Cannot install esx on hp dc7600 listed tested - works for esx and I

Similar Questions

• I have a subscription, it's almost over, but I need to change plans and cannot select one I need in the menu plan for change, and I can't cancel. Is it possible to cancel it?

  I have a subscription, it's almost over, but I need to change plans and cannot select one I need in the menu plan for change, and I can't cancel. Is it possible to cancel it?

  Hello

  Please contact support by calling/chat for cancellation requests and billing queries:

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  You can also check the help below document:

  https://helpx.Adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

  Please go through the Adobe - General conditions of subscription as well.

• Cannot install esx 4.1 under raid 5 with 2.7 TB hard drive

  Hello

  I've been tring install esx 4.1 to IBM 3650 server with Raid-MR10i server with raid 5. 6 x 600 GB hard drive

  When it come to selec-hdd it shows the hard drive, but cannot select them.

  but this does not happen with esxi 4.1 for esxi 5.0. and also if I tried with 4x600GB hard disk drive is active and I can install esx 4.1

  any ideas. IWAS tring to understand her for the last two days

  Thanks in advance

  My thoughts

  The maximum supported size of the LUN in vSphere 4.x is 2 TB

  It is why ESX 4.1 can't install TB LUN 2.7, but can be downloaded on the 1.8 to

  ESXi installation is different because it uses only a small partition of the large LUN and do not create a data store

  You will see after installation you probably woun't be able to create a VMFS data with the remaining space store, because it is longer than 2 TB on ESXi4

  Please allow points to useful/correct answers.

• Cannot install ESX 4 in workstation 6.0.1

  Hi all

  I'm new to VMWare... I installed the workstation on xp host, and now I am installing esx 4 in my computer. I configured the .vmx file. I chose redhat linux as OS type when VM was created.

  I downloaded the site vmware esx server for free. I created the iso file with nero. I tried with both cd and disk. but it shows the msg

  "PXE - M0F: exit Intel PXE ROM".

  Operating system not found. "

  I use AMD athelon 2.7 g processor and card mother amd with 2 GB of ram.

  Please help on this.

  Thank you

  try with the iso file available on the download site instead of the creation of the iso vmware

  Just look at available at following vedio

  http://www.YouTube.com/watch?v=rdghryRrzlo

  before you start doing your test configuration

  and it is better to increase the memory of your system at least 4 GB because esx 4.0 itself need 2 GB RAM min

  concerning

  Maniac

• Cannot install windows 8.1 - must remove battery Bluetooth for windows

  Hi, I tried to install my windows 8.1 update, but it always returns the message that it cannot do until I have uninstall my "bluetooth stack for windows.

  I followed several guides for this, which is pretty easy to do. However, in order to complete the uninstall, windows must restart, but when it does, my laptop (Toshiba Satellite CB55-29N) automatically re - install the bluetooth stack, making it impossible for windows complete the update 8.1.

  Can someone help me with this please. Is there a way to stop it automatically install the bluetooth? Or maybe somehow I can download and install the 8.1 file manually and work around the store?

  Any help will be appreciated. Thank you

  The only thing I see that you do at this point is to update the installation now, you apply the updates and then try again the 8.1 update.

  Here's what happens when you refresh your PC:

  · Your files and your personalization settings do not change.

  · Your PC will change back to their default values.

  · Applications on Windows Store will be kept.

  · Applications that you have installed discs or sites Web is removed.

  · A list of removed apps will be saved to your desktop.

  These steps will take you through refreshing your PC:

  · Press the Windows key + C on your keyboard to show the charms (if you use a touch screen: touch the right edge of your screen and drag your finger to the left)

  · Click settings

  
  

  · Click change PC settings

  
  

  · Click general in the left column

  · Under refresh your PC without affecting your files, click Start

  
  

  Then follow the instructions that will be provided on-screen to cool your PC.

