Cannot import the image of the panorama - file too big

Similar Questions

• Cannot import the selected file. Refer to the documentation...

  Hi all

  Of the very basic knowledge on Adobe products please bare with me! We have deployed v8 Adobe Captivate our users to test and when they try to take a PPTX file and turn it into an interactive e-learning courses, it fails with the message:

  "Cannot import the selected file. Refer to the documentation to ensure that you have installed the correct version of microsoft office.

  We have the SP2 of Microsoft Office 2010 (x 86) installed Adobe Captivate 8 before us. We tested and this works if the user uses a PPT file (2003 / 2007 Compatible file) which is a workaround but isn't ideal because they then lose the functionality of 2010!

  Anyone can confirm that Captivate 8 supports Office 2010, or this is exactly why we have this problem?

  V9 does support Office 2010 if this is the case, as if a patch is not solve this problem, then we recommend the customer to go to the product V9. One thing is that we use 32-bit with 64-bit Captivate Office but the fact that it works with legacy PPT I doubt it is the origin of the problem.

  Thank you!

  ChrisW

  As far as I saw, 9 Captivate does not handle this better than 8 Captivate.  But you can check it out yourself by downloading and installing the Cp9 trial version and see if that will import your PPTX.

  A few other suggestions for you:

  • Make sure you run Captivate (regardless of version) using the command run as administrator.
  • Also set PowerPoint to be launched using run as administrator.
  • Don't try to import a huge PPT or PPTX.  Do your tests on something small, say 10 or 20 slides.  This will alleviate the question if you really do turn into is a matter of PC resources.
  • Test with PPTs very sober.  Captivate imports can stumble on some objects incorporated into the PPT Slides.  So just having pictures, text, and anything else in your PPT test.

• My after effects CC 2014 and 2015 cannot import the .obj files.  What's up mind dat?

  My after effects CC 2014 and 2015 cannot import the .obj files.  What's up mind dat?

  After Effects has never been able to import these files.

• LR6 cannot import the raw files from Nikon D750

  Just improved LR4 6 (no creativity cloud) and I can't import the raw files from my Nikon D750.  I tried to import saved the file and import directly from the camera and card.  Says it is not supported.  Is there a plugin or a fix for this?

  Hi ah,.

  Nikon D750 files are supported in Lightroom 6: supported by Adobe Camera Raw devices

  Could if it you please let me know the exact error that you get when you import images.

  Kind regards

  Tanuj

• Cropping creates the HUGE file - too big to save

  Hi-

  I am running PS CS3 and have developed a problem with trimming using the crop tool.

  When I crop an image like this:

  4368 x 2912 pixels (size in pixels 72.8 M)

  12.133 8.089 x inches, 360 ft

  size 250 960 KB

  I get a file like this:

  5760 pixels x 4320 (142.4 M dimension in pixels)

  16 x 12 inches, 360 ft

  size 2 145 800 KB

  This file is too big for the PS, then save.

  What is going on? I have not changed anything with the PS, except RAM adjusted according to reviews of Tim Grey.  I found an ad that says to reset preferences, so I tried, but it did nothing.

  Thank you!

  Press the clear button in the Options bar for the crop tool and make sure you enter the correct units in each field!

• Size of the target file too big?

  Hello
  
  We have an interface that takes a Source file-> transformations in the transit area-> and provides a target file output.
  
  The problem is that the target file is too much than it is supposed to be.
  
  We have 'truncate' Option is enabled, so its no duplicates...
  
  We believe that it is the physical and logical target defined lengths for files.
  
  We believe that the logical length is far too much cause substantial 'spaces' between the columns of data, thereby increasing the size of the file.
  
  We originally the logical length for data columns 12 and got the following error message:
  
  Overflow error arithmetic digital conversion to digital data type.
  
  When we increased the logical length between 12 and 20 interface run fine without errors. But now the size of the target file is simply too large 1:5
  
  Suggestions to prevent these additional places in the columns target?
  
  Enjoy your entries!
  
  Thank you

  Hello

  usually, you need to know the length of your data. If you want to be sure you could put source really big file as logical definition, than to use a cast in your box waiting (ex number (12.3)) then your target

• The following error occurred while importing IMG_ #. JPG: The system cannot find the specified file.

