Cannot install KB2446708 WindowsUpdate_0000066A

Similar Questions

• Cannot install kb2446708 (error 0 x 643)

  original title: how to install kb2446708?

  UPDATE FAILED ERROR CODE 0 KB2446708 X 643 IM RUNNIG XP PRO ON AN INTERFACE VISTA INSTALLED COSTS. UPDATE IS AN UPDATE OF SAFETY FOR .NET FRAMEWORK 4, WHICH IS INSTALLED SINCE THE UPDATE COVERS XP, VISTA AND WINDOWS 7 THAT I CAN NOT FIGURE OUT IT FAILED REPEATEDLY, NO MATTER WHAT KIND OF HELP OR ADVICE WOULD BE APPRECIATED THANKS. THE TRANSITION TO XP PRO WAS A YEAR AGO AND I'VE NEVER HAD A FAILURE TO UPDATE SO FAR. THOUGHT THAT MIGHT HELP.

  SYNCERE98

  I used the dotnetfx_cleanup_tool to remove .NET Framework 4, then reinstalled and the update succeeded.  Happy days.

• error code 643 cannot install KB2446708

  try to install KB2446708 fail each time that the error code 643.   Thank you

  Hi DebbieTurner,

  Follow the steps described in the article below

  You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates

  http://support.Microsoft.com/kb/958052

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

• 66A - cannot install KB2446708 update error code

  It is an update of safety for MICROSOFT.NET Framework 4. I am running Vista HP on my PC with service pack 2 installed. My computer is set to receive automatic updates. This update has tried and failed to install 59 times. I tried to manually install this update, but it still fails to install. How to install?

  Hello

  1. what happens when you try to install the update manually?

  Step 1: Follow the steps in the link given below and check if that helps.

  http://support.Microsoft.com/kb/2507641/

  For more information you can check the link below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Step 2: If the steps above have not help then redemarrer the computer to the boot in order to verify if any third-party application is causing the problem.

  Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135

  Note: Make sure to restart the computer to normal startup followed step 7 in the link.

  Hope it will be useful.

• Cannot install update (KB2446708) error Code: 0 x 643

  Cannot install update (KB2446708) error Code: 0 x 643

  Hi robandersonyuan,

  You have an Antivirus installed on your system?
  If you have Antivirus proceed to turn off and then try to install the 2446708 KB, also check the section below:

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

• Cannot install updates update - error code 0 x 800700

  original title: cannot install updates

  When I triet to update, I can't 13 updates code kb2526954 0 x 80070; kb2464583 0 x 80070641; kb2464623. ; kb2466156; KB2446708; kb2446704; kb2494047; kb9778464 and option declare check if your Windows xp in safe mode.

  Copy and paste it to the box run from the start menu:

  %systemroot%\system32\CMD.exe

  If you want to help in Spanish request here: http://answers.microsoft.com/es-es

  John

• Cannot install iOS 10.0.1 with Apple Configurator 1.7.2

  Hello

  I have 60 iPads in 5 carts (12 per basket) that I need to install some applications on. They are already configured and supervised with Apple Configurator 1.7.2. I've never had problems in the past with AC1, I've always been able to install the updates and applications easily with very few questions, because of that I've never felt the need to update to AC2. However, this time during the update of ios and refreshment, I get the error 'complete with an error - cannot install iOS' 10.0.1 And now 12 of my iPads are stuck in recovery mode.

  I tried before wipe them off and re supervise them, but I always get the cannot install iOS 10.0.1 error, followed by all the iPads stuck in restore mode. I tried to update only 1 or 2 at a time. I tried the update/supervise them with no apps queued for installation. I tried to restore the iPad via iTunes, which works, but when I try to put it back on AC1, I still get the same error mode and recovery.

  I tried searching online for compatibility with the new iOS and AC 1 problems but found nothing.

  I would like to know if there is more information I should provide that might help.

  Thank you for your time.

  Ben

  Hi Ben

  Makes your iPad successfully update to IOS 10, we have approximately 400 ipads, I've updated a single ipad at 10 IOS using our MacBook pro AC1 OSX El Capitan to test, ill try another now and see if its success.

