Cannot install KB982670

Similar Questions

• Error code: 643 (cannot install KB982670)

  This article does not solve the problem: http://support.microsoft.com/kb/KB976982

  The cleanup tool says that it succeeded and the. NET Framework 3.5 SP1has been installed properly.

  However, it fails with the error code 1310 to step to install the downloaded Update:

  .NET framework 1.1

  I still cannot install KB982670 without getting the error Code 643

  Thank you

  Hi outpaddling,
   
  Have you done SFC scan as suggested earlier?
   
  If you have done SFC scan and yet the problem persists, follow these steps:
   
  Create a system restore Point manually, in case a problem occurs during the execution of these steps, you can always perform aSystem Restore until you created last.
   
  You can access the link below to uninstall all versions of the .NET Framework on the computer and then reinstall all the versions of the .NET Framework on the computer.
   
  http://support.Microsoft.com/kb/923100
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Windows 7 - cannot install KB982670

  I try to use windows install for windows 7 in order to solve a problem of windows update.  However I do not know where Windows Installer for Windows 7.  Anyone know?

  Hello.

  The probem update is named KB982670, but his exact name is "Microsoft.NET Framework 4 Client Profile for Windows7 x 86".  I found thanks to Windows Installer.  I clicked "run" selected abd, but nothing seems to if be produced, other than a slight sound of Purring of a vent on the left side of my laptop, maybe.

  KB982670 is an option, not related to safety that may be hidden if you want updates:

  HOW to hide an update or restore a hidden update [good for Vista, too]

  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

• Cannot install iOS 10.0.1 with Apple Configurator 1.7.2

  Hello

  I have 60 iPads in 5 carts (12 per basket) that I need to install some applications on. They are already configured and supervised with Apple Configurator 1.7.2. I've never had problems in the past with AC1, I've always been able to install the updates and applications easily with very few questions, because of that I've never felt the need to update to AC2. However, this time during the update of ios and refreshment, I get the error 'complete with an error - cannot install iOS' 10.0.1 And now 12 of my iPads are stuck in recovery mode.

  I tried before wipe them off and re supervise them, but I always get the cannot install iOS 10.0.1 error, followed by all the iPads stuck in restore mode. I tried to update only 1 or 2 at a time. I tried the update/supervise them with no apps queued for installation. I tried to restore the iPad via iTunes, which works, but when I try to put it back on AC1, I still get the same error mode and recovery.

  I tried searching online for compatibility with the new iOS and AC 1 problems but found nothing.

  I would like to know if there is more information I should provide that might help.

  Thank you for your time.

  Ben

  Hi Ben

  Makes your iPad successfully update to IOS 10, we have approximately 400 ipads, I've updated a single ipad at 10 IOS using our MacBook pro AC1 OSX El Capitan to test, ill try another now and see if its success.

  When you connect an ipad update the Configurator re-download the IOS 10 or use a cached copy?

  How your Configurator is connected to the internet (behind Proxy, Wifi, Ethernet), perhaps the downloaded IPSW file is corrupted and need to be redownloaded removed\.

  Kind regards

  Rick

• Cannot install 9.3.5 iPad after two downloads

  Cannot install 9.3.5 for ipad

  HI I just wanted to know if it was on an ipad or a. Mac if it's an iPad plug support on a computer or go on http/www.apple.com

  Thank you

• Cannot install OS: "this identifier Apple has not yet been used.

  I just got my first Mac yesterday, a mid 2010 Macbook of opportunity. It's in great shape, works great, I was briefly very satisfied with my purchase. Then I tried to reformat/reinstall, as it does whenever purchasing a computer used.

  I followed the instructions here: https://support.apple.com/en-us/HT204904 and when I got to the step three, after the failure of the hard drive, it wouldn't let me install the operating system. He wanted to connect first with my Apple ID, so I did an Apple ID, but now it keeps giving me an error "this identifier Apple has not yet been used in the App store" and then it gives me the opportunity to cancel or "review". Click Cancel simply cancels the installation, just by clicking on review also cancels the installation.

  An ID is not necessary, but there is no way I can see to avoid it say the instructions on this page. It was suggested that maybe I could avoid the connection on the way to recovery, rather than recovery of the Internet, but the Cmd + R and Cmd + Option + R give recovery of the Internet. I don't see any way to get to the regular recovery.

  I had a suggestion to install from the disc, but I have not all discs. If I could download it from somewhere and burn them then that would be nice, but the instructions on this page are pretty clearly that it should not be necessary to use disks. I should be able to do without signing in.

