Cannot get contacts on the Meadow

Similar Questions

• I can't get my printer to connect to my laptop. It is said repeatedly 'cannot be contacted over the network, the network administrator.

  No matter what I try, I can't have my printer to connect to my laptop.  Continually, he said "cannot be contacted over the network, the network administrator.  I made this and conducted many helps out.

  What can I do now?

  Thank you.

  Pamela

  Hi Pamela,.

  This must be different. Rest assured that we would do our best to help you.
  
  Please answer the following questions that would help us to understand the issue.
  1. What is the brand and model of the printer?
  2. What are the troubleshooting steps you have tried so far?
  3. were there any changes made to the computer before the question?
  4. how you try to install the printer?
   
  Read the following article that helps you identify and fix common printer problems in Windows.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
   
  If you have any questions do not hesitate to answer, we would be happy to help.

• Cannot get rid of the BIOS password

  Bought an ACER Aspire E1 from an EBAY of ACER store about a year ago. A few weeks ago, I started it and quickly received a BIOS PASSWORD entry. Since that time, the laptop was absolutely worthless. I guess I tried the hardware, software, battery and all I could think of to fix the problem. I tried the MICROSOFT forums. ACER, ASK.COM Forums and forums Forums, forums, forrums and other forums that I could think of to try to resolve the unknown BIOS password. Thanks UEFI.

  I guess short of replacement of the EEPROM on the motherboard (don't think even that would help) which I'd be suspicious to do.

  Cannot get rid of the BIOS password.

  If I contact the ACER Support, they say that it's a hardware problem. I tried (as suggested by ACER support), bringing to STAPLES, BESTBUY, FRYS ELECTRONICS, OFFICE MAX, DATA DOCTORS, and several other 'Repair computer facilities' nothing works.

  IN a WORD, it's a PIECE OF a $400 trash...

  If anyone has any ideas on how to reslove this issue, send me an E-mail, fax, text. or post a reply...

  Thanks for letting me the WIND...

  WMARSH...

  can you post the exact model E1?

  E1 - xxx

• RICOH Aficio 1045 Pcl 6 cannot be contacted over the network

  I am running Windows 7 Pro 64-bit and I try to install a printer multifunction Ricoh Aficio 1045 on a network. I was able to do a typical "add a printer" and everything seemed fine, but I can't print. When I run the troubleshooting printer I get the following error 'printer RICOH Aficio 1045 Pcl 6 cannot be contacted over the network. He said to contact my system administrator. I don't have a system administrator. I'm open to any ideas on this one.

  Printer driver from the site Web RICOH (PLC 6 pilot - worm. 3.1.0.0 r31047en)

  Intel i7 - 3770 k @3. 5 GHz (8cpu)

  16384 MB of ram

  AMD (ATI) V over-pants 725 MB graphics card

  I actually solved myself yesterday.  I installed the printer using its ip address and the PL5e driver and it worked fine.  Thank you. .

• hp 8600 printer cannot be contacted over the network and the printer is not enabled.

  hp 8600 printer cannot be contacted over the network and the printer is not enabled.

  the HP software installed on the PC on the floor. Print wireless from PC upstairs and the PC in the basement on the network for the last month up to yesterday

  Now to receive above - two error messages cannot be contacted ove RL network and the printer is turned off.

  Reality - the printer IS on and the PC on the floor can print to the printer.  Network on the printer symbol says it is connected to the network.

  a reason any PC in the basement all the cant suddenly find the network and the printer?

  Hello

  The first thing I would do is follow step 6 in this document to set a static IP address: http://support.hp.com/us-en/document/c02817031
  When it askes for the DNS information, enter in Google DNS. Preferred DNS = DNS Alt = 8.8.4.4 8.8.8.8

  This could increase the stability of the network connection to the printer downstairs.  If this does not help, let me know what OS is on the computer causing problem, because that could cause a problem?  Other than that, you can check the quality of the signal you get form the network and see if this can be a problem.

• Cannot add contacts for the 'To' and 'cc' Box when sending emails

  Original title: emails

  cannot add contacts to the area "to" or "cc" box when sending mail that I only get the option to add addresses to a small drop-down list when I click in these boxes. I tried to uninstall the application and reinstall but made no difference!