  When you connect an ipad update the Configurator re-download the IOS 10 or use a cached copy?

  How your Configurator is connected to the internet (behind Proxy, Wifi, Ethernet), perhaps the downloaded IPSW file is corrupted and need to be redownloaded removed\.

  Kind regards

  Rick

• Cannot install 9.3.5 iPad after two downloads

  Cannot install 9.3.5 for ipad

  HI I just wanted to know if it was on an ipad or a. Mac if it's an iPad plug support on a computer or go on http/www.apple.com

  Thank you

• Cannot install OS: "this identifier Apple has not yet been used.

  I just got my first Mac yesterday, a mid 2010 Macbook of opportunity. It's in great shape, works great, I was briefly very satisfied with my purchase. Then I tried to reformat/reinstall, as it does whenever purchasing a computer used.

  I followed the instructions here: https://support.apple.com/en-us/HT204904 and when I got to the step three, after the failure of the hard drive, it wouldn't let me install the operating system. He wanted to connect first with my Apple ID, so I did an Apple ID, but now it keeps giving me an error "this identifier Apple has not yet been used in the App store" and then it gives me the opportunity to cancel or "review". Click Cancel simply cancels the installation, just by clicking on review also cancels the installation.

  An ID is not necessary, but there is no way I can see to avoid it say the instructions on this page. It was suggested that maybe I could avoid the connection on the way to recovery, rather than recovery of the Internet, but the Cmd + R and Cmd + Option + R give recovery of the Internet. I don't see any way to get to the regular recovery.

  I had a suggestion to install from the disc, but I have not all discs. If I could download it from somewhere and burn them then that would be nice, but the instructions on this page are pretty clearly that it should not be necessary to use disks. I should be able to do without signing in.

  So... what upward with who? Where should I go from here? Is it possible to do a regular recovery? Or bypass the Apple ID thing?

  < published by host >

  "a mid 2010 Macbook opportunity."

  "Cannot install OS:" this identifier Apple has not yet been used.

  It's the property > change owner of a Mac of opportunity

• I cannot install extensions, they appear with "will be installed after you restart Firefox" even after that I restarted.

  Hello

  I cannot install extensions, they appear with "will be installed after you restart Firefox" even after that I restarted.

  The 'Intermediary' folder is present and rest after a restart, but the extensions do not get installed. They show in the extensions page with the message "will be installed after you restart Firefox" and remain like that, no matter how many times I restart.

  Any idea?

  Under Firefox 24.0 Windows 8.1

  Thank you very much
  BD

  P.S. Just tried to install the add-on "convenience store" before asking the question and I got an error saying that it cannot install because it cannot change the necessary file. (I did manually instead)

  I tried to delete the files extensions.* nothing works. However, I deleted the addons.sqlite file and restarted my computer (computer not only Firefox) and that seemed to do the trick. Problem solved.

  Thank you for your help, it is appreciated.

• "Cannot install update and the error occurred ' iOS 9.3.2

  Try to upgrade to 9.3.2 but get "cannot install update and the error has occurred" if I am on WIFI or via iTunes. Someone else?

  Go to settings > general > storage & use iCloud > manage storage (the first) > and if there is an update, delete it. Then go to settings > general > Software Update and try again.

• Cannot install the update error

  I'm trying to update my iPhone 6 16 GB running iOS to iOS 9.3.1 9.2.1 but when I try to install the OTA update it says "cannot install the update." How could I solve this problem? The contact ID is not available because the unit is gray with a white screen and a contact ID button or space, which affects the update process?

  I would try to update via iTunes

  Connect the device using a cable to a computer (PC or Mac) running the latest version of iTunes 12.3.3

  The time that the phone is detected, choose software update

  If the phone is not detected - see here

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

  OR

  Please take a genius appointment at an Apple Store, or select another authorized service provider.

• Cannot install iOS 9.3.1

  I downloaded the updated iOS (9.3.1) but cannot install it.

