The order has been confirmed and I received confirmation of payment, but my order is not m

Similar Questions

• Can embed you fonts in a pdf file after that the pdf has been created? I received a PDF of an another designer, made a few minor corrections, and now the printer cannot be used because the original pdf didn't have all fonts embedded. Any ideas?

  Can embed you fonts in a pdf file after that the pdf has been created? I received a PDF of an another designer, made a few minor corrections, and now the printer cannot be used because the original pdf didn't have all fonts embedded. Any ideas?

  Use the Acrobat Pro preflight!

  To incorporate the missing fonts in Acrobat Preflight profile will incorporate the missing fonts in your PDF file assuming that:

  (1) the fonts in question are installed on your system and

  (2) the police themselves is not protected against the incorporation (they can at least see and print incorporation.

  -Dov

• In Labview 8.6 and MAX, I can change a scale for a voltage read the string in a task once the application has been built and installed.

  In Labview 8.6 and MAX, I can change a scale for a voltage read the string in a task once the application has been built and installed on a second PC. Where's the info of the scale which is held?

  Hello

  Once you have built your VI and compiled into an executable file and deployed on another machine, it essentially becomes a file read-only, which means that you will not be able to change the balance in this deployed application.

  Kind regards

  Marcus

• My work PC operating system has been recently updated from Windows XP to Windows 7.  An older version of Adobe Acrobat (standard 7) has been installed and reinstalled once the update has been done.  I registered it again online but every time I open a fil

  My work PC operating system has been recently updated from Windows XP to Windows 7.  An older version of Adobe Acrobat (standard 7) has been installed and reinstalled once the update has been done.  I registered it again online but everytime I open an Adobe Acrobat file, a message appears that I need to register even if it is already registered. What can I do to stop this?

  Hello

  Acrobat 7 is not supported and an older version of Acrobat.

  Also, it is not compatible with Windows 7.

  This could be the reason why you are faced with it.

  Please see this link.

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

  Concerning

  Sukrit diallo

• Hello, I have a problem and cannot complete the installation of the creative cloud, signature of the photographer, has been convfirmado and I can not download some applications, the latest CLOUDS INSTALLATION GIVES ERROR 201, I DO NOT KNOW HOW to RES

  Hello, I have a problem and cannot complete the installation of the creative cloud, signature of the photographer, has been convfirmado and I can not download some applications, the latest CLOUDS INSTALLATION GIVES ERROR 201, I DO NOT KNOW HOW to SOLVE IT MORE.

  Error 201 & 205 & 206 & 207 or several U43 errors

  -https://helpx.adobe.com/creative-cloud/kb/download-update-errors.html

• Updated Firefox to update automatically so that the internet has been disconnected, and now it's showing I updated Firefox. What should I do?

  I started Firefox even if the internet has been disconnected. But before opening, Firefox updated automatically, not advising me that I was disconnected. It shows now that I have the newest version of Firefox. What should I do?
  Operating system: Windows XP Professional Service Pack 2.

  He's going to have downloaded the update while you were connected and the next time you start Firefox, it will have installed upgrading if you were connected or not.

• How can I change my password for my email account? The account has been hacked and my previous password is no longer valid.

  This account has been hacked and my previous password is no longer valid.

  View all Windows Live and Hotmail questions in the appropriate forum found here:
  http://windowslivehelp.com/

• My card has been cloned and cancelled, I've updated payment information and payment has been taken, how to reactivate my account. I lost my serial number

  My credit card has been cloned and was cancelled. I entered my new card number and payment has been made, but I seem to have lost my subscription. When I try to turn it back on, I wonder my serial number but cannot locate. How can I get the service restarted

  This is an open forum, not Adobe support... below to connect with Adobe personnel to help

  While the forums are open 24/7 you can't contact Adobe support at any time

  Chat support: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• My friend's e-mail has been hacked and I received a scam 419 asking for $2. 5K "because he was in trouble. My e-mail address will be used to send all the people in my address book a similar message?

  This message was a typical nigerian scam (419), where someone sympathize with you and/or hacks in your email then tells friends, you are in a strange country and someone stole your wallet and $2,500 need related to you.

  Because this happened to my friend, I'm afraid that my own email address has been compromised.

  Microsoft has responded to my report with the type 'keeps' email but does not guarantee that they would take care that my own email would not be for the same uses.  How can I stop my own friends in my address book to my hotmail account to receive the same message "allegedly coming from me?

  Thank you!

