Sony Vaio matshita dvd - ram uj870qj ata device problem worked perfectly, but now is recognized in devices such as the CD-ROM Manager

Similar Questions

• Average cd - / dvd-station is niet leesbaar (MATSHITA DVD-RAM UJ870BJ ATA Device)

  My medium in cd - / dvd-station is niet leesbaar (MATSHITA DVD-RAM UJ870BJ ATA Device)

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  Left click at the bottom of the Microsoft Community page

  English and set your language.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Matshita DVD RAM UJ850s ATA optical drive will not read burned media, running Vista

  * original title - CD/DVD unit read not "burned" cd *.

  Hi, there are about 6 weeks, I had to do a recovery because a virus in my PC, the problem is that now the optical unit reads no CD, it reads 'original' CD, DVD (original and burned) but not burned CD specially those who have programs on them, could be a driver problem, but so far I have not been able to solve the problem , and I m not sure the original driver are in Sony's site, or any other Web site.

  PS the thing Burns CD and they can be read after that that they were "closed".

  I have a VAIO VGN-N330FH, running Vista Home Basic 32 bit (Spanish), the model is a Matshita DVD RAM UJ850s ATA Device.

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://Club.myce.com/F61/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• My hp DVD-RAM GH60L ATA Device receives an error Code 10. How can I fix it?

  My hp DVD-RAM GH60L ATA Device driver receives an error Code 10. (This device can not start..)

  I fact troubleshooting, uninstalling, looking for changes, then install (but didn't), I disabled and then enabled... Nothing seems to work.
  I checked if my driver needs an update. It is being updated.

  I use a Windows 7 Home Basic, 32-bit.

  Any other ideas on how I could solve this problem? Please and thank you! :-)

  This problem occurred after you update or install something?

  Have you tried the fixit of base?

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

• MEDIA IN CD/DVD DRIVE IS NOT READABLE (ATAPI DVD A DH16AYH ATA DEVICE) IS IN THE DRIVE OR THE MEDIA FORMAT IS NOT SUPPORTED

  I recently had to change the map media on my pc and now I can't get the cd player to read any CD or DVD, now I get this message when I run the troubleshooter of hardware and devices "MEDIA IN the READER of CD/DVD IS NOT PLAYS (ATAPI DVD A DH16AYH ATA DEVICE) THE DISC IS EMPTY OR THE MEDIA FORMAT IS NOT SUPPORTED" I have windows vista.
  Thank you

  Hi Euro Italia stone,

  Thank you for your message.

  What is the make and model of the press you card changed?

  You can try the DVD drive in another computer to see if it's a failure?

  What is your computer make and model?

  I suggest you check the cables connected to the training to see if they are loose.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 8 drivers laptop sony driver Matshita dvd - ram uj8c2

  Hi guys / girls

  Can't use my cdrom drive to look at records on CD.
  I goto Device Manager and the drive has a triangle explanation next to it.
  Even its not listed in desktop etc.  IE can not access - does not appear.
  laptop Sony vaio here - very annoying. Any help would be great.
  Cannot find an updated driver to make this - thank you.

  Thanks a lot for this!

  I tried to find a solution for the error 19 on my Sony Vaio computer for ages! Said that the driver does not work correctly and to update the driver. No updates found. No drivers on the Sony Web site. Drivers on other sites for a price. Tried to uninstall and reboot but no luck.

  Tried this fix with skepticism, but it worked!

  Thank you.

• My hp DVD-RAM GH80N ATA Device no longer works

  Since then I tried to download Itunes I got the error code 32. Have tried all the fixes I can find but none have worked.  Just got mine 6 months ago, it would be undesirable already?  I'm not real informed on all this help please you both.

  Hi CBunch,

  The 32 error will occur because the startup type for this driver is set to disabled.

  It would be great if you could answer these questions to help you further.

  1. What are the troubleshooting steps you have tried?

  2. What is the problem you are having with the DVD-RAM GH80N?

  3. are you able to install iTunes on your computer successfully?

  I suggest you to reinstall the driver and check if it helps.

  Uninstall a program: http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-program

  Install a program: http://windows.microsoft.com/en-US/windows7/Install-a-program

  Keep us informed on the status of the issue.

