Tecra M9 - compatibility of memory resources

Similar Questions

• "The memory resources available in the pool of resources of the parent are insufficient for the operations." ... Really?

  Hello

  We have three virtual machines on a host computer. They need to be pinned to this host and with reserved memory: 1 GB, 4 GB, 8 GB.

  We are talking about 13 GB of RAM on a physical server that has 16 GB of physical RAM.

  When I Power On last VM, I get the following error:

  "The memory resources available in the pool of resources of the parent are not enough for the operation."

  I have a second host with the same size of memory and use reach 14GB of memory.

  I know that each virtual machine wants more memory than what we have configured, but I would like to know if it's a "bug" or

  something we can fix via vCenter configuration, or we really need more physical memory.

  Please find attached the config of memory for the virtual machine and the host State.

  Thanks in advance for your help.

  Host needs some memory as well for things like vmkernel, drivers and other components and you will not be able to touch this area with reserves of VM. It is not a bug, more like a fuse. You will not be allowed to book all of the physical RAM to VMs and / or resource pools.

  In your case, you should either decrease the reserves (why are you booking 100% memory for your virtual machines? What you're trying to achieve with this setting? Is it an obligation of the seller to App?) or increase the amount of physical RAM on the host.

  Of course this depends on your specific requirements and management policies of the resources, but in most cases I've seen, reservations are only affected when there is a heavy statement memory and using actions alone is not enough. Even so, reservations are usually configured only for very high priority / criticality VMs and not 100%, but rather a little before "stable / persistent peak memory Active" value. F.x. If a particular virtual machine has more mem use regularly on Wednesday 1-3 PM and memory active value for this period is 3 GB, a reservation is usually set to something like 4GB.

  I hope this helps.

• The memory resources available in the pool of resources of the parent are not enough for this operation

  Hello

  I tried to light a Nexus 1000V VM running on a 5.1 ESXi on a 5.5 vSphere vCenter and I get an error message about the available memory resources. I'm running on a virtual server with 10 GB of RAM and 60 GB HARD drive. The physical host machine has 16 GB of RAM and 320 HARD drive. I am a beginner in this so please try to be clear. Thank you very much.

  Hello

  It is possible to have a reserve of memory on the 1000v (I think that the model comes with them as standard when you deploy).

  If you right-click the virtual machine and 'Settings' and then go to the tab "resources", under the heading 'Memory', you have whatever it is the value of the booking?

  It would look like this: http://i.imgur.com/ftBZENv.png

  If she has a reservation, you could safley assign 0MB (removes the reservation). This could be preventing it from power.

  Otherwise, you run a cluster in vCenter? You have active HA?

• Please suggest tool use ability to control host and VMs CPU, memory resources.

  Please suggest tool use ability to control host and VMs CPU, memory resources. What are the parameters to be monitored, their level of thresholds.

  What is the TOP / ESXTOP.

  Hi friend

  Here's the blog post detailed ESXTOP:

  http://www.yellow-bricks.com/ESXTOP/

  There is a VCOPS product that can also help you to understand so many parameters. You can try the license of the Foundation which is free of cost. There is a lot of intelligence if you go for paid VCOPS.

  VCenter graphs/stats can also help you as well.

• memory resource limits

  I am struggling with the justification for the existence of limits of memory resources.

  Why a virtual machine would (for example) 2GB memory configured in "virtual machine properties | material"and have a limit of 1 GB under" properties of the virtual machine. resources? "Why not just configure it with 1 GB of memory?

  Also, if a virtual computer is configured with a memory of 2 GB, but has a limit of 1 GB, would he think always that she had at least 1 GB free memory and never page?

  Can someone give me a realistic scenario for the use of resource memory limits?

  Thank you

  -dog

  Honestly, I don't think you'll find a good.

• Memory resources

  I have a host that has 2 GB of physical memory.  On the Summary tab, it confirms it.  On the tab "allocation of resources", it shows a total capacity of 181MB of memory.  I have 2 guests, a Vista of 512 MB and 256 MB XP host.  I don't have any installation of reserves.  I can start a VM, but the other will give an error of 'not enough memory resources'.  Any ideas what would cause this?  It is configured in a cluster with 2 other guests.  Any ideas what is the cause?  It worked ok before in a non-clustered scenario.

  2 GB is the minimum size of mem to install ESX/ESXi 4.0.

  Add memory if you plan to use to run virtual machines.

  André

• Memory resource problem

  I'm new to ESXi. I downloaded and install on a PC for the test. I then vmware converter allows you to convert an existing virtual machine to the ESXi directly image, but impossible to start. Every time he tells me to check admission is failure of memory resource.

