Cannot get Windows 7 or 10 on NEW Inspiron 3650

Similar Questions

• Cannot get windows 7 sp1 to charge through the installation... then says 'Setup sp fail' changes back

  Cannot get windows 7 sp1 to load either with download or install disk... takes a lot of time then configures up to 99% then says 'default configuration restoration of service pack changes' which can do so he can install

  Hello

  Please, try the steps outlined in the article below and check.

  Problems to install a service pack for Windows 7
  http://Windows.Microsoft.com/troubleshootwindows7sp1

  I hope this helps.

• How can I get windows xp to recognize a new disk of 1 TB sata hard?

  How can I get windows xp to recognize a new disk of 1 TB sata hard?

  Hello NavarroIT,

  In addition to the previous comments, I have link for HD is not recognized.  It is an external drive.  However, without knowing the manufacturer of your hard drive, you will need to check on this end.  You may need to format the disk first.  I hope this helps.

  Microsoft Answers: External hard drive

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-hardware/external-hard-drive-is-not-recognized-in-my/8464edf9-d8b4-4afb-bd91-13d639c23c9c

• I'm doing a windows update and I get Windows could not search for new updates... errors found... Code 80244019

  I'm doing a windows update and I get Windows could not search for new updates... errors found... Code 80244019... Can someone help me please

  How to troubleshoot problems connecting to Windows Update or Microsoft Update https://support.microsoft.com/en-us/kb/818018

• Cannot get windows 10 app upgrade to run

  Hello

  I have a portable extensible original and active running windows 7 Home premium and I cannot get windows 10 app to run.

  I followed KB https://support.microsoft.com/en-us/kb/3081048, got the identity of the package on the two dism/Online/Get-Packages | Findstr 3035583 2952664 and still nothing. After this I run the troubleshooter of GW10appdiagnostic and it comes always freezes in "eligibility verification."

  In addition, potential interest that I got a windows error update on the module "upgrade to Windows 10".

  

  I want to get help and upgrade as soon as POSSIBLE.

  Thank you.

  Hello Madzzz

  I suggest to you that do a manual upgrade using the Windows 10 installation media. That way skip you the step of waiting for the book to come through instantly upgrade to Windows 10. A guide step by step can be found here.

  Hope this suggestion helps you Madzzz

  Yuri

• Cannot get windows media center in windows 7 ultimate 64-bit update as well as digital cable Advisor is displayed. ____

  Cannot get windows media center in windows 7 ultimate 64-bit update as well as digital cable Advisor is displayed. All I have is the not the Gallery library. I tried via tasks > General > auto update > download now and via high cmd.exe cd %SYSTEMROOT%\ehome
  start/wait mcupdate-u

  Uninstalling firewall antivirus and the disabled. Also tried with firewall on and gave the program and full access to the client update. Also tried with windows firewall on and off nothing doesn't work.

  And, now that I'm home and connected to...

  As promised, here are the download links for the DCA Installer:
  x 86: http://go.microsoft.com/fwlink/?LinkId=195559
  x 64: http://go.microsoft.com/fwlink/?LinkId=195560

  Re-reading your first post, I see also (this time) your Extras Gallery is completely absent.  You probably want that, Yes?
  This post to thegreenbutton should help it get there.

  Kind regards
  Chris

  MS - MVP (Media Center) [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• a windows 8 NEW ACER AND the computer will be returned. What should I do to get windows 8 transferred to a new pc? thxs for any help

  BOUGHT AND INSTALLED windows 8 NEW ACER a few weeks ago and now have decided to return the ACER.  What should I do to get windows 8 transferred to a new pc?     can I "return" windows 8?

  thxs for any help

  You must first remove Windows 8 on the computer by restoring it to its factory State. This will allow you to transfer the license to another computer and reactivate over the telephone:

  New computers that come pre-installed with Windows often have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is accessible to most popular brands...

  For Acer, press and hold ALT + F10, as soon as you see the logo

  ------------------

  Continue to install 8 Windows on the new computer and reactivate by phone if necessary:

  1. press the Windows key + X , and then click run, and then type: slui.exe 4

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• New inspiron 3650 won't start

  Saturday, I had a new inspiron 3650. I ran through the stuff to start and then I have it turned off and tried to install a new video card. The video card requires more energy than the 3650 has so I tried to replace the power supply. The new power supply was inconsistent with the 3650 so I put back the power SUPPLY original and the GPU. Now when I try to run just the power light blinks yellow. Fans start, but there is no input or output. That is, the monitor has no signal and the keyboard and mouse do not work. I have no idea of what is happening and any help would be appreciated.

  

  

• Caught a virus. Want to just erase the HD and reinstall. Cannot get Windows original XP discs do. Help?

  Click son on some site that I can download a Trojan horse.  Disabled Malwarebytes and AVG update did not find. Saved that I need and now want to erase the hd and reinstall.  Cannot get computer to read what whatsoever. I myself once in safe mode, but now it tells me that it cannot find a hard disk.  I can refer to boot from the CD drive, but it gives me a blue screen error "cannot find a hard disk. Any help?

  Your computer most likely has SATA drive and the Windows XP installation disc does not include the SATA controller drivers so Setup can not 'see' the hard drive.  You have several options:

  1. to detect the drive, you must use the F6 method to provide the drivers of controller for the installation program, note that when you use the F6 method, the pilots MUST be provided on a diskette, the installation program will not accept the drivers from other media sources.