• DVD Player cannot start HL-DT-ST DVD - RAM GH22NP20 ATA device

  When I start my computer the DVD Writer driver cannot start.

  I checked my device manager and it shows up with an error
  This device cannot start. (Code 10) Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.
  and when I click on "Find solutions" it loads just a little while and then disappears
  the dvd is a LG GH22NP20
  help would be greatly appreciated.

  Blanko2,

  This disc has already worked in the past? When did it stop working? Unfortunately, it seems that using a disc will not be an option. (repair install)

  System Restore: If she stopped working in any time recently, try to do a system restore. Start Menu\ all courses Accessories\ system Tools\ system restore of the course that you want to restore to a point before it the issue.

  Clean Boot:  Perform a clean boot will correct the problems resulting from a conflict with your hardware and the start up programs.

  Clean boot

  1. sign your computer with an administrator account.
  2. click on Start.
  3. type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.
  4. If you are prompted for an administrator password or for confirmation, type your password, or click continue.
  5. on the general tab, click Selective startup, and then uncheck Load Startup items .
  6. on the Services tab, select the hide all Microsoft services check box, and then click disable all.

  When you start, you still have the problem?  If this did not fix your problem, follow these steps to turn back on all startup programs. If this fixed the problem, you must determine which element specifically, caused the conflict.

  1. click on start
  2. type msconfig.exe in the Start Search box and press ENTER.
  3. If you are prompted for an administrator password or for confirmation, type your password, or click continue.
  4. on the general tab, click the Normal startup option, and then click OK.
  5. When you are prompted to restart the computer, click restart.
   
  Check the connections: If none of these work, check the connections on your drive of CD-ROM. open your case, disconnect the cables from the drive and the motherboard and then reconnect the. After a reboot and the problem persists, try to change the connection at the Mo, if that is a possibility.

  If these don't work, replace your CD/DVD drive.

  Thank you, Jeremy M - Support Engineer

• Optiarc DVD RW AD - 7560A ATA DEVICE cannot read the PC DVD - ROM.

  I have sony vaio VGN-NR38S. It has a Optiarc DVD RW AD - 7560A ATA DEVICE.

  A few days ago I bought a DVD of driving test. I can't use this DVD in my laptop.

  I tried this DVD in other laptops and it works perfectly, but when I insert in my laptop, it says "Please insert the disk".»
  could someone help please.
  Thank you.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  =======================================

  As needed check with the Sony Support, their drivers and documentation online and ask in their forums
  on the problems known.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  Sony - Forum
  https://Forum.sel.Sony.com/?XID=M:Showcase:eSupport

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Everytime I turn on my Sony Vaio, I got a message that there is no connection, but there are connections available.

  Original title: change ip adapter for Sony vaio

  Everytime I turn on my Sony Vaio, I got a message that there is no connection, but there are connections available.
  After use the problem solver, I see he has change the updated adapter in place and it works (LAN)
  By wireless, I have the same problem and I also have the message: no possible connection but there are other available links.
  These are my two Wi - Fi and after choice it find it works too, but soon I have do something with my USB ports, I got the same message in LAN and in wireless.
  It begins after we change our router in a KPN Experia box.
  If anyone can give a hint how I can solve this problem?

  Thanks much, much in advance!

  Peter Jansen

  E-mail address is removed from the privacy *.

  Phone: + 31

  [Moved from comments]

  Hello

  1. What version of Windows are you using?
  2. What antivirus application do you use?

  I suggest you send more information to help you better.

  You can also refer to:

  Wi - Fi and in Windows network connection issues.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Vista does not open a cd/dvd using MATSHITA DVD-RAM UJ-850 s ATA Device

  my laptop has a MATSHITA DVD-RAM UJ-850 s ATA Device. but it does not open a cd/dvd. Why?

  Hello

  1 recently, you did changes to the computer?
  
  Method 1. Uninstall and reinstall the cd - dvd drive.
  If the drive is not listed, remove and reinstall the existing drivers.
  To do this, follow these steps:
  a. Click Start and then click Control Panel.
  b. click System and Maintenance, click System and then click on Device Manager.
  Note that if control panel is in Classic view, double-click System and then click on Device Manager.
  c. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  d. in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.
  e. When you are prompted to confirm that you want to remove the device, click OK and restart the computer.
  After the computer restarts, the drivers will be installed automatically.

