Cannot get location using the network provider

Similar Questions

• Cannot get rid of the network

  I have a vcenter server 5.0 with 2 hosts.  When I migrated a lot of virtual machine to another group of ports in the "VM Network" group, most of them show they are now linked to the port group that I moved and the former group VM Network.  the vm network group shows as inactive and I deleted the network of the vm from the two hosts.  If I connect to the host individually this network does not appear.  In vcenter, if I go to networking, I see that VM network listed there, and it shows the VMs still plugged on.

  I'm guessing that there is something wrong with the database, and this port group is not being properly served.

  Welcome to the community,

  just a guess. None of the virtual machines have a snapshot active - at the time of his creation--stressed the port group? As long as the snapshot exists, you will see the old port group.

  André

• HP Officejet scan cannot be run, error "Scan cannot be performed because another program or computer uses the network device.

  Hello everyone,

  After you have installed Windows 8 on my desk, I lost the ability to scan with HP (Officejet 8500 pro wireless) solutions Center. Wen I click on scan (rather photo or document) I get a message: "Scan cannot be performed because another program or computer uses the network device. There is a little information on the HP site. I've tried all the suggested solutions, including several install and reinstall the HP software. The printing part works very well, and I can scan with other programs directly using the WIA driver. Now I scan documents to pdf authorizing searches, who wants me that this question be set quite often. Currently, I use my laptop for that. Everything works very well with Windows 7.

  Any help would be appreciated.

  Thanks, Johann

  I contacted HP about this specific problem.  They informed me that it is an upgrade of Windows 8 that Twain issue and they do not support this problem.  Reinstall the current drivers of hp does not help.

• Cannot use the network after the first time backup volume machine

  Hello

  After the update to OS 10.11.4 my MACs are unable to use the network backup volume more.

  The volume of time machine is a device (RAID of LCM InXtron Taurus-S) external USB connected to a server of iMac (also running OS 10.11.4). Four MACs use this device as a backup time volume machine (all systems 10.11.4).

  What I've done so far has been clear the volume (twice) and rename with different names than in the past. Than I started the new backups for all of my MACs. The fist backup works fine for all machines. After it says, that the first backup is over, and he tries to perform the second backup an hour later, it is said that the volume does not support the necessary functions of AFP.

  I am still able to connect to the volume via afp: / /... If the finder (go to). As long as I use the volume for a single machine works. If I announce a backup from another machine, it evokes this error.

  Any suggestions?

  Thanks in advance.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the 'Start-up' (without the quotes). You should now see messages in the log with the words "departure * backup," where * represents one of the words "automatic", "manual" or "standard".

  Each message in the journal begins with the date and time when it was entered. Note the time stamp of the last 'Start' message that matches the start of a normal backup. Now

  DELETE THE WORD 'Start' TO THE TEXT BOX

  so that all messages are showing and highlight the newspaper at the same time, you noted. Select the time-stamped messages since then until the end of the backup or the end of the log if it is not clear. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  If all you see are messages that contain the word 'Start-up', you clear the text field.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. Don't post any more it is requested.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• I can't get my printer to connect to my laptop. It is said repeatedly 'cannot be contacted over the network, the network administrator.

  No matter what I try, I can't have my printer to connect to my laptop.  Continually, he said "cannot be contacted over the network, the network administrator.  I made this and conducted many helps out.

  What can I do now?

  Thank you.

  Pamela

  Hi Pamela,.

  This must be different. Rest assured that we would do our best to help you.
  
  Please answer the following questions that would help us to understand the issue.
  1. What is the brand and model of the printer?
  2. What are the troubleshooting steps you have tried so far?
  3. were there any changes made to the computer before the question?
  4. how you try to install the printer?
   
  Read the following article that helps you identify and fix common printer problems in Windows.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
   
  If you have any questions do not hesitate to answer, we would be happy to help.

• I have a residential group put in place but apple of my wife air does not recognize and it cannot use the network printer

  How can I solve this problem?

  Only Windows 7 computers can join a homegroup.

  You need to set up a working group for non Windows machines using the network functions.

  And if you have a network printer suitable, then it should not matter what OS you have as long as it has drivers for this printer. I guess that you have a SHARED printer and not a network printer in your question?

