New inspiron 3650 won't start

Similar Questions

• New Satellite P300 won't start.

  I hope you can give me some advice. This week, I bought a new Toshiba P300 GU with Vista Home Premium. It worked fine for about 3 days, but now it won't start at all.

  Symptoms:

  * - Some LED lights blink for a second, then they stop again.
  * - No fan or drive noise.
  I tried to remove the battery and power cables and left the computer for a day before trying again. There is no difference except for a few plus-lumieres LED flashes for a second, the first time I try to start the computer. The next time I try, only a few lights flash again.

  After I discovered the startup problem I noticed that food is quite noisy. I also noticed that the machine has a small mark RENS in the plastic in the upper left above the screen. (Looks like a defect of manufacturing error or transport) You hardly notice the 1 cm small inconsistency in the plastic, but it doesn't look like a normal scratch.

  As I thought that food could be the cause of the problems because of the strange sounds, I brought the maschine to a PC technician today. He tested the food and said it was working normally, but he also said that this should not seem like that. He did not open the laptop, to not cause trouble about the Toshiba warranty.

  I bought the computer to the Denmark I wanted a Danish keyboard. However, I live in Portugal, where I use the computer. Where is the PC now.

  Do you recommend that I contact an ASP to the Portugal to fix the PC or do you propose I have return the PC to the merchant at the Denmark?

  The ASP will be able to exchange the screen and power supply that are not in the State, they must be good obviously both?

  Thanks for the tips!

  Hello

  First of all I must say I never had problems after 3 days of my new Toshiba laptop but these things happen and no manufacturing activity is perfect.

  In addition, I agree with you. I would bring the laptop to an ASP because it seems that this motherboard is defective but I do not know Mr. it's only my personal opinion, and therefore the laptop should be checked by a technician for laptop.

  As far as I know that the laptop is covered by 1 year international warranty and so I would contact the ASP in your country. Ask them if they can fix your computer laptop and if not, you must communicate with other ASP where you bought the laptop.
  I think this is the best solution because they can tell you what to do exactly.

  Good luck and I m sure that your laptop will be repaired as soon as possible.

  Welcome them

• New Inspiron 3650 - how to add an SSD

  I recently got my new i7 Inspiron 3650 with a 2 TB HARD drive. I need to add an SSD to the machine and need advice on how to do it.

  First question is: is it possible for one SSD + HDD in this computer? Or is it limited to a single player?

  Open the case, I see that there are 4 units of SATA data cable (2 available) on the card mother, however there is no available additional power cable. The single power cable has two connectors, a session on the HARD drive and the other to the DVD player. How can I add another cable or splitter to route power to the SSD?

  In addition, there are available for a 2.5 drive bays ", but I need an enclosure for mounting the drive. Is there an add-on Dell blue plastic mounting kits available for this? Otherwise, I can get the generic Assembly for this kits.

  I would appreciate if any part numbers/accessories from Dell can be recommended to achieve this.

  Thank you.

  Hi Hkhawaja,

  Yes, you can certainly have an SSD and a HARD drive, and I suppose you want to put the OS on the SSD.

  This thread offers answers to some of your questions. And here is the link to your manual.

  I have a link below for a very nice Windows reinstallation guide, which will help you to download an ISO of 10 Windows you can use to install the OS on the new drive.

• Cannot get Windows 7 or 10 on NEW Inspiron 3650

  New computer, less than 3 weeks old. Reference Dell 3650 Intel i5-6400. I don't know what you need to know? SATA, Bluetooth, wifi, HD 1 TB, Nividia graphics.

  They never sent me the system drivers/operation right out the box records when Windows 10 had a few teething problems minor during the first week of use (and me being semi biased against him anyway since I'm generally a Win7 user) I decided to go back to Win 7. I used the Micrsoft tool for USB flash burning and installed Win7 Home Premium. The installation took, but without my factory drivers drive most of my drivers were not installed including my ethernet network card and wifi so I was DOA. Called Dell, they have been great and sent the discs the next day.

  I had a few problems with the drivers, they sent me does not install/work and I thought okay although they are 10 for my build windows drivers. I should have stopped, worked on getting good win 7 drivers for my network card got hooked to the net and ran windows update or update my drivers manually from the Web site. I don't have. :( Instead I went to work to put Windows 10 on it and that's where the problems started...

  Errors... tons of them...

  Disk locked

  Missing partition

  No bootable device... Changed to a legacy secure boot disabled startup. Not much better and no luck. Ran chkdsk that everything works well, so this seems to be the software problem.

  Then, I found that it had deleted my recovery disk that I didn't see what he listed more... The disc only I see is my 1 TB almost hard drive now, is that correct? I let fall to win allows 10 and thought ok try again 7 since it worked once. From what I can tell there is no operating system on this subject either right now. I decided to do a clean install of windows 7 and I formatted my drive C to NTFS. I changed the boot order so it could start on my USB which is where I got the image... and the windows 7 files started to load. Now I get:

  CD/DVD device driver when installing win7 error. Nothing I try works. I tried many fixes posted on the net for this mistake, passage to usb 2.0 and others and nothing works. I tried to put my INtel drivers on a flash drive, but it does not recognize. I'm stuck. What should do?

