Cannot get the notification if the client has been disconnected and then become online
Hello
I use notification service Pap BB and I have send a notification to the customer of BB and he got the notification correctly while it is online.
But if I send a notification, while the mobile was disconnected , then again online , no notification received.
Please notify
Hello
Just for future reference, try to avoid putting your device PIN, appid, password, and the full URL of PPG in your post on the forum.
From your sample code, it seems like you were missing the initial "cp" right after https:// and before your content provider ID.
The publicPPGAddress must be of the following form:
https://CP {cpid}.pushapi.eval.blackberry.com/mss/PD_pushRequest where {CPID} is replaced with your content provider ID
Let me know if this helps.
Thank you
Matt
Tags: BlackBerry Developers
Similar Questions
-
I started Firefox even if the internet has been disconnected. But before opening, Firefox updated automatically, not advising me that I was disconnected. It shows now that I have the newest version of Firefox. What should I do?
Operating system: Windows XP Professional Service Pack 2.He's going to have downloaded the update while you were connected and the next time you start Firefox, it will have installed upgrading if you were connected or not.
-
Hello, I have a problem and cannot complete the installation of the creative cloud, signature of the photographer, has been convfirmado and I can not download some applications, the latest CLOUDS INSTALLATION GIVES ERROR 201, I DO NOT KNOW HOW to SOLVE IT MORE.
Error 201 & 205 & 206 & 207 or several U43 errors
-https://helpx.adobe.com/creative-cloud/kb/download-update-errors.html
-
HEX 0x8BBB0011 as the connection to the server has been disconnected
Hello
I use a shared variable of the network to control a loop in FPGA in cRIO 9073. 1 for a month, the program was runing without any problem, but suddenly, the VI is thrwoing an error
"HEX 0x8BBB0011 connection to the server has been disconnected.
The error or warning occureed while writing the following shared variable
\\NW-cRio\NW Library\NW_Force_cal
\\169.254.106.130\NW Library\NW_Force_cal ".
A screenshot of VI is fixed, the NW_Force_cal is highlighted.
After the VI has been shut down and restart the VI took over running without problems. This kind of unpredictable behavior is very difficult to manage, I lost data in real time during 12 hours of recording because of this problem.
Please suggest a solution for this problem.
Thank you
Guilhem
The error has explained the issue. The network had problems that led to the server being offline. How to solve this problem is to understand what is meant by "real time". It's just another way to describe a deterministic calculation. In other words, the program ensures that everything will happen within a predetermined period. Order things to be deterministic, they must be controllable. The most obvious way to break the determinism is to prompt the user for entry. As we cannot guarantee clearly not the user will respond within a given period, can no longer call the deterministic program. In this case, we have a more subtle break of determinism. Relying only on a network will break determinism. It is not simply a way to ensure that the network is not getting hit harder than usual. In this case, the network was down for a period of time long enough to raise an error.
Here's where we get to fix things. Once the error has been generated, the code to do with it? The wire of the error is not used for anything else. I expect to raise an error and stop the program. Clearly this isn't the desired behavior. So, why we do not use the wire for an error handling? In case of error, you can connect the data locally. When you cover the network, you can clear the log to the host PC that you usually use to collect your data. This command removes the dependency of your network for the code works. With the help of a more robust code solves the problem with the relatively easy error management. Unfortunately, there is absolutely nothing anyone here can do to ensure your network never loses connectivity.
-
Original title: Lexmark printer
Hello
Thank you for helping me to get my laptop working again - after contacting the Microsoft Community, Microsoft and my ISP, my email seems to work so I can get all my incoming messages.
But I'm still having a problem printing. I tried to uninstall the Lexmark S605 and I get the message error "series Lexmark S600 is currently in use. Wait until the printer has finished printing and then uninstall. "I get this message even if the printer is turned off and unplugged.
Before I tried to uninstall, I tried to update the drivers from the Lexmark site and it says the update was successful, but nothing prints. Printer is no longer supported by Lexmark. Wireless connects, but I have also tried to make it work using the USB connection.
Printer print wireless from office, but not my laptop.
Does anyone have an idea on how to uninstall the Lexmark program?
Thank you
Agnes
Restart your computer and check the queue to printer in the Notification area, as suggested.
Click on the printer
Cancel all Documents
For more information, visit the below mentioned link:
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
Printer problems: http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx
Run the printer problems to: http://support.microsoft.com/gp/printing_problems?entrypoint=WHHT
You can see the below mentioned links.
http://Windows.Microsoft.com/en-us/Windows7/install-a-printer
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers
http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer
http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer
-
Two days ago my internet connection has been cut, and then I tried to find out. I opened the Troubleshoot, it says that I need to install a driver for my network card. I use Windows 7 Ultimate. What should I do? Should I re install windows 7 ultimate on my computer?