  Adding third-party or updated during the installation of Windows driver
  Mass storage drivers and the Setup process

  2. you can integrate the drivers into your installation CD:

  http://search.Yahoo.com/search;_ylt=A0oG7nPuhZFO4ikAUghXNyoA?p=slipstream+F6+SATA+drivers&FR2=SFP&FR=YFP-t-501&type_param=

  3. you can go into the BIOS and change the SATA controller in IDE mode and the Windows Installer will be able to detect the drive.  Most of the BIOS have this option is available, if you don't you will need to use option 1 or 2 above.

  John

• How can I get windows xp to open a new window each time?

  How can I get windows xp to open in a new window every time

  Hello

  Please continue with the following steps to support...

  Click on 'Tools' > Options preferences > Options > Tabs panel > tabbed browsing

  You should be able to specify a new window when you click on a link.  I hope that this information is beneficial.

  http://support.Mozilla.com/en-us/KB/menu%20Reference#w_48optionssf-49preferencessf

  Thank you

  Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• try reinstalling - cannot get Windows XP drivers working but material out Linux LiveCD work

  After having picked up some malware on microtour DX7300 of my wife, I decided to reformat the disk and reinstall.  For years and do not have a copy of the diskette of HP recovery that was created when we arrived first of all the computer.

  I have a copy of Windows XP Pro, installed in such a way that very well.  Device Manager is reported the driver problems with a large part of the devices as ethernet controller, audio, video etc.  I guess I can install most of the people afterwards, except the network/ethernet because I need, obviously, to connect to the internet.  Would have hoped that these devices are plug n play, but apparently not.

  I used a Ubuntu LiveCD to connect to internet.  So I know the network interface hardware works, and even audio and video resolution were out of the LiveCD.

  Found the drivers on this site:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3251397&...

  Those downloaded across the network.  In reading the DX7300, it is clear to me if the network card is the Broadcomm one or Intel.  Rebooted WinXP, I tried installing the Intel driver, got an error message no Intel device not found.  So I guess that's the Broadcomm one.  This driver, installation actually installed.  However, even after a reboot the network device does not work and presents itself as an error in the Device Manager.

  Thought I'd try to manually install the drivers by pointing "drivers" unpacked in the directory of installation above.  Windows indicated that the correct drivers were not found there.

  I'm at one end.  The material seems to work under linux, but cannot get the win to install the drivers.  Advice or help appreciated.

  Hello:

  This is exactly what I need.

  First install the Chipset driver and reboot:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=3251394&prodNameId=3251397&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=ir-57823-1

  Then, install the graphics driver;

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=3251394&prodNameId=3251397&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=vc-68806-1

  Then, install the MS UAA HD Audio Bus driver:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=3251394&swItem=PSG_I23303-108286&prodNameId=3251397&swEnvOID=1093&swLang=13&taskId=135&mode=3

  Then, install the HECI driver:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=3251394&prodNameId=3251397&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=ir-46941-1

  Now for your pesky NIC... It's a NIC from Intel.

  Let's try this 'one size fits all' network driver Intel: you want the first listed download (XP 32 bit).

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18717&ProdId=1700&lang=eng&OSVersion=Windows%20XP%20%20Professional * & DownloadType = drivers

  Paul

• How to get windows live to check for new messages more often and?

  How can I get windows live to check new messages more often and how do I get it to send mail when I'm done otherwise that hit the button send and rec? I miss OutLook Express!

  OH, and why can't get us Outlook Express on a Windows 7 PC? It's a great program! User Friendly etc. I hate Windows LIVE BTW!

  Jimmy, WX9DX

  Re email check frequency, see here...

  http://email.about.com/od/outlookexpressmailsync/Qt/Check_for_New_Mail_Periodically_in_Windows_Live_Mail_or_OE.htm

  There are other e-mail clients...

  http://www.MakeUseOf.com/tag/free-email-clients-Windows-7/

• Cannot get Windows Update to download updates continuous Error 0x80072EFD

  System is running Windows XP Home SP3. I tried all that in the article above and still can not get Windows to date. Microsoft Fix - it that starts automatically when you will allow you to join the article don't fix things not be and it gives me the same error code 0x80072EFD as the update of Windows. I can install updates from the Windows Update Catalog, but I can't just Windows Update to work. During execution of the controls in the article when I typed in Sfc.exe a Black Madonna window appears and disappears. There is Norton on that computer that causing Internet Explorer do not allow access to the internet and the Norton Removal Tool has been used to remove it. Immediately I could access the internet but when even could not get Windows Update to download updates. I tried to disable the Windows Firewall and still no help. I installed AVG and it finds several viruses on the computer, they were removed and still nothing with Windows Update. I even tried turning off AVG and nothing helped. Help! Frustrated.

  Ok...

  And how did you determine that the computer is no longer infected (i.e., by whatever it is)?

  What is now the computer state to Windows Update?

  Care of you answer all the question in my previous answer?

• downloaded windows 8 preview cannot get windows media Center? has been installed on windows 7?

  My grandson downloaded the preview of windows 8! and I can't get Windows media Center? It worked well on windows 7, but all I can get now is windows Media Player. How can I return to my windows 7 and how can I get my windows media Center.

  You can add the Media Center of Windows 8 Preview Release.

  Click on "Where is Windows Media Center" in the following link which has steps to add the Media Center of Windows 8 Preview Release:

  http://Windows.Microsoft.com/en-GB/Windows-8/FAQ

• Cannot get Windows 10

  I can't get Windows 10 even start - I get a screen with a circle going round - not very technology of mind, but thought I would get more than that! Please help - Cheers

  Try to upgrade manually:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).