Similar Questions

• Cannot generate the Documentation printed in Word

  I'm upgrading from RoboHelp 5 to RoboHelp 7 because the old version is not compatible with MS-Word 2007. However, I'm unable to generate documentation with RoboHelp 7. He keeps giving an unclear error message:
  
  "Microsoft® Word has not been started on this computer.
  "Launch Word and click on 'Start using Microsoft® Word' option before generating the Documentation printed again."
  
  I run Word, but there is no option 'Start using Microsoft® Word' on Microsoft Word or RoboHelp 7. I thought it might have something to do with my regular user account. Yet, I still have the same error message after upgrading my account to an administrator.
  
  I found some articles with a similar problem, but I do not have open office installed.
  
  Can anyone help?

  After some research, I'm finally able to generate printed documentation. Not sure what I've done has really solved the problem. In any case, that's what I did:
  1 downloaded and applied this security fix for printed documentation.
  http://download.Macromedia.com/pub/RoboHelp/files/downloads/SR/x3/rhx3sr1.exe
  2. download and apply this hotfix.
  http://download.adobe.com/pub/Adobe/RoboHelp/Win/7.x/Setup.exe
  3. downloaded these models and placed them in the target files C:\users\ascentiswm\AppData\Roaming\Microsoft\Templates\
  http://download.Macromedia.com/pub/RoboHelp/files/downloads/SR/X5/rhx5_word2003_update.zip
  Then, the PrintDoc.dot macro enabled

• Printing error: internal error occurred, was not able to generate printed documentation

  Begins to build the printed Documentation...
  Processor of printed Documentation 7.00.145
  
  Building C:\ < snip > \User_Help.doc...
  
  Preparation create printed Documentation.
  Compensation output folder...
  Preparing files for printing Document...
  Copying files...
  Updating files...
  Finish the preparation in 1 second.
  Prepare the environment...
  Environment of printed Document Generator: Word 11.0.8227, OS 5.1.2600, RAM M 1536 bytes
  Building printed Documentation "user assistance"...
  Single document of the building 'User_Help.doc '...
  Building 'Title Page '...
  Building 'Table of contents '...
  Preparation create chapters...
  Building "Chapter 1: getting started"...
  Treatment "what's new? '...
  Treatment "Web View Guide"...
  Treatment 'frequently asked Questions '...
  Building "Chapter 2: configuration and management of account '..."
  Treatment 'my settings '...
  Treatment "my Contacts"...
  Treatment "groups"...
  Treatment of 'Roles '...
  Treatment 'Edit roles '...
  Completed the construction of the chapters...
  Building 'Index '...
  Updated list of paragraphs...
  Updating of images...
  Updating page numbers...
  Updating the page headers...
  Update the Table of contents...
  Updating the Index...
  Registration of the 'User_Help.doc '...
  Generation of the "User_Help.pdf"...
  Could not generate file "C:\ < snip > \User_Help.pdf... PDF
  Unable to save the 'User_Help.doc '...
  Cleaning up temporary files...
  
  Internal error detected, impossible to generate printed Documentation.
  
  
  Windows XP, Word 2003, Adobe Acrobat 8, RoboHelp 7... suggestions?
  
  -The word is not open while I create printed documentation.
  -I don't have any odd anti-virus enabled software.
  -Acrobat is not blocked or disabled in word (nothing is).
  -I can create documents printed in the .doc format.
  -I can create PDF files in Word format.

  To correct this problem, you must reregister the Acrobat 8 PDFOfficeAddin.dll. Here's the stesp one of the kb on Adobe.com articles

  Solution: manually register the COM add-in file.
  Warning: this procedure involves editing the Windows registry. Adobe provides no support for editing the registry, which contains critical system and application information. Make sure you back up the registry before you edit. For more information about the registry, see the Windows documentation or contact Microsoft.

