Cannot install my software or drivers Lifecam VX-2000.

Similar Questions

• Cannot install new software because XP has said that there is another current installation

  I try to install the new software of the printer and it stops telling me that there is an another current facility and cannot install new software until the current instalation ends.  She does whenever I try to install new software.  He did it with zune, Quicken, etc.

  Hello

  1. have you you can all changes on the computer before this problem?

  Check if the problem persists in the clean boot state.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

• Satellite L300 - cannot install XP and need drivers SATA

  Hello

  Just download IMSM, I did nLite but still cannot install XP.
  I need good Manager Intel Matrix Storage Manager to Intel Mobile Chipset 45 or the SATA drivers.

  Please help me

  Intel Storage Manager, you can download on the Intel Web site. In the Readme file, you can see what chipsets are supported, but as far as I know the package contains drivers for all of the newer chipsets.

  The easiest way if you have a floppy drive, you must download the Configuration utility from floppy on Intel sites. This creates a floppy disk with the drivers.

  Otherwise, you must extract the .exe file. More information you can find in the readme file.

• Cannot install HP Software Solutions for C5550 on Vista

  I recently bought a new Photosmart C5550 all-in-one printer. I spent two full days, try to install the software on my Vista desktop. After countless hours on the phone with technical support to get the same results (fatal error & Windows Installer problems), I was told to contact the computer manufacturer. Another two hours on the phone with tech support and was told to reinstall Windows. I've done reluctantly. I received all of the updates in my installed security software and then tried the printer... same results as before reintsalling Windows. I tried to reformat once more, updates installed and then installed the printer drivers & software before installing security software. It actually installed and worked very well.  Last week, I discovered that there is an updated driver and software of the printer so I decided to install it, don't think not that I would have the same problems. Is it installed perfectly on my laptop (which she had done before), but would not install it on my desktop. After another few hours in line with the technical support I uninstalled all the software and printer drivers & stop all unnecessary processes (including security software), but still no luck. I am now without a printer on my desk and can't figure out what to do. I don't want to have to reformat again and try to install. I wonder if I uninstall my security software if it works because the printer seems to install without security software installed. Any help will be appreciated. Thank you!

  Just to update, I registered & re-recorded MSI before installing since that was the error message that I kept getting.

• Update to Windows 7 RTM failing - error 80070652 - cannot install new software or run Windows Update successfully.

  I upgraded from Win 7 RC for Win 7 RTM on my 64-bit machine from Dell and started installing all my software.  Everything was fine until I started Windows Update and had a list of 15 updates that needed to be done.  Several have had agreements that I had to accept, he wasn't the normal process of "update in the background.  I had to leave and is concerned to let the process of continuous updating on its own and potentially hang, so I cancelled it.

  Since then, I can't install any software or to upgrade my system.  Updates fail with the error message "WindowsUpdate_80070652" which seems to be undefined.  In some cases, I get an error message another installation is running and the current installation or update cannot be performed until the end of the current installation.

  I restarted my dozens of machine time and then immediately began installing or upgrading windows - without success.

  Any suggestions would be greatly appreciated.  It seems that there is a dead plant that does not block updates and installs.

  Jeff

  It is not an error "undefined":

  WindowsUpdate_80070652 = ErrorClientUpdateInProgress ERROR_INSTALL_ALREADY_RUNNING
  The program to be upgraded is may be missing or the patch may update a different version of the program

  You could always...

  Launch a collateral request for assistance free Windows Update:
  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• Cannot install recorder sony notebook drivers

  I have a Sony ICP-P320 digital voice recorder. I downloaded and uninstalled the program from the Sony Web site 10 times. It does not load the drivers. I followed all the links from windows to try to solve this problem. Any ideas?

  Hello
  1 have. what troubleshooting measures you tried so far?
  2. what happens when you try to load the drivers?
  3. what happens when you connect the Sony ICP-P320 digital voice recorder to the computer?
  4. are you able to install other programs or drivers?
  5 did you changes to the computer before the show?
  
   
  Method 1:
  Solve problems with programs that cannot be installed or uninstalled:
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall
   
  Method 2: Try to install the drivers in the State of clean boot and see if that helps.
  Reference:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135
  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

• Cannot install all software: error: an application not valid win 32

  I can't install any software and so or troubleshoot using microsoft fixit tool as they don't install it, analyses using malwarebytes and nothing came, iam at wits end.tried to use scandisk and cannot open it because of win 32 error and run as admin does not work either.

  Original title: the user interface have a pad with windows home premiun thinj lenovo and when I try to click on an icon I have an application not valid win 32

  Hello

  This problem may be caused by one of the options below.

  1. the file is corrupt, missing, or bad.

  2 file is not designed for your version of Windows.

  3. the file is a virus, worm or other malicious program file.

  4. incompatibility of hardware.

  Step 1: Check if the problem continues in a new user account.

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Step 2: If the problem does not persist in a new user account, then refer to the following article to fix a corrupted user account.

  Difficulty of a corrupt user profile: http://windows.microsoft.com/en-US/windows-vista/fix-a-corrupted-user-profile

• Having problems installing of software and drivers for HP Deskjet 9800

  I uninstalled my HP Deskjet 9800 because I have too many problems with it. I use Windows XP.  I went to hp.com and download the software and drivers for this printer. The software and drivers simply go to my folder of the downloaded files. How can I install this software for my printer work? Any help would be greatly appreciated. Thank you, Patricia

  The downloaded file is a .zip or .exe.  Go to your download folder (right click on start > explore, click the Folders icon and navigate to your folder) and then double-click the downloaded file.