  Method 2. The firmware was updated.
  I would also recommend updating the firmware of the CD - DVD drive.
  You may need to contact the manufacturer for it.

  I hope this helps.

• This device cannot start. (Code 10). Matshita DVD-RAM UJ-850 s ATA device not found.

  The operating system does not detect the Matshita DVD-RAM UJ-850 s ATA device on my Toshiba Satellite. I tried Microsoft Auto difficulty and it didn't fix it. The CD player worked last week when I installed ITunes software. Now, the driver cannot be detected. Known corrections or suggestions?

  You must uninstall, then reboot and let the program installation is the device when it restarts. If the correct drivers are found, it will install. In case of failure, it's probably because Search Setup default is files of the user and not the C:\windows\inf or directories c:\windows\system32\drivers\, which you can specify by choosing to install from a list or specific location, and then by typing or by going to the it. If this fails, check the bios settings.  But most likely your original driver was silently replaced, by a program system file or a third-party application. If need be, you can try a system restore to return the parameters of your system to a point in time where everything worked. I would try one more point to restore and not a newer version, preferably a restore point launched machine, not one caused by installing or removing a program or a driver. "THE BEST THING TO DO IN THIS WORLD IS A WRONG ANSWER! "I"DON'T"WINDOWS...". »

• Windos Vista no reconoce unidad MATSHITA DVD-RAM UJ-850 s ATA DEVICE

  MATSHITA DVD-RAM UJ-850 S ATA DEVICE

  I'm sorry, but these Vista Help Forums only provide support in English.

  http://support.Microsoft.com/common/international.aspx

  To ensure that you receive support appropriate for your location information, select your region setting in the list on the link above and then click the arrow button.

  Thank you.

  Mick Murphy - Microsoft partner

• Hi, my DVD MATSHITA DVD - RAM UJ 875 S ATA does not work

  Even I am facing the same problem.

  I have a lenovo y410 laptop. my DVD MATSHITA DVD - RAM UJ 875 S ATA does not work... it is not reading all discs... not to burn all...

  When the problem occurred I immediately called the customer... but as the phones warranty period I can replaced also do it... Please help me with a solution...

  This is what happens when I insert a disc in the drive... the led flashes for a few seconds... the disc seems to move but then the led stops blinking and nothing happens...

  I have tried both what is the necessary changes in the REGISTRY & also uninstalled the software and restarted my laptop. But the problem is still there.

  Please let know me of any other way to solve this problem

  Hello
  
  I suggest you run the fixit and see if it helps:
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  It will be useful.

• supports matshita dvd - ram uj-850 s NOT recognized, Mats_run.dvd cancel installation of PowerShell

  Updates in security plague devices on my Toshiba Satellite? Matshita dvd - ram uj-850 s can notrecognize the media .  I tried to run Mats_run.dvd.exe and it cancels the installation of PowerShell and said run again later.  I checked the registry for PowerShell and he's not here.

  Updates are downloaded automatically but are installed manually. Microsoft.NET Framework 3.0 is installed.  There are 2 hard drives usb, e and h. The internal hard drive is c and the dvd drive is d.

  I downloaded PowerShell for English x 86, and it also cancels the installation.  This facility will write on e drive unless the e reader is currently offline.  It seems to me that installation should go in one of the program files. No matter what.

  I heard Japanese factories to boost productivity by having models of foremen (also known under the name of straw bosses) in the break for whacking room. MicroSoft is expected to provide a game that allows you to the storm of MicroSoft when you feel frustrated. Laugh for everyone.

  I tried the registry filter entries delete and it does not correct.

  The drive reads some DVD.  The one I use is readable on other computers and was burned at the origin of it. This drive is able to read the DVD right here.

  DVD with files on them are not read.

  I cleaned the drive with a DVD-rom cleaner.

  Audio_TS, Video_TS structure is recognized on a DVD so that the reader is able to read the DVD.  It seems to be a Windows problem.

  Combustion works very well.

  Hey, Arch.

  I suggest uninstalling the drive in Device Manager and restart the computer.

  If this does not help, you can try to uninstall all your computer disc burning software, if you have the means to reinstall, and then reinstall the drive.

  The Powershell do not install cannot be bound.

  I suggest to run a full system scan after you have updated the antivirus definitions.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.