  1. close all Office 2007 applications.
  2. in Windows Explorer, locate PDFMOfficeAddin.dll and note its exact path, which may include spaces. The default path is C:\Program Files\Adobe\Acrobat 9.0\PDFMaker\Office\PDFMOfficeAddin.dll.
  3. do one of the following:
  o Windows XP: click Start > all programs > Accessories > command prompt.
  o on Windows Vista: choose Start > all programs > Accessories. Right-click on command prompt and choose Run as administrator authenticate.
  4. in the command prompt window, type regsvr32 followed by a space and the path that you noted in step 1. Place the path in quotes. For example, if PDFMOfficeAddin.dll is in its default location, you would type the following command:

  regsvr32 "C:\Program Files\Adobe\Acrobat 9.0\PDFMaker\Office\PDFMOfficeAddin.dll"
  5. press ENTER.
  6. a dialog box confirms that the registration was successful. Click OK to close this dialog box.
  7. close the command prompt window.

• Placeholders (breadcrumbs, Mini-TOCs) doesn't show not in printed Documentation

  I have included placeholders (bread crumbs and mini-table of contents) in Master Pages. They work as expected for the release of HTMLHelp, but when I generate printed Documentation (.doc), they are not there.

  I checked for if sure I have not has not accidentally assign a condition online only (I have not).

  I use RoboHelp 9 (RH9). I have to do something special?  I just tried applying specific printing condition to bread in the foot and using this condition when generating, but that did not help.

  You get bread crumbs or mini tables of contents in the printed documentation.

  I have not seen the absence of bread crumbs as a problem because they are simply a way to navigate on the screen and would be of no use in print. Mini Tocs however describe what is in this 'chapter' and should be included.

  The more people who report a bug or request a feature, more likely, he will be executed. Please follow this link.

  http://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform&product=38

  See www.grainge.org for creating tips and RoboHelp

  @petergrainge

• Problem of style with printed documentation

  I'm generating printed material in my project, RoboHelp HTML Word. Using some of the tips on the website of Peter Grange, I created my first night out by choosing the option '[none] - use styles CSS for the project' in the printed Documentation Wizard.
  
  The result was very good and I just had to make some changes to the styles in the Word document to get the styles to look as I wanted. Then, I saved the Word file as a template and import the model into my project.
  
  The next time that I generated the printed output, I had a problem of formatting with numbered lists. The indentation is not what I had in the model. I tried formatting in a paragraph and update the style of attachment, but not changes to all instances of the style numbered list. In the Word template, I used the same numbered list style that was in my aid project rather than a standard numbered list styles in Word by one of the suggestions in this forum.
  
  Any suggestions on getting the indentation for numbered lists correspond to what is in my template, without having to set each item in a list me? The main problem I find is that the indentation of each numbered list item gets changed to 0.04 (it is 0 in my model) and an additional tab is added. Also, while in my model the indent and the tab are both set to 0.22, when I generate printed documentation, there are two legs to 0.22 and 0.25, and the hanging indent is set to 0.25. In some cases, a tab gets the value 0.29!
  
  Thank you
  Alan

  Peter,

  Yes, you were right. Before the regeneration of the printed output, I left all of the Word styles the value '[no - style to use in project] ". RoboHelp then created new styles in the Word document with the prefixes "rh_. The list of the bullet and numbered list styles were in retreat and that I wanted them to be. I then took the path of least resistance, so to speak and adjusted other paragraph styles to align properly with the list styles.

  Thank you.

• Failure of the generation of message of printed documentation

  Here is the full message:
  
  Result: Unable to generate printed documentation. Please see message of compilation for more details.
  Click OK to return.
  
  I don't know what the message of the compilation. (The only options it gives me are OK) 1 and 2) support. When I click on help need me on the FAQ page to generate in the RoboHelp help file.
  
  I've been creating documents printed two years without seeing this message. Then she appeared the other day and now it does whenever I try to create printed documents. I have not changed the process I do with subjects.
  
  I searched through this forum and help from RoboHelp HTML. Thank you!

  Checklist given over time.

  1] you use RHX5 with Word 2002.

  [2] RHX5 has applied patches. http://www.Adobe.com/support/RoboHelp/downloads.html

  [3] your security setting is medium.

  [4] you looked at Issues of impression on my site? Please specify what are those who have tried and with what results.

  [5] your logon has admin rights attached.