  It seems that the only thing they have is your email address that is not desirable, but not a disaster. I suggest you (in this order):

  1 scan you PC for malware using at least 2 good name * anti-malware products. Assuming that you have a product of real-time protection in place (for example, Norton, Microsoft Security Essentials) use it as a. The other could be the free www.malwarebytes.org demand scanner.

  2. now that your pretty confident that your PC is free of malware change your password for a very tough - it is one of the most important things you can do to secure messaging accouunts (such as Hotmail). For advice about strong passwords, see:

  http://www.Microsoft.com/en-GB/security/online-privacy/passwords-create.aspx

  https://www.microsoft.com/en-gb/security/pc-security/password-checker.aspx .

  Always use a different password for each different account otherwise if an account is hacked other accounts is more vulnerabe to be hacked too.

  Finally, if you are really worried then change your e-mail account and close the one they know.

• I would like to know how our organization can recover the license information when electronic mail set up to order the license has been removed and the person retired, please?

  We are a school in Mac OS X 10.6 (Snow Leopard) with Rosetta to Photoshop CS.

  We would like to upgrade the operating system to a newer version, but we are unsure of our status as a license to this product.

  The person who held the access on behalf of Adobe has retired and their email address has been removed. We don't have access to this email account.

  How can we assign a new Member of staff on our behalf in order to determine what licenses we have and how we can buy new licenses for all additional Apple computers to add to the network.

  I tried to navigate the support area, but I found I was going in circles and the titles and descriptions listed did not address our problem.

  Any help would be greatly appreciated.

  Kind regards

  Keith

  Ok... I'll accept that YOU're doing your job, and that others are incompetent or lying to cover up the fact that they did not do their job

  > The person who held the access on behalf of Adobe has retired and their email address has been removed. We don't have access to this email account.

  If you know the email address, you can contact Adobe technical support directly to get the information you need

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME

  Serial number and activation support (non - CC)

  http://helpx.Adobe.com/x-productkb/global/Service1.html

• recovery on usb key, once that the laptop has been cleared and make new copies

  Tried to creat usb and he stopped and he said that only one copy can be made now I'm worried that it won't let me try again I would be able to launch it without losing the only chance I have. I'm having a problem with the creation of recovery media for laptop Hp pavilion computer system on a usb key can help you

  Hi @Phoenix-1921,.

  Welcome to the HP Forums! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  Thank you for posting. I read your post and I understand that when you create the recovery media, it stopped and gave you the message of the one copy can be made. I wanted to help with that.

  Due to licensing restrictions, you can create one HP a computer recovery solution. This message appears when the recovery media has already been created. If you bought a previously used computer or store but the computer was already open, then recovery media has probably been created before you bought the computer and this message is normal. If the computer is less than a few years, then you will probably be able to get a HP recovery solution. There might be a fee according to the status of the security of the computer, the country / region the computer was purchased, and the condition that generated the message. For more information, see looking for USB HP recovery disc or HP recovery discs?

  Let me know if you need more assistance.

  Kind regards

• Account has been locked and cannot access messages or retrieve my addresses. Have not received my new password for Microsoft.

  Have been locked out of my account for seven days

  and cannot access messages or retrieve my addresses.  Cause a lot of stress.  No guard MS saying that they will send me a new password BUYMD.  I've set up account about 14 years and I don't remember my safe Word now.  How can I switch back to my account?  MS wrote they will send my password to the account of spare * address email is removed from the privacy *, but DO NOT.  Is the account I'm stuck on * address email is removed from the privacy * HELP!  Kirsten Ebsen

  Hello

  To expand a bit on the right information to Debbie C.:

  Answers is a peer group supported and unfortunately has no real influence on Hotmail.

  HotMail has its own Forums, so you can ask your questions there.

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/

  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information
  http://support.Microsoft.com/kb/316659/en-us

  Error message "your account has been locked" when trying to connect
  http://windowslivehelp.com/thread.aspx?ThreadId=77be7d82-a0e9-49c7-b46d-040ec654a9e2

  Compromised account - access unauthorized account - how to recover your account
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  Hotmail hacked? Take these steps
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I have Windows 8 on my pc... at a time that the volume control on the screen has been affected and an icon/indicator jumped on my screen.

  When this has been touched an icon/indicator popped up on my screen and therefore not allowing the touchpad keyboard see... I can't find how to make it go away... it will not also allow me to use my cursor to make my sideview control out to shut down the computer... How can I get rid of this?

  Hello Wanda.

  Thanks for writing back and providing the information required as well as the screenshot.

