Cannot get to install KB974417.

Similar Questions

• Re: Portege M800 - cannot get bluetooth installed in Windows 7

  Hi, I have a portege M800 PPM81C-07602D. It came with windows vista but I reinstalled Windows 7, and now I can't get the bluetooth drivers to install. I tried the old drivers and the new drivers windows vista 7, but when I run the installation I get the message "Please plug in the bluetooth device and click OK."... If I click ok it appears again. I don't know why it wouldn't find the bluetooth internal... I don't think that there is a physical switch to BT anywhere, and I tried to find out if it had been disabled in the bios but nothing in there on this subject... so... I'm out of ideas.

  Anyone has any ideas I can try?
  Any help is appreciated, thanks!

  Toshiba Bluetooth stack can be installed if the BT module is activated correctly use FN + F8 key combination to activate the BT module.
  After making that BT should be recognized and installed correctly (you will have to entered BT in Device Manager).

• cannot get new installed cart, 932xl on my 6600

  NEED HELP ON THIS NEW PRINTER, LESS THAN 6 MOS OLD, 1 REPLACEMENT OF THE CARTRIDGE

  Here is a link that shows how to replace the cartridges for your printer model. With instructions, that it also has a video this one too can be useful.

• I installed Internet Explorer 8 and cannot get an internet connection...

  I installed Internet Explorer 8 and cannot get an internet connection using this program.  However, I get a connection very well when I surfed with Firefox.  I tried to disable the firewall and still no connectivity.  I am connected through a Netgear router with a hard line.  The signal is strong.  When I run a diagnostic on Internet Explorer, I get a message from the bed... WINDOWS CANNOT CONNECT TO THE INTERNET USING HTTP, HTTPS, OR FTP.  THIS IS PROBABLY CAUSED BY THE SETTINGS OF FIREWALL ON THIS COMPUTER.
  CHECK THE SETTINGS OF FIREWALL FOR THE HTTP PORT (80), HTTPS PORT (443) AND FTP PORT (21).
  YOU MAY NEED TO CONTACT YOUR INTERNET SERVICE PROVIDER OR THE MANUFACTURER OF YOUR FIREWALL SOFTWARE.
  No idea how to solve the connection on Internet Explorer?

  run malwarebytes.

  Also, try the following

  1. internet options and click the Connections tab
  2. and then click LAN settings and uncheck everything.
  3. and then click on apply & ok.
  MCP. MCDST. LVL 80

• I don't know what error code I get when trying to install KB974417, KB963707 and KB939683. I found a solution for KB974417 which is to install the latest Windows Installer. What about the others? KB963707 and 939683.

  I installed Windows Installer 4.5, because the support microsoft inform me that I have the latest Windows Installer Package to install KB974417. But I can't find solutions for KB963707 and KB939683.

  To get the Windows error meets during updates, you can try to read the Windowsupdate.log file using the http://support.microsoft.com/?kbid=902093 article

  Also try the few measures available under article http://support.microsoft.com/kb/971058, the http://support.microsoft.com/kb/822798 and the http://support.microsoft.com/kb/906602 if they relate to your error.

• Cannot get online after installing windows XP Edition family on my laptop which was origally XP PRO

  I have a laptop HP Compaq 6830 s that had xp professional did not get a disc of bone with it when buying. The system crashed 0x0000007B error code. I installed OS XP Home version Pro Version and now I't does not recognize my modem or ethernet. Cannot get online. I'll tho the HP site and they don't have that driver for XP Pro Downloads Home Version. I go to the Device Manager and have question marks on the following - ethernet controller (PCI bus 134, device 0, function 0), network controller (bus PCI 3, device 0, function 0), PCI Device (device function 27 of the PCI bus 0 0), Universal serial bus (PCI bus 0, device 29, function 7) (USB) Universal Serial Bus controller (bus PCI 0) (, 26, function 7 device), unknown device (on PCI bus) properties, the properties of the unknown device (on system compatible ACPI Microsoft) and the properties of video controller (VGA Compatible) (bus PCI 1, device 0, function 0) all the points mark have (Code 28). Is there any wat I can fix this or should I install OS XP PRO?