  It really starts to annoy me. For some reason, Windows does not allow me to import my photos with Windows more, I was able to import pictures all the time, but all of a sudden it stopped. I tried the import with the program auto-importation of Windows and then I tried to use the import software called Windows Live Gallery. Both gave me the same error message "the following error occurred while importing IMG_ #.» JPG: The system cannot find the specified file. "I tried looking up this error on many sites and have not led to what. I tried to re-formating my memory card but it did not work. Please help me, I can not import all the images and is running out of memory cards, I don't want to delete the images I took because I can not import to my computer.

  Thank you.

  Hello
   
  1. you try to import these images on the camera?
  2. have you checked if the image files are present on the device?
   
  First cross check if the photos are present on the device and if you are importing from the right location. Try to copy the files manually and paste it on the desktop and see if it works.
   
  For more information on troubleshooting camera connection problems, visit this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-camera-connection-problems
   
  Post back with the results, so that we can help you better.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Restore failed image because of the message error "system cannot find the specified file (0 x 80070002). Is my file of the backup OK folder structure?

  I had to reinstall clean Windows 7 64-bit because of the failure of the RAID 1. I have a picture of my original installation system, but I can't restore it; everything I try, I get the message "system cannot find the specified file (0 x 80070002).  I work through a number of possible solutions, without success so far.

  According to the kb/951002 (that is for Vista but I can't find an alternative for Win 7) I made sure that the SYSTEM account has read permission for the backup folders and subfolders.  However, the file structure of the specified in the above article backup folder is different from my image file structure.  Specifically, article specified a structure of 'N.zip' file for the backup files but mine are a mixture of XML documents and VHD - i.e. no "zip" files Also, my GlobalCatalog file does not what kind of file, for example, it wouldn't ".wbcat" required file type specified in the article.

  The differences above could explain the inability to restore the image and if so, any ideas on what to do about it?

  Kind regards

  Ian

  Thanks Mick, will redirect the request.

  Kind regards

  Ian

• Cannot import the Clipboard because the file is not a TIFF file.

  I'm not a frequent user of Photoshop, but for some time I still get the error message "Cannot import the Clipboard because the file is not a TIFF file."

  Extremely annoying actually.   Is there something that can be done?

  Another application place a TIFF file in the Clipboard, or at least advanced he was TIFF.

  When Photoshop or the desired BONE scan TIFF, there (because it cannot really be given TIFF).

  You need to understand what other application puts bad data on the system Clipboard.

• I have the latest downloadable version of the LR5.  It crashed while it was perceived 1:1 uttered during an import. After a restart of the Win764(), it displays a message that LR has to leave because he cannot read the preview files and it will try to fix

  I have the latest downloadable version of the LR5.  It crashed while it was perceived 1:1 uttered during an import. After a restart of the Win764(), it shows a message that LR has to leave because he cannot read the preview files and it will try to fix it the next time's lance.  I get the same message to another and whenever he throws so I can't launch LR at all now.

  I get the preview of a file has been corrupted somehow.  Is it possible to fix this without having to build a new catalog?

  Use Windows Explorer to open the folder containing your catalog. You will see a folder with the extension .lrdata. You must remove this folder, and then restart the Lightroom. Lightroom will generate a new folder of previews.

• How to import an image into a Psd file using the codes?

  I'm trying to import an image into a psd file as a new layer, but I can't find the photoshop object method in visual studio 2010 object browser. Is it possible to make this work with vb.net codes?

  Any suggestion will be graduate!

  You can, like me, simply leave the scriptlistener plugin installed all the time. Really there no performance impact unless the log file are very large. I just keep an eye on the log file, and then delete it when it starts to get too big. Also there that you don't want the two newspapers js and vbs output set just one you don't want to read-only. Photoshop will Ingore it and only writing to that desired.

  If you do not want to uninstall the plug-in a quick way to do this is to rename it by placing a ' ~' at the beginning of the name.

• Error generating content. Cannot open the InDesign file.

  Hey all -

  In the import of an article on a folio, I just got this error:

  "Content generation error.

  Cannot open the InDesign file. Please confirm that the file can be opened in InDesign.

  The file is opened now in InDesign. I can close and reopen without error.

  I tried to save again article in a new file. No help.

  I tried to create a new folio and bring the article there. No help.

  All links are good. It is a simple file with images, a pane scroll and buttons that link to other articles.

  Anyone experience this problem? All solutions?

  Thank you!

  as suggested above, Amy if you download items from a network drive, move your files to local computer HD and download from there. Download the data to a network drive is known to cause unpredictable errors

• The registry cannot load the hive (file): \systemroot\system32\conig\software or its log or replacing. It is damaged, missing, or not accessible in writing.