  If you click on the "To", "Cc" or "Bcc" once he frequently gives you used, click New and , it gives you the complete list.  You can switch backwards between them by clicking on

  
  

  A more permanent solution   For Outlook

  Gear
  Several e-mail settings
  Customize Outlook
  Advanced Privacy settings
  AutoComplete suggestions
  Give suggestions for anyone I contacted (contacts and non-contacts)
  Save

• Bought one from Best Buy Apple Watch that had been returned. Original purchaser cannot be contacted. The phone is synchronized to their account, how can I sync to mine?

  Bought one from Best Buy Apple Watch that had been returned. Original purchaser cannot be contacted. The phone is synchronized to their account, how can I sync to mine?

  You can not. Take it back to Best Buy and ask for a refund.

• I get an error code whenever I start my computer. I have loaded several packs of registry repair software but cannot get rid of the message. The message bed error loading c:\windows\system32\pofusido.dll the specified module is not found

  I get an error code whenever I start my computer. I have loaded several packs of registry repair software but cannot get rid of the message. The message bed error loading c:\windows\system32\pofusido.dll the specified module is not found

  Hello

  I googled this file pofusido.dll and it could be caused by a virus.

  I would suggest that you disable the restore mode as viruses use it to reinstall set apart them.

  Download and install the free http://www.malwarebytes.org/

  Restart the computer and keep pressing F8 to get into safe mode with network connection.

  Once you have updated Malwarebytes run and see if it can remove the virus.

  So delete all cookies in your internet Explorer.

  Please keep in mind that my answer is based on the information in your message. More the better I can answer, Slan go foill, Paul

• printer cannot be contacted over the network

  I have a HP deskjet 656 printer that I added as a network printer. I installed it on my computer laptop windows 7, which went well. However it does not print. The touble shooter printer tells me to 'the printer cannot be contacted over the network. It works from another laptop I have but not my laptop Windows 7.

  I had a similar problem with my new Windows 7 laptop. After a power failure, the laptop would not recognize my HP printer and the error was that "the printer cannot be contacted over the network" so I spent a lot of time to solve the problem. Finally helped the simplest thing was that I removed this printer in my list of printers and added again using the "Add a printer" Wizard and it worked perfectly!

• cannot get audio in the timeline to another video

  cannot get audio in the timeline to another video

  

• CANNOT GET RID OF THE ARROW ON THE LINE OF MYT TOOL.  CANNOT CHANGE THE COLOR OF THE STROKE.  Help

  CANNOT GET RID OF THE ARROW ON THE LINE OF MYT TOOL.  CANNOT CHANGE THE COLOR OF THE STROKE.  Help

  

• I can't get contact with the cloud

  I can't get contact with the cloud. The icon on my desktop is black and the wheel turn and turn and turn. What should I do?

  OK, great, I hope that the link of this thread (shown below) helps you then your situation. App does not open. Wheel of progress turn continuously

  http://helpx.Adobe.com/creative-cloud/KB/unknown-Server-Error-launching-cc.html

  Keep us informed.

• Cannot get SW1 to the second network of ping and can't get the HQ router to ping SW1.

  Hello the forum community.  I am new to Cisco Configuration and cannot understand why, in the attached packet tracer file, I can't have my SW! switch to ping to the gi0/1 interface of the branch office router and beyond.  I also can't understand why I can ping to the gi0/0 interface on the router in the branch office router HQ, but cannot ping the switch SW1 and beyond.

  Ideally, I'm trying to configure the network so that PC1 can ping 172.16.1.100, which is a loopback on router HQ.  I ping the closure of the branch office router, but not the switch SW1.  I cannot ping the gi0/1 interface on the router of the branch of the SW1 switch and do not understand why.  I can also ping the gi0/0 interface on the router in the branch office router HQ, but cannot ping the switch SW1 of the HQ router.

  PC1 - 10.1.1.100 255.255.255.0

  SW1 - VLAN 1 - 10.1.1.11

  Branch gi0/0 - 10.1.1.1 255.255.255.0, gi0/1 - dhcp assigned as 209.165.201.1 255.255.255.224, dynamic NAT activated with access-list 1 (permit 10.1.1.0 0.0.0.255), the pool name is NAT_POOL with the address range of 209.165.201.5 - 10 255.255.255.224 as NAT address range.  I can see it working with debug ip nat active when I ping the router address 10.1.1.1 HQ, although I have test the ping without NAT and it is always successful.  Gi0/0 inside the nat, g0/1 outside the NAT.