• My Windows 7 PC cannot see themselves on the network.

  My Windows 7 PC cannot see themselves on the network. Under the heading network in Windows Explorer when I try to extend the C drive, I get an error message saying that Windows cannot access it. Also, I can't access this PC from a PC in 10 Windows on the same network - this error message indicates that Windows cannot communicate with the device or resource. It is available, but it is unresponsive to attempts to connect.

  I have tried turning the firewall off temporarily, but this makes no difference.

  Can access my PC Windows 7 Windows 10 PC and a laptop Windows 7 without any problem.

  Integrated network diagnostics do not come to the top with something useful.

  OT:

  Windows 7 networking

  Hello

  Thanks for posting your query in Microsoft Community.

  • Your computer is connected to the domain?

  There could be several reasons for this cause and to diagnose the problem, we can try the following steps and check.

  Step 1: Check if the network discovery is turned on.

  Please refer to: enable or disable network discovery

  Step 2: Check Event Viewer for detailed information on the problem. Consult the following links.

  Open event viewer

  What are the information in event logs? (Event Viewer)

  Step 3: Search the computer browser service, if it is running.

  1. click on Start, type services.msc in the start search.

  2. search for the computer browser service.

  3. right click on the computer browser service and select Properties. Check if it is started.

  4. If it is stopped, select Start or restart. Make sure that the service is started and set as Automatic.

  5. click apply and OK, if you make any changes.

  Step 4: Temporarily try to disable the antivirus on the computer program and check if the problem persists. If you are able to connect, you may need to check for updates and firewall settings in the security software.

  Note: Check that you activate your anti-virus protection on the computer back after you complete these steps. It is not recommended to disable these settings on the computer. It's just to solve the problem.

  Disable the anti-virus software

  Step 5: Make sure that the name of the network working group is the same for all computers. Also try disabling some protected sharing and check for the issue.

  1. Open advanced sharing settings by clicking theStart button, thenControl Panel. In the search box, type network, click network and sharing Center, and then in the left pane, click change advanced sharing settings.

  2 click to expand the current network profile.

  3. by password protected sharing, click turn off password protected sharing, and then click save changes.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Also, try to perform a SFC scan to see if it solves the problem. Read the following article.

  Use the System File Checker tool to repair missing or corrupted system files

  Also refer to:

  Networking of computers running different versions of Windows

  Why can't I connect to other computers?

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• I get an error code whenever I start my computer. I have loaded several packs of registry repair software but cannot get rid of the message. The message bed error loading c:\windows\system32\pofusido.dll the specified module is not found

  I get an error code whenever I start my computer. I have loaded several packs of registry repair software but cannot get rid of the message. The message bed error loading c:\windows\system32\pofusido.dll the specified module is not found

  Hello

  I googled this file pofusido.dll and it could be caused by a virus.

  I would suggest that you disable the restore mode as viruses use it to reinstall set apart them.

  Download and install the free http://www.malwarebytes.org/

  Restart the computer and keep pressing F8 to get into safe mode with network connection.

  Once you have updated Malwarebytes run and see if it can remove the virus.

  So delete all cookies in your internet Explorer.

  Please keep in mind that my answer is based on the information in your message. More the better I can answer, Slan go foill, Paul

• RICOH Aficio 1045 Pcl 6 cannot be contacted over the network

  I am running Windows 7 Pro 64-bit and I try to install a printer multifunction Ricoh Aficio 1045 on a network. I was able to do a typical "add a printer" and everything seemed fine, but I can't print. When I run the troubleshooting printer I get the following error 'printer RICOH Aficio 1045 Pcl 6 cannot be contacted over the network. He said to contact my system administrator. I don't have a system administrator. I'm open to any ideas on this one.

  Printer driver from the site Web RICOH (PLC 6 pilot - worm. 3.1.0.0 r31047en)

  Intel i7 - 3770 k @3. 5 GHz (8cpu)

  16384 MB of ram

  AMD (ATI) V over-pants 725 MB graphics card

  I actually solved myself yesterday.  I installed the printer using its ip address and the PL5e driver and it worked fine.  Thank you. .

• Loopback adapter cannot connect past "absorbing the network address.

  well, then I'll put up my loopback adapter (windows xp btw) and iI marketing my loopback adapter, it is like 'Local area connection 64' and it cannot go beyond "absorbing the network address"... and when I click on fix it just expires itsself. And so I am unable to use it...

