Cannot get DAQ Assistant in Labview to cDAQ 9184

Similar Questions

• How to find the DAQ Assistant in LabVIEW student 2009 Edition

  I got 1 Core and Core 2 in LabVIEW 2009 prices in June. When I went to use the student edition I have LabVIEW 2009, I couldn't find the DAQ Assistant. This will present a problem when I come to use it in class this fall. It works fine on my version 8.5.

  You must install DAQmx, just like you had to do with 8.5.

• Computer laptop HP G62t-350 cannot get Remote Assistance

  Windows 7 Home Premium

  Laptop G62t-350

  TeamViewer

  ISP Comcast

  -------------------------------------

  Recently, I contacted Hewlett-Packard technical support with problem in my laptop HP G62t-350.

  Their tech wants to take control of my laptop, so I initiated the request. Their technician is recognized and I accepted the remote control.

  He kept showing "to leave, please wait...". "and we are never connected.

  Last week, I contacted my ISP Comcast and, even once, they wanted to take control of my computer using TEAMVIEWER.

  We were never connected.

  As you can see, there is a problem with Remote Assistance.

  Can you help me to solve it?

  Thank you.

  This morning I called technical support for HP and the technician fixed it:

  The problem was that Usersname administrator has been corrupted:

  1 - created a new usersname (HP) - tested remote access and has worked very well.

  2 - deleted my original usersname

  3 - recreated my original usersname - tested remote access and has worked very well.

  4 - remove the new Usersname (HP)

  5 - tested the remote again and worked fine.

• missing 2013 LabVIEW daq Assistant

  I do not see the DAQ assistant in Labview 2013!

  LabVIEW 2013 + real-time + fpga

  Max 5.5.1

  Visa 5.4.0

  August 2013 device driver

  Why?

  Thank you

  
  

• DAQ Assistant

  Hello

  I'm a new user for Labview.  I couldnot find DAQ Assistant.  Please suggest me some ideas to find out the same thing.

  or do I need connect my laptop to the material so that I will get the DAQ Assistant, in my software.

  Please help me

  Thank you

  Dembélé

  The DAQ Assistant is not installed with LabVIEW but with DAQmx. If you have installed the drivers for a DAQmx device, this will install the DAQ Assistant in LabVIEW. It is found on the measurement of e/s palettes > DAQmx - Data Acquisition.

• Tasks of the DAQ Assistant

  How to create a task in the DAQ Assistant of LabView for one of our modules cDAQ without actually being connected to the cDAQ module?

  You can simulate a large number of instrument supported by DAQmx with Measurement & Automation Explorer.

  Right-click on the NOR-DAQmx devices and then create new, then simulate and choose from the list of supported devices.

  For the cDAQ chassis first then your module.

  Excuse me, but I don't have an English version of MAX and so I did not have the correct translation of command...

  When your simulated device is configured, ca use you it with the DAQ Assistant in LabVIEW.

• Meilhaus 3106 MAX/DAQ Assistant questions

  Hello

  While I'm sure that you all have grown tired of my usual throat-clearing, I'm a relatively inexperienced developer, so apologies in advance if this question is incomplete or missing otherwise.

  I recently got a Meilhaus electronic RedLab 3106 DAQ.  Box manual is at: http://www.meilhaus.org/downloadserver/redlab/manual/RedLab%203106_en.pdf

  Attempt to use this device after completing installation 'Quick Start', I discovered that the data acquisition was not read by MAX (v5.0). In addition, by attempting to use the DAQ Assistant, in LabVIEW 2011 for this box DAQ (which I did successfully on this machine with a DAQ USB of NOR-6008), I discovered that the device is not listed with the text "no taken physical channel supported" that appears when the registration of the channel would be generally.

  Normally, I try just a reinstall of the drivers/software 3106 package, but the strange thing is that Windows (XP - SP3) gives me the bubble 'New hardware found' when the USB fuelling the DAQ cable is connected to the computer. In addition, the acquisition of data can be read by a program that came with the acquisition of data called "InstaCal", including an order to make the power led on flashing box. Finally, a universal library, which also comes with the DAQ hardware has itself installed successfully in LabVIEW under "User Libraries". Given this feature, I am convinced that it is simply not possible to use the DAQ Assistant in LabVIEW for this particular data acquisition or that there is something in LabVIEW/MAX in need of fixing.