  Go here--> http://www8.hp.com/us/en/support-drivers.html

  Enter the model of your computer.  If you just enter 'Compaq 6830 s' you get 3 choices.

  For example, I clicked on the link below and select the link for "XP Professional" coming to this page--> http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3688717&prodTypeId=321957&prodSeriesId=3688712&swLang=13&taskId=135&swEnvOID=1093

  You're right; There are a large number of items on this page.  You may be able to refine things if you enter your full product number, but if not, here are some general indications:

  "" For each of the downloads, click each tab on the download page and read the information on 'Description' improvements,' 'Instructions of Installation","System requirements"," Release Notes, "and"Revision history" before you install the downloaded driver.

  • Start by "Driver - Chipset" and use "9.1.0.1007 a (January 16, 2009).»
  • Then go to "driver - storage.»  Install the Intel Matrix Storage Manager driver.  Optional, but probably very desirable, install the new version of HP 3D DriveGuard.  You probably don't need (at least for now), the driver of chip card reader (unless you have an external drive of smart card).
  • Then go to "- Audio driver." Install the driver Microsoft UAA and the most recent drivers SoundMax ADI.
  • Then go to 'Pilot - graphics.' Install the new ATI video driver.
  • Then go to "driver - network."  It's a little more complicated.  Install the Marvel Yukon Gigabit Ethernet controller driver.  This will allow you to connect to your cable or DSL or your router by Ethernet cable.  You must determine if your particular laptop has an Intel or Broadcom wireless adapter.  Looking in the Device Manager in the "Network adapter" section, you should be able to make this identification.  Install the driver for the appropriate device.  If you believe that your laptop is Bluetooth compatible, install this driver as well.  The HP "wireless Wizard" is optional.  I would delay installing this at this stage.
  • Then go to "Driver - keyboard, mouse and input devices."  Install the Synaptics Touchpad driver and one for the HP Quick Launch buttons.

  At this point, most of your hardware should work correctly.  If there is always warning icons in Device Manager, you should be able to understand... or ask again here.  Read the 'Description' for other downloads to see if this is something you want or need.  Be aware, however, that many "Software" downloads are only updates or patches and not the complete package (which probably would have been preinstalled on a new computer.

• Hi cannot get silverlight to install on my computer using windows vista 32 bit laptop

  I tried to install silverlight for netflix cannot operate on top of the help system

  Hello

  1. what happens when you try to install Silverlight?

  2. in the place where you install Silverlight?

  You can install Silverlight from the link.

  Download Microsoft Silverlight

  http://www.Microsoft.com/getSilverlight/get-started/install/default.aspx

  If the problem exists, you can ask your question in the Silverlight forums.

  Installation and configuration

  http://forums.Silverlight.NET/13.aspx

  See also:

  Silverlight: Cannot install Silverlight or Silverlight gets installed but cannot play videos; Error: 1503

  http://support.Microsoft.com/kb/979005

• CS6 downloaded, but cannot find a way to get to install?

  CS6 downloaded, but cannot find a way to get to install? I followed the instructions but am lost.

  After downloading file 1 of 2 (7z) and 2 of 2 file (exe), put them both in the same directory and double-click on the exe file.

  do not manually extract anything.

  If you are confused, remove everything that is confusing and restart downloads.  help explicit with the files you have already downloaded, or which file (s) (names and extensions) you downloaded?

• Cannot get pse10 to take my styles, have had some PES 10 for 2011 pse13 bought and installed, uninstalled pse10 inorder to get pse13 to install easer, I reinstalled pse10 but now the stules I do not appear in the effect section. I checked the two section

  Cannot get pse10 to take my styles, have had some PES 10 for 2011 pse13 bought and installed, uninstalled pse10 inorder to get pse13 to install easer, I reinstalled pse10 but now the stules I do not appear in the effect section. I checked the two sections where the styles light up on windows 7

  I suggest that you need to reset your preferences file by using this method:

  Start PSE10 until the Welcome screen.  The home screen looks like this:

  

  When you are in the Welcome screen, press first Ctrl + Alt + Shift + AND click 'change' to get a different dialog like this:

  

  You must click Yes and you're done.  This particular area is sometimes hidden, so you will need to drag the homescreen on the side with your mouse a #to make it visible.

