printer cannot be contacted over the network
I have a HP deskjet 656 printer that I added as a network printer. I installed it on my computer laptop windows 7, which went well. However it does not print. The touble shooter printer tells me to 'the printer cannot be contacted over the network. It works from another laptop I have but not my laptop Windows 7.
I had a similar problem with my new Windows 7 laptop. After a power failure, the laptop would not recognize my HP printer and the error was that "the printer cannot be contacted over the network" so I spent a lot of time to solve the problem. Finally helped the simplest thing was that I removed this printer in my list of printers and added again using the "Add a printer" Wizard and it worked perfectly!
Tags: Windows
Similar Questions
-
hp 8600 printer cannot be contacted over the network and the printer is not enabled.
hp 8600 printer cannot be contacted over the network and the printer is not enabled.
the HP software installed on the PC on the floor. Print wireless from PC upstairs and the PC in the basement on the network for the last month up to yesterday
Now to receive above - two error messages cannot be contacted ove RL network and the printer is turned off.
Reality - the printer IS on and the PC on the floor can print to the printer. Network on the printer symbol says it is connected to the network.
a reason any PC in the basement all the cant suddenly find the network and the printer?
Hello
The first thing I would do is follow step 6 in this document to set a static IP address: http://support.hp.com/us-en/document/c02817031
When it askes for the DNS information, enter in Google DNS. Preferred DNS = DNS Alt = 8.8.4.4 8.8.8.8This could increase the stability of the network connection to the printer downstairs. If this does not help, let me know what OS is on the computer causing problem, because that could cause a problem? Other than that, you can check the quality of the signal you get form the network and see if this can be a problem.
-
No matter what I try, I can't have my printer to connect to my laptop. Continually, he said "cannot be contacted over the network, the network administrator. I made this and conducted many helps out.
What can I do now?
Thank you.
Pamela
Hi Pamela,.
This must be different. Rest assured that we would do our best to help you.
Please answer the following questions that would help us to understand the issue.1. What is the brand and model of the printer?2. What are the troubleshooting steps you have tried so far?3. were there any changes made to the computer before the question?4. how you try to install the printer?Read the following article that helps you identify and fix common printer problems in Windows.Printer in Windows problemsIf you have any questions do not hesitate to answer, we would be happy to help. -
RICOH Aficio 1045 Pcl 6 cannot be contacted over the network
I am running Windows 7 Pro 64-bit and I try to install a printer multifunction Ricoh Aficio 1045 on a network. I was able to do a typical "add a printer" and everything seemed fine, but I can't print. When I run the troubleshooting printer I get the following error 'printer RICOH Aficio 1045 Pcl 6 cannot be contacted over the network. He said to contact my system administrator. I don't have a system administrator. I'm open to any ideas on this one.
Printer driver from the site Web RICOH (PLC 6 pilot - worm. 3.1.0.0 r31047en)
Intel i7 - 3770 k @3. 5 GHz (8cpu)
16384 MB of ram
AMD (ATI) V over-pants 725 MB graphics card
I actually solved myself yesterday. I installed the printer using its ip address and the PL5e driver and it worked fine. Thank you. .
-
Running Win 7/32 on two different computers HP laptop and updates on 2 iPhones and 2 iPad2s. I also have DirecTV whole House wireless set up through this network. The router is an E4200 of Cisco (Linksys), with the latest firmware and software updates, running Mixed Mode WPA2/WPA encryption.
I installed, removed, rebooted and reinstalled the printer several times and do not see it, other than on the router's routing tables. I am unable to ping and can't see any (other than Cisco) software.
I have tried to use the installation wizard 'automatic' in the menu of the printer #8, has made 'restore defaults', is 'advanced configuration', IP address and used auto and even with the SSID and key, I'm headed to an IP address that is not even close to be part of my network. I tried manual IP and combination of wireless configuration and put the IP address that shows on the Cisco Routing table. I tried "restore default settings", and then reinstalled the software after you have uninstalled and restarted everything. I tried HP Network Diagnostic Utility, and it can't find any problems on my network, another it does not find the printer.
Nothing is allowing me to see the printer, except when I connect it via USB.
Does anyone have any ideas where I can go for an answer?
I found a solution validated by PrintDoc that worked:
A static IP address is always a good idea for a printer:
-Print a the front of the printer Network Setup Page. Note the IP address of the printer.
-Enter the IP address in a browser to reveal the internal settings of the printer.
-Choose the network tab, then wireless along the left side, then on the IPv4 tab.
-On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you know what it is, set an IP address outside this range but not exceeding 254 (the last number of the address). If you don't know it, enter the current IP address.
-Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
-Let the gateway and DNS white. Click on ' applyNow, stop the router and printer, start the router, wait, and then start printing.
After that, you will have to redo 'Add printer' using the new IP address.