  Help?

  Right-click on the adapter, and then click Properties.  On the property page click on (highlighted) Protocol Internet (TCP/IP) and then click the properties button and give an IP address to the card.

  John

• printer cannot be contacted over the network

  I have a HP deskjet 656 printer that I added as a network printer. I installed it on my computer laptop windows 7, which went well. However it does not print. The touble shooter printer tells me to 'the printer cannot be contacted over the network. It works from another laptop I have but not my laptop Windows 7.

  I had a similar problem with my new Windows 7 laptop. After a power failure, the laptop would not recognize my HP printer and the error was that "the printer cannot be contacted over the network" so I spent a lot of time to solve the problem. Finally helped the simplest thing was that I removed this printer in my list of printers and added again using the "Add a printer" Wizard and it worked perfectly!

• why we use the network module

  Why use the network module? What is the purpose of it

  Hello

  When you buy a switch or router, it comes with some default interfaces and some empty slots.

  The default interfaces are usually ethernet interfaces; However, router or switch supports more types of interfaces. You can order and buy these interfaces according to your needs. New interfaces in the form of modules can be put inside these empty slots. Suppose you need a WAN connection between two places. If you buy a module WAN. It's like buying a card your computer's ethernet. Or you need to connect fiber optic cables to your router, you will need to purchase a module with a fiber interface.

  There are two types of module and also two different locations on the routers. Small slits are WIC and bigger for NM (network module)

  Module 1-network (your question).

  This is a great module which can contain a variaty of ports and also some NM modules and some WICs. These modules can usually be inserted into larger routers.

  2-

  WIC is smallest card that can be inserted into a router dirrectly or some cards NM.

  WIC and NM are a little old and today HWIC and NME are mainly used.

  Please click the link below to check the different types of module for router 2800. Take a look at modules with the prefix of NM, NME, WIC HWIC.

  http://www.Cisco.com/c/en/us/products/routers/2800-Series-integrated-SER...

  It will be useful,

  Masoud

• hp 8600 printer cannot be contacted over the network and the printer is not enabled.

  hp 8600 printer cannot be contacted over the network and the printer is not enabled.

  the HP software installed on the PC on the floor. Print wireless from PC upstairs and the PC in the basement on the network for the last month up to yesterday

  Now to receive above - two error messages cannot be contacted ove RL network and the printer is turned off.

  Reality - the printer IS on and the PC on the floor can print to the printer.  Network on the printer symbol says it is connected to the network.

  a reason any PC in the basement all the cant suddenly find the network and the printer?

  Hello

  The first thing I would do is follow step 6 in this document to set a static IP address: http://support.hp.com/us-en/document/c02817031
  When it askes for the DNS information, enter in Google DNS. Preferred DNS = DNS Alt = 8.8.4.4 8.8.8.8

  This could increase the stability of the network connection to the printer downstairs.  If this does not help, let me know what OS is on the computer causing problem, because that could cause a problem?  Other than that, you can check the quality of the signal you get form the network and see if this can be a problem.

• Installed Adobe Acrobat Standard XI on 2 computers using the 2 provided licenses. I need to take this on one computer, and add to another computer in the office. How can I do this?

  Installed Adobe Acrobat Standard XI on 2 computers using the 2 provided licenses. I need to take this on one computer, and add to another computer in the office. How can I do this?

  After getting your serial number, open the Acrobat none-more-necessary > help > deactivate.

  install and activate on your other computer.

• Satellite A500-1GL: it is advisable to remove the battery when you use the network

  I know this is a silly question but its actually something I know not so thought I would ask.

  I almost always plug my laptop into the supply line (satellite a500 1gl)
  I was wondering have you actually keep the battery installed even when using the electrical network.
  Or is it really advisable to remove the battery when you use the network?
  I didn't know if the battery should always be in place.
  Thanks for your help
  Torti

  Hello

  A few years ago it was recommended to remove the battery of the laptop if the AC adapter is plugged. What keeps the constant charge battery
  New age of batteries are better you can leave the battery in the Bay it s ok and it should not affect the performance

  However, sooner or later each battery would die it s only a matter of time, you know