  But in the 'Summary' of VMWare Infrastructure Client, total memory page is 1013,51 while the current system used 346,00 MB MB.

  In the "Configuration" page, it says: total: 1013,5 MB, System:-, virtual machines: 802.0 MB.

  In the 'Resources' page, it says memory reservation: 94MB, memory used in reservation: 0 MB, full memory: 94MB.

  Why is the difference? According to the summary page, I should have more than 600 MB of free space? The system is just built and only VM existed, but never started.

  Welcome to the VMware community forums.  Take a look through this thread - http://communities.vmware.com/message/1029161#1029161

• Compatibility of memory for Tecra A8

  I just got a new Tecra A8 as a replacement for a broken Qosmio. Can someone tell me if I have the chip memory SoDimm 1 GB that I took on my old qosmio G10 is compatible with my new machine? Looks like it should be, but does not seem to want to place - click the 'groove' is about 1 mm in the wrong direction.

  The part number is PA3313U-2M1G, who seems to have been replaced after less than a year! I'll be more annoyed if I buy * an * upgrade.

  According to specification older Qosmio use module 333 MHz (PC2700) and Tecra A8 has (PA3411U-2M1G) DDR2 667 MHz 1 GB memory module. I googled a bit and Tecra A8 is not listed as compatible portable model for this RAM.

• Tecra S1, cannot stop / memory dump blue screen physical

  Hi all

  I really have a serous problem with my laptop TOSHIBA Tecra S1 series.

  I can NOT stop, she gives discharge and it restarts (bule screen) memory physics.
  Whenever I restart, it gives discharge and it restarts (bule screen) memory physics.

  In both cases when windows start it give the message that:

  Your system has been recovering from a mistake of the serosaand it give more details

  If you need a snapshot, please send me email.

  The system that I use:
  Windows XP - SP2 Professional

  This problem came once I installed the software my company's VPN .
  I tried this software in the laptop TOSHIBA TWO and he gets this problem, I also tried to install the software on other systems and the two systems are very good and they work properly.

  Can someone help me, this problem is really annoying me. If you need the VPN software my company gave me please send an email and I'll send it to you.

  My email: [email protected]
  [email protected]
  [email protected]

  I really appreciate your quick answer to the problem.

  Thank you
  AR

  [Edited by: admin]

  Hello

  Is what VPN Client this?

  It seems that the OEM operating system do not like the VPN Client. The problem could be that Toshiba has designed its restoration in a small way differently OEM CD or some utilities occure the problem because each 'designated' its own Windows OEM manufacturer.

  There are built-in drivers, tools and software. But normally the Toshiba and the other manufacturers don't change something in the operating system. So I think that there is a software problem.

  In my opinion, I want to uninstall programs in different turn that may occure the problem.

  Chris

• Tecra A9 - compatibility/AHCI in the BIOS mode

  The Toshiba Tecra A9 seems to have a serious lack of implementation of the BIOS: it has an Intel ICH8 - M - SATA controller capable of running in Intels so-called "handset Mode" that allows it to act as a controller SATA AHCI, a normal IDE controller or mix the two for various channels.
  The BIOS allows to adjust it to the "compatibility" - mode that seems to work correctly by running in the IDE for all channels mode, but the mode "AHCI" seems to be set up wrongly. AHCI is a standard for SATA devices that is widely used and the Tecra A9 defines only the hard disk to use SATA AHCI - optical drive CD/DVD-ROM rest in IDE mode which leads to conflicts of pilots as only one driver can access the controller in DMA mode - when the value of both SATA and IDE modes, two drivers are needed for one physical chip.
  'AHCI' in the BIOS must activate the peripheral subject connected to the controller is running in SATA AHCI mode, but as I already said, it is not. Only the hard drive will be displayed as SATA device.

  For me, this looks like a defect in the BIOS that needs to be repaired.

  Best regards
  Peter

  Hello

  I think that it s perhaps a default, but you done already encountered problems with the execution of the "compatibility mode" where the CD/DVD drive (IDE ;)) works in "IDE mode"?

  Do you have a few mistakes or something similar? If so, then it s probably REALLY a bug, but if not, maybe this 'combined mode' (I know what you´re talking about my old 875P Chipset and my ICH5 have the same thing) works correctly.
  In my machine (desktop computer with a DFI Lanparty 875P and northwood at 3 Ghz) runs in the "handset mode" so that everything works to make it compatible in "IDE" mode But I Don t a loss of performance.
  It s not as fast when I drive in pure SATA mode, but then my DVD won't work.