  Someone knows a problem similar to this with the 3rd party hardware (ideally, Meilhaus) and software of NOR? If so, how do fix you it?

  Kind regards

  MG Wilkinson

  Material acquisition of third-party data is not supposed to be detected by MAX or used with the DAQ Assistant. Thus, simply use the functions you provided.

• problem with install two DAQ in a PC and missing DAQ assistant

  Hello

  I have two 6023E DAQ cards and 6024 and each card has its own DAQmx (DAQmx Vresion 8.7 for 6023E DAQ) and Version 9.1.7 for DAQ 6024

  and I want to install the two ofl these cards together in a PC with LabView 8

  After LabView installation and installation of cards if I install the drivers of DAQmx version 8.7 I don't miss assistant DAQ but NATIONAL & MEASURMENT > DEVICE INTERFACE AND I DAQ 6023E in traditional mode and I can not use traditional DAQ and the DAQ assistant in labview 6024 is also not recognized

  If I install DAQmx worm. 9.1.7 in NATIONAL & MEASURMENT > DEVICE INTERFACE AND I the two DAQ (not in traditional mode), but I've lost assistant in LabView DAQ

  What should I do?

  Please help me...

  Problem solved:

  I have install LabVIEW 2009 and then install DAQmx 9.1.7 and the problem resolved

  Thanks to all the bodies of their response.

• Cannot start assistant in LabVIEW DAQ

  Hello

  I can't launch the LabVIEW DAQ assistant, but I can do it Max MAX DAQ's not flexible because I can't custom code or convert.  I tried all different ways to open the DAQ assistant and I finally realized something, on the block diagram, I open Tools/Advanced/Edit palette/Express/entry/data acquisition is missing (question mark) and many more functions are missing.

  I use the Labview 8.6 and NIDAQmx 8.7.1 evaluation software

  Can you please tell me what the problem is. I really need to launch of NOR-DAQmx, LabVIEW.

  Rgds

  Paul

  Hi Christ,

  Thanks for the fast service, I did as you said, but it didn't fix it. Basically, there are many media NI LV (8.5 and down) any brand with an X, I selected (highlighted) of Labview Signal Express support, since it was just the support NI LV as you said in the email (there is a message of side will not install it) then I click Next and finish ,. Reboot, lauch labview, move on to block diag/check on Experss VI on the function palette/entries, but lack even). I have als don't have reinstall Labview.

  I don't know if you have a plan B, because I'm stuck or if you can send me a screen shot or dialog of what I do; that will be great.

  Thank you

  Paul

• DAQ Assistant is not in LabView

  Hi all

  I use NEITHER cDAQ-9174 and NI 9203.  I have already installed the driver for the NI 9174 cDAQ, which is NEITHER-DAQmx 9.8.0.  I can see the device when I opened NI MAX. However, when I open LabView 2015, I can't find DAQ Assistant in the function Palette. I noticed on the chassis, 'ACTIVE' light is not on while two other "POWER" and "READY" light is on.  I look in the forums OR but I can not find the solution.

  Any suggestion, please help!

  Thank you!

  DAQmx 9.8 is not compatible with LabVIEW 2015.  You must use at least DAQmx 15.0.  See here for more details: NOR-DAQmx and LabVIEW compatibility

• In Labview 8.5, what happens if the input signal exceeds the scope of the signal defined by the DAQ Assistant?

  Hi all

  This should be a pretty simple question, but I can't seem to find the answer online and currently do not have the functionality to test this:

  I'm using LabVIEW 8.5 and have a VI that imports data from sensor through the DAQ Assistant. In the configuration tab, there is a range of signal input. What happens if my sensor exceeds this range? I get a warning? The default value is the maximum (or minimum)? I was interested in writing a code to display an error that I approach the limits of this range, but did not know if I also need to include code to display an error if the scope is exceeded as well.

  Thanks for the help,

  Tristan

  Hello, Tristan,.