  My laptop does not start all of a sudden upward - it crosses the safe mode screen, acts as if it is loading windows (display the windows screen) then becomes to empty, followed by a very quick flash of the message on a blue screen: "the registry cannot load the hive (file): \systemroot\system32\config\software or its log or replacing."  It is damaged, missing, or not accessible in writing. "Then, he repeats the cycle.

  I looked towards the top of the error on the Microsoft Knowledge base, and the hotfix request using the recovery disk, I.  I wonder how I can get the interactive help on laptop computer file so that I can run so that it fixes the problem... (http://support.microsoft.com/kb/307545).

  Advice, that someone could give me so that I can at least get started again windows go down all the important data before reinstalling Windows would be much appreciated.

  Thank you

  Chris

  Hey Chris,

  Thank you for visiting the Windows Xp forum

  I was wondering if you run a retail or OEM of Windows version. If you are using an OEM version of windows, you will need to use the recovery options you have from the manufacturer of your computer. If you run a commercial version, feel free to follow the article in the knowledge base you have found.

  http://support.Microsoft.com/kb/307545 how to recover a corrupted registry

  I was also wondering if you have another computer to work? If so and you feel comfortable or know someone who can remove the hard drive from the computer and connect it to another computer. You can view the disk hard kit to join. Once the hard drive is connected, you can go in my computer and copy all the files to another hard disk.

  Georgio
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• C0000218 {registry file failure} the regestry cannot load the hive (file)

  I have XP pro. on a Dell computer. Think that children may have picked up a few difficulties. When trying to boot into safe mode, I get "Stop: c0000218 {Registry file honor} the regestry cannot load the hive (file): \SystemRoot\System32\Config\Software or its log or replacing." It is damaged, missing, or not accessible in writing. »

  There is no disk that came with it, but I have anouther computer with the same windows. I tried to find a way to make a BOOT disk but cannot find a way. Is there a way to solve this problem with the windows disc?

  It's a pretty popular mistake these days and sometimes easy to get running, but you also want to figure out how it happened.  I always suspect Symantec/Norton products with this error, but we'll see.

  If you currently or have already had a whole isntalled Symantec/Norton products, what are the names and versions (if you know).

  Other variants are:

  STOP: c0000218 {Registry file failure}
  The registry cannot load the hive (file): \SystemRoot\System32\Config\SECURITY or its log or replacing. It is damaged, missing, or not accessible in writing.

  STOP: c0000218 {Registry file failure}
  The registry cannot load the hive (file): \SystemRoot\System32\Config\SOFTWARE or its log or replacing. It is damaged, missing, or not accessible in writing.

  STOP: c0000218 {Registry file failure}
  The registry cannot load the hive (file): \SystemRoot\System32\Config\SYSTEM or its log or replacing. It is damaged, missing, or not accessible in writing.

  I would start with a chkdsk/r since the recovery CD of Console you make (see below) and please answer a few questions...

  Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

  Please provide additional information on your system:

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Fill in the blank: my system was working fine until this happened: _.

  If the system works, what do you think might have changed since the last time it did not work properly?

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• Receive error message: the system cannot find the specified file. C:\Windows\System32\ < LANG_NAME > \mstsc.exe.MUI when I try to use remote desktop.

  Remote Desktop error

  I use Vista Home Premium.  I used to be able to use the remote desktop connection application, but all of a sudden, it stopped working.  When I try to run it I get this message:
  _________________
  The system cannot find the specified file.

  C:\Windows\System32\\mstsc.exe.MUI
  _________________

  Does anyone have a solution to this problem?  I do not have this file into C:\Windows\System32\en-US\... but perhaps it was corrupted somehow?

  Please help me.  Thanks in advance.

  Hello

  It seems that there are a few system files that have trouble.  One of them being mstsc.exe, I wish you find spyware or infection by the virus first, before you try the next step.  Please see the sticky thread in the security forum.  MVP offers some good advice how to remove these problems.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/fa30853d-719a-4265-9e7b-9287567d31e3

  If everything is clean, we will try a repair installation to replace the problem files and also to ensure that other system files are good.

  The 'repair' installation (upgrade on-site) will not affect your installed programs or data.  Just make sure that you are already connected to your computer when you start the installation.  Do not boot from the DVD.

  If the installation does not start automatically when you insert the DVD, run setup.exe from your DVD player.

  • When the Setup program starts and the install now screen, click install now.
  • Note When you receive the important Get updates for installation message, click go online.
  • Click upgrade when the which type of installation you want? appears

  Please let us know if this solves the problem for you.

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.