  I made sure I got enough memory on my phone and the battery charge, but it will not install. Can someone help me?

  Thank you!

  Hi moppsy,.

  Thank you for using communities Support from Apple!

  Leave your post, sounds like you downloaded the iOS 9.3.1 update live, but have not been able to install it. We know that this type of situation can be frustrating, but we are here to help.

  To resolve this situation, I would recommend the work done these steps in the following article.

  Delete and redownload the update iOS

  If you can't always install the latest version of iOS, try to download the update again:

  1. Go to settings > general > storage & use of iCloud. Under storage tap manage storage.
  2. Find that the iOS to update in the list of applications.
  3. Press the update IOS, then remove the update.
  4. Go to settings > general > software update and download the latest iOS update.

  If the problem happens again, try to update with iTunes.

  Get help with updates of live iOS - Apple Support

  Best!

• Satellite L655-145 cannot install the bluetooth stack

  Cannot install bluetooth stack. Just Setup freeze. All other drivers installed successfully. Device Manager only show Bluetooth ACPI device. This problem appeared after the update of the BIOS of the original version 1.80 to more older (1.80-1.90-2.10-2.20 > > >). Downgrade from 1.80 take no effect.

  PS. Sorry for my bad English.

  Hello

  As far as I know the laptop is equipped with WIFI and Bluetooth combo card!
  This means that Wlan and BT functionality is controlled by a single card.

  If you BIOS outsider (don t know why) Please put failing first.
  Save the changes and reboot the laptop.

  Then download the BT BT Toshiba stack.
  Activate BT (FN + F8), then launch the installation of battery BT once more.

• Satellite P750 - 02Q 001 - cannot install the Bluetooth and Tuner DVB-T_ATSC Yuan

  I have more than 20 years and the first time ever answer concerning support for the installation of a driver... sheeezz

  Recently bought laptop below and formatting of disk with WIndows 7 ultimate + SP1 (64-bit)

  Australia
  TOSHIBA SATELLITE P750 - PSAY3A - 02Q 001

  Cannot install the latest drivers below (everything worked when bought the laptop):

  -Yuan DVB-T_ATSC Tuner driver (for TV Tuner model only) driver 2.3.3.31 Windows 7 64 - bit 2.9 MB
  -Bluetooth Stack for Windows by Toshiba Bluetooth 8.00.06 (T) Windows 7 64-bit 78,08 MB

  * DVB - T Tuner Driver *.
  The EXE file extracted in the temp folder and goes no further.
  The device driver shows "STK7700D" with an exclamation mark against it. See the image below.

  * Bluetooth Driver *.
  First installation install the original driver, then he received close to 50% through the installation (appears to fail to install the components of RF RFBUS).

  Then install attempt fails to go too far (is unable to install the driver at all).

  Third attempt and subsequent attempts to repeat the foregoing in order. Install it just gets to a point and is unable to go any further.

  I tried to disable all Wireless WAN and various other comments and try the install again. Repeats exactly as above!

  Refer to pictures:

  DEVICE MANAGER
  http://I52.Tinypic.com/35cr38i.jpg

  1ST COURSE SETUP
  http://I52.Tinypic.com/2r6jfv9.jpg

  2ND INSTALL PROGRESS
  http://i55.Tinypic.com/jgphfc.jpg

  see you soon

  Dennis

  > The EXE file extracted in the temp folder and goes no further.
  > The device driver shows "STK7700D" with an exclamation mark against it. See the image below

  Try to extract the exe from another place, not in the temp folder.
  In my case, I created a folder on a second partition (D) and have extracted the exe file in this folder. Can go to the Device Manager, and then can install the driver through the Device Manager.
  Choose the installation procedure advantage and point to the folder that contains the extracted files.

  With regard to the issue of the BT;
  Download the new battery of BT from here:
  http://APS2.toshiba-tro.de/Bluetooth/

  Then clean the registry using the CCleaner.
  This tool is freeware and can be downloaded on several different pages.
  So after cleaning check if you could install new BT of the register stack.