  So, if you have problems with the machine then I agree, otherwise "it s not a bug, it s a feature" ;)

  Welcome them

• Tecra A8: can what memory I use?

  Hi all
  I bought a Tecra A8 with 1 GB of memory and I want to upgrade to 4 GB, but I do not know what type of memory to ask.
  My machine is labeled MODEL No.. PTA83E-08T04E... but when I go to providers, web sites, I have to choose between the models A8-103, A8-104...
  On the Toshiba site I don't see the appropriate response
  Can anyone help?

  Christian (France)

  Hello

  You have a Tecra A8 PTA83E with processor Intel Core 2 Duo T7200 (2.0 GHz) processor and Intel 945GMS + Intel 82801GBM chipset?
  Then maybe this page could clarify a few issues:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=24210&ft=m&St=3

  You must use DDR2 memory modules 667 MHz (PC2-5300).

  You can also use this module:

  -2 GB DDR2 - 667 PA3513U-1M2G
  -1 GB DDR2-667 PA3512U-1M1G
  -512 MB DDR2 - 667 PA3511U - 1 M 51
  -256 MB DDR-2-667 PA3499-U - 1 M 25

  Best regards

• Tecra A9 - controller card memory under Windows XP?

  Hello, I have a new Tecra A9 - 51G. I've had to downgrade Vista to XP Professional and evrything works fine, but Windows cannot find memory card contorler, and I can't use 5-in-1 Bridge Media slot (compatible SD Card, Memory Stick, Memory Stick Pro, MultiMedia Card, xD-Picture Card). Please help me. I need this driver. Thank you.

  Hello

  Have you installed all the stuff including utilities SD Toshiba download page?

• Tecra S5 - 13N - wrong memory speed

  Hello

  I'm new here so this is my Question. I upgraded my Tecra S5 - 13N memory today. Installed 2 DDR2 667 MHz 2 GB So Dimm, but I'm not sure that it detects the correct Mhz.

  Here's what I get from CPU - Z

  1
  SMBus address 0 x 50
  Memory type DDR2
  Format of SO-DIMM
  Manufacturer (ID) Kingston (7F98000000000000)
  Size 2048 MB
  Bandwidth Max PC2-5300 (333 MHz)

  It is said the following in the specifications of the laptop
  standard: 2 048 (1 024 + 1 024) MB
  maximum extension: 4 096 MB
  * technology: DDR2 (667 MHz) RAM *.<>

  I did an upgrade of BIOS, but still the same. Is that all that I missed during the upgrade?

  Thank you.
  Costas

  Hello

  What modules you have installed exactly or let's say what is the exact number of them?

  Generally these tools like CPU - Z or something are not so important. If everything works well, forget it. ;)

• Tecra M9: not enough memory to run

  Hello

  I have a problem with an application that freezes with messagebox not "enough memory for the operation".
  I repeat, the problem on 7 different model laptop Tecra M9 with configuration: 1024 + 1024 MB RAM with Nvidia NVS130M.

  I tried to change the virtual with ratio 1.5 * ram, 2 * ram memory... and even without virtual memory... every time the same result, when the memory used by file (visible in the Manager of tasks bargraph) occupies about 1.30 GB, the message box appears an application stopped.
  I did a disk defragmentation, checked the Ram, tried the 3 G option in boot.ini, no way.

  Finally, 'just to be sure', I took 1 Bank of Ram of the laptop, and then, with only 1024 MB of Ram, the problem goes away, the Task Manager indicates a value stabilized to used memory (a bit more then 1 GB).

  I don't think it is the right solution for 'downgrade' the size of Ram, if someone already has this kind of problem?

  Thank you in advance

  Hello

  > Finally, 'just to be sure', I took 1 Bank of Ram of the laptop, and then, with only 1024 MB of Ram, the problem goes away, the Task Manager indicates a value stabilized to used memory (a bit more then 1 GB).

  Hmmm, check if you can run Notepad with another RAM module removed.
  I'm not quite sure but it is possible to m the error could be related to a dysfunction of the RAM.

• Issue of compatibility of memory for a Satellite 2450-201 s

  I bought 512meg of Crucial PC2700 for my laptop. It came with 256meg PC2100. It is better to have just the superior assigned memory in it, or should I keep the bars of memory in it?

  Thank you!

  Hello

  It s better not to mix memory modules. In particular, if you have two different manufacturers and two different schedules. Not good.
  It is better to have two memory similar modules, due to compatibility issues.

  Welcome them