• Cannot install Windows updates (has no status) on the computer desktop and laptop

  Desktop               (Purchase date: 13/07/2010)

  Model: Pavilion p6402f or 6402f

  Product: BK275AA #ABL

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 1 64-bit

  Product ID: {removed privacy}

  Portable               (Purchase date: 14/07/2011)

  Model: Pavilion g6 Notebook PC

  Product: QD317UA #ABC

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 164-bit

  Product ID: {removed privacy}

  Description of the problem: same problem on the computer desktop and laptop at the same time began: cannot install Windows updates (has no status)

  No hardware changes or software recently made to the system: I followed the usual procedure to install Windows updates.

  Method of connection: wireless

  Technical expertise: intermediate level

  Performed troubleshooting: because the error # 80071 A 90 type indicated by the system, I followed the instructions of Windows Help and Support, for example to run Microsoft Fix it which did not work; a more advanced method has also been used, who recommended to start Windows Update in Mode safe, then open Windows Update and install the updates and then restart normally. At this point, the problem was that any stage of Windows Update was available.

  Hello amib004,

  As much as I know, only Windows Update cannot be run in safe mode. That being said, I saw where install several updates may conflict with each other. Try to disable all updates installation and install the updates failed one at a time.

• Want to dv6-7307tx: cannot install Qualcomm Atheros QCA9000 series bluetooth 4.0 + HS driver and wireless LAN driver

  Hello

  I use Envy HP dv6-7307tx

  I tried to install Qualcomm Atheros QCA9000 series bluetooth 4.0 + HS driver and the Qualcomm Atheros QCA9000 series wireless LAN driver, it prompted me with an error stating that "the device may not be present or could have been ejected/disconnected from the system.

  And my wifi connection is not stable, it disconnects often, which he can't seem to my other laptop.

  What should I do to solve?

  Thank you.

  Hello:

  The list of parts below to your laptop says that it comes with a card without thread/Intel Centrino Wireless-N 2230 bluetooth, so you have the Intel for W8.1 bluetooth driver.

  http://PartSurfer.HP.com/search.aspx?SearchText=D4B30PA

  Here is the link to the last W81. Driver Intel BT for this model of the wireless card.

  You want the second driver listed for 64 bit.

  https://downloadcenter.intel.com/download/23449/Intel-PROSet-Wireless-Software-for-Bluetooth-technology-for-Windows-8-1-

  You can also try the latest driver wireless card and see if that helps any - once again... 2nd driver for 64 bit.

  https://downloadcenter.intel.com/download/25224/Intel-PROSet-Wireless-Software-for-Windows-8-1-

• Cannot install Jdeveloper 12.1.3.0.0 (Installer for windows 64-bit)

  Hi all

  I try to install Jdeveloper new version 12.1.30.0 (for 64-bit windows setup program) on the windows-8 machine

  but it shows an error in copying the process-

  Failed processing and java. IOException

  See installation screens - https://plus.google.com/photos/109300280452941938698/albums/5627284527861126225/6029872653846525058?banner=pwa & pid = 6029872653846525058 & oid = 109300280452941938698

  second screen-

  https://plus.Google.com/photos/109300280452941938698/albums/5627284527861126225/6029872659466801682?banner=PWA & pid = 6029872659466801682 & oid = 109300280452941938698

  Thank you

  Ashish

  Maybe your download does not work and the file is corrupted.

  Use the generic installer jar where you can test after download. Once the test, open the jar using your patronage zip tool works, you know the download has been authorized.

  Timo

• Cannot install dragon naturally speaking 9.5 not compatible for 64 bit processor

  When I use the installation for dragon naturally speaking disk, interruption comes along and says parameters that this version does not work on a processor parameter to be modified for 32-bit processor and 64-bit. How can I make it compatible?

  Hello

  What operating system is installed on the computer?

  9.5 for the Dragon Naturally Speaking version is compatible with Windows 7; You can see the link provided below for more information.

  http://www.microsoft.com/Windows/compatibility/windows-7/en-us/Details.aspx?type=Software&p=Nuance%20Dragon%20NaturallySpeaking%20Professional&v=Nuance%20Communications&uid=9&l=en&pf=0&pi=7&c=Communication%20%26%20Internet&sc=Voice%20Recognition&os=64-bit&vd=all

  You can uninstall the program and reinstall tryto even.