  If it is a .zip file, it will create a folder.  Inside this folder is going to be a setup.exe file - double click on it.

  If it's a .exe file, double-clicking on it to launch the installer.

• Error when you try to install QuickTime: another installation is being run-cannot install new software

  Original title: another installation is being run-canot install new software.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I can't identify what software is running. I had this problem in recent weeks. It cannot install QuickTime.
  Thank you

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi marvinsadovsky,

  ·        What is the exact error you get when you try to install QuickTime?

  ·        You are able to install any other application?

  You try to install QuickTime by starting the computer in a clean boot state, because some background programs may interfere with the installation process. To put the computer in a clean boot state, follow the link below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install this software of HP Scanjet 3770HP Scanjet 3770 & Windows 8.0

  Unable to install the software from the HP Scanjet 3770 on my PC Toshiba laptop windows 8.0?

  If anyone can help with this?

  Hello

  Thanks for posting the query on the Microsoft Community Forums. You have reached the right place. Let us work together to find the cause of this problem and try to solve.

  As I see that there is no drivers for Scanner HP Scanjet 3770 flat. I suggest you to install the drivers for Flatbed Scanner HP Scanjet 3770 Windows Vista compatibility mode.

  Make the programs more compatible with this version of Windows
  http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows

  Post us the results after trying the steps above.

• Cannot install printer software

  Try to install the software for the new printer and it does not allow me to. I changed our main account user to the Administrators group and rebooted the computer and the error msg still appears when I try to install the software that I am not an administrator. I even tried to disable UAC temporarily to allow installation and the error msg always comes to the top. Any suggestions? Tried to create a new user to be admin, but it would not allow me to create.

  When you go to run Setup, right-click on it and select run as administrator from the context menu; you will need to provide your credentials for administrator (user name and password).

  Kind regards

• Cannot install old software under Win 7

  I just bought a Win 7 laptop to remove or replace a desktop XP computer. Initially, it came with Win 7 Home Premium. I could not install an earlier version of the software Quickbook, who previously installed and running well under XP or Vista.  See in-store technicians; they all recommend the upgrade to Win 7 Professional so that it can run the program in XP mode. After this upgrade, I can not install the software.

  QuickBook Setup starts with run 'install' which is supposed to launch setup.exe. the latter is supposed to install Quickbook under Win 7 Professional.

  I appreciate any help from this forum! More recent Quickbook ranking would be simple, but for the fact that the data file is accessible from many other user/computer with earlier versions of Windows. Old QuickBook does not recognize the new Quickbook data format.

  Windows XP Mode is installed?

  Please note that Windows XP Mode is a separate instance of Windows to be installed first, and then you need to install the software inside Quickbooks, which will then run the application from Windows 7. The following article will show you how to set up Windows XP Mode and how to virtualize your application (ignore the part about setting up hard assisted virtualization)

  Mobile: http://www.notebooks.com/2009/11/23/using-windows-virtual-pc-with-windows-xp-mode/

  If you have not yet downloaded Windows XP Mode:

  Both Windows XP Mode and Windows Virtual PC can be downloaded from http://www.windows.com/business/downloads.
  For more information about system requirements, please visit http://www.microsoft.com/virtual-pc

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Cannot install application software

  I acnt install software application such as adobe dream weavercs3, antivirus, JDK1.5 etc...

  Aamir Attari

  I acnt install software application such as adobe dream weavercs3, antivirus, JDK1.5 etc...

  Hello Amir

  You always struggle to install the software on your computer in Windows 7 RC?  We had several post on Adobe CS3 software installation problems.  You must ensure that you have no other product from Adobe installed before you try to install CS3.  If you have Flash, Shockwave, Acrobat is installed, they must be uninstalled.  Once you have removed Adobe programs, you should be able to install CS3.  What antivirus program you are trying to use?  It is one of the programs that have been tested and work with Windows 7?  Here is a link to a page of software compatibility to Microsoft Windows 7 RC:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/

  Let us know if these suggestions have you helped to resolve your problems.

  Thank you

  Jack

  Jack
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 1904 - cannot install the Software Desktop for blackBerry Smartphones

  I also had similar problems I've read on previous posts. I have four boxes of different error that arises when you try to install the software. I tried everything that was recommended at the previous posters, nothing helps.  Becoming very frustrated. I have a blackberry 8330 and windows xp. All reference failure to check of the diff dll errors. Any other suggestions?

  You may think using DTM WITHOUT Media Manager. Use the procedures to uninstall/install sdgardne, but download DTM without Media Manager.  Once done,

  Go to options-support card on your BB
  The settings should be:

  Media card support: on
  Encryption mode: no
  Mass storage Mode support: on
  Auto enable mass storage Mode when connected: Yes

  Once activated, when you connect your BB via the usb port, a windows Explorer will open and show your device as another drive on your pc. Then, you can simply drag-and - drop your photos, videos, music, documents between your pc and the BB.

• HP Photosmart C6180 all-in-one: cannot install the software drivers for HP c6180 all in one

  Hello
  I almost thought he drivers directly from the HP site but not this errors.
  
  Also when I try to detect the HP printer, it does not find and my machine is wireless.
  
  When I try and add a PRINTER via the Control Panel, it does not show the printer in the list?
  
  Strange?
  I think I'll plug the laptop directly and see what happens? But what can I get lead to?

  Everything that fact.
  Kept the drivers installed and it worked, did the wireless connectivity, and all is well.
  
  Thank you