  [6] your project is not encrypted upward in Program Files but is elsewhere on your hard disk and that you generate on your hard drive.

• Positions lost in the printed documentation

  Today, I tried to generate printed documentation.
  We put our real estate topic of subject titles and use the MyTitle < /title > < title > tag to show this change as a topic title.
  If I generate a Word document, these titles get lost somehow.
  
  Does anyone know how to fix this?
  
  MS Vista 32 bit
  MS Word 2007
  7.02 RoboHelp

  I found the way.

  In your topic, RoboHelp, or model of the section insert this code:

  
  

  MyTitle

  
  

  This automatically inserts the title of the topic of the subject properties in the RoboHelp topic and it is exported to Word, due to the

  Tag,

• e print setup for Photosmart 7520 cannot the printer code to generate

  New printer HP Photosmart 7520 - ePrint does not work as I can not web services to activate.  I also cannot the printer to generate the code for the printer to add it on the web

  Hi Teresa77,

  I see you are trying to reproduce the web services page.  The 7520 Photosmart doesn't have the option to print the page of information on the printer itself.

  Try the following steps.

  1 obtain the IP address of your printer

  a. This can be done by pressing the icon on the printer wireless.

  2. Enter the printer's IP address in a browser.

  3. Select the Web Services tab.

  4. on the left side, select print information Page.

  Let me know how it goes.

• According to this that KNOCK printed Documentation generates a Word document

  Hi all

  According to this that KNOCK "Printed material" generates a Word document?

  It is not exactly according to the table of contents, I created for HTML Help. For example, it takes a subject here and there that I did not put in the table of contents, and anyway it's there even in the printed documentation.

  TIA

  -avi

  See printing on my site.

  When you create a print layout, HR takes the TOC no matter what you select by default. If you don't have a TOC, obviously to that. You can then accept it or amend it, but later, the two are are more synchronized. Change the table of contents and the print layout will not change.

  What you can do, because the TOC Editor is easier to work, is to go in the page mode and use the buttons to remove the previous provision and insert the table of contents was updated.

  See www.grainge.org for creating tips and RoboHelp

• HP PHOTOSMART C5280 "Message of ERROR" print CARTRIDGES, refer to the PRINTER DOCUMENTATION

  My HP Photosmart C5280 All in one will not print.

  It has a flashing orange sign.

  It displays "Print cartridges refer to printer documentation".

  It was working fine yesterday and then just stopped. The cartridges were unchanged.

  Cannot find anything on this problem in the Basic Guide.

  Have printer is off and unplugged but WARNING reappears when returned to service.

  All possible solutions would be appreciated.

  Hi Hallam123456789,

  I see that you are having problems with your printer.  I'll take a look at the document below.

  Incompatible cartridges

  Let me know how it goes.

• RoboHelp 2015: VBA for Word recorded The macro Version is incorrect. Please reinstall printed Documentation.

  I am trying to create a PDF output for my WebHelp project. I get this error message:

  The registered version of VBA for Word macro is incorrect.

  Please reinstall printed Documentation.

  I search for RoboHelp 2015 online help and the forum and cannot find an answer. I searched Word help as well with no luck.

  How to upgrade the version of VBA macro in Word?

  Thank you

  MDawn

  Search of printed Documentation of RoboHelp forum. Sure you want

  He finds.

• Subject disappears in printe documentation

  I create a training materials that will be printed. I've added a new topic for my project and generated in my main layout (web help) and the subject was there. But when I generated the project as printed documentation is not the subject. Help! : ()

  When you generate your printed documents, on the second screen, you will need to add new topics to the left side on the right side. I usually just remove everything from the right to the left and then add everything to the left to the right.

• Application when generating print error

  I have HR 10 installed on my Windows 7 OS 64-bit machine.

  The problem is when I click on print and click Next in the form of printed Documentation, HR crashes.

  Without clicking on next, if I click on save & Generate, pdf is generated with missing topics.

  When I check the event log, I see Application error. What exactly is causing this accident? Help, please.

  

  

  Which version of Word have installed you and the version 32 or 64 bit?

  The latter will not play, and even Microsoft recommends the 32-bit version for compatibility with other applications.