  You can also consult the following link:

  32-bit and 64-bit Windows: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

  Let us know the result!

• Cannot install CC on iMac. Does not accept my admin and the password.

  Impossible to install CC on mac, he continues to ask the admin and the password.

  In my view, that it is a Mac problem, not something specific to the installation of Adobe software:

  Mac OS X: software Installations ask password administrator - Apple Support

• I'm unable to install Shockwave, I Flash which is pretty good for movies and games?

  Hello world. You can I'm new at this computer stuff. Thus, it is not easy for me to ask my question. But I just got this new top lab for Christmas and I want everything to be in working order. I came across some tips for setting up your lab on YOU TUBE tops and have changed my Firefox browser. That's when I learned that my Shockwave for Director is obsolete. What is c? Research I've done on Adobe, it seems that it is $ 299. the program? Why my laptop HP Pavilion would have something on this subject that I can't access? Well, I guess I'll have to uninstall it. I don't know maybe you guys have a better answer. But I'm not paying for another when I have no idea what he's doing? But it seems that the developer is working with the shock wave of games. Well, I want just the Shockwave to play the games. I also tried to install it on the Solution Explorer, but it won't let me. What is the next step?

  Flash Player Help. Installation problems | Windows

  Mylenium

• Cannot install esx 4 on 4 TB sata raid

  I just upgraded to all readers on a server that had esx4 installed from 1 TB and 4 TB. Now I can not install exs4 on it.

  I cannot select volume using the installation program.  Am I missing something?

  Thank you

  Marcelo Rizzo

  You need to divide you RAID at several smaller 2 TB volumes each

  ---

  MCSA, MCTS Hyper-V, VCP 3/4, VMware vExpert

  http://blog.vadmin.ru

• I installed ESX and vCenter.  Now what...

  I graduated from Workstation to vSphere.  My ultimate goal is to get Lab Manager operational.  I've got VMWare ESX 4.1.0 operational.  I installed vCenter.  I can connect and create a Resource Pool by using the vSphere Client.  But it doesn't seem to be a vCenter running.  I took the default values during the installation of vCenter.  Since my start & gt; Programs & gt; VMWare:

  Generate vCenter Server log bundle

  Generate vCenter Server log Bundle - Extended

  vCenter Orchestrator Client

  vCenter Orchestrator Configuration

  vCenter Orchestrator README

  vCenter Server Linked Mode Configuration

  VMware vSphere Client

  VMware Tomcat

  They are all trial editions.  I don't know what to do next.

  Thank you

  the screenshot, it seems you are not connected to vCenter, but rather just connect to your ESX host.  vCenter would have been installed on a Windows operating system. Using the vSphere client to connect to the IP/hostname of the host operating system, assuming that your added your vCenter OS host to an AD domain, you can connect using the credentials of the AD.

  Once, it will be blank, here, you can create a data center and add your host to vCenter inventory.

• Cannot install malwarebytes because an older version is on the computer and the uninstall part disappeared?

  page is asking me to update codec interpreter. Don't have not does this. When you try to install malwarebytes, it won't let me no and said that it is impossible to uninstall an old version uninstallation is missing. How can I install a new malwarebytes in order to try to get rid of this popup interpreter of codec? Need help.

  Hello

  That should do it https://helpdesk.malwarebytes.org/entries/25291497-How-do-I-uninstall-Malwarebytes-Anti-Malware-

• Printer Hp5510 crashed. Software removal - tried reinstalling. Cannot install printer Message "print spooler does not work - what's up."

  Hi all

  Need help

  Hp5510 locked

  I works fine when connected to my laptop - but-not when it is connected to Compaq Presario desktop mu

  Software removal - tried reinstalling. Failed to install.  printer Message "print spooler does not work - what's up."

  ↑ hanks

  Scott

  Consult HP printer experts found in the HP printer Forum.