  So... what upward with who? Where should I go from here? Is it possible to do a regular recovery? Or bypass the Apple ID thing?

  < published by host >

  "a mid 2010 Macbook opportunity."

  "Cannot install OS:" this identifier Apple has not yet been used.

  It's the property > change owner of a Mac of opportunity

• I cannot install extensions, they appear with "will be installed after you restart Firefox" even after that I restarted.

  Hello

  I cannot install extensions, they appear with "will be installed after you restart Firefox" even after that I restarted.

  The 'Intermediary' folder is present and rest after a restart, but the extensions do not get installed. They show in the extensions page with the message "will be installed after you restart Firefox" and remain like that, no matter how many times I restart.

  Any idea?

  Under Firefox 24.0 Windows 8.1

  Thank you very much
  BD

  P.S. Just tried to install the add-on "convenience store" before asking the question and I got an error saying that it cannot install because it cannot change the necessary file. (I did manually instead)

  I tried to delete the files extensions.* nothing works. However, I deleted the addons.sqlite file and restarted my computer (computer not only Firefox) and that seemed to do the trick. Problem solved.

  Thank you for your help, it is appreciated.

• "Cannot install update and the error occurred ' iOS 9.3.2

  Try to upgrade to 9.3.2 but get "cannot install update and the error has occurred" if I am on WIFI or via iTunes. Someone else?

  Go to settings > general > storage & use iCloud > manage storage (the first) > and if there is an update, delete it. Then go to settings > general > Software Update and try again.

• Cannot install the update error

  I'm trying to update my iPhone 6 16 GB running iOS to iOS 9.3.1 9.2.1 but when I try to install the OTA update it says "cannot install the update." How could I solve this problem? The contact ID is not available because the unit is gray with a white screen and a contact ID button or space, which affects the update process?

  I would try to update via iTunes

  Connect the device using a cable to a computer (PC or Mac) running the latest version of iTunes 12.3.3

  The time that the phone is detected, choose software update

  If the phone is not detected - see here

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

  OR

  Please take a genius appointment at an Apple Store, or select another authorized service provider.

• Cannot install iOS 9.3.1

  I downloaded the updated iOS (9.3.1) but cannot install it.

  I made sure I got enough memory on my phone and the battery charge, but it will not install. Can someone help me?

  Thank you!

  Hi moppsy,.

  Thank you for using communities Support from Apple!

  Leave your post, sounds like you downloaded the iOS 9.3.1 update live, but have not been able to install it. We know that this type of situation can be frustrating, but we are here to help.

  To resolve this situation, I would recommend the work done these steps in the following article.

  Delete and redownload the update iOS

  If you can't always install the latest version of iOS, try to download the update again:

  1. Go to settings > general > storage & use of iCloud. Under storage tap manage storage.
  2. Find that the iOS to update in the list of applications.
  3. Press the update IOS, then remove the update.
  4. Go to settings > general > software update and download the latest iOS update.

  If the problem happens again, try to update with iTunes.

  Get help with updates of live iOS - Apple Support

  Best!

• Satellite L655-145 cannot install the bluetooth stack

  Cannot install bluetooth stack. Just Setup freeze. All other drivers installed successfully. Device Manager only show Bluetooth ACPI device. This problem appeared after the update of the BIOS of the original version 1.80 to more older (1.80-1.90-2.10-2.20 > > >). Downgrade from 1.80 take no effect.

  PS. Sorry for my bad English.

  Hello

  As far as I know the laptop is equipped with WIFI and Bluetooth combo card!
  This means that Wlan and BT functionality is controlled by a single card.

  If you BIOS outsider (don t know why) Please put failing first.
  Save the changes and reboot the laptop.

  Then download the BT BT Toshiba stack.
  Activate BT (FN + F8), then launch the installation of battery BT once more.

• Satellite P750 - 02Q 001 - cannot install the Bluetooth and Tuner DVB-T_ATSC Yuan

  I have more than 20 years and the first time ever answer concerning support for the installation of a driver... sheeezz

  Recently bought laptop below and formatting of disk with WIndows 7 ultimate + SP1 (64-bit)

  Australia
  TOSHIBA SATELLITE P750 - PSAY3A - 02Q 001

  Cannot install the latest drivers below (everything worked when bought the laptop):

  -Yuan DVB-T_ATSC Tuner driver (for TV Tuner model only) driver 2.3.3.31 Windows 7 64 - bit 2.9 MB
  -Bluetooth Stack for Windows by Toshiba Bluetooth 8.00.06 (T) Windows 7 64-bit 78,08 MB

  * DVB - T Tuner Driver *.
  The EXE file extracted in the temp folder and goes no further.
  The device driver shows "STK7700D" with an exclamation mark against it. See the image below.