  HQ gi0/0 - 209.165.201.2 255.255.255.224, dhcp server enabled to provide an address for the router in branch gi0/1.  I had to add a static ip route 10.1.1.0 0.0.0.255 209.165.201.1 in order to be able to get the ping to the router HQ to branch router gi0/0 to work.  Don't know if there is a better way to do it, but it's the only way I could make it work so far.

  You will need to rename the .txt file, attached to. pkt.

  Thanks for any help!

  Hello

  The switch has ip routing enabled, if so disable it and give it a default gateway instead

  no ip Routing
  IP default-gateway x.x.x.x

  RES

  Paul

• Smartphones from blackBerry Desktop Manager "disconnected" and I cannot get rid of the error message

  I just bought a Blackberry Curve 8530, running v5 software, my computer is Windows 7. I installed the 501_b073_multilanguage software that I downloaded from the site Web of Blackberry. When I run the Desktop Manager I get this message: "Before you start, check that your current BlackBerry device is connected to your computer." Troubleshooting functions I've seen on this forum: many tips (ones I've tried is below). One in particular, that I can't do is "Office Manager shows"off". ".
  -Make sure that the user has entered in the Desktop Manager and select options > connection settings > detect. »

  ... because I can't get rid of the error message dialoge box, and I can't click on the menu options in the BB Desktop Manager.

  I tried the following:

  • uninstalled and reinstalled twice - 2nd uninstall was a "hard" uninstall where I deleted the registry files by hand
  • installs the cable to the USB port at the back (after having tried both ports at the front) of the computer
  • rebooted the computer several times
  • hard starts the phone by removing the battery
  • plugged in, removed and replugged in the phone.

  Also:

  • The phone is properly install when I plug it in, but the software still does not seem to see it.
  • In Device Manager, the BlackBerry appears under portable devices. Double clicking on it gives me the message "this device is working properly." of reassurring.
  • The Com1 port is working properly, according to Device Manager.
  • A double-click on the icon of the Device Manager to get the properties indicates that the Com1 port is "disconnected" - when I try to set it up, it appears just back to the disconnected state.

  If someone has an idea or something that I have not tried, I'd be happy of course!

  Thank you!

  K

  

  

  Good, people, after a phone call from 3 1/2 hour with a (very patient) phone support person to Blackberry, here's what I learned.

  You can check your drivers USB in this way:

  1. Plug your phone into your USB key. Assuming that your Blackberry is "seen" by your computer...
  2. Go into the Device Manager on your computer (Panel)
  3. Expand the Universal Serial Bus controllers at the bottom of the list item
  4. Right-click on the BlackBerry smartphone, and then select Properties
  5. Click on the driver tab
  6. Click the driver Details button
  7. You should see a driver. I saw two. The one like the BlackBerry is the RimUsb one.

  So here's what NOT to do: we threw any driver who has been the "extra". This actually made using my mouse and keyboard cannot, because they are USB and my poor husband has sent in the basement to find a million-year-old keyboard (and mouse) with the old fashioned type of connectors (PS2). Bleh. Don't, don't.

  Here's what I did that worked (not saything this will work for you - it changes the registry to a backup system with this backup and restore if you are nervous about this kind of thing):

  1. On the start menu, choose run and type regedit into the registry editor.
  2. Follow this path to the file: HKEY_LOCAL_MACHINE, SYSTEM, CurrentControlSet, Control, computer, class
  3. Click: {36FCE60-C465-11CF-8056-4445535400000}
  4. If there is an article called law "UpperFilters", delete it. (See photos)

  Hope this helps someone.

  Karin

  First photo: Watch 'before '.

  

  Second picture: displays the full path of the file and 'after '.

  

• Cannot get rid of the empty Capture window

  I've been video capture from VHS tapes to a VCR by a Canopus ADVC-55 analog-to-digital converter.  I use Windows 7.  It worked OK, but at one point, first Elements 9 froze when taking and I aborted it via Task Manager.  When I reopened it PE9 a capture window empty blocking work area appeared (see Figure).  The window cannot be closed or moved, but can be resized.

  I have made several attempts to get rid of him.

  -J' started another video capture, which opened a new capture window without getting rid of it empty.

  -Starting a new project doesn't have a window.

  -J' uninstalled and reinstalled PE9.  The empty window always opens when I start the program!

  The program is still usable by resizing the window to small so large that I can access the controls, but I would appreciate any advice to get rid of the stupid thing.

  

  Welcome to the forum.

  It's a new one on me.

  First thing I would do would be go to the fenΩtre > reset the workspace and we hope that it clears.

  Hope that helps and good luck,

  Hunt