  The behavior depends on the selected range and the device you are using.

  If you are using a device with a single input range is valid, we will use this range, even if you set a smaller minimum and maximum in the DAQ Assistant.  So, if your device only supports ±10V and you set the range to ±8V, you will still continue to get valid data after your top sensor 8V until what you approach 10V.  When you reach the limit of the extent of your device, the output will be 'rail', and simply return the maximum value until the signal is less than the maximum value again.

  Note: A device that is nominally ±10V usually has a go-around (such as ±10.2V) which are usually specced in the manual.

  However, if you use a device with several ranges of entry then things become more complex.

  NOR-DAQmx player will choose the smallest range that entirely covers the interval you choose.  For example, suppose that your device supports the following input range: ±0.2V, ±1, ±5V, ±10V and you choose 0V - 3V as the range in the DAQ assistant.  The NOR-DAQmx driver will focus on the input range and the list of the entry lines that your hardware supports and choose the smallest encompassing the entire range that you set.  This would be the ±5V, because this is the only beach that contains up to 3V.  Thus, all between ±5V input signal is returned and none outside this range will be 'rail' to the maximum or minimum value.

  We do this because using small beaches make more efficient use of the resolution of the ADC.  So, we try to use the most effective range based on what you ask without picking up a range that will make you miss data.

  Let me know if I can clarify it more.

• Does not recognize NIPXIe 6535 while working in LabVIEW after selecting DAQ Assistant

  When you work in LabVIEW to generate a PWM Signal, need a DAQ Assistant either generate or acquire a signal. In the DAQ Assistant we must select the assesories as NIPXIe 6535 material or 6236 or 6711 to output the signal. During this process, only NIPXIe 6535 can be recognized. It has been a serious problem, so please suggest me with the remedies as soon as possible.

  1. No, you don't need the DAQ Assistant. You even don't need to use in a serious application! You need to learn to be programmed with DAQmx screws.
  2. When you can not select the module mentioned above in the DAQ Assistant, could also check you with MAX (Measurement and Automation Explorer)? You see this HW module in MAX?
  3. If MAX cannot recognize this module, you may have a driver problem. Have you installed all the required device drivers? Please provide the version of the OS and number of bits (64 or 32-bit), version of LabVIEW and number of bits, DAQmx version, etc. You can see the installed software and driver, Max under the heading 'Software' (fill in the list and make a screenshot).

• DAQ Assistant do not find channels of the cDAQ

  We recently bought the Compact DAQ and two thermocouple modules 16 channels.  I am trying to change a code to use a Pico USB logger for the cDAQ and I'm trying to follow the examples found on your Web site using the DAQ Assistant.  Initializes the DAQ Assistant, and I choose analog input for the selection of Signal acquisition.  When I select the option of Thermocouple temperature section, it says "reading of Lecture de Configuration Configuration of the system, please wait...". "but it never picks the cDAQ channels.  I installed drivers and recoginizes of the USB port on the device (and the light indicates that it is in "ready" mode), but it has never been "Reading System Configuration."

  Thank you for your time.

  Solution has been found.  It turns out that the data folder was corrupted files it contains.  Once that I deleted it MAX started to work very well.

• problem with the on LABVIEW DAQ assistant.

  I have a LABVIEW student edition. I needed to use NI USB-6008 to acquire the signal, but I do not see "DAQ Assistant" on the Express > entry in the block diagram pane anytime, I opened a new VI. Any help will be appreciated.

  Thank you.

  
  

• Impossible to find in LabView DAQ assistant

  Hello! I installed the driver NOR-DAQmax 9.3.5 after installing LabView 8.5 Student edition and I'm not able to find the DAQ Assistant, in the function palette. Could you please let me know what else I could do?

  Thank you!

  Hi cmorale4,

  Find this article in the DAQmx driver compatibility and LabVIEW, if you have the latest driver that you can install and use with LabVIEW 8.5 should be OR-DAQmx 9.3 you can find here.

  The best method is to remove all the drivers you have installed so far, you can do a registry clean with CCleaner and then proceed to the installation of version 9.3

  Kind regards