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• Cannot generate any form in oracle r12

  Dear gurus,

  Suddenly, we cannot generate any 'standard or made-to-measure' form with following error message:

  frmcmp_batch Module=$AU_TOP/forms/US/INVGIPDP.fmb Userid = apps/apps compile_all = Yes module_type = batch form only = no output_file=$INV_TOP/12.0.0/forms/US/test.fmx

  10.1 forms (form of the compiler) Version 10.1.2.3.0 (Production)

  10.1 forms (form compiler): Release-Production

  Copyright (c) 1982, 2005, Oracle.  All rights reserved.

  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  PL/SQL Version 10.1.0.5.0 (Production)
  Oracle V10.1.2.3.0 - Production procedure generator
  Oracle 10.1.2.0.0 graphic virtual system Version (Production)
  Oracle Multimedia Version 10.1.2.0.2 (Production)
  Oracle tools integration Version 10.1.2.0.2 (Production)
  Common tools Oracle area Version 10.1.2.0.2
  Oracle CORE Production 10.1.0.5.0
  Compilation of specifications package APP_CUSTOM...
  No compilation errors.

  Compilation of specifications package IPDP_TREE...
  No compilation errors.

  Compilation of specifications package DATA_SET_CTRL...
  No compilation errors.

  Compilation of RESULTS package specifications...
  No compilation errors.

  Compilation of specifications package APP_CUSTOM...
  No compilation errors.

  Compilation of the package APP_CUSTOM body...
  Compile error on the APP_CUSTOM package body:
  PL/SQL ERROR 302 to line 24, column 19
  component 'Disabled PERSON' must be declared
  PL/SQL ERROR on line 24, column 5 0
  Declaration ignored
  PL/SQL ERROR on line 30, column 5 201
  identifier ' APP_WINDOW. CLOSE_FIRST_WINDOW' must be declared
  PL/SQL ERROR on line 30, column 5 0
  Declaration ignored
  PL/SQL ERROR 201 to line 43, column 5
  identifier ' APP_WINDOW. SET_WINDOW_POSITION' must be declared
  PL/SQL ERROR at line 43, column 5 0
  Declaration ignored
  PL/SQL ERROR 201 at line 46, column 3
  identifier ' APP_WINDOW. SET_TITLE' must be declared
  PL/SQL ERROR at line 46, column 3 0
  Declaration ignored

  Compilation of specifications package IPDP_TREE...
  No compilation errors.

  Compilation of the package IPDP_TREE body...
  Compile error on the IPDP_TREE package body:
  PL/SQL ERROR at line 43, column 26 201
  identifier ' APPTREE. COLLAPSED_NODE' must be declared
  PL/SQL ERROR 0 to line 43, column 3
  Declaration ignored
  PL/SQL ERROR on line 50, column 26 201
  identifier ' APPTREE. TREE_NAME' must be declared
  PL/SQL ERROR 0 in line 50, column 3
  Declaration ignored
  PL/SQL ERROR at line 103, column 39 201
  identifier ' APPTREE. TRIGGER_NODE_USER_VALUE' must be declared
  PL/SQL ERROR at line 96, column 3 0
  Ignored SQL statement
  PL/SQL ERROR on line 109 column 18 201
  identifier ' APPTREE. TRIGGER_NODE_TYPE' must be declared
  PL/SQL ERROR on line 109 column 3 0
  Declaration ignored
  PL/SQL ERROR on line 117, column 13 201
  identifier ' APPTREE. TRIGGER_NODE_LOW_VALUE' must be declared
  PL/SQL ERROR on line 117, column 5 0
  Declaration ignored
  PL/SQL ERROR on line 144, column 20 201
  identifier ' APPTREE. TRIGGER_NODE_HIGH_VALUE' must be declared
  PL/SQL ERROR on line 144, column 5 0
  Declaration ignored
  PL/SQL ERROR on line 148, column 26 201
  identifier ' APPTREE. TREE_NAME' must be declared
  PL/SQL ERROR on line 148, column 3 0
  Declaration ignored
  PL/SQL ERROR 201 to 159, column 6 line
  identifier ' APPTREE. TRIGGER_NODE_TYPE' must be declared
  PL/SQL ERROR on line 159, column 3 0
  Declaration ignored
  PL/SQL ERROR 201 at line 184, column 6
  identifier ' APPTREE. TRIGGER_NODE_TYPE' must be declared
  PL/SQL ERROR at line 184, column 3 0
  Declaration ignored
  PL/SQL ERROR at line 264, column 15 201
  identifier ' APPTREE. FIND_TREE_NODE' must be declared
  PL/SQL ERROR on line 264, column 2 0
  Declaration ignored
  PL/SQL ERROR on line 272, column 28 201
  identifier ' APPTREE. TREE_NAME' must be declared
  PL/SQL ERROR on line 272, column 5 0
  Declaration ignored
  PL/SQL ERROR 201 at line 275, column 16
  identifier ' APPTREE. FIND_TREE_NODE' must be declared
  PL/SQL ERROR at line 275, column 3 0
  Declaration ignored
  PL/SQL ERROR line 282, column 28 201
  identifier ' APPTREE. TREE_NAME' must be declared
  PL/SQL ERROR on line 282, column 5 0
  Declaration ignored
  PL/SQL ERROR 201 at line 290, column 6
  identifier ' APPTREE. ACTION "must be declared
  PL/SQL ERROR on line 290, column 3 0
  Declaration ignored

