

  It appears when I try to open the Microsoft LifeCam software.

  The camera to initialize not in video chats.

  I'm on Windows 7 64 bit.  It is up to date with all the latest updates.  I have the latest drivers, firmware and software for my webcam (LifeCam Cinema)

  I tried to uninstall, reinstall and update everything.  I disabled the firewall and antivirus during the instillation.

  No executable LifeCam won't open.  So I can't get LifeCam help or hurt shooting

  
  

  Hi ggiavasis,

  ·        What application you use to initialize the video chat?

  ·        How did you install the LifeCam?

  ·        What is the model number of the LifeCam?

  Try the steps listed in the link below: fix empty overview, "initialization error" or 'no camera not connected' error in the LifeCam software: http://support.microsoft.com/kb/933311

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 backup error "the system cannot find the file specified. (0 x 80070002) »

  * Note that I never could solve this problem. In the long run, I ended up reinstalling the operating system (for different reasons), but the issue remained pending. Thanks to those who have tried to help. (January 30, 2011)

  Suddenly, I seem to have a problem with Windows 7 backup. I get the message "the system cannot find the specified file. (0 x 80070002) "at the point in the process when the backup is supposed to start. It has disabled my ability to make a backup, of course, except to the directly copy files to another hard drive. I was able to use the same USB drive in the past, so I don't know what happened.

  I thought it might be a corrupt profile causing the problem, but I still get the same message on the new profile. I thought that maybe it's the reader, but I get the same message when you try to use the DVD burner.

  I think my Windows software is up to date, and I looked in different places to find an answer without success. Any help you could give me would be appreciated. Thank you. I would be happy to provide you with any additional information you might need.

  Hi Cuzzlor,

  I finally solved the problem last week; I had the same error for 4 months.

  Although the error message when opened on the Notepad kept identifying a PDF 'missing' that I had deleted my office long and the computer.  I couldn't find the file back.

  I noticed that the library tends to scan and Add locations; He had made a place out of the folder, because it was a file created with a scanner.

  I've removed the 'empty' location, I don't know how I didn't notice, she draws from images and my backups are free from error.

  I hope this helps.

• Invalid application - cannot find the config.xml file archive

  I'm new to webworks development... I created a sample config.xml and index.html in the folder Helloworld and made a Zip file...

  Then using ripple I packed up the app and the. Cod files are generated correctly...

  But I was not able to pack and sign using ripple, if I had the signature keys added to the bin folder of the SDK correctly...

  So I tried bbwp command line argument to achieve the same... But it has ended up with the error "Invalid application archive - cannot find the file config.xml.

  What is the problem that I do with the archieve file?

  How to use eclipse for development for the Webworks 2.3.1.5 sdk?

  My guess is that you have a HelloWorld inside your zip file and the file config.xml and index.html are inside this folder. The config.xml file must be in the root and must reference the index.html file, wherever it is in the zip directory structure.

• Cannot find the exectable Viewer in a temporary file when I use image viewer

  When I try to view a CD in the image viewer, I get a message saying 'cannot find the viewer in a temporary file.

  Can someone help me with this problem?

  Hi Robert,.

  As a work-around, try to copy the contents of the CD player on the desktop and check if you are able to view the files.

  If you encounter an error, please let us know the exact error message.

  In addition, to give authorization to the Temp folder and check if it makes a difference.

  The path of the Temp folder will normally be

  \AppData\Local\Temp C:\Users\

  In order to locate the temporary folder in windows 7, follow the steps below:

  1. Click Start, in the search box, type CMD.
  2. Right click on CMD and select run as administrator.
  3. In the command line type ECHO %Temp%.

  To change the permissions to the TEMP folder, follow the steps provided by John Rubdy in http://answers.microsoft.com/en-us/windows/forum/windows_vista-files/how-do-i-change-folder-and-file-permissions/465f2b42-63dd-4486-8dd1-c870290efeed

  Note: The steps also apply to Windows 7.

  This is a step that has worked for some users who use CD xray viewer program.

  Copy and replace the 2 files; 'CDViewer_11.04.0001' and 'sectra' in the case of non-functional account (on the user account where the CD can be read without any problem)

  Location: C:\Users\\AppData\Local\Temp (where user name of the user account name you have connected)

  Note: you must copy the two files to a different user account where you don't have the files on the CD display problems.

  Hope this information is useful. If you have any questions, please let us know.

• Photosmart C5180 Installation ERROR - Windows 7 64-bit - system cannot find the file hpzprI40.exe

  Photosmart C5180 all-in-One

  During the installation:

  C:\Users\Test\AppData\Local\Temp\7zS1DB2\Setup\...\hpzdrI40.exe - m...

  The system cannot find the specified file.

  I clicked OK, then came next to the top:

  Error Situation code: 06768865

  The following lines were extracted from installation error logs.

  + Launching 0000000000001246128\s\Now = X:\hpzprI40.exe m

  preloadiceenginetoguidfolder-* "X:\autorun.inf" - nosplash - checkPath

  XXX-1-f "X:\hpoins18.dat" "-number validate dat"-No. validate "

  Found source file: X:\hpzsetup.exe

  VerifyFilesNoDecompression() failed with the system cannot find the specified file.

  Exit code = 2

  H E L P!  I don't know what to do now.  I tried to install the downloaded file, AIO_CDS_Net_full_Win_WW_130_140 on HP site.  My operating system is Windows 7 Ultimate 64-bit.   I need to get this working today and need complete instructions on what and how to do this fix.

  mrsjeffyg, I recommend that you completely uninstall the printer from the computer. Make sure that all copies of the printer and the associated files are removed from programs and features, the Manager of devices, and the devices and printers. If you are connected with a USB cable, make sure that the cable is removed from the printer for the duration of the present.

  Click START and type "%temp%" and press ENTER. This will open the temporary folder, and I want that you delete all the files that you can here. Some will not be able to be deleted, so ignore these files.

  Restart your computer.

  Follow this link here and reinstall it from the Full_Feature Driver and software.

  http://goo.GL/0zXiT

  I would like to know how it goes!

• Workstation cannot find the VMDK file, but it exists.

  I backed up a Windows 7 year last to Carbonite. He had several defined virtual machines and I now have to watch a Windows 7 computer. I downloaded and unpacked the entire file, I think. When I try to run it with my computer it says

  Could not open the folder "D:\Windows 7 Vaio\Windows 7.vmdk":

  The system cannot find the specified file.

  But the file is actually in the folder where it is looking and he had the same name. Why can't he see the file? How can I solve this problem?

  Depending on the file format of the virtual disk, virtual disk may consist of several hard files, and the error can occur because of one or more of the required . VMDK files is not being restored. If the . a VMDK file is a small text file, it must contain the names of all the -s #. VMDK files.

  André

• Setup error "the system cannot find the specified file" (hpzprl40.exe)

  Trying to install HP Photosmart c5180 all-in-one using the latest version of the software download at HP and have Windows 7 Asus desktop computer. Receive error install "the system cannot find the specified file" (hpzprl40.exe), and the wizard stops.  Help, please.

  Hi loveisus,

  Try using the brush included in the CD or download. Let me know what you find?

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-76232-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 1153481 & sw_lang=.

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-76232-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 1153481 & sw_lang=.

  10. run the download to reinstall the printer