  I am novice to intermediate when it comes to all of this.  Years, I scoured the forums looking for answers and I've always been able to solve my problems of software, this is the first time I actually posted a question.  I don't know where to go from here. If only I could get an OS on it I feel like I could get this computer up and running, download the drivers installed etc... Is it possible to install drivers without operating system? Is there a work-around that works for me for this constant cd/dvd driver error during the installation of windows 7?

  Help... Laughing out loud... Had 3 days ago. The computer works fine apart from that, and I didn't have to ship in return. I have at this point, he can't return to the store by their return policy, but it is under warranty from Dell. It's my fault for trying to go down and update without driver disks. What should do?

  You need to F6 and Secure boot OFF, ON Legacy CSM drivers.

  And you can not delete a Windows 10 partition with windows disk 7.

• Inspiron 6000 - won't start Windows - Blue Screen of Death - the hard drive is Toast! Help me!

  I have a Dell Inspiron 6000 2-1/2 years, with XP Media Center.  Last night at the start, he went to the Blue Screen of Death.  I tried to restart about 10 times, each time by selecting a variety such as 'use last known good Configuration, Safe Mode, Etc.' nothing works.  Get to the point where the windows flag is waving in the wind (may be waving goodbye?) and then hangs at Blue Screen of Death.

  To make matters worse, this is the only hard drive, I have not saved for a few months and I can't seem to find my recovery/boot drive... I swear to you that I made a copy when you are prompted 2-1/2 years ago?

  in any case, I started press F12 and got to the dell diagnostic interface.  I ran the tests in the Section of the blue screen, and almost all categories of hard drives contained errors.  I tried Googling some of them and almost all of the shots indicate disk hard death is imminent.

  So, anyone have any ideas how I can:

  1 retrieve the data

  2. get Windows transferred to another hard drive (without having to buy a whole new copy)

  Any help is appreciated deeply... only 3 weeks until final and just lost a huge amount of assignments for my grad. school...

  Thank you

  Aaron

  
  

• Dell Inspiron 1526 won't start. Error - "Bootmgr missing".

  Ctrl-alt-del does not work and I don't have the vista boot cd. If I'm doomed?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  See you soon

  Mick Murphy - Microsoft partner

• Inspiron 3650 SATA power cable

  I want to add a new hard drive to my new Inspiron 3650. I have the sata cable, but looks like I need to buy a power cable. What I should buy and where can I get a? Thank you

  I had the same problem trying to get the secondary sata power cable to the sata 2.5 drives. In the first command, they sent me the primary sata power cable that has only a single sata power connection and a connection from dvd player. P/N = KC81G. The sales rep insisted it was the right cable.

  I called back and discuss it with another sales who has been able to help me. She said yes, there are 2 different reference numbers and the correct is P/N = GP2JM. Once I received it I installed it and it worked perfectly.

  The part costs $4.99 with free shipping.

  Oh, they have no photos to show what they look like.

• Enable multiple monitors Inspiron 3650

  Looking for activate the monitor output on my motherboard on my new Inspiron 3650 but could not find the option. The other monitor vga output works fine. Help, please

  Assuming that you have a video card, restart, and then press F2 to open the BIOS Setup. Look for the Intel Multi Monitor (or a similar name) option and set it to "Enabled". Save the changes and exit the installation program.

  Assuming that you have a video card, a monitor must be connected to the card before you turn on or you will get an error message.

  If you don't have a card and have integrated graphics Intel HD, I don't know if the Multi screen option will be visible in the BIOS Setup, or you can use the monitors connected to both VGA and HDMI ports shipped at the same time...

• Advice needed on the desktop Inspiron 3650

  Hello world

  I need to buy a new desktop computer and I had a look at the new Inspiron 3650.

  It is in my budget and seems to have pretty decent specifications for what I need, I'd go for the model i3 with 8 GB of RAM at £349. I would like to know if this would be good for the upgrade in the near future. I would like to add a graphics card dedicated, a pretty cheap, less than 70 pounds, nothing complicated and maybe upgrade the processor at any given time. Do you think that this office would be appropriate?

  I mainly use for browsing web, web design and development work so I'll use things like dreamweaver, photoshop, etc., maybe some video basic editing as well, I don't use it for games. My budget is only £450, but I might go to 500 books to a boost if you can recommend anything else, so it comes with a monitor.

  Thank you.

  Hi PS4Gamer78,

  You must call the sales department in your country for prices and specifications. We are in the United States and do not have access to your listing of countries or prices.

• Satellite 1800-100 won't start with new memory

  My satellite s1800-100 won't start although my new memory (2nd) module is 128 MB PC100.

  I have Samsung samsung K4S281632C-TC1H module as PC100 (128 MB) memory on SLOT 1 by default.