  I hope this helps.

• Installed the Trial Version of Acrobat Pro XI, now pop-up box keeps appearing & cannot get rid of it.

  Installed Trial Version of Acrobat Pro XI, now the day 30 trial is over maintaining the pop-up box that appears and cannot get rid of it.  I don't want to license or install the product - just stop the box pop up!  Certainly a way to put people out of future trials of download.

  Can a simple question, anyone help?

  You have uninstalled the trial?

  Adobe Reader and Acrobat cleaning tool
  -------------------------------------

  The cleaner deletes a stand-alone Reader or Acrobat, including preferences and settings that can be kept for a standard program uninstall

  http://labs.Adobe.com/downloads/acrobatcleaner.html

• After the installation of 41.0.1 gmail site has security problem, also cannot get roboform toolbar to display after activation of Roboform in FF

  FF broke so I upgraded to 41.0.1. After that whenever I tried to go to gmail.com , I get a message of no reliable view security. Tried to ignore the message, but received another similar message and was hardly the easy just configure an exception for each of them.

  Also activated roboform version newly installed but cannot get the roboform toolbar to display.

  I'm 10 Windows and the version of ff is 41.0.1

  Hi Andy, which display the certificate refer to the "issuer", certificate Firefox does not trust. He mentioned Microsoft parental control? Unfortunately, everything I know about this certificate was already in my previous answer.

• Cannot update or install iMovie and iTunes u after reset my iPhone 6 s

  Cannot update or install iMovie and iTunes u after reset my iPhone 6 s

  Do you receive an error message?

  Are signed with the same Apple that was used to get these apps at the start ID?

  Do a forced reboot - after all open applications using the app Chooser - invoked by fast double pressing the home button and drag upwards on each app until it disappears from the screen.

  Meet the sleep/wake and home buttons down until you see the logo  - then release and allow normal start upward

• Cannot get into the BIOS on my Portege R700

  Hello friends,

  I have laptop Portege R700-1321.
  1 year a go, I was updating my version of BIOS to 2.20 and after that I have cannot get into the BIOS!
  try a passer-by but noway :(

  When you press F2 after you restart the computer nothing add and put it back again.
  try to change ro F10 boot order but still just restart :(
  I need to change the boot order to install the new OS fresh and of course my BIOS setting.

  Please help me.
  If any body had a same problem or know how to fix it :(

  First of all you n t need to change the boot order in the BIOS if you want to reinstall the new system.
  You can press F12 all turn on/off the unit.
  Then a menu should appear where you can change the boot device.

• Try to get an install Image, but she says that my product key is not valid

  Hi all!

  Recently I just tried to install Windows on a Mac and when I try to get an install Image it says: "invalid product key".

  I do not understand why this happens upwards I'm getting the key to product directly out of the back of a laptop computer, the only problem is that I don't know what OS it is.

  Any help on this is appreciated!

  Also, I am turning the question on my Mac is because the laptop does not work, I have another that I could try to use!

  Thank you!

  ~ indy

  You can't use a mac on windows key and you cannot use a key off a lapot broken to activate windows on a mac.  You need a valid windows key for your operating system.  What OS are you trying to install?  How are you trying to install?

• trying to put in place the 2nd user account and cannot get a password

  you have a user account, but cannot get a password

  Hi MaryFotta,

  It seems that you cannot create a password for the second user account.

  I will definitely help you with this.

  1. what version of Windows is installed on the computer?

  2 user are. What account you referring?

  For more information, visit the following links and check.

  Create a user account

  http://Windows.Microsoft.com/en-in/Windows7/create-a-user-account

  User accounts: frequently asked questions

  http://Windows.Microsoft.com/is-is/Windows7/user-accounts-frequently-asked-questions

  It will be useful. If you have any other questions, feel free to let us know. We will be happy to help you.

  Thank you.