  According to the information provided and the screenshot, the volume icon that appears on the screen is the result after pressing the Volume button on the keyboard. First, open the charm of settings , click on "change settings of the PC", then accessibility > Other Settingsand change the length of time to display the notifications to in the drop-down list box. This will reduce the amount of time that remains the notification on the screen. If this does not resolve the issue, go further.

  To remove the icon of volume you can press the volume button on the keyboard again. This work of keyboard keys based on the drivers provided by the manufacturer, I beg of you download and install the latest version of the drivers for the keyboard to solve this problem.

  Click on the link below to download the drivers.

  Drivers Lenovo idea Centre B540

  Hope the helps of information provided. Let us know the results, so that we can help you further.

• Satellite L300D begins only after the battery has been drained and recharged

  I have a satellite L300D that has a problem at startup. Last week, it closed but got stuck on the "Disconnect" screen for a long time. Finally I manually turn it off by holding down the power button. Don't think no more of him it happened sometimes with my computers. However, when I went to turn it back on - it was nothing. Power lights came to the front of the computer, but not to screen at all. Could not even access the BIOS. Nothing. It was like that for several days.

  Tried all the common solutions - removed battery, disconnect the power supply and press the power button - still nothing. Tried w/o - just AC, just the battery. Even stripped down to the motherboard to see if I could remove the CMOS battery and reset the CMOS but it is soldered on the motherboard. Put all back together, still nothing.

  Finally, I had to recharge my cell phone using a USB adapter and given that the computer had power I tried the usb port and it worked (for example, I could charge the phone - still no screen on the computer). The computer's battery is dead and I plugged it in. That evening, after the battery was full, I tried the computer and it has perfectly worked. Started correctly, shut it down, restarted and it was fine. Unplugged this night there and reconnected again in the morning and... nothing. Just a black screen. No BIOS.

  Killed the battery again then reloaded and now my computer is working again.

  Any ideas on what could cause this problem?

  Thanks in advance.

  Hey Buddy,

  In my opinion her only the only one you can is update the BIOS like Akuma suggested. This problem is not related software so that s the only option you have I think. You can download the latest version of the BIOS here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  If this is not the case, contact an authorized service provider please. Guys can fix all this hardware related problems can diagnose this problem. Maybe the motherboard or something else must be exchanged.

  Good luck! :)

• MSN account has been blocked, and all valid for get info to reset attempts are not received to my alternate e-mail address

  Hello - I use abrand new account just to register for this problem. My account * address email is removed from the privacy * was blocked - I filled out a form of reset for my alternate e-mail address, but nothing up there. I then retried and and filled out a background form thanks to the regulator blocked to prove my payment options and email of recent information to prove who I am. Still not reset info received to the alternative e-mail address. Today, I tried again and there is no control of the blocked page but my password does not work and I do not have information received to the alternative e-mail address. I understand that you can have some resets sent to mobiles but I can't this configuration. Finally, I asked a password reset today and no still no reception to alt address. Help! You will need to get mail NOW. I pay for this service, but there is no support and I didn't ask for this remove - what number should I call to get this sorted out instantly or, Alternatively, to close the account that I do not pay for a service that does not work... Report as abuse

  This is not an appropriate forum to do so, however...  You want to see what I'm about to post to make sure that you have not missed something...

  You talk directly to Microsoft here.  It is - for the most part - a peer-to-peer forum (those, like you, are simply users of Microsoft products).

  You could go through this article - make sure you have done everything...
  http://www.itechwhiz.com/2011/04/account-recovery-reset-Windows-Live.html

  And someone is probably going to put these links here also:
  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/
  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information
  http://support.Microsoft.com/kb/316659/en-us

  Compromised account - access unauthorized account - how to recover your account
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  Hotmail hacked? Take these steps
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx

• Cannot get the notification if the client has been disconnected and then become online

  Hello

  I use notification service Pap BB and I have send a notification to the customer of BB and he got the notification correctly while it is online.

  But if I send a notification, while the mobile was disconnected , then again online , no notification received.

  Please notify

  Hello

  Just for future reference, try to avoid putting your device PIN, appid, password, and the full URL of PPG in your post on the forum.

  From your sample code, it seems like you were missing the initial "cp" right after https:// and before your content provider ID.

  The publicPPGAddress must be of the following form:

  https://CP {cpid}.pushapi.eval.blackberry.com/mss/PD_pushRequest where {CPID} is replaced with your content provider ID

  Let me know if this helps.

  Thank you

  Matt