Hello
What brand / model of the computer?
There is no need to re - install Windows 7. You just need to install the network card drivers. Check out the link and follow the steps.Automatically get recommended drivers and updates for your hardware
http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardwareUpdate drivers: recommended links
http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links -
Original title: Auntie Photon
Hi all
I use Auntie Photon on windows platform 8, and it shows the device has been disconnected or is not available when clicking on the button connect. For this reason, I am not able to use internet on my Laptop.I also in contact with the customer service and they told me to take the laptop to any engineer to solve this problem.
Help, please.
Hi Varun,
Thanks for posting on Microsoft Community. I understand that you are not able to connect to the Internet using the dongle Auntie Photon. Let us work together as a team and try to get this fixed number.
Please help me with the following information related to this issue:
- You have installed the required software on your computer which came with Auntie Photon?
- Do you see an error or exclamation point in Device Manager when you connect Auntie Photon dongle? See the steps to check:
- Press Windows Key + X.
- Select Device Manager.
- Check if there is no error or exclamation point under Auntie Photon.
This problem can occur if device drivers are not get detected or due to missing/corrupt device drivers.
Please follow the steps mentioned below:
Method 1: Run the hardware troubleshooter
The convenience store is an automated tool that checks the hardware attached to the computer for known problems and provides details on how to correct them. Follow these steps to run the troubleshooter.
- Press Windows key + W on the keyboard.
- Type the Troubleshooting in the search bar and press Enter.
- In the Troubleshooting window, click show all in the left pane.
- Click hardware and devices.
- Click right on material and devices and and select run as administrator.
- Click Next and follow the on-screen instructions to complete the process troubleshooting.
If the troubleshooter could not find and fix the problem, I would suggest trying the following method and check.
Method 2:
Note: Make sure that the Auntie Photon dongle is plugged.
Step 1: You can try to uninstall and reinstall the drivers of Auntie Photon and check. Follow these steps:
- Press Windows key + X on the screen.
- Select Device Manager.
- Expand the network adapter and right click on driver and select Uninstall.
- Restart the computer.
- Windows will automatically load the drivers.
Step 2:
You can also try to launch the Windows updates and install all the updates that are available including the driver in option and the updates of the firmware.
Windows Update: frequently asked Questions
You can also get in touch with Auntie Support and check the updates to driver for Windows 8.
Please answer us on the State of the question to help you further.
-
The session has been disconnected
Hi all
I'm building one laboratory view 5.2 in my office... Because this is a laboratory environment, I could not use router company (I'm not the router admin), so I put an another Juniper 5GT as audit router...
then I put 2 servers esxi 5.1 and 5.2 venter/view
then I clone an ent as view desktop VM win7... then I use my ipad to connect to the server and then connect it this VM Win7... I received a message below
"Desktop load attention".
Your desktop is loading too slowly. You may need to activate your VPN to connect.
Click on 'OK' " "
then he continues to run... and I also check the Web Client to view events... I see that the user account has log on to view & this VM Win7...
After customer view fill the bar running, it shows
"The Session has been disconnected.
Lost connection to server. "
value this juniper IP route default of the machine I need?
Thank you!!
wyldkao
Almost certainly a problem of remote access configuration PCoIP. Just follow the 3 steps here setting up remote access with a view PCoIP 4.6 and newer , and it'll work.
If you still can not configure it correctly, watch the video that goes through him more in detail.
Let us know what it was.
Mark
-
the device has been disconnected or is not available
I can detect the modem Huawei E173 usb and install following the instructions, but when I try to connect, watch the device has been disconnected or is not available.
Help, please!
Currently, my version of the MacBook has been OS X 1 10.11.4
its MacBook Pro OS X 10.11.4
-
In Labview 8.6 and MAX, I can change a scale for a voltage read the string in a task once the application has been built and installed on a second PC. Where's the info of the scale which is held?
Hello
Once you have built your VI and compiled into an executable file and deployed on another machine, it essentially becomes a file read-only, which means that you will not be able to change the balance in this deployed application.
Kind regards
Marcus
-
I follow the plan. But he still need me to buy the app. It shows that the trial has expired. And then I had to buy. He asked to sign and said: I have subscription to use.
-
Since the last refresh of my payment for Adobe enjoy cloud data, I was not able to use the software, not Eve open one of the applications, even the payment has been made and saved to my banck account. I have been a month without service and I've not found a way to communicate directly with any responsible for Adpbe, nor received any satisfactory support of any kind. How can solve this problem? Is it possible to have a personal contact to have a personal support, instead of a jungle of pages on the web that will lead you to more of the same pages?