-instead of remake "Add a printer", I was able to change the properties of my current setup and add a new TCP/IP port, using the name of the computer, I had specified in the static DHCP entry in my router. Finally, it worked and I'm now able to print again from my laptop and the application of 'Print-N-Share' on my iPad and iPhone.
Thanks PrintDoc! You got me most of the way and I managed to finish it.
-
My printer is wireless. When I hit print nothing happens. There is an error message in the State.
Hello
I suggest you to follow these steps and check if that helps:
Method 1:
Try to run the printer Troubleshooter and check that if it helps, here is the link:
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-TroubleshooterMethod 2:
Try to run the below fixit and check if this may help:
http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-printIt will be useful.
-
Is there a problem with the printer on and not on the network
Hello
I have a home network wirelessly with a computer (64) of windows 7 and a Photosmart c7280 printer all-in-one. When I look on the network, I see my network card and at the bottom it says printer cannot be placed on the network. I then click on see other devices on the network and I can see my computer, router, media player and the same printer - at least of the same name - as a device that could not be placed on the network. Is this normal and is it a problem to have it. The name that I see in these two places is the hostname I gave the printer. Thanks for any help.
Hi rayjohn,
I think that what you see is the printer as discovered by Universal Plug and Plug, known as UPnP. The main feature of this, he seems to find the printer and the host name is part of the same name. You really can't get rid of it because it comes right away again when Windows find the printer on the network. It can be ignored as it will not interfere with normal HP software that can be installed on the computer.
-
I'm trying to print from my Win7 x 64 laptop over the network (homegroup or workgroup) to an enslaved Dell Photo AIO Printer 926. When I look for the computer on the laptop, I find, it seems to be fine, but when I print a job, the print job is in the queue on the laptop and does not send the job to the desktop printer. I had it once before but a relocation removed. I'm not sure why I see the desktop of my laptop printer but cannot get it working again.
Any advice? Thank you
You need the Windows7 x 64 drivers for the printer (and perhaps software and fimware) installed on your laptop to be able to print using the printer on another computer if he uses another operating system... Maybe when you reinstalled you forgot to install these things. Try this and see if you can then print.
If this does not help, please post in the Forums Windows7; http://social.answers.Microsoft.com/forums/en-us/category/Windows7 where Windows7 experts will be happy to help you.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
LaserJet P2055DN - do not print over the network
Configure the printer last night as a network printer (which replaces a former 2300dn LJ). It would not print a test page. To verify that the printer was good, I have loaded the drivers on my laptop and connected via usb. Was able to print a page of test via USB. Disconnected usb and reconnected power cable. Released and reset the ip address. Verified the ip address in scathing of the host. When I ping the printer I usually lose half of the packages. There are two other HP printers on the network, a P2015dn and a color 2605dn LJ. Ping their IP back to 100% with a ttl = 255. Ping the p2055 produced 4 packets sent, 2 packets received, 2 lost packets, ttl = 64 2 returns. I changed the printer cables and exchanged the network switch ports (verified the network switch ports by printing to the LJ 2605) with the same result. I can't get the internal web server to mount, or it partially displays or combinations of these. If this was the old style removable print server as in my lj2300, I could swap out, but it's not like I can do with this model. When I send a test page to the printer, it displays "printing", the green light on top flashes, the activity on the network card light flashes, but nothing happens. Finally, I get a «this document failed to print "notification on the host, but the printer still says 'printing' and the lights are still flashing.» Anyone have any ideas? I think I'm looking at a bad network/print the server maps in the P2055.
I also had problems printing over the network to the hp p2055dn. There was no problem via USB printing. All the network settings were ok. Can ping, etc...
Number of days of bickering, finally found that the Config.Security Network should be reset on the physical control of the printer Panel.
Press Ok on the Control Panel printer--> press down arrow, you get to Setup Menu Network Config--> press Ok--> a number of arrows down you get to Config network. Security--> press Ok--> you have two options - keep or reset--> choose Reset... Network printing should work fine.
-
HP 2520HC: install the software of the printer over the network
Hello
I use the HP 2520HC series at the office. I use a network connection.
Printing works fine, however I want to be able to scan as well. I downloaded the printing software, but the only option I choose, connect via USB? The printer is connected to another PC, so this isn't an option.
Please help me.
Hello
such a USB printer allow only all features on a directly connected USB computer.
Sharing a printer over the network allows sharing of a printer, Windows don't offer any scanner, the sharing feature.
You can print from another PC to a shared printer, you will not be able to analyze such, to analyze the use of the computer connected directly to your printer via a USB port.
Kind regards
Shlomi
-
HP ENVY 4520: HP Envy 4520 - refusing to Scan over the network
Hello
We currently have a HP Envy 4520, which print, however don't scan or copy over the network.