  Compilation of specifications package DATA_SET_CTRL...
  No compilation errors.

  Compilation of the package DATA_SET_CTRL body...
  Compile error on the DATA_SET_CTRL package body:
  PL/SQL ERROR on line 30, column 7 201
  identifier ' APPTREE. NEW_VIEW_BY' must be declared
  PL/SQL ERROR on line 30, column 7 0
  Declaration ignored
  PL/SQL ERROR 201 to line 43, column 7
  identifier ' APP_ITEM_PROPERTY. SET_PROPERTY' must be declared
  PL/SQL ERROR at line 43, column 7 0
  Declaration ignored
  PL/SQL ERROR 201 at line 46, column 7
  identifier ' APP_ITEM_PROPERTY. SET_PROPERTY' must be declared
  PL/SQL ERROR at line 46, column 7 0
  Declaration ignored
  PL/SQL ERROR on line 97, column 14 201
  identifier ' APP_FORM. QUIETCOMMIT' must be declared
  PL/SQL ERROR on line 97, column 11 0
  Declaration ignored

  Compilation of RESULTS package specifications...
  No compilation errors.

  Package body compiling the RESULTS...
  No compilation errors.

  
  Compilation errors are produced.

  
  Form not created

  --------------------------------------------------------------------

  DB version: 11.2.0.3

  Apps version: 12.1.3

  Operating system: hp - ux B.11.31 U ia64

  Kindly advice.

  Kind regards

  Ahmed

  Ahmed,

  It's something should be set by your development team.

  If CUSTOM.pll has been changed, you can simply determine what has changed (unless it is documented), and you will need to contact your developers to see what has changed. If you have any other instance on the same level of Group of patches, then you could replace the CUSTOM.pll file and see if it helps.

  Forms must be compiled successfully on the layer node client (using Forms builder) before moving them to the server and compile again.

  Thank you

  Hussein

• Cannot generate the thumbnail on all widgets (including integrated)

  My installation of Muse (2014.2, OSX Mavericks) gives me a "cannot generate the thumbnail" error one no matter what widget I place (including built-in ones, my own and those that I downloaded from the site of Muse documentation on github).

  So far, I have tried many things including restart Muse, reboot the machine, turn off all browsers in the background, but I can not change this behavior.

  This problem is specific to the machine, I'm getting because the same site on the exact version on another machine (os x mavericks) does not give me this behavior.

  Any help is appreciated.

  Thank you

  
  A.

  Solved. While this problem appeared machine related, it wasn't - it turns out that I had added a js file in my page header that was missing.

  So, the moral of this story is that if you do not see the "unable to generate thumbnail error", look at all the custom HTML you added to the site. Errors in the HTML elements may appear in the wrong place.

  A.