  * Bluetooth Driver *.
  First installation install the original driver, then he received close to 50% through the installation (appears to fail to install the components of RF RFBUS).

  Then install attempt fails to go too far (is unable to install the driver at all).

  Third attempt and subsequent attempts to repeat the foregoing in order. Install it just gets to a point and is unable to go any further.

  I tried to disable all Wireless WAN and various other comments and try the install again. Repeats exactly as above!

  Refer to pictures:

  DEVICE MANAGER
  http://I52.Tinypic.com/35cr38i.jpg

  1ST COURSE SETUP
  http://I52.Tinypic.com/2r6jfv9.jpg

  2ND INSTALL PROGRESS
  http://i55.Tinypic.com/jgphfc.jpg

  see you soon

  Dennis

  > The EXE file extracted in the temp folder and goes no further.
  > The device driver shows "STK7700D" with an exclamation mark against it. See the image below

  Try to extract the exe from another place, not in the temp folder.
  In my case, I created a folder on a second partition (D) and have extracted the exe file in this folder. Can go to the Device Manager, and then can install the driver through the Device Manager.
  Choose the installation procedure advantage and point to the folder that contains the extracted files.

  With regard to the issue of the BT;
  Download the new battery of BT from here:
  http://APS2.toshiba-tro.de/Bluetooth/

  Then clean the registry using the CCleaner.
  This tool is freeware and can be downloaded on several different pages.
  So after cleaning check if you could install new BT of the register stack.

• Cannot install Windows 7 on Envy 14-1211nr of HP recovery disc sent twice

  Cannot install Windows 7 on Envy 14-1211nr of HP recovery disc sent twice

  The Recovery Manager starts well. He correctly completed the following steps:
  1 format HDD

  2. copy the files from the CD to the drive. It copies all the 3 CD.

  Then he ask the driver (the 4th CD) CD. Once I have this CD, then after awhile I get messge below:

  Contact HP support

  In most cases, recover the hard disk will solve your problems.

  If your problem persists, you may have to contact HP support. Find details of support HO in the documentation of your PC.

  After that I see above meaage the only button I can click is "Finish". Once I click on finish, then in a minute, I get a message that "recovery completed successfully.

  The laptop restarts and displays the message on the screen "Bootmger" not found

  I called HP support and asked to run the hard drive and memory test and he succeeded.

  I can install windows on another CD I have with.

  But I can't install WIndows using the recovery CD, I received from HP. It's the 2nd CD series that I received these don't work or the other.

  I have two identical laptops. Tried installing on both and having the same problem on both.

  Can you please help with this.
  HP sends fake CDs?

  Kind regards

  Hello

  Here is another solution, you can try to see if you can get Windows 7 to install correctly.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• Satellite C50D-A-133 with Win7 - cannot install the USB 3.0 driver

  I Satellite, C50D-A-133 with Win 7 x 64 and cannot install the usb 3.0 drivers.
  I download the driver from the support site of toshiba for usb 3.0 for win7 x 64 and it starts to install the driver, but in the end it saids...
  Windows found driver software for your device but encountered an erroe trying to install it.
  AMD USB 3.0 host controller
  The system cannot find the specified file.

  I try to point the location of the driver but same error.
  Other drivers installed ok only gives error

  I ve downloaded and unzipped the driver and everything seems OK.
  As far as I know laptops equipped with platform AMD isn't chipset driver and after installing display driver must be installed USB driver.

  Try to download it again and start the installation manually.

• Re: NB100-12: cannot install Windows XP

  I cannot install the operating system to start, for a clean installation, the cd boots and seems to start installation, drivers etc. start loadind
  Then before you get to the point "want install you windows page, an error message appears saying my HARD drive is damaged or has a virus?"

  Any ideas?

  I can't really help, but I see the same problem :( I tried XP, 2000 and server 2003 installation CD. Either I get the same message you saw, or Installer Blue-screens.

  I've seen it suggested elsewhere to change the SATA in the BIOS from AHCI to compatibility, but that does not help either.

  I have to admit, it's as if the Windows Installer has problems see the hard drive, but I don't know what to do about this. Install a different disk drive, maybe?