I have downloaded and run the HP doctor tool, but it crashes to Windows Image Acquisition (WIA). This article has been read a few topics here, I restarted the following three services:
- Remote procedure call (RPC)
- Shell Hardwarew
- Windows Image Acquisition (WIA)
Once I finished at the outset what precedes, the scanner worked as expected. However after a reboot - the problem is more severe. The doctor program crashes at the same section and restart services fail to achieve something.
All software and drivers are up-to-date by using what has been provided on the HP website.
The error messages vary as well, for example Adobe, I see "fatal error. Commissioning stopped. "
Hi @DocCottle
Thanks for your response!
I managed to solve the problem. After you reset the windows service, you must then make sure that the printer restarts too! I didn't do that. Once done all is well!
-
Hello everyone.
I have a question quite simple and intuitive. Yet Google does not seam to get the answer.
Basically, I'm curious why should we catalogued something? It seems to me that it's just a little like a "band-aid" for editing data in conversion to a new data type, when it is not properly declared with an appropriate data type. What would be the advantage of this?
Furthermore, I see a lot of data type casting to U8 programs before sending it over the network. Various reviews say it's for speed, but I can't understand how it improves speed. The same amount of data is still sent, just in a different type of data. This is overcoming a limitation of the network. The network somehow send smaller data types faster?
I've been curious about this for a while and have yet to find an answer. Any help is appreciated.
Thank you
Taylor S. Amareltsa256 wrote:
Basically, I'm curious why should we catalogued something? It seems to me that it's just a little like a "band-aid" for editing data in conversion to a new data type, when it is not properly declared with an appropriate data type. What would be the advantage of this?
It really depends on the specific situations.
For example, some functions explicitly require certain types of data as inputs if they are not polymorphic.
This means that if you do not convert the data yourself and you will see a red dot forced LabVIEW will do it for you.
As to why the data was not the correct data type in the first place, it is sometimes inevitable.
A few examples
-What happens if you just read a text file as a long string.
If there is digital data in this file, you need to analyze, and then convert it to a usable type (int, sgl, dbl, etc.)
-you are given a 3rd part VI, dll, etc. that returns a numeric value as a double, but you need the value to I8.
You cannot change the output of the function given to you, so what you can do to remedy this situation is cataloged data.
tsa256 wrote:
Furthermore, I see a lot of data type casting to U8 programs before sending it over the network. Various reviews say it's for speed, but I can't understand how it improves speed. The same amount of data is still sent, just in a different type of data. This is overcoming a limitation of the network. The network somehow send smaller data types faster?
Somehow, this is my first response, but in a more general sense.
Many functions down to the level of the OS run in binary.
If your data are not already in binary, the sending computer must convert it to binary, and then send it, have the receiving computer convert in return.
Two conversions on each side of the transmission add unnecessary delays.
-
Error found: iP1600 printer can be connected to the network
Title: Problem of networking; model of the host is running XP and can not print from computer laptop/WIN 7
Hi, my host comp. is running WIN XP and laptop WIN 7. I've already updated the printer driver Canon witch is connected to the host model. On the hardware of the laptop I can see the printer is on a network, but... cannot print the test page / troubleshooting of the error found: iP1600 printer can be connected to the network.
I also downloaded on laptop CanonPrinter add-on driver, this driver necessary?
Hello
I suggest you install the drivers for PIXMA iP1600 on both Windows XP computer and check if the problem persists.Hope this information helps. -
Bought one from Best Buy Apple Watch that had been returned. Original purchaser cannot be contacted. The phone is synchronized to their account, how can I sync to mine?
You can not. Take it back to Best Buy and ask for a refund.
-
WHS backup
You just bought a new WHS 2011. Question, can I restore the backup made by WHS v1. PP3 the WHS 2011? Or do I need to copy the files over the network of old serevr again?Hello
Because the problem is with Windows Home Server, I recommend you post this question in the Forums Windows Home Server.
Maybe you are looking for
-
Updated firefox and it won't start now.
Do you have an auto update this morning and now I can't start Firefox. Don't want to lose my bookmarks if I have to uninstall and reinstall. Any suggestions?
-
to run several DAQmx AO tasks at the same time
Is there a reason any cannot perform several tasks DAQmx AO at the same time?
-
I just bought a p6533 and have problems with the sound. The speakers are built into the screen and when I do the test sound it beeps, but when I go on line there is no sound at all. As far as I know that everything is connected properly. When I go
-
How can I change the way files are displayed in a library?
The foregoing is organized by folders, grouped by file Type and sort by name. This is my favorite. Note how clearly and Excel 2010 files are classified under the category "Microsoft Excel Worksheet" but all others, circled in red, are listed under
-
How can I install my windows 7 sarter on a memory stick?
I wanted to know how to install windows 7 starter edition to my 15 GB memory stick