  Although all of the features and form factors are clean, why not my Satellite S1800-100 starts? I checked the new (slot 2) memory works fine and tested OK.

  So, is there as a possibility to have a problem in the 2 Slot? Or is associated with failure of the BIOS? (there is no more recent BIOS, current is 2.20 for Satellite S1800-100).

  I am disappointed. I bought a new 128 MB PC100, to insert it in the slot 2, my Toshiba didn't boou up!.

  Important note: if I connect the new memory I bought yesterday, works very well in Slot 1.

  Please help and understanding.

  Kind regards...

  Hello

  Well, it very difficult to say why it won't start.
  I think that there are several possibilities:

  (1.) you used a bad module
  (2.) the second Bank of the Board of Directors has a malfunction
  (3.) the laptop does not support max 256 MB of RAM

  I think that point 1 and 3 is not relevant because you have tested the module and it worked on the first location. Additional the laptop should be able to handle 2 x 256 MB memory, so you should be able to use 2 x 128 MB

  I think that the second ram location may have a malfunction.
  Please check the second slot with a module of memory.

  The second possibility is to use exactly the module which is recommended by Toshiba.
  As I remember it s PC100 128 MB (PA3005U) SDRAM

• Pictures on a new iMac won't start - he's trying to fix the photo library after the migration of my old iMac.  The two are running El Capitan

  Photos on my new iMac won't start - get an error message after trying to fix the photo library.  I just migrated all of my old iMac a new aid of Time machine backup.  Both are running OS 10.11 (El Capitan).

  Get an error message after trying to fix the photo library.

  What does this error message say?  Photos crash or exit gracefully?

  Where your iPhoto library that Library stored? In your pictures folder, or on an external drive?

  Try to copy the library of Photos directly without Time Machine. Connect the two Macs using your network and copy the old Mac to the new library, well as signed in on your new Mac.

  Then try to open this copy in Photos.

• I have an Acer 1810tz-4008 and computer won't start battery. New charged battery - what should I do?

  Original title: the battery starting

  I have an Acer 1810tz-4008 and computer won't start battery.  New charged battery - what should I do?

  Hello

  Check with support from Acer.

  Acer - USA - Service and Support - drivers
  http://us.Acer.com/AC/en/us/content/support

  Acer - worldwide
  http://www.Acer.com/worldwide/selection.html

  ===================================

  Other information that might help:

  References to Vista also apply to Windows 7.

  Check with support from the manufacturer of their books online and the drivers and their forums system
  (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
  problems.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  =================================================================

  Other information that might help:

  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
  long to load).

  In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
  systems overload are not a problem.

  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have on line forums.

  New Lithium-Ion type battery usually last longer if you do not unload their less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Battery meter: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questions

  Battery saver
  http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-power

  Solutions to common battery problems
  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problems

  What is the precise the battery meter?
  http://Windows.Microsoft.com/en-us/Windows7/how-accurate-is-the-battery-meter

  ============================================================

  Try this - to make a Restore Point

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
  Update the drivers (which can do nothing) - then do a right click and UNINSTALL each - RESTART
  who will update the driver stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• My new paid and used successfully once Photoshop elements on Windows 7 64 14 yesterday. Won't start today and I don't know why.

  My new paid and used successfully once Photoshop elements on Windows 7 64 14 yesterday. Won't start today and I don't know why.

  Since then, I reinstalled the software, and what ever problem I had disappeared.

• A30 won, t start

  Hello. I'm new on this forum, but I need help. When I turn on my Satellite A30 it won't start. I get the: in touch with toshiba on the screen, then the fan starts but it won't start. I get this message on the screen: PXE - E61: media test failure, check cable of
  PXE - MOF: exit ROM PXE.
  John was soon

  Hi Mustafa,

  In the BIOS settings, you should have an option called "Memory of UMA", which should show that 64 MB. This is the memory allocated to your graphics card and is main part of RAM of the laptop.

  If you choose this item it should display the options available in 16 MB, 32 MB, 64 MB and 128 MB. use the arrow keys to change from 64 MB to 128 MB., then save settings and exit. On re - start your available RAM will be reduced by the additional 64 MB, which will be reserved for your graphics card.

  HTH

• Satellite U400-14 b turns off and now it won't start

  Hello

  just got a new Satellite U400 this week.
  Worked perfectly the first days, and then last night, it just turns off and now it won't start.

  I press the button and the row of lights beside him light up, but nothing happens that I n t even get as much as the Toshiba screen.
  I tried a lot of things. I left it plugged in all night, tried to take the battery and any results now.

  Little led lights on the bottom indicates that it is his stuffy, battery is white not orange when you press they light up only for a fraction of a second.

  The only thing I can compare it is too when a car won t start and you keep turning and turning the key, well in that case, pushing a button, and nothing happens, fans don t whir or anything...

  help please...

  Additional memory (RAM) has been installed? Try to remove a memory Module and try another memory location.

  If bad memory is not the problem, then there is not much else you can do except send it to an ASP for warranty repairs.