The CC is waiting for bank payment, if payment is declined then CC will be suspended.
Concerning
Stéphane
-
The order has been confirmed and I received confirmation of payment, but my order is not m
The order has been confirmed and I received confirmation of payment, but there is no mention of this in my order and it does not reflect else anywahere. Please send me the link as soon as possible, otherwise we will take it as a breach of trust.
Hi jennyrajesh
Don't worry, you have placed the order directly with Adobe (online), please check your Adobe account.
Log in to adobe.com to go to My Orders (Here you will find the order No..) Otherwise, you can contact Adobe support they will certainly help you, here is the link for support chat:
-
I use Adobe first Pro CS5. I'm working on a project for a month and this morning, I realized that there is a problem with it. To make sure that I don't junk my computer upwards, I have always to leave the files I'm working with my expansion drive and I work from there. I have autosave all the time, etc, but apparently, at some recent point, my disk expansion has been disconnected, and Premiere Pro tells me that all my files are offline. My biggest problem is that I've renamed all my video files in Premiere Pro, but I not rename them on my drive for expansion. Thus, for them find would probably take me as long, if not more, of my original work. Is it possible in the world that I can record these files and the long hours that I've already spent editing this video? If you have an idea regarding what I can do, I would be eternally grateful. Note: I work with AVCHD clips.
Please, I beg you. Whatever that is would be helpful at this stage.
Make sure that Premiere Pro is closed, and reconnect the drive. Everything should be good when you reopen the project.
The exceptions are two. Bill has raised the first. The second is that if you have already saved the project with offline files. Once you do that, you're done.
-
account has been hacked and then locked
Help, please... My hotmail account has been hacked and then I locked. I was obliged to submit questions to verify my identity and was sent an email with a link to a forum for the status if I had not received an email within 24 hours. I need a PIN to enter the forum which I believe has been sent to an e-mail account disappeared when I I0 - p = 2set my account hotmail years ago what. I had to create a new address hotmail even having to ask for help. Is someone can you please tell me what is happening with my hotmail account. I have very important information that I need to access my account. My email address is * address email is removed from the privacy *.
Help, please... My hotmail account has been hacked and then I locked. I was obliged to submit questions to verify my identity and was sent an email with a link to a forum for the status if I had not received an email within 24 hours. I need a PIN to enter the forum which I believe has been sent to an e-mail account disappeared when I I0 - p = 2set my account hotmail years ago what. I had to create a new address hotmail even having to ask for help. Is someone can you please tell me what is happening with my hotmail account. I have very important information that I need to access my account. My email address is * address email is removed from the privacy *.
Know that it is a forum for peer-to-peer. You don't talk to Microsoft directly here.
The real answer is that you can * never * regain access to your account, because there may be no real connection you can prove between you (as an individual) and the account you are trying to access.
Probably you have not paid to the account, the password was probably not difficult (or if it had probably been changed lately) and once it's been hacked (if it was) a sneaky/destroyer hacker would have just erased everything on it and started using it to spam all what they whomeever they wanted. Although there is a chance that it does not - the chance is equal that he did - if you * are * able to prove somehow this account is linked to you in a meaningful way (this way to be determined by the Microsoft support) and are then able to restore access to the account - you can always get nothing back, you have not backed up elsewhere (backups - they are good for ALL of your electronic data).
Having given you the worst of it - here's what I suggest:
http://www.itechwhiz.com/2011/04/account-recovery-reset-Windows-Live.html
Maybe you are looking for
-
The Firefox HELP tab keeps appearing whenever I open the application or a new window. Firefox 3.6.28, Mac OS 10.4.11
-
Tecra M9 - compatibility of memory resources
Hello I really apreciate if someone having a Tecra M9 (S5515X or S5513X), check the memory resources in the control panel. And inform me which appear on the Device Manager. Please, go to control panel / system / hardware / device managerMenu display
-
Help! May not reflect 2009 Macbook Pro to TV via Apple TV3
Hey all,. Hoping someone can help here. What do I need? I have a Macbook 2009 mid Pro, completely updated through this date with El Capitan, 14/02/16. I also have a 3rd generation Apple TV, that I would use to reflect what's on my Macbook to my telev
-
HP Deskjet 3545 advantage one printer ink while
I can't install the printer. During the installation, when I connected the USB cable from the printer to my computer, it gave me the message, can not install hareware... the HP Deskjet series 3540 module is not found. pl help
-
problem watching a program.
I need to download a specific file for this be possible? can't open it asks me to download a media player, I do, but it just keeps sending me back to the race the page file. what I'm doing, please I need help.